{"title":"4ms Company","description":null,"products":[{"product_id":"4ms-company-shifting-inverting-signal-mingler","title":"4ms Company Shifting Inverting Signal Mingler","description":"\u003cp\u003eThe \u003cstrong\u003e4MS SISM\u003c\/strong\u003e is a 4-channel voltage manipulator that can scale, invert, attenuate, shift (dc offset), mix, split, and slice your CV and audio signals.\u003c\/p\u003e  \u003cp\u003eA plethora of red and blue LEDs (14) show exactly what each channel and output jack is doing: red = negative voltage, blue = positive.\u003c\/p\u003e  \u003cp\u003eEach channel is independent and has an input jack, output jack, a knob for attenuating\/inverting (Scale), and a knob for applying positive or negative DC offset (Shift).\u003c\/p\u003e  \u003cp\u003eFour jacks on the bottom combine the four channels in different ways. Mix is a straight mix of all four shifted inputs, Switched Mix is a mix of all channels that have nothing plugged into the OUT jack, Positive Slice is the sum of all output voltages greater than zero volts, and Negative Slice is the sum of all negative voltages.\u003c\/p\u003e  \u003cp\u003eBy Shifting some channels positive and some negative, the + Slice and - Slice jacks can be used as sub-mix outputs. Also, by running a slow triangle wave into one channel, the remaining channels can be made to \"dirty pan\" between the Slice jacks: the signals are half-wave rectified as they span between both outputs.\u003c\/p\u003e  \u003cp\u003eChannels 1+2 and 3+4 are normalized together on the input jacks, which is handy for splitting a signal into two or more altered forms. Jumpers on the back allow you to disable this normalization.\u003c\/p\u003e  \u003cp\u003eEach channel also has a jumper to make the Scale knob unipolar (no inverting, attenuate only). This is useful for mixing audio instead of CV. A breakout header allows for padding of the signal (useful for fine-tuning a precise voltage such as 1V\/oct).\u003c\/p\u003e  \u003cp\u003eInput and Output headers for connecting to QCD, QPLFO, VCA Matrix, or other manufacturer's modules such as Toppobrillo Mixiplexer or Circuit Abbey Intermix.\u003c\/p\u003e     \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eModule size:\u003c\/li\u003e \u003cli\u003eThe SISM is 12HP and 0.86 inches (22mm) deep.\u003c\/li\u003e \u003cli\u003ePower consumption\u003c\/li\u003e \u003cli\u003e+12V rail: 51mA max\u003c\/li\u003e \u003cli\u003e-12V rail: 51mA max\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449918910567,"sku":"57578","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-sism_57578_1_new_ca562335-0a34-43cf-a838-7c00fbae0f46.jpg?v=1787090951"},{"product_id":"4ms-company-quad-clock-distributor-rev-2","title":"4ms Company Quad Clock Distributor - Rev 2","description":"\u003cp\u003eThe \u003cstrong\u003e4MS Quad Clock Distributor\u003c\/strong\u003e is a four channel voltage controlled Clock Divider\/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack. With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain \"Master\" clock module, and\/or a complex rhythmic pattern generator.\u003c\/p\u003e     \u003ch3\u003eVideos:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eModule size:\u003c\/li\u003e \u003cli\u003eThe QCD is 10HP and 1.0 inches (26mm) deep.\u003c\/li\u003e \u003cli\u003eAll pots have a metal shaft and nut.\u003c\/li\u003e \u003cli\u003ePower consumption:\u003c\/li\u003e \u003cli\u003eA jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/li\u003e \u003cli\u003e+12V rail:\u003c\/li\u003e \u003cli\u003e48mA with jumper selecting external 5V\u003c\/li\u003e \u003cli\u003e88mA with jumper selecting internal 5V.\u003c\/li\u003e \u003cli\u003e+5V rail:\u003c\/li\u003e \u003cli\u003e41mA with jumper selecting external 5V\u003c\/li\u003e \u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e \u003cli\u003e-12V rail:\u003c\/li\u003e \u003cli\u003e40mA\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449918943335,"sku":"57579","price":239.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-quad-clock-distributor.jpg?v=1787090952"},{"product_id":"4ms-company-qcd-expander","title":"4ms Company QCD Expander","description":"\u003cp\u003eThe \u003cstrong\u003e4MS QCD Expander\u003c\/strong\u003e is an expansion module for the Quad Clock Distributor (QCD). The QCD Expander adds a host of features, turning the QCD into a programmatic non-linear sequencer. Each channel gets a CV Trigger Delay (Pulse Width) jack and knob, an additional output jack with three selectable modes, and attenuverters for all CV input jacks. Self-patched evolving rhythms and swing\/shuffle patterns are easily obtained, as well as complete control over standard rhythmic patterns.\u003c\/p\u003e     \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eModule size:\u003c\/li\u003e \u003cli\u003eThe QCD Expander is 12HP and 0.98\" (25mm) deep.\u003c\/li\u003e \u003cli\u003e\u003cp\u003eFour knobbed pots have a metal shaft and nut. Eight knobless pots are center-detent with white indicator line.\u003c\/p\u003e\u003c\/li\u003e \u003cli\u003e\u003cp\u003ePower consumption:\u003c\/p\u003e\u003c\/li\u003e \u003cli\u003e+12V rail: 44mA max\u003c\/li\u003e \u003cli\u003e+5V rail: not used\u003c\/li\u003e \u003cli\u003e-12V rail: 30mA max\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449918976103,"sku":"57580","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-qcd-expander-new_e7fcdf50-cc27-4e0e-9a22-19ec9c90e76c.jpg?v=1787090952"},{"product_id":"4ms-company-vca-matrix","title":"4ms Company VCA Matrix","description":"\u003cp\u003eThe \u003cstrong\u003e4ms VCA Matrix\u003c\/strong\u003e is a playable 4x4 matrix of 16 VCAs.\u003c\/p\u003e  \u003cp\u003eFour CV or audio inputs can be routed in any amount\/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e4 CV\/audio inputs and 4 outputs (buffered and dc-coupled)\u003c\/li\u003e \u003cli\u003eFull range (0Hz - 20kHz) for both Control and Signal inputs, allows for AM effects, etc.\u003c\/li\u003e \u003cli\u003e16 VCA's using high quality SSM chips\u003c\/li\u003e \u003cli\u003eAttenuation\/gain range from -100dB (mute) to 0dB (unity). Up to +20dB boost with trimpot adjustment.\u003c\/li\u003e \u003cli\u003ePlayable surface with 16 latching Mute LED buttons, used to mute each VCA individually (Mute button disconnects Control jack and Level knob, and fully attenuates the VCA)\u003c\/li\u003e \u003cli\u003eLED button brightness indicates amount of attenuation and Control CV signal\u003c\/li\u003e \u003cli\u003e16 Control jacks for VCA level control\u003c\/li\u003e \u003cli\u003e16 Level knobs attenuate the incoming Control signals. The Level knobs act as manual level controls when nothing is plugged into the Control jack\u003c\/li\u003e \u003cli\u003eExponential VCA response in low control voltage range, pseudo-log response in higher voltage range.\u003c\/li\u003e \u003cli\u003e\"Soft Limit\" effect limits gain to prevent clipping, while still responding to higher Control voltages with more \"punch\" and wider pulses\u003c\/li\u003e \u003cli\u003eMatrix Expandability: VCA Matrices can be connected to form a larger matrix using headers on the back (4x8, 8x8, 12x4, etc)\u003c\/li\u003e \u003cli\u003eControl Expandability: 16-pin header on back side of PCB allows an external device to control all VCAs: e.g. patch recall, patch sequencing, preset patterns such as quadrature panning, etc.\u003c\/li\u003e \u003cli\u003eSuitable as a 4x4 mixer, splitter, dynamic signal router, limited waveshaper, etc.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cp\u003eModule size: The VCA Matrix is 26HP, and 1.0 inches deep (25mm)\u003c\/p\u003e  \u003ch3\u003ePower consumption:\u003c\/h3\u003e  \u003cp\u003eA jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e-12V rail: 110mA max\u003c\/li\u003e \u003cli\u003e+12V rail:\u003c\/li\u003e \u003cli\u003e80 max with jumper selecting external 5V\u003c\/li\u003e \u003cli\u003e110mA max with jumper selecting internal 5V.\u003c\/li\u003e \u003cli\u003e+5V rail:\u003c\/li\u003e \u003cli\u003e40mA max with jumper selecting external 5V\u003c\/li\u003e \u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921433703,"sku":"57679","price":375.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-vca-matrix_57679_1_new_71678b55-8117-41e6-af21-4b02b79f21e5.jpg?v=1787090962"},{"product_id":"4ms-company-tremulus-lune","title":"4ms Company Tremulus Lune","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Tremulus\u003c\/strong\u003e is a compact tremolo effect pedal.\u003c\/p\u003e     \u003ch3\u003eSpecs\u003c\/h3\u003e  \u003cp\u003e: * True-bypassed with LED indicator (3PDT stomp) * Die-cast 4\"x3\"x2\" aluminum box\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921466471,"sku":"57695","price":153.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-tremulous-lune_57695_1_new_afb52bc8-bc82-4999-a9e4-495e1c71883b.jpg?v=1787090962"},{"product_id":"4ms-company-spectral-multiband-resonator","title":"4ms Company Spectral Multiband Resonator","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Spectral Multiband Resonator\u003c\/strong\u003e is an innovative resonant filter which can process audio like a classic filter bank, ring like a marimba when plucked\/struck, vocode, re-mix tracks, harmonize, output spectral data, quantize audio to scales, and much more... A gorgeous ring of colored lights displays the frequency of each filter, as well as the levels and current scale selection(s).\u003c\/p\u003e  \u003cp\u003eAt a glance, the SMR works like a normal six-band graphic EQ: six frequency band-pass filters are mixed together using sliders. Resonance\/Q is variable, which changes the \"ringy-ness\" or width of the bands.\u003c\/p\u003e  \u003cp\u003eBut here's where comparison stops. The frequency of each channel is treated like a note in a scale, and the six bands form a chord. Spin the Rotate knob and the \"notes\" circle around the scale, rotating back to the bottom once they've reached the top. Adjust Spread and the distance (interval) between each note changes. Triggers for up\/down motion, CV inputs for sequencing and scale selection allow for flexible control with external modules. Morph, which automatically cross-fades between frequencies, together with variable Slew allows rhythmic clocks drive the SMR as a variable-speed evolving resonant filter.\u003c\/p\u003e  \u003cp\u003eAt maximum Resonance\/Q, the SMR can be struck like a gong or marimba by inputting clocks or triggers. The frequency of each channel is quantized to a scale: beautiful chords, ethereal tones and eerie ambiance flows easily. With lower resonance, the SMR can pull out particular frequency bands, and sweep these across the spectrum.\u003c\/p\u003e  \u003cp\u003eTwo 1V\/octave Frequency jacks allow for tracking even and\/or odd bands and creating floating melodies over evolving chord bases, or complex percussive membrane sounds.\u003c\/p\u003e  \u003cp\u003eSave your settings into one of six storage banks, and recall on the fly. On startup, the SMR instantly jumps to the last saved settings. The color scheme of the lights can be adjusted, so if you prefer all white lights on your modular, you can have that (or all red, or rainbows, pastels, etc..)!\u003c\/p\u003e     \u003ch3\u003eAdvanced features:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eProgram your own scale. The frequency of each of the 20 notes can be assigned by setting the octave, the semi-tone, and coarse and fine micro-tone. Up to 11 scales can be saved permanently in the user bank\u003c\/li\u003e \u003cli\u003eAdjust color scheme of the LEDs. Pick a pre-programmed color scheme or create your own using the sliders to set Red\/Green\/Blue values. Custom color schemes can be saved permanently\u003c\/li\u003e \u003cli\u003eSave your settings in one of six parameter banks. Note position, scale and bank selection, Q value, Lock settings and color scheme can be saved and recalled on the fly. On startup, the SMR loads settings from the last saved bank.\u003c\/li\u003e \u003cli\u003eOptional alternative filter type for a more exponential decay when plucked and different timbral qualities. Freq jacks no longer track 1V\/oct in this mode.\u003c\/li\u003e \u003cli\u003eSlider LEDs can be assigned to display level for each channel (combination of slider position and CV on the jack), or clipping for each channel.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e26HP Eurorack module\u003c\/li\u003e \u003cli\u003e0.95\" module depth (24mm)\u003c\/li\u003e \u003cli\u003ePower consumption:\u003c\/li\u003e \u003cli\u003e+12V rail: 86mA maximum (110mA max when jumper set to +12V)\u003c\/li\u003e \u003cli\u003e-12V rail: 28mA maximum\u003c\/li\u003e \u003cli\u003e+5V rail: 25mA maximum (0mA [not used] when jumper set to +12V)\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eControls, Inputs and Outputs:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSix sliders control level of filter\u003c\/li\u003e \u003cli\u003eWhite LED on each slider indicates gain (selectable to indicate clipping)\u003c\/li\u003e \u003cli\u003eSix CV inputs for level of each filter (slider attenuates CV on jack)\u003c\/li\u003e \u003cli\u003eTwenty full-color LEDs indicate which filters are assigned to which channels\u003c\/li\u003e \u003cli\u003eColor on LED ring match colors of Env Out LEDs\u003c\/li\u003e \u003cli\u003eBrightness of each LED shows level of each filter\u003c\/li\u003e \u003cli\u003eQ (Resonance) knob\u003c\/li\u003e \u003cli\u003eQ (Resonance) CV jack\u003c\/li\u003e \u003cli\u003eStereo input and output (divided into even\/odd bands)\u003c\/li\u003e \u003cli\u003eOdd input jack and Even output jack serve as Mono in\/out\u003c\/li\u003e \u003cli\u003eRotate Clockwise and Rotate Counter-clockwise trigger jacks\u003c\/li\u003e \u003cli\u003eRotate CV input jack maps any waveshape to a rotation pattern\u003c\/li\u003e \u003cli\u003eScale CV input jack selects scale from current bank\u003c\/li\u003e \u003cli\u003eSpread knob sets the interval (spacing) between channels\u003c\/li\u003e \u003cli\u003eSpread CV input jack\u003c\/li\u003e \u003cli\u003eMorph knob sets speed of cross fading rotating or spreading\u003c\/li\u003e \u003cli\u003eMorph CV input jack\u003c\/li\u003e \u003cli\u003eSix CV outputs follow envelope of frequency content per band\u003c\/li\u003e \u003cli\u003eFast | Slow switch selects envelope tracking speed, or Trigger output mode\u003c\/li\u003e \u003cli\u003ePre\/Post switch selects whether Env Out jacks track the filter before or after the slider attenuates\u003c\/li\u003e \u003cli\u003eSix Lock buttons lock the frequency of each channel\u003c\/li\u003e \u003cli\u003eButton is lit when locked\u003c\/li\u003e \u003cli\u003eTurning Q knob while holding a lock button also locks the Q value (button flashes to indicate Q-lock)\u003c\/li\u003e \u003cli\u003eLock jack toggles lock status of even or odd channels\u003c\/li\u003e \u003cli\u003e1V\/oct Frequency input jack for even and odd channels\u003c\/li\u003e \u003cli\u003eOdds Switch selects if 1V\/oct Freq jack, Freq Nudge knob, and Lock jack control all odd channels (1\/3\/5) or just channel 1\u003c\/li\u003e \u003cli\u003eEvens Switch selects if 1V\/oct Freq jack, Freq Nudge knob, and Lock jack control all even channels (2\/4\/6) or just channel 6\u003c\/li\u003e \u003cli\u003eSlew switch enables slew-limiting of incoming CV on the level CV jacks (click and pop prevention).\u003c\/li\u003e \u003cli\u003eAmount of slew limiting is proportional to Morph setting at the time the switch is flipped on.\u003c\/li\u003e \u003cli\u003eScale Rotation switch enables filters to rotate into the next scale each time they rotate fully around\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921532007,"sku":"57684","price":475.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-spectral-multiband-resonator_57684_1_92907757-0c9e-4aad-8d1c-ad32885d8c48.jpg?v=1787090962"},{"product_id":"4ms-company-sweptoner","title":"4ms Company Sweptoner","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Sweeptoner\u003c\/strong\u003e is a filter effect pedal with tone sweep, envelope generator and more.\u003c\/p\u003e     \u003ch3\u003eSpecs\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eTrue-bypassed with LED indicator (3PDT stomp)\u003c\/li\u003e  \u003cli\u003eDie-cast 7\"x4\"x2\" aluminum box\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921499239,"sku":"57693","price":345.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-sweeptoner_57693_1_84c6e0e5-9866-443c-bdd9-35f7e9c21678.jpg?v=1787090962"},{"product_id":"4ms-company-stereo-panneur","title":"4ms Company Stereo Panneur","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Stereo Panneur\u003c\/strong\u003e is a full featured tremolo guitar pedal with stereo functionality.\u003c\/p\u003e     \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eBypass stomp with LED indicator (3PDT stomp)\u003c\/li\u003e \u003cli\u003eSeparate true-bypassing stomps optional\u003c\/li\u003e \u003cli\u003eTwo LEDs flash to the tempo of each LFO\u003c\/li\u003e \u003cli\u003eJacks: Left\/mono input, Right input, Left output, Right output\u003c\/li\u003e \u003cli\u003eDie-cast 7\"x4\"x2\" aluminum box. Solid color with text labels\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921564775,"sku":"57694","price":194.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-stereo-panneur_57694_1_c97b1a75-a496-4ff2-b9d1-84fda35e6aa0.jpg?v=1787090962"},{"product_id":"4ms-company-shuffling-clock-multiplier","title":"4ms Company Shuffling Clock Multiplier","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Shuffling Clock Multiplier (SCM)\u003c\/strong\u003e produces eight multiplied clock tempos from a single input clock, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled\/swung. The amount of shuffle is controlled by a CV Slip jack. A Rotate CV jack re-assigns the multiplication number of each jack. More features of the SCM can be controlled by the SCM Breakout.\u003c\/p\u003e     \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cp\u003eModule size: The SCM is 4HP and 35mm (1.39\") deep\u003c\/p\u003e  \u003cp\u003ePower consumption:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e5VSEL Jumper set to INT:\u003c\/li\u003e \u003cli\u003e33mA maximum power draw from +12V rail\u003c\/li\u003e \u003cli\u003e0mA max on the +5V rail\u003c\/li\u003e \u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e \u003cli\u003e5VSEL Jumper set to EXT:\u003c\/li\u003e \u003cli\u003e19mA maximum power draw on the +12V rail\u003c\/li\u003e \u003cli\u003e14mA max on the +5V rail\u003c\/li\u003e \u003cli\u003e4mA maximum power draw on the -12V rai\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921597543,"sku":"57681","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-shuffling-clock-multiplier-new_08c77250-f509-4e09-93b6-2a881a50e0e4.jpg?v=1787090963"},{"product_id":"4ms-company-scm-breakout","title":"4ms Company SCM Breakout","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Shuffling Clock Multiplier (SCM)\u003c\/strong\u003e produces eight multiplied clock tempos from a single input clock, ranging from x1 to x8 (x32 by using the Breakout). Some of the outputs can be shuffled\/swung. The amount of shuffle is controlled by a CV Slip jack. A Rotate CV jack re-assigns the multiplication number of each jack. More features of the SCM can be controlled by the SCM Breakout.\u003c\/p\u003e     \u003ch3\u003eModule size:\u003c\/h3\u003e  \u003cp\u003eThe SCM is 4HP and 35mm (1.39\") deep\u003c\/p\u003e  \u003ch3\u003ePower consumption:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e5VSEL Jumper set to INT:\u003c\/li\u003e \u003cli\u003e33mA maximum power draw from +12V rail\u003c\/li\u003e \u003cli\u003e0mA max on the +5V rail\u003c\/li\u003e \u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e \u003cli\u003e5VSEL Jumper set to EXT:\u003c\/li\u003e \u003cli\u003e19mA maximum power draw on the +12V rail\u003c\/li\u003e \u003cli\u003e14mA max on the +5V rail\u003c\/li\u003e \u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921630311,"sku":"57683","price":150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-scm-breakout_57683_new_b3bcf9c8-4271-4991-8ddd-25adf6cd044a.jpg?v=1787090962"},{"product_id":"4ms-company-rotating-clock-divider-rev-2","title":"4ms Company Rotating Clock Divider - Rev 2","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Rotating Clock Divider (RCD)\u003c\/strong\u003e produces eight divided clock tempos from a single input clock. The divisions range from \/1 to \/64, including all odd and non-standard divisions such as \/3 and \/17 and \/62. A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation. A Reset input jack helps to sync\/start with an external clock.\u003c\/p\u003e     \u003ch3\u003eModule size:\u003c\/h3\u003e  \u003cp\u003eThe RCD is 4HP and 35mm (1.39\") deep\u003c\/p\u003e  \u003ch3\u003ePower consumption:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e5VSEL Jumper set to INT:\u003c\/li\u003e \u003cli\u003e33mA maximum power draw from +12V rail\u003c\/li\u003e \u003cli\u003e0mA max on the +5V rail\u003c\/li\u003e \u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e \u003cli\u003e5VSEL Jumper set to EXT:\u003c\/li\u003e \u003cli\u003e19mA maximum power draw on the +12V rail\u003c\/li\u003e \u003cli\u003e14mA max on the +5V rail\u003c\/li\u003e \u003cli\u003e4mA maximum power draw on the -12V rail\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921663079,"sku":"57680","price":178.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-rotating-clock-divider.jpg?v=1787090963"},{"product_id":"4ms-company-rcd-breakout","title":"4ms Company RCD Breakout","description":"\u003cp\u003eThe \u003cstrong\u003e4ms RCD Breakout\u003c\/strong\u003e adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power.\u003c\/p\u003e\u003ch3\u003eModule size:\u003c\/h3\u003e\u003cp\u003eThe RCD is 4HP and 48mm (1.85\")\u003c\/p\u003e\u003ch3\u003ePower consumption:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e+12V rail: __mA\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003e-12V rail: not used\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921695847,"sku":"57682","price":81.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-rcd-breakout-new_71269782-97c9-4391-b112-ead589ebd6e2.jpg?v=1787090963"},{"product_id":"4ms-company-quad-pingable-lfo","title":"4ms Company Quad Pingable LFO","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Quad Pingable LFO\u003c\/strong\u003e is a compact, playable four-channel tap-tempo, clock-syncable LFO with variable skew and reset.\u003c\/p\u003e\u003cp\u003eThe QPLFO is designed to be useful in small portable systems that require maximum functionality in minimal space, as well as large systems that need maximum modulation sources.\u003c\/p\u003e\u003ch3\u003eControls and jacks\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTap tempo button (\"Ping\") for manually setting the tempo\u003c\/li\u003e\n\u003cli\u003ePing jack sets tempo with an external clock (any complex signal can be used as a clock)\u003c\/li\u003e\n\u003cli\u003eOn\/mute button enables or mutes the output (latching button)\u003c\/li\u003e\n\u003cli\u003eSkew knob and CV jack control the waveshape by altering the ratio between rise and fall times\u003c\/li\u003e\n\u003cli\u003eAt 0% Skew (0V of CV), the shape is a \"plucky\" near-expo curve\u003c\/li\u003e\n\u003cli\u003eAt 1% Skew (just over 0V of CV), the shape is ramp-down\u003c\/li\u003e\n\u003cli\u003eAt 50% Skew (about 5V of CV), the shape is a triangle\u003c\/li\u003e\n\u003cli\u003eAt 100% Skew (about 10V of CV), the shape is ramp-up\u003c\/li\u003e\n\u003cli\u003eSkew knob provides offset to the incoming CV signal, so any range of CV is acceptable\u003c\/li\u003e\n\u003cli\u003eReset jack restarts the LFO without changing the tempo (rising edge triggered)\u003c\/li\u003e\n\u003cli\u003eOUT jack outputs either a 0 to 10V waveshape, or a -5V to +5V waveshape (jumper selectable)\u003c\/li\u003e\n\u003cli\u003eLED flashes and dims to the signal on the OUT jack\u003c\/li\u003e\n\u003cli\u003eTap tempo button flashes to the internal tap-tempo clock or to incoming pulses on the Ping jack\u003c\/li\u003e\n\u003cli\u003eOn\/Mute button lights up when channel is On\u003ch3\u003eAdvanced\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePing and Reset inputs use comparators, so any waveshape can be used for triggering (audio waves, complex LFOs, even the QPLFO itself!) Trim-pot on PCB allows for adjustment of comparator threshold value\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\"Fire-on-unmute\" jumper per channel:When this optional jumper is installed, pressing the On button to turn the channel on will reset the LFO.If the jumper is not installed (factory default), pressing On will unmute the LFO without resetting (LFO runs in the background when muted)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBipolar\/Unipolar jumper:\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003eSetting jumper to Bipolar makes the outputs -5V to +5V\u003c\/li\u003e\n\u003cli\u003eSetting jumper to Unipolar makes the outputs 0V to +10V\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOne jumper controls all four channels\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOne-shot mode: Reset jack can be used to trigger a one-shot envelope if the external ping clock is stopped. See manual for detailed discussion\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFloating Reset mode: Holding a high gate on Reset jack allows the waveshape to run freely without automatically re-syncing to the ping clock. A bare cable plugged into the jack causes a high gate\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eConnects to other modules using ribbon cables:\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003eOutputs can connect to the 4ms VCA Matrix, or the 4ms SISM, the Circuit Abbey Intermix or the Toppobrillo Mixiplexer\u003c\/li\u003e\n\u003cli\u003eNormalization of ping jacks can connect to the 4ms Quad Clock Distributor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModule size:\u003c\/h3\u003e\u003cp\u003eThe QPLFO is 12HP and 1.57 inches (40mm) deep.\u003c\/p\u003e\u003ch3\u003ePower consumption:\u003c\/h3\u003e\u003cp\u003eA jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e+12V rail:\u003c\/li\u003e\n\u003cli\u003e89mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003e154mA max with jumper selecting internal 5V.\u003c\/li\u003e\n\u003cli\u003e+5V rail:\u003c\/li\u003e\n\u003cli\u003e65mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e\n\u003cli\u003e-12V rail:\u003c\/li\u003e\n\u003cli\u003e73mA max\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921728615,"sku":"57677","price":250.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-quad-pingable-lfo-new_e15959e5-2a26-439a-a727-5f675fc6e35c.jpg?v=1787090963"},{"product_id":"4ms-company-pingable-envelope-generator","title":"4ms Company Pingable Envelope Generator","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Pingable Envelope Generator (PEG)\u003c\/strong\u003e is a dual envelope generator whose envelope lengths are set by incoming clocks or \"pings\".\u003c\/p\u003e\u003cp\u003eThe PEG has full CV control of envelope shape, skew, and ping (clock) division\/multiplication, as well as a plethora of triggering and cycling options (AD, AR, quantization, cycle), and a tap tempo button for each channel.\u003c\/p\u003e\u003ch3\u003eScaling\/shifting:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eScale knob is an attenuating inverter for main envelope output (Maximum 0V to +10V non-inverted, and Minimum -10V to 0V inverted).\u003c\/li\u003e\n\u003cli\u003eBi-polar button centers main envelope output around 0V (-5V to +5V output)\u003c\/li\u003e\n\u003cli\u003e\"+5V ENV\" jack is a non-scaling output that always produces a 0V to +5V envelope, regardless of Scale and Bi-polar settings\u003c\/li\u003e\n\u003cli\u003e\"OR\" jack outputs an analog OR of the two scaled envelope curves. This outputs the highest value from either envelope at any given moment, taking into account the Scale and Bi-polar controls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGate outputs:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnd-of-Rise (EOR) gate output goes high when envelope finishes a rise portion, and goes low when envelope begins a rise portion\u003c\/li\u003e\n\u003cli\u003eEnd-of-Fall (EOF) gate output goes high when envelope finishes a fall portion, and goes low when envelope begins a fall portion\u003c\/li\u003e\n\u003cli\u003eJumper for each channel changes EOR output to a Half-Rise gate output. The Half-Rise jack goes high when 50% of the time of the rise portion has elapsed, and goes low after 50% of the time of the fall portion. Using the Skew parameter, this jack provides a variable phase gate output useful for quadrature effects and clock phase shifting and trigger delay effects. Factory setting is EOR for red channel, Half-Rise for blue channel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTriggering\/cycling:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCycle button for each channel forces envelope to self-cycle in sync with the ping clock (LFO mode). Button lights up when in cycle mode.\u003c\/li\u003e\n\u003cli\u003e\"T\" jack toggles the state of both channels' Cycle button when a gate is applied\u003c\/li\u003e\n\u003cli\u003e\"QNT\" jack for each channel triggers an envelope to start at the next quantized beat, with respect to the divided\/multiplied ping clock. Holding a gate high on this jack causes the envelope to repeat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\"Async\" jack for each channel causes an envelope to output immediately (asynchronously). Holding a gate high results in an AR envelope (rise-sustain-fall). If cycle mode is enabled, the envelope will continue to cycle at this new phase with respect to the ping clock. Phase can be reset to being in sync with the ping clock by pressing the cycle button or applying a pulse to the QNT jack.\u003c\/p\u003e\n\u003ch3\u003eCV input jacks:\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCV control of Ping Div\/Mult, Skew, and Curve using the CV jacks. Respective knobs set the center offset for the applied CV\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003eCV of 0-10V will modulate the parameter's full range However, a 0-5V CV will modulate the parameter within a very useful range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModule size:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThe PEG is 20HP and 1.0 inches (26mm) deep.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePower consumption:\u003c\/h3\u003e\u003cp\u003eA jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e+12V rail:\u003c\/li\u003e\n\u003cli\u003e60mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003e105mA max with jumper selecting internal 5V.\u003c\/li\u003e\n\u003cli\u003e+5V rail:\u003c\/li\u003e\n\u003cli\u003e40mA max with jumper selecting external 5V\u003c\/li\u003e\n\u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e\n\u003cli\u003e-12V rail:\u003c\/li\u003e\n\u003cli\u003e35mA max\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921761383,"sku":"57678","price":345.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pingable-envelope-generator-new_e90c61e4-afed-413c-9a6e-498aa9d84cec.jpg?v=1787090963"},{"product_id":"4ms-company-nocto-loco","title":"4ms Company Nocto Loco","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Nocto Loco\u003c\/strong\u003e is an octave pedal capable of going as low at three octaves down in pitch. It can also function as a tremolo effect with the Pulse and Speed knobs.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921794151,"sku":"57696","price":240.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-nocto-loco_57696_1_82d4ef1b-44c7-4b0d-b143-3833f0dbef93.jpg?v=1787090963"},{"product_id":"4ms-company-dual-looping-delay","title":"4ms Company Dual Looping Delay","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Dual Looping Delay (DLD)\u003c\/strong\u003e is an advanced audio processor for creative synthesis. Not a tape or analog emulation but a modern crystal-clear digital delay, the DLD combines features of delay, looping, and sample-tight synchronization for powerful and dynamic sound capture and modification. The DLD is designed to integrate seamlessly with modular timebase and sequencing devices such as the 4ms Quad Clock Distributor (QCD), etc.\u003c\/p\u003e\u003ch3\u003eWhat is a \"Looping Delay\"?\u003c\/h3\u003e\u003cp\u003eModern looping devices grew directly from hardware digital delays of the late 70s and early 80s. A looping delay, modeled on units such as the classic Lexicon PCM42, has the very long storage times associated with dedicated looping, but without triggered record and playback functions.By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythmic devices\u003c\/p\u003e\u003ch3\u003eSpecs:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 HP Eurorack format module\u003c\/li\u003e\n\u003cli\u003e0.98\" (25mm) maximum depth with power cable\u003c\/li\u003e\n\u003cli\u003ePower consumption:\u003c\/li\u003e\n\u003cli\u003e+12V rail: 188mA max (jumper set to 5V)\u003c\/li\u003e\n\u003cli\u003e-12V rail: 48mA max\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003eConnect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER\u003c\/li\u003e\n\u003cli\u003eAudio Inputs\u003c\/li\u003e\n\u003cli\u003e0Hz (DC) to 24kHz\u003c\/li\u003e\n\u003cli\u003e16.8V peak-to-peak maximum before clipping (when AC coupled)\u003c\/li\u003e\n\u003cli\u003eOptional jumper to choose DC or AC coupling on input.\u003c\/li\u003e\n\u003cli\u003eAudio Outputs\u003c\/li\u003e\n\u003cli\u003e0Hz (DC) to 24kHz with maximum -1.7dB difference between input and output (see technical specification section)\u003c\/li\u003e\n\u003cli\u003e+10.5V to -10.5V maximum output\u003c\/li\u003e\n\u003cli\u003eSoft limiting compression allows for saturation before clipping (can be disabled)\u003c\/li\u003e\n\u003cli\u003eClock outputs (Main, Loop A, Loop B):\u003c\/li\u003e\n\u003cli\u003e0V to 8.2V\u003c\/li\u003e\n\u003cli\u003e+\/- 2.4us maximum jitter (i.e. 0.001% at 120 BPM)\u003c\/li\u003e\n\u003cli\u003eRise or Fall time: \u0026lt;1us\u003c\/li\u003e\n\u003cli\u003ePulse Width (Trigger mode) 22ms\u003c\/li\u003e\n\u003cli\u003eGate mode 50% (square wave)\u003c\/li\u003e\n\u003cli\u003eAt clock speeds faster than 22Hz, the clock output becomes 50% duty cycle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921826919,"sku":"57685","price":415.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-dual-looping-delay-1_3572586b-ffd0-45f5-b38c-303565aaa96f.jpg?v=1787090964"},{"product_id":"4ms-company-cv-phaseur-moire","title":"4ms Company CV Phaseur Moire","description":"\u003cp\u003eThe 4\u003cstrong\u003ems Phaseur Moire CV\u003c\/strong\u003e is a feature laden phaser pedal with different waveforms and the ability to blend between a lush chorus-y sweep to a seasick, pitch vibrato.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003cp\u003ePlease inquire about pedal availability before ordering, lead times may vary artwork will differ from pedal shown.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921892455,"sku":"57691","price":375.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-phaseur-moire_57691_1_dbee781d-2499-4b59-8093-600c093fa738.jpg?v=1787090964"},{"product_id":"4ms-company-mini-swash","title":"4ms Company Mini Swash","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Mini Swash\u003c\/strong\u003e is a guitar pedal that explores the heart of a noise circuit and is capable of self-oscillation, third stage clipping and much more.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921859687,"sku":"57690","price":230.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-mini-swash_57690_1_a76da2d5-c827-4c39-967a-6e004ed375c2.jpg?v=1787090963"},{"product_id":"4ms-company-cv-max-tweaker-swash","title":"4ms Company CV Max Tweaker Swash","description":"\u003cp\u003eThe \u003cstrong\u003e4ms CV Max Tweaker Swash\u003c\/strong\u003e is a guitar pedal that explores the sweet spot of a noise circuit.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eSwash: sweetspot heart of the noise circuit\u003c\/li\u003e \u003cli\u003eNoisegait: music-noise flow control\u003c\/li\u003e \u003cli\u003ePregain: first stage gain\u003c\/li\u003e \u003cli\u003ePreclip: second stage diode clipping select\u003c\/li\u003e \u003cli\u003ePostgain: third stage gain\u003c\/li\u003e \u003cli\u003ePostclip: third stage clipping select\u003c\/li\u003e \u003cli\u003eBass: rumbling low-end\u003c\/li\u003e \u003cli\u003eLow power: simulates low battery, each setting is a whole new swash\u003c\/li\u003e \u003cli\u003eSelf-oscillation: amount of internal feedback\u003c\/li\u003e \u003cli\u003eSelf-osc stomp: kicks self-osc in\/out (with LED)\u003c\/li\u003e \u003cli\u003eVolume: plenty of it!\u003c\/li\u003e \u003cli\u003eLFO: A rhythmic wave swashes uncertain characteristics of the noise in and out. Speed knobs, flashing LED, on\/off switch\u003c\/li\u003e \u003cli\u003eLFO on\/off switch: Stomp LFO modulation in and out\u003c\/li\u003e \u003cli\u003eTame\/Trouble: Select between classic swash (trouble) and complete silence in bypass (tame)\u003c\/li\u003e \u003cli\u003eNoisevol: Gain of noise signal, effects self-oscillations (prior to master volume)\u003c\/li\u003e \u003cli\u003eExternal Audio: Modulate the noise with a second input jack\u003c\/li\u003e \u003cli\u003eNoisevol: Gain of noise signal, effects self-oscillations (prior to master volume)\u003c\/li\u003e \u003cli\u003eClean vol: Volume of clean signal\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eTrue-bypassed with LED indicator (3PDT stomp)\u003c\/li\u003e \u003cli\u003eDie-cast 7\"x4\"x2\" aluminum box\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921925223,"sku":"57686","price":345.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-tweaker-swash_57686_1_1821c6ca-1f99-43ad-9238-d056aa0d5c7a.jpg?v=1787090964"},{"product_id":"4ms-company-buffered-mult","title":"4ms Company Buffered Mult","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Buff Mult\u003c\/strong\u003e is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.\u003c\/p\u003e     \u003ch3\u003eModule size:\u003c\/h3\u003e  \u003cp\u003eThe 4ms Buffered Mult is 3HP and 0.75 inches (18mm) deep.\u003c\/p\u003e  \u003cp\u003ePower consumption:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e+12V rail: 13mA\u003c\/li\u003e \u003cli\u003e-12V rail: 13mA\u003c\/li\u003e \u003cli\u003e+5V rail: Not used (0mA)\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44449921957991,"sku":"57676","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-buffered-mult_57676_new.jpg?v=1787090964"},{"product_id":"4ms-company-dual-looping-delay-demo-deal","title":"4ms Company Dual Looping Delay (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Dual Looping Delay (DLD)\u003c\/strong\u003e is an advanced audio processor for creative synthesis. Not a tape or analog emulation but a modern crystal-clear digital delay, the DLD combines features of delay, looping, and sample-tight synchronization for powerful and dynamic sound capture and modification. The DLD is designed to integrate seamlessly with modular timebase and sequencing devices such as the 4ms Quad Clock Distributor (QCD), etc.\u003c\/p\u003e\u003ch3\u003eWhat is a \"Looping Delay\"?\u003c\/h3\u003e\u003cp\u003eModern looping devices grew directly from hardware digital delays of the late 70s and early 80s. A looping delay, modeled on units such as the classic Lexicon PCM42, has the very long storage times associated with dedicated looping, but without triggered record and playback functions.By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythmic devices\u003c\/p\u003e\u003ch3\u003eSpecs:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 HP Eurorack format module\u003c\/li\u003e\n\u003cli\u003e0.98\" (25mm) maximum depth with power cable\u003c\/li\u003e\n\u003cli\u003ePower consumption:\u003c\/li\u003e\n\u003cli\u003e+12V rail: 188mA max (jumper set to 5V)\u003c\/li\u003e\n\u003cli\u003e-12V rail: 48mA max\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003eConnect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER\u003c\/li\u003e\n\u003cli\u003eAudio Inputs\u003c\/li\u003e\n\u003cli\u003e0Hz (DC) to 24kHz\u003c\/li\u003e\n\u003cli\u003e16.8V peak-to-peak maximum before clipping (when AC coupled)\u003c\/li\u003e\n\u003cli\u003eOptional jumper to choose DC or AC coupling on input.\u003c\/li\u003e\n\u003cli\u003eAudio Outputs\u003c\/li\u003e\n\u003cli\u003e0Hz (DC) to 24kHz with maximum -1.7dB difference between input and output (see technical specification section)\u003c\/li\u003e\n\u003cli\u003e+10.5V to -10.5V maximum output\u003c\/li\u003e\n\u003cli\u003eSoft limiting compression allows for saturation before clipping (can be disabled)\u003c\/li\u003e\n\u003cli\u003eClock outputs (Main, Loop A, Loop B):\u003c\/li\u003e\n\u003cli\u003e0V to 8.2V\u003c\/li\u003e\n\u003cli\u003e+\/- 2.4us maximum jitter (i.e. 0.001% at 120 BPM)\u003c\/li\u003e\n\u003cli\u003eRise or Fall time: \u0026lt;1us\u003c\/li\u003e\n\u003cli\u003ePulse Width (Trigger mode) 22ms\u003c\/li\u003e\n\u003cli\u003eGate mode 50% (square wave)\u003c\/li\u003e\n\u003cli\u003eAt clock speeds faster than 22Hz, the clock output becomes 50% duty cycle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450035794023,"sku":"64521","price":365.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-dual-looping-delay-1_1_be6112b9-3b23-48e8-b263-c5b60ec625a3.jpg?v=1787091419"},{"product_id":"4ms-company-vca-matrix-demo-deal","title":"4ms Company VCA Matrix (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003e4ms VCA Matrix\u003c\/strong\u003e is a playable 4x4 matrix of 16 VCAs.\u003c\/p\u003e  \u003cp\u003eFour CV or audio inputs can be routed in any amount\/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute buttons.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e4 CV\/audio inputs and 4 outputs (buffered and dc-coupled)\u003c\/li\u003e \u003cli\u003eFull range (0Hz - 20kHz) for both Control and Signal inputs, allows for AM effects, etc.\u003c\/li\u003e \u003cli\u003e16 VCA's using high quality SSM chips\u003c\/li\u003e \u003cli\u003eAttenuation\/gain range from -100dB (mute) to 0dB (unity). Up to +20dB boost with trimpot adjustment.\u003c\/li\u003e \u003cli\u003ePlayable surface with 16 latching Mute LED buttons, used to mute each VCA individually (Mute button disconnects Control jack and Level knob, and fully attenuates the VCA)\u003c\/li\u003e \u003cli\u003eLED button brightness indicates amount of attenuation and Control CV signal\u003c\/li\u003e \u003cli\u003e16 Control jacks for VCA level control\u003c\/li\u003e \u003cli\u003e16 Level knobs attenuate the incoming Control signals. The Level knobs act as manual level controls when nothing is plugged into the Control jack\u003c\/li\u003e \u003cli\u003eExponential VCA response in low control voltage range, pseudo-log response in higher voltage range.\u003c\/li\u003e \u003cli\u003e\"Soft Limit\" effect limits gain to prevent clipping, while still responding to higher Control voltages with more \"punch\" and wider pulses\u003c\/li\u003e \u003cli\u003eMatrix Expandability: VCA Matrices can be connected to form a larger matrix using headers on the back (4x8, 8x8, 12x4, etc)\u003c\/li\u003e \u003cli\u003eControl Expandability: 16-pin header on back side of PCB allows an external device to control all VCAs: e.g. patch recall, patch sequencing, preset patterns such as quadrature panning, etc.\u003c\/li\u003e \u003cli\u003eSuitable as a 4x4 mixer, splitter, dynamic signal router, limited waveshaper, etc.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSpecs:\u003c\/h3\u003e  \u003cp\u003eModule size: The VCA Matrix is 26HP, and 1.0 inches deep (25mm)\u003c\/p\u003e  \u003ch3\u003ePower consumption:\u003c\/h3\u003e  \u003cp\u003eA jumper selects using +5V from the power supply, or generating +5V on-board from the +12V rail.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e-12V rail: 110mA max\u003c\/li\u003e \u003cli\u003e+12V rail:\u003c\/li\u003e \u003cli\u003e80 max with jumper selecting external 5V\u003c\/li\u003e \u003cli\u003e110mA max with jumper selecting internal 5V.\u003c\/li\u003e \u003cli\u003e+5V rail:\u003c\/li\u003e \u003cli\u003e40mA max with jumper selecting external 5V\u003c\/li\u003e \u003cli\u003enot used (0mA) with jumper selecting internal 5V.\u003c\/li\u003e \u003c\/ul\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450035826791,"sku":"64526","price":337.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-company-vca-matrix_57679_1_1_58a09218-91ef-4acc-8142-c8452cb6c951.jpg?v=1787091419"},{"product_id":"4ms-dual-looping-delay-w-2x-vk-eurorack-cables-24","title":"4ms Company Dual Looping Delay w\/2x VK Eurorack Cables - 24\"","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Dual Looping Delay\u003c\/strong\u003e (DLD) is an advanced audio processor for creative synthesis. Not a tape or analog emulation but a modern crystal-clear digital delay, the DLD combines features of delay, looping, and sample-tight synchronization for powerful and dynamic sound capture and modification. The DLD is designed to integrate seamlessly with modular timebase and sequencing devices such as the 4ms Quad Clock Distributor (QCD), etc.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eWHAT IS A \"LOOPING DELAY\"?\u003c\/h3\u003e\r\n\r\n\u003cp\u003eModern looping devices grew directly from hardware digital delays of the late 70s and early 80s. A looping delay, modeled on units such as the classic Lexicon PCM42, has the very long storage times associated with dedicated looping, but without triggered record and playback functions.By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythmic devices\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003ch3\u003eSPECIFICATIONS:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e20hp Eurorack format module\u003c\/li\u003e\r\n\u003cli\u003e0.98\" (25 mm) maximum depth with power cable\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003ePower consumption:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e+12 V rail: 188 mA max (jumper set to 5V)\u003c\/li\u003e\r\n\u003cli\u003e-12 V rail: 48 mA max\u003c\/li\u003e\r\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\r\n\u003cli\u003eConnect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12 V and POWER\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eAudio Inputs\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e0 Hz (DC) to 24 kHz\u003c\/li\u003e\r\n\u003cli\u003e16.8 V peak-to-peak maximum before clipping (when AC coupled)\u003c\/li\u003e\r\n\u003cli\u003eOptional jumper to choose DC or AC coupling on input.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eAudio Outputs\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e0 Hz (DC) to 24 kHz with maximum -1.7 dB difference between input and output (see technical specification section)\u003c\/li\u003e\r\n\u003cli\u003e+10.5 V to -10.5 V maximum output\u003c\/li\u003e\r\n\u003cli\u003eSoft limiting compression allows for saturation before clipping (can be disabled)\u003c\/li\u003e\r\n\u003cli\u003eClock outputs (Main, Loop A, Loop B):\u003c\/li\u003e\r\n\u003cli\u003e0 V to 8.2 V\u003c\/li\u003e\r\n\u003cli\u003e±2.4us maximum jitter (i.e. 0.001% at 120 BPM)\u003c\/li\u003e\r\n\u003cli\u003eRise or Fall time: \u0026lt;1us\u003c\/li\u003e\r\n\u003cli\u003ePulse Width (Trigger mode) 22ms\u003c\/li\u003e\r\n\u003cli\u003eGate mode 50% (square wave)\u003c\/li\u003e\r\n\u003cli\u003eAt clock speeds faster than 22Hz, the clock output becomes 50% duty cycle\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eINCLUDES 2X 24\" VINTAGE KING EURORACK CABLES: PROFESSIONAL, RUGGED, USA-MADE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWe know you need excellent, reliable cables that don't cost a fortune. That's why we designed our own line of premium Vintage King cabling, made right here in Detroit, Michigan. We teamed up with a local manufacturer to pick the very best cabling and components to build our rugged-tough cables, purposefully designed for the most demanding studio and performance applications. With our cables, you get better value without compromising sound or quality.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eFREE LIFETIME REPLACEMENT WARRANTY\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWe believe in our cables and stand behind them with a FREE lifetime warranty. Unless you've done something crazy like cut them in half, we'll replace them for life. Go ahead and put your Vintage King cables to the test. In the event you ever need to use our warranty, the process is easy and hassle free. Just contact us and we'll take care of everything right away.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450037071975,"sku":"64586","price":415.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-dual-looping-delay-w-cables_64586_1_3728bcfe-8920-4f16-a29a-34dee7376df7.jpg?v=1787091424"},{"product_id":"4ms-company-dual-triggered-sampler","title":"4ms Company Stereo Triggered Sampler Module","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Stereo Triggered Sampler\u003c\/strong\u003e is a high fidelity, two-channel stereo sample recorder and playback module. The STS can record high quality stereo files, while simultaneously playing two different stereo files. A maximum of 600 samples can be loaded from the removable\/swappable microSD card, in a variety of formats up to 96 kHz\/32-bit\/stereo WAV. All sample parameters (1V\/oct pitch, sample file selection, length, and start position) are CV controllable.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eTWO INDEPENDENT PLAYBACK CHANNELS\u003c\/h3\u003e\r\n\u003cp\u003eEach playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file. These are powerful tools for re-arranging a sample, joining multiple samples, and creating dynamically re-sized loops within a larger sample. Combined with the Play Trigger jack and the 1V\/oct jack, the STS can be two complete multi-timbral pitch-tracked stereo voices! There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eRECORDING CHANNEL\u003c\/h3\u003e\r\n\u003cp\u003eWhether you patched 47 modules to create the ultimate percussive blast, or you want to capture your four hour ambient performance, recording high-quality .wav files on the STS is simple. Just hit the REC button or fire a trigger and a new stereo .wav file will be created on the SD card. Do as many takes as you need: the STS never deletes your files. Re-ordering or re-arranging samples into banks is easy, even without a computer. You can even fill a bank with 10 different variations and immediately use them for playback. By default the STS records at 44.1 kHz\/16-bit, with an option for 24-bit (a future update may increase the sample rate to 96kHz)\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eFILE ORGANIZATION\u003c\/h3\u003e\r\n\u003cp\u003eUsing a computer is completely optional with the STS, since samples can be recorded directly to the module and placed into the bank of your choosing. But for users with large existing sample banks, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. You never have to rename your files again!\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450121023591,"sku":"77422","price":450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-stereo-triggered_77422_1_709ce79e-100a-40a1-8aa7-9efea2057de1.jpg?v=1787091780"},{"product_id":"4ms-company-tapographic-delay","title":"4ms Company Tapographic Delay","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Tapographic Delay\u003c\/strong\u003e is a complex multi-tap delay in the Eurorack format with a unique interface designed for live performance. It excels at transforming the simplest audio (a drone, a percussive sound) into complex rhythmic structures, meshes of organic textures, lush harmonic mille-feuilles, liquid and resonant effects.\u003c\/p\u003e\r\n\r\n\u003cp\u003eHave you ever got tired of the monotonous repetitions that your standard delay pedal\/module produced? Have you ever wished for a more complex rhythmic structure than just decaying repetition? If yes, you have come to the right place: the Tapographic Delay is an advanced effect that lets you handle repetition in a completely novel way. It is to a traditional delay what a full rhythmic sequencer (with pattern recall, velocity control, tactile input) is to a simple clock. With the TD, you interactively define the rhythm that the repetitions will follow: a velocity-sensitive sensor allows you to record, edit, modify, and sequence your own arrangements of delays. In a sense, the TD is the converse of the classic Frippertronics sound-on-sound setup popularized by Robert Fripp in the 70s: you don't play the guitar, you play the tape loop!\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Tapographic Delay is an expressive experimental instrument meant to be played in real-time, rather than a set-and-forget end-of-chain effect. Interact with it! Experiment! Push it to its limits!\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450197307495,"sku":"79724","price":415.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-tapographic-delay_79724_1_282e8dc5-392d-49e5-bb89-6f6fd363b2f2.jpg?v=1787092084"},{"product_id":"4ms-row-power-40-eurorack-power-supply","title":"4ms Row Power 40 Eurorack Power Supply","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Row Power 40 Eurorack Power Supply\u003c\/strong\u003e is a clean, regulated, and protected power solution for Eurorack systems.\r\nA single Row Power module can power a small system, and multiple Row Powers can be daisy-chained to power a large system using a single power brick.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSimply plug a laptop-style universal power supply into the Row Power panel and connect your modules via Flying Bus cables or a Bus Stick.\r\nYou can even daisy-chain multiple Row Powers to use a single power brick for multiple rows. Each row will be independently regulated and protected for ultra-low cross-talk.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450256552039,"sku":"97969","price":155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-row-power_97969_1_ce47e8f5-b389-427f-bd2a-4b48a8f0f340.jpg?v=1787092341"},{"product_id":"4ms-power-brick-90w-ac-power-adapter","title":"4ms Power Brick 90W AC Power Adapter","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Power Brick\u003c\/strong\u003e is a 15-20 V, 90 W, 2.1 mm barrel plug (5.5 mm outer diameter), positive center power adapter.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450266480743,"sku":"97970","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-power-brick_97970_1_751bd0c7-bc56-4472-8aa9-0cd3f617e703.jpg?v=1787092378"},{"product_id":"4ms-flying-bus-cables-passive-power-distribution-cables","title":"4ms Flying Bus Cables Passive Power Distribution Cables","description":"\u003cp\u003e\u003cstrong\u003e4ms Flying Bus Cables Passive Power Distribution Cables\u003c\/strong\u003e (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules. Can be daisy-chained if extra headers are needed. Two 14\" flying bus cables with a total of 13 male header pins.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450266513511,"sku":"97968","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-flying-bus-cables_97968_1_67416e37-1ed0-42bf-a51e-f4f684cbcba1.jpg?v=1787092378"},{"product_id":"4ms-wav-recorder","title":"4ms WAV Recorder","description":"\u003cp\u003eThe \u003cstrong\u003e4ms WAV Recorder\u003c\/strong\u003e is a high-fidelity, two-channel stereo audio recorder with basic playback features. Accepting a wide range of input signals, from line-level to modular-level, the WAV Recorder stores audio onto a microSD card in lossless .wav format up to 96 kHz\/24-bit. The trigger jack can be used for capturing rhythmic loops or synchronizing multiple WAV Recorder modules for multi-track recording. In Playback mode, the trigger jack or button plays the most recent recording. A simple file\/folder navigation system can be used to browse the folders on the card for playing back .wav files. A Gain knob allows for up to +20 dB of boost, and an LED Signal Meter indicates clipping and the signal level.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450293612647,"sku":"103060","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-wav-recorder_103060_1_72caf60e-d4a6-41f2-a932-8ca07f211777.jpg?v=1787092490"},{"product_id":"4ms-company-pod60-unpowered","title":"4ms Company Pod60 Eurorack Enclosure - Unpowered","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod60 Unpowered\u003c\/strong\u003e is 60HP with 1.34\" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Unpowered Pods do not include a power supply and must be provided with a DIY solution or a module power supply such as the Row Power.\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363244647,"sku":"111200","price":85.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod60-up_111200_1_082dfc72-3642-4b84-a80d-c0a2741969b2.jpg?v=1787092754"},{"product_id":"4ms-company-pod60","title":"4ms Company Pod60 Eurorack Enclosure","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod60\u003c\/strong\u003e is a low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments. The Pod60 is 60HP with 1.34\" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick. Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods. The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363310183,"sku":"111199","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod60_111199_1.jpg?v=1787092754"},{"product_id":"4ms-company-pod32-unpowered","title":"4ms Company Pod32 Eurorack Enclosure - Unpowered","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod32 Unpowered\u003c\/strong\u003e is 32HP with 1.34\" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Unpowered Pods do not include a power supply and must be provided with a DIY solution or a module power supply such as the Row Power.\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363342951,"sku":"111198","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod32-up_111198_1_63142e4f-ae00-4c1d-9afe-55700dcea6da.jpg?v=1787092755"},{"product_id":"4ms-company-pod26-unpowered","title":"4ms Company Pod26 Eurorack Enclosure - Unpowered","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod26 Unpowered\u003c\/strong\u003e is 26HP with 1.34\" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Unpowered Pods do not include a power supply and must be provided with a DIY solution or a module power supply such as the Row Power.\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363375719,"sku":"111196","price":60.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod26-up_111196_1_6e7b9182-46ac-4d6f-8bf2-064b3671f0a6.jpg?v=1787092755"},{"product_id":"4ms-company-pod32","title":"4ms Company Pod32 Eurorack Enclosure","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod32\u003c\/strong\u003e is a low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments. The Pod32 is 32HP with 1.34\" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick. Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods. The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363408487,"sku":"111197","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod32_111197_1.jpg?v=1787092754"},{"product_id":"4ms-company-pod26","title":"4ms Company Pod26 Eurorack Enclosure","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod26\u003c\/strong\u003e is a low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments. The Pod26 is 26HP with 1.34\" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick. Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods. The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363441255,"sku":"111195","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod26_111195_1.jpg?v=1787092755"},{"product_id":"4ms-company-pod20-unpowered","title":"4ms Company Pod20 Eurorack Enclosure - Unpowered","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod20 Unpowered\u003c\/strong\u003e is 20HP with 1.34\" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Unpowered Pods do not include a power supply and must be provided with a DIY solution or a module power supply such as the Row Power.\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363474023,"sku":"111194","price":55.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod20-up_111194_1_a730130f-dd31-46f2-ae32-4fa88a966e4c.jpg?v=1787092755"},{"product_id":"4ms-company-pod20","title":"4ms Company Pod20 Eurorack Enclosure","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod20\u003c\/strong\u003e is a low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments. The Pod20 is 20HP with 1.34\" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick. Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods. The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450363506791,"sku":"111193","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod20_111193_1_1e7d1fc4-49ac-462d-a0e9-7fbb2960344e.jpg?v=1787092755"},{"product_id":"4ms-company-listen-in-out","title":"4ms Company Listen IO","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Listen IO\u003c\/strong\u003e is a simple module which gets signals in and out of a Eurorack system by converting to and from normal modular levels. The top section converts any external signal to modular levels by providing up to 30x gain (+30 dB), allowing you to use table-top synthesizers, keyboards, phones\/tablets, computers, toys, microphones, etc. in your patches. The bottom section does the opposite: modular signals are converted to normal line level signals. The bottom two jacks can be used as line outs or as headphone jacks, so you and a friend can listen in stereo at the same time.\u003c\/p\u003e\r\n\r\n\u003cp\u003eEach section has two inputs and outputs for use with a stereo signal or two mono signals. An LED bar graph for each output shows the signal level and clipping.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450386247783,"sku":"114757","price":125.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-listen-io_114757_1.jpg?v=1787092851"},{"product_id":"4ms-company-listen-4-quarters","title":"4ms Company Listen Four Quarters","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Listen Four Quarters\u003c\/strong\u003e is a four channel stereo mixer with 1\/4\" (6.35mm) TRS balanced outputs and 1\/8\" (3.5mm) headphones output. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four Quarters can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450386280551,"sku":"114754","price":209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-listen-four-quarters_114754_1.jpg?v=1787092851"},{"product_id":"4ms-company-listen-4","title":"4ms Company Listen four","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Listen Four\u003c\/strong\u003e is a four channel low-noise mixer with stereo 1\/8\" line-level or modular-level outputs, and an 1\/8\" headphone output. Two mono channels with Pan knobs, and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. It features ultra-low noise, with typical -100 dB signal-to-noise ratio in real-world tests. Virtually no background noise or hiss, quiet pots, and smooth panning curves. The Listen 4 can be daisy-chained to other Listen modules and\/or the WAV Recorder.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450386313319,"sku":"114753","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-listen-four_114753_1.jpg?v=1787092851"},{"product_id":"4ms-company-pod48x-unpowered","title":"4ms Company Pod48X Eurorack Enclosure - Unpowered","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Pod48X Unpowered\u003c\/strong\u003e is 48HP with 2\" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Unpowered Pods do not include a power supply and must be provided with a DIY solution or a module power supply such as the Row Power.\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450406301799,"sku":"116777","price":80.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod48x-unpowered_116777_1_f59cb7e0-2d41-48de-a857-47e2ef773f99.jpg?v=1787092935"},{"product_id":"4ms-company-pod48x","title":"4ms Company Pod48X Eurorack Enclosure","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Pod48X\u003c\/strong\u003e is 48HP with 2.00\" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.\u003c\/p\u003e  \u003cp\u003eThe Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick.\u003c\/p\u003e  \u003cp\u003eEach Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The Pod48X's power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450406269031,"sku":"116776","price":155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod48x_116776_1_9d5d941d-e006-4cba-9987-3c9e5fcd5cfa.jpg?v=1787092935"},{"product_id":"4ms-company-pod40x-unpowered","title":"4ms Company Pod40X Eurorack Enclosure - Unpowered","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Pod40X Unpowered\u003c\/strong\u003e is 40HP with 2\" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Unpowered Pods do not include a power supply and must be provided with a DIY solution or a module power supply such as the Row Power.\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450406367335,"sku":"116775","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod40x-unpowered_116775_1_6f3a3640-a056-4623-b95f-18940079ceea.jpg?v=1787092935"},{"product_id":"4ms-company-pod40x","title":"4ms Company Pod40X Eurorack Enclosure","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Pod40X\u003c\/strong\u003e is 40HP with 2.00\" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.\u003c\/p\u003e  \u003cp\u003eThe Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick.\u003c\/p\u003e  \u003cp\u003eEach Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450406432871,"sku":"116774","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod40x_116774_1.jpg?v=1787092935"},{"product_id":"4ms-power-brick-45w-ac-power-adapter","title":"4ms Power Brick 45W AC Power Adapter","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Power Brick 45W AC Power Adapter\u003c\/strong\u003e is a power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450408693863,"sku":"117352","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-power-brick_117352_1_ad8e0ca4-1f18-4eca-9df7-a83b2adcef0e.jpg?v=1787092945"},{"product_id":"4ms-company-multi-power-cable-16-pin","title":"4ms Company Multi Power Cable - 16-pin","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Multi Power Cable - 16-pin\u003c\/strong\u003e 16-conductor ribbon cable with four 16-pin connectors (20\" total length) for connecting more than 2 modules in a Pod.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450417410151,"sku":"118126","price":6.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-barrel-multi-power-cable-16-pin_118126_1_02c04be1-7e19-4e80-a721-fb450c6cdd68.jpg?v=1787092977"},{"product_id":"4ms-company-multi-power-cable-10-pin","title":"4ms Company Multi Power Cable - 10-pin","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Multi Power Cable - 10-pin\u003c\/strong\u003e is a 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20\" total length) for connecting more than 2 modules in a Pod.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450417475687,"sku":"118125","price":6.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-barrel-multi-power-cable-10-pin_118125_1_c3e754a8-a9a0-4db1-9b98-9c8a9b88b02c.jpg?v=1787092977"},{"product_id":"4ms-company-barrel-power-cable-right-angle","title":"4ms Company Barrel Power Cable - Right Angle","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Barrel Power Cable - Right Angle\u003c\/strong\u003e features a right angle 2.1 mm barrel plug (5.5 mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and\/or Pods. Cable is 11\" long (center of tip to center of tip), suitable for two Pods next to each other or in front\/behind each other. Also compatible with Row Power modules.\u003c\/p\u003e\r\n\r\n\u003cp\u003eBoth ends of the cable have a right-angle plug.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450417442919,"sku":"118124","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-barrel-cable-right-angle_118124_1_7e65354c-66db-4ed7-91cb-17515c158fa1.jpg?v=1787092978"},{"product_id":"4ms-company-spherical-wavetable-navigator","title":"4ms Company Spherical Wavetable Navigator","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Spherical Wavetable Navigator\u003c\/strong\u003e is a six-channel synthesizer that makes it easy to create slowly morphing drones, polyphonic melodies, evolving sequences, and rich textures. The SWN features six wavetable oscillators with independent pitch, level, and waveform controls. Six LFOs (Low Frequency Oscillators) can be used as modulation sources and\/or envelopes, making it easy to add dynamic motion to your patch. Each channel is a full voice and can be “played” using the top row of buttons, the internal LFOs, or note-change detection on the 1V\/oct jacks. The SWN ships with 12 three-dimensional (spherical) wavetables and an easy interface which allows you to record and edit custom wavetables from live audio. Open-source software for Mac, Windows, and Linux called SphereEdit can be freely downloaded and allows you computer to create, edit, and convert .wav files into Spherical wavetables to transfer into the SWN with an audio cable.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450420457575,"sku":"118130","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-swn_118130_1.jpg?v=1787092989"},{"product_id":"4ms-company-pod32-demo-deal","title":"4ms Company Pod32 (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003e4ms Company Pod32\u003c\/strong\u003e is a low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments. The Pod32 is 32HP with 1.34\" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.\u003c\/p\u003e  \u003cp\u003e4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick. Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.\u003c\/p\u003e  \u003cp\u003eMix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!\u003c\/p\u003e  \u003cp\u003eMade from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered!)\u003c\/p\u003e  \u003cp\u003ePods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.\u003c\/p\u003e  \u003cp\u003ePods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods. The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.\u003c\/p\u003e","brand":"4ms Company","offers":[{"title":"Default Title","offer_id":44450432319591,"sku":"120251","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/4ms-pod32_111197_1_1_77c24ec4-5262-4d28-8ae1-16e64885783c.jpg?v=1787093040"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/4ms-company.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}