{"title":"Alexander","description":null,"products":[{"product_id":"alexander-sky-fi","title":"Alexander Sky Fi - Standard","description":"\u003cp\u003eBuilding a great delay pedal was foremost in the minds of Alexander when they designed the \u003cstrong\u003eAlexander Sky Fi\u003c\/strong\u003e.  Development began with a crystal-clear digital delay engine combined with a tone filter to allow tailoring of the response to your liking.  They then added a reverb engine that draws inspiration from certain digital rack units of the 80s and 90s. These units were designed to be as affordable as possible, and had some unique hardware quirks that caused their reverb effects to build in intensity over time.  This \"slow-building\" artifact is one of the things that made these units so special. Alexander have done their best to capture some of the magic of these units with the Sky Fi, while also incorporating some tricks of their own like the ability to freeze or oscillate by holding the bypass switch.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eReverb — Adjusts the mix and decay of the reverb engine.   Turn this knob while holding the bypass footswitch to change the delay signal mix.  The Sky Fi remembers your delay mix setting when powered off.\u003c\/li\u003e \u003cli\u003eDelay — Controls the delay time for the delay engine.\u003c\/li\u003e \u003cli\u003eMix — Controls the blend between fully dry (clean) and fully wet (reverb + delay only) sound. 12 o’clock is an equal mix of clean and reverb + delay.\u003c\/li\u003e \u003cli\u003eRepeat — Controls the feedback and repeats of the delay engine.  Rotate counter-clockwise for dark, filtered repeats.  Rotate clockwise for bright repeats.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eWash — Combines an 800ms delay with our slow-building reverb engine.  Holding the footswitch initiates reverb sustain.\u003c\/li\u003e \u003cli\u003eGleam — Adds an upper octave partial to the reverb effect, holding the footswitch swells in a pronounced shimmer.  Maximum delay time in this mode is approximately 640ms.\u003c\/li\u003e \u003cli\u003eEcho — Slow-build reverb plus delay, holding the footswitch reduces the reverb slightly and forces the delay into oscillation.  Warning - extremely loud oscillation and \/ or total collapse of your signal may occur!\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eHOLD Function:\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi has a unique feature - the bypass footswitch integrates with the reverb and delay engines.  Hold the footswitch to shift the reverb or delay engine into a feedback mode.  In Wash and Gleam modes, the Hold function increases the Reverb time and mix to an infinite setting.  In Echo mode, the Hold function increases the Delay feedback to maximum levels.\u003c\/p\u003e  \u003cp\u003eA jack has been added to the left side of the Sky Fi to allow for remote triggering of the Hold function.  Connect any normally-open \"tap tempo\" style footswitch to this jack to trigger the hold function from anywhere on your pedalboard.\u003c\/p\u003e  \u003cp\u003eThe Hold function has two options:  Infinite allows new notes to be added to the held signal.  Freeze routes the dry signal around the held notes so that you can play over the frozen notes without changing their harmonic content. To switch between the two modes, hold the bypass switch while powering on.  The LED will blink once for Freeze or five times for Infinite.  The pedal remembers the last setting.\u003c\/p\u003e  \u003ch3\u003eBypass Switching\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi features a buffered bypass with \"trails,\" so that the reverb and delay will continue to repeat when the pedal is bypassed.  The Sky Fi features an analog dry signal path.  If the Sky Fi is set to Infinite mode, you can engage the pedal and the Hold function by holding the footswitch even while in bypass.  Release the footswitch to return to bypass mode.\u003c\/p\u003e  \u003ch3\u003eWet\/Dry Output\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi allows the player to separate the wet and dry signals at the output jack.  Insert a standard mono patch cable into the jack to use as a traditional guitar pedal - the output will contain both wet and dry signals as determined by the Mix knob.  If a stereo \/ TRS cable is connected, the Sky Fi will place a buffered dry signal on the \"ring\" of the jack and a mix of wet and dry on the \"tip.\"  Set the Mix control fully clockwise to have complete wet \/ dry separation.  The Sky Fi will send the dry signal to both outputs when bypassed.\u003c\/p\u003e  \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi requires a 9 V DC power supply with a 2.1 mm pin, center negative.  The Sky Fi is not designed to be powered on supplies higher than 9V and does not use a battery.  The Sky Fi should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.  The Sky Fi requires approx. 60 mA.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195013735,"sku":"95103","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-sky-fi-standard_95103_1_fe151ed7-9a78-444d-a600-b66286e191b8.jpg?v=1787092075"},{"product_id":"alexander-radical-delay-ii-tap","title":"Alexander Radical Tap II","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Tap II\u003c\/strong\u003e is tap tempo switch for Radical Delay II+. The normally-open momentary footswitch works with all Alexander Pedals that support remote control.\u003c\/p\u003e\r\n\r\n\u003cp\u003eControls the following units:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eRadical Delay II+:  Tap Tempo\u003c\/li\u003e\r\n\u003cli\u003eHistory Lesson:  Tap Tempo (hold to select subdivision)\u003c\/li\u003e\r\n\u003cli\u003eHistory Lesson Vol. II:  Tap Tempo (hold to select subdivision)\u003c\/li\u003e\r\n\u003cli\u003eEquilibrium DLX:  Tap Tempo (hold to select fast \/ slow range)\u003c\/li\u003e\r\n\u003cli\u003eChesapeake:  Tap Tempo (hold to select subdivision)\u003c\/li\u003e\r\n\u003cli\u003eSuper Radical Delay:  Tap Tempo\u003c\/li\u003e\r\n\u003cli\u003eOblivion:  Tap Tempo\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450194980967,"sku":"95102","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-tap-ii_95102_1_e7330ec6-aab1-49a8-acb9-83cee5c20fa6.jpg?v=1787092075"},{"product_id":"alexander-radical-delay-ii","title":"Alexander Radical Delay II+","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Radical Delay II+\u003c\/strong\u003e is the sound of a  classic 80s flavored delay in the Betamax and fast-forwarded to the good part - the sound you love with more reasons to love it, like updated cosmetics and built-in tap tempo.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eControls:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eTime (8 D. Q) — Changes the delay time from 0 - 920ms, in Tap mode, this knob sets the tap tempo subdivision, left for 8th notes, center for dotted 8ths or right for quarters\u003c\/li\u003e\r\n\u003cli\u003eRepeat — Controls the feedback of the delay, the Radical Delay II+ does not self-oscillate, because that does not compute\u003c\/li\u003e\r\n\u003cli\u003eTweak — Adjusts a different parameter in each mode\u003c\/li\u003e\r\n\u003cli\u003eMix — Controls the blend between fully dry (clean) to fully wet (repeat only)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eMode Toggle:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eMod — Super-clean digital delay with adjustable modulation. The Tweak knob adds a luscious modulation to the delay. At 12 o’clock there is no modulation. Clockwise adds a slow chorus and counter-clockwise adds a fast vibrato.\u003c\/li\u003e\r\n\u003cli\u003eGlitch — Pristine digital delay that you can mangle in unusual and interesting ways.  With the Tweak knob fully counter-clockwise, the Radical Delay will echo exactly what you play. Turn the Tweak knob clockwise to add some “ghost in the machine” style glitches and odd pitch modulation. And with the Tweak knob fully clockwise, the Radical Delay sounds more like a synthesizer or video game console.\u003c\/li\u003e\r\n\u003cli\u003eBend — Delay with pitch shifting that’s based on the earliest technology and spirals up or down with each repeat. Turn the Tweak knob counter clockwise to shift the pitch down or clockwise to shift up. Hint: Turn the delay time all the way down and the Radical Delay will take on a whole new vibe. In Mod mode, you’ll find analog-flavored chorus. Glitch mode turns into a “bleep bloop” robot machine. And in Bend mode, try blending the dry signal in for glitchy pitch-shifted harmony lines.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eTap Tempo\u003c\/h3\u003e\r\n\r\n\u003cp\u003eHold the bypass footswitch to enter tap tempo mode.  The bypass LED will flash at the current tempo, tap the footswitch two or more times to set a new tempo.  Hold the bypass footswitch again to exit tap tempo mode or wait 4 seconds and the pedal will exit on its own.  Turn the Time control while in tap tempo mode to change the delay subdivisions - each division is marked by a dot.  The available divisions are eighth-note (2x tap speed,) dotted-eighth (1.5x tap speed) and quarter-note (1x tap speed.)  The pedal will remember the last tap tempo setting used.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe green jack on the side of the pedal allows you to connect a tap tempo footswitch.  The Radical Delay II+ requires the use of a normally-open footswitch, and is compatible with automated tap tempo controllers such as the Disaster Area SMARTClock or Gen3 MultiJack interface.  Tapping the remote footswitch will cause the Radical Delay II+ to enter tap tempo mode.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIf you prefer to get crazy, you can assign the green jack to act as an expression pedal input.  Hold the footswitch down at power-on to select between tap tempo (two blinks) or expression (five blinks.)  Connect a standard expression pedal (tip 0-3.3V, ring 3.3V, sleeve GND) to the green jack and you're good to go.  To set the expression pedal range, move the expression pedal to the heel-down setting and turn the Time knob.  Then move the pedal to the toe-down setting and turn the Time knob again.  The Radical Delay II+ will sweep the delay time between these two settings as you move the expression pedal, and the LED will indicate the current expression pedal position.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eBypass Switching\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Radical Delay II+ features a buffered bypass with \"trails\".  The delay will continue to repeat when the pedal is bypassed.  The Radical Delay II+ features an analog dry signal path.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Radical Delay II+ requires a 9V DC \/ 70mA power supply with a 2.1mm pin, center negative.  The Radical Delay II+ is not designed to be powered on supplies higher than 9V and does not use a battery.  The Radical Delay II+ should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195046503,"sku":"95101","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-radical-delay-ii-plus_95101_1_01fecc69-d294-4a2c-843f-c3cdf4ad5205.jpg?v=1787092075"},{"product_id":"alexander-la-calavera","title":"Alexander La Calavera - Corazon","description":"\u003cp\u003eA full-fledged festival of phasing, the \u003cstrong\u003eAlexander La Calavera\u003c\/strong\u003e combines an offering to the more traditional effects of days gone by with the essence of rebirth and revolution.  Wake the dead with a colorful celebration of vibrant vibes and multiple modes of modulation.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the phase shifter.  In Envelope mode, the rate control sets the maximum speed.\u003c\/li\u003e \u003cli\u003eIntensity:  Controls the maximum LFO sweep and the intensity of the phase shifter.\u003c\/li\u003e \u003cli\u003eMix:  Controls the blend between the dry and phased signal.  Equal mix is at 12 o'clock.  Hint:  Vibrato effects are available with 100% wet mix.\u003c\/li\u003e \u003cli\u003eTweak:  This controls different parameters depending on the mode the pedal is in.  See below for details.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSuave:  Smooth sounding ten-stage studio phaser, the Suave mode is wet and deep.  The Tweak knob controls the amount of regeneration in the phase signal.  This mode has a unique twist - when the Depth control gets high enough the oscillator waveform \"folds back\" into itself for a super-deep sweep.\u003c\/li\u003e \u003cli\u003eDynámica:  This mode puts the control in your hands, literally.  The Tweak knob controls the sensitivity of the phaser to your guitar input volume, and the Rate knob sets the maximum phaser speed.  Set the Rate below noon to increase speed with higher volumes, set above noon to decrease speed with louder signals. Hint:  Try Envelope mode mixed fully wet, with low Intensity for a volume sensing vibrato.\u003c\/li\u003e \u003cli\u003eLoco:  This one is pretty crazy.  The Tweak knob controls the feedback of the phase signal, and is linked to a ring modulator for some intense modulation effects.  Might sound pretty gnarly, might sound pretty sweet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eLa Calavera requires a 9V DC power supply with a 2.1mm pin, center negative.  La Calavera is not designed to be powered on supplies higher than 9V and does not use a battery.  La Calavera should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195112039,"sku":"95106","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-calavera-corazon_95106_1_16bac31b-2138-453c-8797-61798cd06dfe.jpg?v=1787092075"},{"product_id":"alexander-syntax-error","title":"Alexander Syntax Error","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Syntax Error\u003c\/strong\u003e takes your tones back to the dialup era when video games were measured by their bits and telephones were wired to your wall.  Inside, the primitive sounds of microchips await.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIt's time to blow the dust out of your cartridges and plug in your controllers. Set your modem for 14,400 baud and let the games begin.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eNeo Series\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sonic scientists at Alexander Pedals have been working overtime to cram the most pedal into the smallest box, and now present the Neo Series!  Each Neo Series pedal incorporates an advanced 32-bit microcontroller adding presets, expression, and MIDI capability.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Neo Series pedals are small but mighty!  Imagine having a single pedal on your board that can access up to 4 separate preset tones with a touch of your toe.  Connect an expression pedal to \"morph\" between two distinct settings for each preset for dynamic real-time effects.  Or hook up a simple footswitch to trigger a timed \"ramp\" between those expression settings.  Expressive performance technology, right at your feet.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePresets\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAll Neo Series pedals feature a simple yet powerful preset functionality.  Hold the bypass footswitch to move the pedal to the next available preset, and the pedal will reconfigure itself on the fly.  All knob values and the effect mode settings are recalled, allowing you to set up to four unique tones.  Want more presets?  Simply connect a MIDI controller to the EXP port on the side of the Neo Series pedal and access up to 16 presets total.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo load a preset, hold the bypass footswitch down or send a MIDI program change from 0-15.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo save a preset, hold the Select button down and then hold the bypass footswitch.  The pedal will save the current settings to the current preset.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAny changes you make to the pedal settings will be lost when switching to a new preset unless you save the current preset first, so be careful!\u003c\/p\u003e\r\n\r\n\u003ch3\u003eExpression and MIDI\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe EXP port on the left side of the Syntax Error can function as an expression pedal, foot switch input, or a MIDI input.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eExpression Pedal:  Set the expression pedal to the heel down position, then adjust the knobs to your preferred setting.  Sweep the pedal to the toe position and set the knobs to a different setting.  Now the Syntax Error will allow you to seamlessly morph between the two settings!\u003c\/li\u003e\r\n\u003cli\u003eFoot Switch:  Connect a momentary foot switch to the port with a standard patch cable.  Set the knobs like you want, then tap the foot switch and set them again.  Every time you tap the knob the Syntax Error will sweep between your two knob settings at the speed you set in the configuration mode.\u003c\/li\u003e\r\n\u003cli\u003eMIDI:  The Neo Series pedals can connect to a compatible MIDI controller to control all of the pedal functions plus access 12 extra presets, for a total of 16.  The USB port may also be used as a MIDI interface to your computer or mobile device.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eControls:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eSample (Bonus):  Adjusts the sampling rate of the audio computer system. Sampling rate is minimum \/ most degradation with this knob clockwise.  Hold the select button and turn this knob to set the Bonus parameter, which controls a different function in each mode.\u003c\/li\u003e\r\n\u003cli\u003eCode:  Controls a different parameter in each mode.  In Stretch mode, this knob controls the sample clock direction and speed.  In Cube mode, this controls the gain of the distortion.  And in Ring mode, it adjusts the speed of the modulation sample-and-hold.\u003c\/li\u003e\r\n\u003cli\u003eMix (Volume):  Controls the amount of effected signal.  Turn fully clockwise to \"kill\" the dry signal.  Hold the select button and turn this knob to set the Volume of both wet and dry signals.\u003c\/li\u003e\r\n\u003cli\u003eTweak:  Controls a different parameter in each mode.  In Stretch mode, this knob controls the length of the sample buffer.  In Cube mode, this controls the cutoff frequency of the low-pass filter.  In Ring mode, this sets the depth of the sample and hold filter modulation.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eSelect Button - tap to choose a new effect mode:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eStretch:  This one will really mess with your drummer's head. The incoming audio is sampled and stick it in a buffer, then play it back.  Pretty standard, right?  Wrong.  Turn the Tweak knob to set the length of the buffer, then set the Code knob to adjust the sample playback clock.  The clock speed adjusts from +1 (normal speed) to -1 (reverse playback!) Use the Bonus control to change the feedback into the delay line for trippy echo tones. Hint:  Set the Code knob near noon to completely break everything.\u003c\/li\u003e\r\n\u003cli\u003eCube:  This is probably the most normal sounding thing in here.  The Code knob controls the gain and mix on a cubic distortion algorithm.  Here's how it is done:  (abs(INPUT^3))^3.  It sounds great, if you like math.  Every distortion circuit (or program!) needs a tone control so Alexander added a resonant low-pass filter.  The tone filter is bypassable, just turn the knob fully counter-clockwise.  The Bonus parameter controls the resonance of the filter.\u003c\/li\u003e\r\n\u003cli\u003eRing:  This mode combines a ring modulator with a sample and hold LFO.  Code controls the speed of the sample and hold, while Tweak controls its depth.  Set Code to minimum to disable the LFO for a \"normal\" ring modulator (is that a thing?)  The Bonus parameter controls the EQ of the modulated signal.\u003c\/li\u003e\r\n\u003cli\u003eFreq:  Shifts the frequencies of the input signal by a fixed amount. This one will change the pitch of incoming audio but unlike a traditional pitch shifter it doesn't maintain the intervals between the notes you play into it.  The Code knob adjusts the amount of frequency shift and the Tweak knob controls the amount of signal that gets fed back into the shifter.  Want more options?  Use the Bonus knob to change the time delay of the feedback, for comb filtering and flanging textures.  This mode ranges from beautiful bubbles to gargling nightmares, and don't forget you can add in the crush effects from the Sample knob to grunge things up!\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eBypass Switching:\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Syntax Error features a buffered bypass using a soft-touch footswitch.  The dry signal path is digital, because computers, but the bypassed signal is analog.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eConfiguration\u003c\/h3\u003e\r\n\r\n\u003cp\u003eTo configure, power on while holding the center Select button and release when the program LEDs start to flash. Tap the Select button to choose Expression (upper LED green), Foot Switch (upper LED orange) or MIDI (upper LED red). Turn the Mix knob to select the Foot Switch Ramp speed - Lower LED green slow, lower LED orange medium, lower LED red fast. Turn the Tweak knob to set the main LED brightness.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIf you wish to assign the Syntax Error's MIDI channel, simply send a program change message from your controller on the correct channel while the pedal is in configuration mode.  Hold the Select button to save the pedal settings.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Syntax Error MIDI port requires the use of either a MIDI converter box such as the Disaster Area \/ Chase Bliss MIDIBox or a MIDI controller that supports 1\/4\" devices such as the Disaster Area Gen3 series.  The Syntax Error defaults to using MIDI Channel 1.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Syntax Error requires a 9V DC power supply with a 2.1mm pin, center negative, 8 0mA.  The Syntax Error is not designed to be powered on supplies higher than 9V and does not use a battery.  The Syntax Error should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195079271,"sku":"95100","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-syntax-error_95100_1_5d9fef62-644d-4a6b-89f2-8f7b877ccc35.jpg?v=1787092075"},{"product_id":"alexander-jubilee-silver-overdrive","title":"Alexander Jubilee Silver Overdrive","description":"\u003cp\u003eRoaring like a British Lion from Wembley to the Sunset Strip, the \u003cstrong\u003eAlexander Jubilee Silver Overdrive\u003c\/strong\u003e is ready to melt faces.  Sure, it can do subtle but that's no fun.  Crank it up and rock out.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eControls:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eLoudness:  Controls the output level of the pedal\u003c\/li\u003e\r\n\u003cli\u003eDrive:  Adjusts the gain and distortion of the pedal\u003c\/li\u003e\r\n\u003cli\u003eTreble\/Middle\/Bass:  Passive three-band tone stack, voiced like a British amplifier\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Jubilee requires a DC power supply with a 2.1mm pin, center negative.  The Jubilee will operate on power supply voltages up to 18 V and does not use a battery.  The Jubilee should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195144807,"sku":"95105","price":151.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-jubilee_95105_1_cf22091c-489c-4f35-9dde-95b12cdfa4b5.jpg?v=1787092075"},{"product_id":"alexander-history-lesson-vol-ii","title":"Alexander History Lesson Vol II","description":"\u003cp\u003eGo back to school with your guide to three decades of delay.  The \u003cstrong\u003eAlexander History Lesson Vol II\u003c\/strong\u003e is majoring in Echo with a minor in Modulation.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe History Lesson Vol II is a loving homage to the best echoes the past has to offer. Alexander updated the pedal with stereo outputs, an improved mixer section, and a tone control for maximum versatility while remaining easy to use.  So plug in, turn some knobs, and journey through the past.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAlexander have made some big changes in the History Lesson Vol 2.  Based on customer suggestions, they have added a tone control to the echo, allowing you to tailor its response to fit perfectly in your mix.  The rubber band artifacts while tapping or adjusting the delay time have been remover.  They have also also added a second output that carries the analog dry signal.  Finally, the mixer section has been improved to allow you to have fully-wet mix and trails if you want them.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eControls:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eTIME (Tone) - adjust the delay time from 10ms to 950ms.  Turning this knob cancels the Tap Tempo setting.  Holding down the Bypass \/ Tone footswitch lets you adjust the tone of the echo effect.  The Tone setting is stored in the memory of the pedal for future use, and it responds differently for each of the modes in the pedal.\u003c\/li\u003e\r\n\u003cli\u003eREPEAT - controls the feedback of the delay.  The 1977 mode will go into infinite \/ runaway feedback.\u003c\/li\u003e\r\n\u003cli\u003eMOD - Adds a luscious modulation to the delay. At 12 o’clock there is no modulation. Clockwise adds a slow chorus and counter-clockwise adds a fast vibrato.\u003c\/li\u003e\r\n\u003cli\u003eMIX - Controls the blend between fully dry (clean) and fully wet (repeat only) echo sound. 12 o’clock is an equal mix of clean and echo. Hint: The Mod knob works even when the delay time turned all the way down, allowing the History Lesson to function as an chorus or vibrato pedal.  The chorus takes on the \"flavor\" of the delay machine, so you can get tape \/ analog \/ digital chorus or vibrato.\u003c\/li\u003e\r\n\u003cli\u003eTap Tempo \/ Division - tap twice to set the delay time.  The LED above the Tap switch flashes to indicate the current tempo and division.  Hold this footswitch to toggle between quarter-note (green,) eighth-note (red,) or dotted-eighth (orange) subdivisions.  The subdivision setting is stored in the memory of the pedal for future use.\u003c\/li\u003e\r\n\u003cli\u003eRemote Tap Tempo Jack - connect a standard normally-open momentary switch to this jack to allow for remote tap tempo and subdivision selection.  The History Lesson Vol. 2 may also interface with a pedalboard clock source such as a Disaster Area SMARTClock or DMC Gen3.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eMode Toggle:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e1963 - Magnetic tape echo, warm and rich.  The 1963 mode captures the frequency response of the tape heads and preamp of a vintage tape delay.  The Mod knob controls the \"wow\" or \"flutter\" of the tape.  Each delay repeat loses both treble and bass, for a warm and compressed sound.  The Tone knob controls the age of the tape, making the echo brighter or darker.\u003c\/li\u003e\r\n\u003cli\u003e1977 - Analog delay, murky and wet.  The 1977 mode is based on a classic solid-state analog echo.  This mode is capable of infinite repeats for the classic analog delay \"spaceship\" tone.  The Mod knob adds analog chorus or vibrato.  The Tone knob controls the analog delay filter.\u003c\/li\u003e\r\n\u003cli\u003e1984 - Digital delay, bright and present.  The 1984 mode captures the sheen and clarity of the early digital delays.  Each repeat sounds just like what you put in, with the classic digital \"clang\" you will either love or hate.  The Mod knob adds wide-ranging pitch modulation, be careful!  The Tone control sweeps the delay between low-pass and high-pass filtering for a wide range of delay tones.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eBypass Switching\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe History Lesson Vol. 2 features a buffered bypass with optional \"trails.\"  In Trails mode the delay will continue to repeat when the pedal is bypassed.  To switch between standard bypass and trails, hold the bypass switch while powering on.  The LED will blink once for standard bypass or five times for trails.  The pedal remembers the last setting.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe History Lesson Vol. 2 requires a 9V DC power supply with a 2.1mm pin, center negative.  The History Lesson Vol. 2 is not designed to be powered on supplies higher than 9V and does not use a battery.  The History Lesson Vol. 2 should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.  The History Lesson Vol. 2 requires approx. 60mA.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195177575,"sku":"95104","price":239.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-history-lesson-vol-2_95104_1_745de725-523b-43ea-9d4e-8d865f436ca5.jpg?v=1787092075"},{"product_id":"alexander-golden-summer","title":"Alexander Golden Summer","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Golden Summer\u003c\/strong\u003e is the sound of a never-ending summer.  Those nights when it was light out until 10 and your mom called you home from the back door.  Skinned knees, fireflies in a jar and the smell of magnolia trees.  Just let the nostalgia wash over you.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eControls:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eReverb — Adjusts the size of the virtual reverb chamber\u003c\/li\u003e\r\n\u003cli\u003eDelay — Controls the pre-delay of the reverb and the delay time in Echo mode\u003c\/li\u003e\r\n\u003cli\u003eMix — Controls the blend between fully dry (clean) and fully wet (reverb only) echo sound, 12 o’clock is an equal mix of clean and reverb\u003c\/li\u003e\r\n\u003cli\u003eTweak — Tweaks a different parameter in each mode\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eMode Toggle:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eMod — Large chamber reverb with adjustable modulation. Turn the Tweak knob clockwise for slow chorus, counter-clockwise for fast vibrato.\u003c\/li\u003e\r\n\u003cli\u003eShimmer — A classic ambient effect that adds an octave to the reverb trails. Turn the Tweak control clockwise to add an octave up, or counter-clockwise to add an octave down.\u003c\/li\u003e\r\n\u003cli\u003eEcho — A dedicated echo unit where the reverb is fed by the delay repeats for interesting rhythmic effects or longer echo washes. The Delay knob controls 400ms of delay time.  Tweak knob adjusts the repeats and the delay tone - counter-clockwise for analog flavored dark repeats, clockwise for bright digital repeats.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eBypass Switching\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Golden Summer features a buffered bypass with optional \"trails.\"  In Trails mode the reverb and delay will continue to repeat when the pedal is bypassed.  To switch between standard bypass and trails, hold the bypass switch while powering on.  The LED will blink once for standard bypass or five times for trails.  The pedal remembers the last setting.  The Golden Summer features an analog dry signal path.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe Golden Summer requires a 9V DC power supply with a 2.1mm pin, center negative.  The Golden Summer is not designed to be powered on supplies higher than 9V and does not use a battery.  The Golden Summer should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.  The Golden Summer requires approx. 60mA.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195210343,"sku":"95107","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-golden-summer_95107_1_74ed4da9-ff05-40cc-9ba1-b5d59a1c4dd2.jpg?v=1787092076"},{"product_id":"alexander-f-13-neo-flanger","title":"Alexander F-13 Neo Flanger","description":"\u003cp\u003eAlien mojo meets military tech, circa 1958.  The \u003cstrong\u003eAlexander F-13 Neo Flanger\u003c\/strong\u003e is their take on space junk stolen from Area 51 and put into the service of rock 'n' roll.  Equal parts science, art, weapon and instrument, the F-13 Neo generates interplanetary flange never heard in this galaxy or any other.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAlexander have decided to give the fantastic F-13 Flanger the full Neo treatment, and that means new features!  The F-13 Neo adds additional controls in all modes, more patterns in Step mode, and the all-new Echo Flanger effect.  Top it off with presets, expression, ramp morph and you've got a mean green flanging machine.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eNeo Series\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sonic scientists at Alexander Pedals have been working overtime to cram the most pedal into the smallest box, and now present the Neo Series!  Each Neo Series pedal incorporates an advanced 32-bit microcontroller adding presets, expression, and MIDI capability.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Neo Series pedals are small but mighty!  Imagine having a single pedal on your board that can access up to 4 separate preset tones with a touch of your toe.  Connect an expression pedal to \"morph\" between two distinct settings for each preset for dynamic real-time effects.  Or hook up a simple footswitch to trigger a timed \"ramp\" between those expression settings.  Expressive performance technology, right at your feet.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePresets\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAll Neo Series pedals feature a simple yet powerful preset functionality.  Hold the bypass footswitch to move the pedal to the next available preset, and the pedal will reconfigure itself on the fly.  All knob values and the effect mode settings are recalled, allowing you to set up to four unique tones.  Want more presets?  Simply connect a MIDI controller to the EXP port on the side of the Neo Series pedal and access up to 16 presets total.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo load a preset, hold the bypass footswitch down or send a MIDI program change from 0-15.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo save a preset, hold the Select button down and then hold the bypass footswitch.  The pedal will save the current settings to the current preset.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAny changes you make to the pedal settings will be lost when switching to a new preset unless you save the current preset first, so be careful!\u003c\/p\u003e\r\n\r\n\u003ch3\u003eExpression and MIDI\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe EXP port on the left side of the pedal can function as an expression pedal, foot switch input, or a MIDI input.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eExpression Pedal:  Set the expression pedal to the heel down position, then adjust the knobs to your preferred setting.  Sweep the pedal to the toe position and set the knobs to a different setting.  Now the F-13 Neo will allow you to seamlessly morph between the two settings!\u003c\/li\u003e\r\n\u003cli\u003eFoot Switch:  Connect a momentary foot switch to the port with a standard patch cable.  Set the knobs like you want, then tap the foot switch and set them again.  Every time you tap the knob the F-13 Neo will sweep between your two knob settings at the speed you set in the configuration mode.\u003c\/li\u003e\r\n\u003cli\u003eMIDI:  The Neo Series pedals can connect to a compatible MIDI controller to control all of the pedal functions plus access 12 extra presets, for a total of 16.  The USB port may also be used as a MIDI interface to your computer or mobile device.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eControls:\u003c\/h3\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eControls in parentheses () are accessed by holding down the Select button and turning the indicated knob.\u003c\/em\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the flanger, from glacial to space invaders.  Controls the input sensitivity in Dyna mode.\u003c\/li\u003e\r\n\u003cli\u003e(ALT1):  Controls the sweep offset (manual) in Auto mode, the pattern select in Step mode, the envelope speed in Dyna mode, or the delay time in Echo mode.\u003c\/li\u003e\r\n\u003cli\u003eDepth:  Controls the maximum LFO sweep in Auto, Step, and Echo modes. In Dynamic mode, this controls whether the flanger sweeps down (less than noon) or up (greater than noon) based on the input signal.\u003c\/li\u003e\r\n\u003cli\u003e(ALT2): Controls the delay repeats in Echo mode\u003c\/li\u003e\r\n\u003cli\u003eMix:  Controls the blend between the dry and flanged signal.  Equal mix is at 12 o'clock.\u003c\/li\u003e\r\n\u003cli\u003e(Level):  Controls the overall output level of the pedal, from -20 dB to +10 dB.  Unity gain is near 1 o'clock.\u003c\/li\u003e\r\n\u003cli\u003eRegen:  Adjusts the amount of flanged signal fed back into the modulation.  Zero feedback is at noon, clockwise increases the positive feedback for a standard flanger sound.  Twist this knob counter-clockwise for negative feedback and a unique \"inside out\" flange.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eBypass Switching\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe F-13 Neo features a buffered bypass using a soft-touch footswitch.  The dry signal path is digital, to maintain the precise time and phase alignment necessary for ultimate flanging.  The bypass signal is 100% analog.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eConfiguration\u003c\/h3\u003e\r\n\r\n\u003cp\u003eTo configure, power on while holding the center Select button and release when the program LEDs start to flash.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTap the Select button to choose Expression (upper LED green,) Foot Switch (upper LED orange,) or MIDI (upper LED red.)\u003c\/p\u003e\r\n\r\n\u003cp\u003eTurn the Mix knob to select the Foot Switch Ramp speed - Lower LED green slow, lower LED orange medium, lower LED red fast.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTurn the Tweak knob to set the main LED brightness.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIf you wish to assign the F-13 Neo's MIDI channel, simply send a program change message from your controller on the correct channel while the pedal is in configuration mode.  Hold the Select button to save the pedal settings.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe F-13 Neo MIDI port requires the use of either a MIDI converter box such as the Disaster Area \/ Chase Bliss MIDIBox or a MIDI controller that supports 1\/4\" devices such as the Disaster Area Gen3 series.  The F-13 Neo defaults to using MIDI Channel 1.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe F-13 Neo requires a 9V DC power supply with a 2.1mm pin, center negative, 80mA.  The F-13 Neo is not designed to be powered on supplies higher than 9V and does not use a battery.  The F-13 Neo should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195243111,"sku":"95099","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-f-13-neo_95099_1_dd5d7f0f-6fed-4859-9438-e9af4ae1ebde.jpg?v=1787092076"},{"product_id":"alexander-syntax-error-red-blue-shift","title":"Alexander Syntax Error - Red Blue Shift","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Syntax Error\u003c\/strong\u003e takes your tones back to the dialup era when video games were measured by their bits and telephones were wired to your wall.  Inside, the primitive sounds of microchips await.\u003c\/p\u003e  \u003cp\u003eIt's time to blow the dust out of your cartridges and plug in your controllers. Set your modem for 14,400 baud and let the games begin.\u003c\/p\u003e  \u003ch3\u003eNeo Series\u003c\/h3\u003e  \u003cp\u003eThe sonic scientists at Alexander Pedals have been working overtime to cram the most pedal into the smallest box, and now present the Neo Series!  Each Neo Series pedal incorporates an advanced 32-bit microcontroller adding presets, expression, and MIDI capability.\u003c\/p\u003e  \u003cp\u003eThe Neo Series pedals are small but mighty!  Imagine having a single pedal on your board that can access up to 4 separate preset tones with a touch of your toe.  Connect an expression pedal to \"morph\" between two distinct settings for each preset for dynamic real-time effects.  Or hook up a simple footswitch to trigger a timed \"ramp\" between those expression settings.  Expressive performance technology, right at your feet.\u003c\/p\u003e  \u003ch3\u003ePresets\u003c\/h3\u003e  \u003cp\u003eAll Neo Series pedals feature a simple yet powerful preset functionality.  Hold the bypass footswitch to move the pedal to the next available preset, and the pedal will reconfigure itself on the fly.  All knob values and the effect mode settings are recalled, allowing you to set up to four unique tones.  Want more presets?  Simply connect a MIDI controller to the EXP port on the side of the Neo Series pedal and access up to 16 presets total.\u003c\/p\u003e  \u003cp\u003eTo load a preset, hold the bypass footswitch down or send a MIDI program change from 0-15.\u003c\/p\u003e  \u003cp\u003eTo save a preset, hold the Select button down and then hold the bypass footswitch.  The pedal will save the current settings to the current preset.\u003c\/p\u003e  \u003cp\u003eAny changes you make to the pedal settings will be lost when switching to a new preset unless you save the current preset first, so be careful!\u003c\/p\u003e  \u003ch3\u003eExpression and MIDI\u003c\/h3\u003e  \u003cp\u003eThe EXP port on the left side of the Syntax Error can function as an expression pedal, foot switch input, or a MIDI input.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eExpression Pedal:  Set the expression pedal to the heel down position, then adjust the knobs to your preferred setting.  Sweep the pedal to the toe position and set the knobs to a different setting.  Now the Syntax Error will allow you to seamlessly morph between the two settings!\u003c\/li\u003e \u003cli\u003eFoot Switch:  Connect a momentary foot switch to the port with a standard patch cable.  Set the knobs like you want, then tap the foot switch and set them again.  Every time you tap the knob the Syntax Error will sweep between your two knob settings at the speed you set in the configuration mode.\u003c\/li\u003e \u003cli\u003eMIDI:  The Neo Series pedals can connect to a compatible MIDI controller to control all of the pedal functions plus access 12 extra presets, for a total of 16.  The USB port may also be used as a MIDI interface to your computer or mobile device.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSample (Bonus):  Adjusts the sampling rate of the audio computer system. Sampling rate is minimum \/ most degradation with this knob clockwise.  Hold the select button and turn this knob to set the Bonus parameter, which controls a different function in each mode.\u003c\/li\u003e \u003cli\u003eCode:  Controls a different parameter in each mode.  In Stretch mode, this knob controls the sample clock direction and speed.  In Cube mode, this controls the gain of the distortion.  And in Ring mode, it adjusts the speed of the modulation sample-and-hold.\u003c\/li\u003e \u003cli\u003eMix (Volume):  Controls the amount of effected signal.  Turn fully clockwise to \"kill\" the dry signal.  Hold the select button and turn this knob to set the Volume of both wet and dry signals.\u003c\/li\u003e \u003cli\u003eTweak:  Controls a different parameter in each mode.  In Stretch mode, this knob controls the length of the sample buffer.  In Cube mode, this controls the cutoff frequency of the low-pass filter.  In Ring mode, this sets the depth of the sample and hold filter modulation.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eSelect Button - tap to choose a new effect mode:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eStretch:  This one will really mess with your drummer's head. The incoming audio is sampled and stick it in a buffer, then play it back.  Pretty standard, right?  Wrong.  Turn the Tweak knob to set the length of the buffer, then set the Code knob to adjust the sample playback clock.  The clock speed adjusts from +1 (normal speed) to -1 (reverse playback!) Use the Bonus control to change the feedback into the delay line for trippy echo tones. Hint:  Set the Code knob near noon to completely break everything.\u003c\/li\u003e \u003cli\u003eCube:  This is probably the most normal sounding thing in here.  The Code knob controls the gain and mix on a cubic distortion algorithm.  Here's how it is done:  (abs(INPUT^3))^3.  It sounds great, if you like math.  Every distortion circuit (or program!) needs a tone control so Alexander added a resonant low-pass filter.  The tone filter is bypassable, just turn the knob fully counter-clockwise.  The Bonus parameter controls the resonance of the filter.\u003c\/li\u003e \u003cli\u003eRing:  This mode combines a ring modulator with a sample and hold LFO.  Code controls the speed of the sample and hold, while Tweak controls its depth.  Set Code to minimum to disable the LFO for a \"normal\" ring modulator (is that a thing?)  The Bonus parameter controls the EQ of the modulated signal.\u003c\/li\u003e \u003cli\u003eFreq:  Shifts the frequencies of the input signal by a fixed amount. This one will change the pitch of incoming audio but unlike a traditional pitch shifter it doesn't maintain the intervals between the notes you play into it.  The Code knob adjusts the amount of frequency shift and the Tweak knob controls the amount of signal that gets fed back into the shifter.  Want more options?  Use the Bonus knob to change the time delay of the feedback, for comb filtering and flanging textures.  This mode ranges from beautiful bubbles to gargling nightmares, and don't forget you can add in the crush effects from the Sample knob to grunge things up!\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eBypass Switching:\u003c\/h3\u003e  \u003cp\u003eThe Syntax Error features a buffered bypass using a soft-touch footswitch.  The dry signal path is digital, because computers, but the bypassed signal is analog.\u003c\/p\u003e  \u003ch3\u003eConfiguration\u003c\/h3\u003e  \u003cp\u003eTo configure, power on while holding the center Select button and release when the program LEDs start to flash. Tap the Select button to choose Expression (upper LED green), Foot Switch (upper LED orange) or MIDI (upper LED red). Turn the Mix knob to select the Foot Switch Ramp speed - Lower LED green slow, lower LED orange medium, lower LED red fast. Turn the Tweak knob to set the main LED brightness.\u003c\/p\u003e  \u003cp\u003eIf you wish to assign the Syntax Error's MIDI channel, simply send a program change message from your controller on the correct channel while the pedal is in configuration mode.  Hold the Select button to save the pedal settings.\u003c\/p\u003e  \u003cp\u003eThe Syntax Error MIDI port requires the use of either a MIDI converter box such as the Disaster Area \/ Chase Bliss MIDIBox or a MIDI controller that supports 1\/4\" devices such as the Disaster Area Gen3 series.  The Syntax Error defaults to using MIDI Channel 1.\u003c\/p\u003e  \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eThe Syntax Error requires a 9V DC power supply with a 2.1mm pin, center negative, 8 0mA.  The Syntax Error is not designed to be powered on supplies higher than 9V and does not use a battery.  The Syntax Error should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195275879,"sku":"95304","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-syntax-error-red-blue-shift_95304_1_a5ac2220-e7c0-4453-9ac4-a12415f34fda.jpg?v=1787092076"},{"product_id":"alexander-sky-fi-red-anodized","title":"Alexander Sky Fi - Red Anodized","description":"\u003cp\u003eBuilding a great delay pedal was foremost in the minds of Alexander when they designed the \u003cstrong\u003eAlexander Sky Fi\u003c\/strong\u003e.  Development began with a crystal-clear digital delay engine combined with a tone filter to allow tailoring of the response to your liking.  They then added a reverb engine that draws inspiration from certain digital rack units of the 80s and 90s. These units were designed to be as affordable as possible, and had some unique hardware quirks that caused their reverb effects to build in intensity over time.  This \"slow-building\" artifact is one of the things that made these units so special. Alexander have done their best to capture some of the magic of these units with the Sky Fi, while also incorporating some tricks of their own like the ability to freeze or oscillate by holding the bypass switch.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eReverb — Adjusts the mix and decay of the reverb engine.   Turn this knob while holding the bypass footswitch to change the delay signal mix.  The Sky Fi remembers your delay mix setting when powered off.\u003c\/li\u003e \u003cli\u003eDelay — Controls the delay time for the delay engine.\u003c\/li\u003e \u003cli\u003eMix — Controls the blend between fully dry (clean) and fully wet (reverb + delay only) sound. 12 o’clock is an equal mix of clean and reverb + delay.\u003c\/li\u003e \u003cli\u003eRepeat — Controls the feedback and repeats of the delay engine.  Rotate counter-clockwise for dark, filtered repeats.  Rotate clockwise for bright repeats.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eWash — Combines an 800ms delay with our slow-building reverb engine.  Holding the footswitch initiates reverb sustain.\u003c\/li\u003e \u003cli\u003eGleam — Adds an upper octave partial to the reverb effect, holding the footswitch swells in a pronounced shimmer.  Maximum delay time in this mode is approximately 640ms.\u003c\/li\u003e \u003cli\u003eEcho — Slow-build reverb plus delay, holding the footswitch reduces the reverb slightly and forces the delay into oscillation.  Warning - extremely loud oscillation and \/ or total collapse of your signal may occur!\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eHOLD Function:\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi has a unique feature - the bypass footswitch integrates with the reverb and delay engines.  Hold the footswitch to shift the reverb or delay engine into a feedback mode.  In Wash and Gleam modes, the Hold function increases the Reverb time and mix to an infinite setting.  In Echo mode, the Hold function increases the Delay feedback to maximum levels.\u003c\/p\u003e  \u003cp\u003eA jack has been added to the left side of the Sky Fi to allow for remote triggering of the Hold function.  Connect any normally-open \"tap tempo\" style footswitch to this jack to trigger the hold function from anywhere on your pedalboard.\u003c\/p\u003e  \u003cp\u003eThe Hold function has two options:  Infinite allows new notes to be added to the held signal.  Freeze routes the dry signal around the held notes so that you can play over the frozen notes without changing their harmonic content. To switch between the two modes, hold the bypass switch while powering on.  The LED will blink once for Freeze or five times for Infinite.  The pedal remembers the last setting.\u003c\/p\u003e  \u003ch3\u003eBypass Switching\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi features a buffered bypass with \"trails,\" so that the reverb and delay will continue to repeat when the pedal is bypassed.  The Sky Fi features an analog dry signal path.  If the Sky Fi is set to Infinite mode, you can engage the pedal and the Hold function by holding the footswitch even while in bypass.  Release the footswitch to return to bypass mode.\u003c\/p\u003e  \u003ch3\u003eWet\/Dry Output\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi allows the player to separate the wet and dry signals at the output jack.  Insert a standard mono patch cable into the jack to use as a traditional guitar pedal - the output will contain both wet and dry signals as determined by the Mix knob.  If a stereo \/ TRS cable is connected, the Sky Fi will place a buffered dry signal on the \"ring\" of the jack and a mix of wet and dry on the \"tip.\"  Set the Mix control fully clockwise to have complete wet \/ dry separation.  The Sky Fi will send the dry signal to both outputs when bypassed.\u003c\/p\u003e  \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi requires a 9 V DC power supply with a 2.1 mm pin, center negative.  The Sky Fi is not designed to be powered on supplies higher than 9V and does not use a battery.  The Sky Fi should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.  The Sky Fi requires approx. 60 mA.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195308647,"sku":"95303","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-sky-fi-red_95303_1_46c37ee6-0916-4ea4-a05c-93c291728265.jpg?v=1787092076"},{"product_id":"alexander-sky-fi-pumpkin-spice","title":"Alexander Sky Fi - Pumpkin Spice","description":"\u003cp\u003eBuilding a great delay pedal was foremost in the minds of Alexander when they designed the \u003cstrong\u003eAlexander Sky Fi\u003c\/strong\u003e.  Development began with a crystal-clear digital delay engine combined with a tone filter to allow tailoring of the response to your liking.  They then added a reverb engine that draws inspiration from certain digital rack units of the 80s and 90s. These units were designed to be as affordable as possible, and had some unique hardware quirks that caused their reverb effects to build in intensity over time.  This \"slow-building\" artifact is one of the things that made these units so special. Alexander have done their best to capture some of the magic of these units with the Sky Fi, while also incorporating some tricks of their own like the ability to freeze or oscillate by holding the bypass switch.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eReverb — Adjusts the mix and decay of the reverb engine.   Turn this knob while holding the bypass footswitch to change the delay signal mix.  The Sky Fi remembers your delay mix setting when powered off.\u003c\/li\u003e \u003cli\u003eDelay — Controls the delay time for the delay engine.\u003c\/li\u003e \u003cli\u003eMix — Controls the blend between fully dry (clean) and fully wet (reverb + delay only) sound. 12 o’clock is an equal mix of clean and reverb + delay.\u003c\/li\u003e \u003cli\u003eRepeat — Controls the feedback and repeats of the delay engine.  Rotate counter-clockwise for dark, filtered repeats.  Rotate clockwise for bright repeats.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eWash — Combines an 800ms delay with our slow-building reverb engine.  Holding the footswitch initiates reverb sustain.\u003c\/li\u003e \u003cli\u003eGleam — Adds an upper octave partial to the reverb effect, holding the footswitch swells in a pronounced shimmer.  Maximum delay time in this mode is approximately 640ms.\u003c\/li\u003e \u003cli\u003eEcho — Slow-build reverb plus delay, holding the footswitch reduces the reverb slightly and forces the delay into oscillation.  Warning - extremely loud oscillation and \/ or total collapse of your signal may occur!\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eHOLD Function:\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi has a unique feature - the bypass footswitch integrates with the reverb and delay engines.  Hold the footswitch to shift the reverb or delay engine into a feedback mode.  In Wash and Gleam modes, the Hold function increases the Reverb time and mix to an infinite setting.  In Echo mode, the Hold function increases the Delay feedback to maximum levels.\u003c\/p\u003e  \u003cp\u003eA jack has been added to the left side of the Sky Fi to allow for remote triggering of the Hold function.  Connect any normally-open \"tap tempo\" style footswitch to this jack to trigger the hold function from anywhere on your pedalboard.\u003c\/p\u003e  \u003cp\u003eThe Hold function has two options:  Infinite allows new notes to be added to the held signal.  Freeze routes the dry signal around the held notes so that you can play over the frozen notes without changing their harmonic content. To switch between the two modes, hold the bypass switch while powering on.  The LED will blink once for Freeze or five times for Infinite.  The pedal remembers the last setting.\u003c\/p\u003e  \u003ch3\u003eBypass Switching\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi features a buffered bypass with \"trails,\" so that the reverb and delay will continue to repeat when the pedal is bypassed.  The Sky Fi features an analog dry signal path.  If the Sky Fi is set to Infinite mode, you can engage the pedal and the Hold function by holding the footswitch even while in bypass.  Release the footswitch to return to bypass mode.\u003c\/p\u003e  \u003ch3\u003eWet\/Dry Output\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi allows the player to separate the wet and dry signals at the output jack.  Insert a standard mono patch cable into the jack to use as a traditional guitar pedal - the output will contain both wet and dry signals as determined by the Mix knob.  If a stereo \/ TRS cable is connected, the Sky Fi will place a buffered dry signal on the \"ring\" of the jack and a mix of wet and dry on the \"tip.\"  Set the Mix control fully clockwise to have complete wet \/ dry separation.  The Sky Fi will send the dry signal to both outputs when bypassed.\u003c\/p\u003e  \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eThe Sky Fi requires a 9 V DC power supply with a 2.1 mm pin, center negative.  The Sky Fi is not designed to be powered on supplies higher than 9V and does not use a battery.  The Sky Fi should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply.  The Sky Fi requires approx. 60 mA.\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195341415,"sku":"95302","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-sky-fi-pumpkin_95302_1_fbb22076-33ce-47a2-be58-7c9f756ea69f.jpg?v=1787092076"},{"product_id":"alexander-la-calavera-rosa","title":"Alexander La Calavera - Rosa","description":"\u003cp\u003eA full-fledged festival of phasing, the \u003cstrong\u003eAlexander La Calavera\u003c\/strong\u003e combines an offering to the more traditional effects of days gone by with the essence of rebirth and revolution.  Wake the dead with a colorful celebration of vibrant vibes and multiple modes of modulation.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the phase shifter.  In Envelope mode, the rate control sets the maximum speed.\u003c\/li\u003e \u003cli\u003eIntensity:  Controls the maximum LFO sweep and the intensity of the phase shifter.\u003c\/li\u003e \u003cli\u003eMix:  Controls the blend between the dry and phased signal.  Equal mix is at 12 o'clock.  Hint:  Vibrato effects are available with 100% wet mix.\u003c\/li\u003e \u003cli\u003eTweak:  This controls different parameters depending on the mode the pedal is in.  See below for details.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSuave:  Smooth sounding ten-stage studio phaser, the Suave mode is wet and deep.  The Tweak knob controls the amount of regeneration in the phase signal.  This mode has a unique twist - when the Depth control gets high enough the oscillator waveform \"folds back\" into itself for a super-deep sweep.\u003c\/li\u003e \u003cli\u003eDynámica:  This mode puts the control in your hands, literally.  The Tweak knob controls the sensitivity of the phaser to your guitar input volume, and the Rate knob sets the maximum phaser speed.  Set the Rate below noon to increase speed with higher volumes, set above noon to decrease speed with louder signals. Hint:  Try Envelope mode mixed fully wet, with low Intensity for a volume sensing vibrato.\u003c\/li\u003e \u003cli\u003eLoco:  This one is pretty crazy.  The Tweak knob controls the feedback of the phase signal, and is linked to a ring modulator for some intense modulation effects.  Might sound pretty gnarly, might sound pretty sweet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eLa Calavera requires a 9V DC power supply with a 2.1mm pin, center negative.  La Calavera is not designed to be powered on supplies higher than 9V and does not use a battery.  La Calavera should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195374183,"sku":"95298","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-calavera-rosa_95298_1_1c2ab7b7-addd-443c-81d5-93eb6e78628e.jpg?v=1787092076"},{"product_id":"alexander-la-calavera-jamaica","title":"Alexander La Calavera - Jamaica","description":"\u003cp\u003eA full-fledged festival of phasing, the \u003cstrong\u003eAlexander La Calavera\u003c\/strong\u003e combines an offering to the more traditional effects of days gone by with the essence of rebirth and revolution.  Wake the dead with a colorful celebration of vibrant vibes and multiple modes of modulation.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the phase shifter.  In Envelope mode, the rate control sets the maximum speed.\u003c\/li\u003e \u003cli\u003eIntensity:  Controls the maximum LFO sweep and the intensity of the phase shifter.\u003c\/li\u003e \u003cli\u003eMix:  Controls the blend between the dry and phased signal.  Equal mix is at 12 o'clock.  Hint:  Vibrato effects are available with 100% wet mix.\u003c\/li\u003e \u003cli\u003eTweak:  This controls different parameters depending on the mode the pedal is in.  See below for details.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSuave:  Smooth sounding ten-stage studio phaser, the Suave mode is wet and deep.  The Tweak knob controls the amount of regeneration in the phase signal.  This mode has a unique twist - when the Depth control gets high enough the oscillator waveform \"folds back\" into itself for a super-deep sweep.\u003c\/li\u003e \u003cli\u003eDynámica:  This mode puts the control in your hands, literally.  The Tweak knob controls the sensitivity of the phaser to your guitar input volume, and the Rate knob sets the maximum phaser speed.  Set the Rate below noon to increase speed with higher volumes, set above noon to decrease speed with louder signals. Hint:  Try Envelope mode mixed fully wet, with low Intensity for a volume sensing vibrato.\u003c\/li\u003e \u003cli\u003eLoco:  This one is pretty crazy.  The Tweak knob controls the feedback of the phase signal, and is linked to a ring modulator for some intense modulation effects.  Might sound pretty gnarly, might sound pretty sweet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eLa Calavera requires a 9V DC power supply with a 2.1mm pin, center negative.  La Calavera is not designed to be powered on supplies higher than 9V and does not use a battery.  La Calavera should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195406951,"sku":"95299","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-calavera-jamaica_95299_1_378333ac-f286-4325-a839-615fd1272fd5.jpg?v=1787092076"},{"product_id":"alexander-la-calavera-glow-skull","title":"Alexander La Calavera - Glow Skull","description":"\u003cp\u003eA full-fledged festival of phasing, the \u003cstrong\u003eAlexander La Calavera\u003c\/strong\u003e combines an offering to the more traditional effects of days gone by with the essence of rebirth and revolution.  Wake the dead with a colorful celebration of vibrant vibes and multiple modes of modulation.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the phase shifter.  In Envelope mode, the rate control sets the maximum speed.\u003c\/li\u003e \u003cli\u003eIntensity:  Controls the maximum LFO sweep and the intensity of the phase shifter.\u003c\/li\u003e \u003cli\u003eMix:  Controls the blend between the dry and phased signal.  Equal mix is at 12 o'clock.  Hint:  Vibrato effects are available with 100% wet mix.\u003c\/li\u003e \u003cli\u003eTweak:  This controls different parameters depending on the mode the pedal is in.  See below for details.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSuave:  Smooth sounding ten-stage studio phaser, the Suave mode is wet and deep.  The Tweak knob controls the amount of regeneration in the phase signal.  This mode has a unique twist - when the Depth control gets high enough the oscillator waveform \"folds back\" into itself for a super-deep sweep.\u003c\/li\u003e \u003cli\u003eDynámica:  This mode puts the control in your hands, literally.  The Tweak knob controls the sensitivity of the phaser to your guitar input volume, and the Rate knob sets the maximum phaser speed.  Set the Rate below noon to increase speed with higher volumes, set above noon to decrease speed with louder signals. Hint:  Try Envelope mode mixed fully wet, with low Intensity for a volume sensing vibrato.\u003c\/li\u003e \u003cli\u003eLoco:  This one is pretty crazy.  The Tweak knob controls the feedback of the phase signal, and is linked to a ring modulator for some intense modulation effects.  Might sound pretty gnarly, might sound pretty sweet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eLa Calavera requires a 9V DC power supply with a 2.1mm pin, center negative.  La Calavera is not designed to be powered on supplies higher than 9V and does not use a battery.  La Calavera should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195439719,"sku":"95300","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-calavera-glow-skull_95300_1_38bfc814-552a-4196-80cd-42b0f5f0af23.jpg?v=1787092076"},{"product_id":"alexander-la-calavera-cruz","title":"Alexander La Calavera - Cruz","description":"\u003cp\u003eA full-fledged festival of phasing, the \u003cstrong\u003eAlexander La Calavera\u003c\/strong\u003e combines an offering to the more traditional effects of days gone by with the essence of rebirth and revolution.  Wake the dead with a colorful celebration of vibrant vibes and multiple modes of modulation.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the phase shifter.  In Envelope mode, the rate control sets the maximum speed.\u003c\/li\u003e \u003cli\u003eIntensity:  Controls the maximum LFO sweep and the intensity of the phase shifter.\u003c\/li\u003e \u003cli\u003eMix:  Controls the blend between the dry and phased signal.  Equal mix is at 12 o'clock.  Hint:  Vibrato effects are available with 100% wet mix.\u003c\/li\u003e \u003cli\u003eTweak:  This controls different parameters depending on the mode the pedal is in.  See below for details.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSuave:  Smooth sounding ten-stage studio phaser, the Suave mode is wet and deep.  The Tweak knob controls the amount of regeneration in the phase signal.  This mode has a unique twist - when the Depth control gets high enough the oscillator waveform \"folds back\" into itself for a super-deep sweep.\u003c\/li\u003e \u003cli\u003eDynámica:  This mode puts the control in your hands, literally.  The Tweak knob controls the sensitivity of the phaser to your guitar input volume, and the Rate knob sets the maximum phaser speed.  Set the Rate below noon to increase speed with higher volumes, set above noon to decrease speed with louder signals. Hint:  Try Envelope mode mixed fully wet, with low Intensity for a volume sensing vibrato.\u003c\/li\u003e \u003cli\u003eLoco:  This one is pretty crazy.  The Tweak knob controls the feedback of the phase signal, and is linked to a ring modulator for some intense modulation effects.  Might sound pretty gnarly, might sound pretty sweet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eLa Calavera requires a 9V DC power supply with a 2.1mm pin, center negative.  La Calavera is not designed to be powered on supplies higher than 9V and does not use a battery.  La Calavera should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195472487,"sku":"95297","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-calavera-cruz_95297_1_661ad672-da2f-4f21-beb4-975379a49960.jpg?v=1787092077"},{"product_id":"alexander-la-calavera-black-blue","title":"Alexander La Calavera - Black and Blue","description":"\u003cp\u003eA full-fledged festival of phasing, the \u003cstrong\u003eAlexander La Calavera\u003c\/strong\u003e combines an offering to the more traditional effects of days gone by with the essence of rebirth and revolution.  Wake the dead with a colorful celebration of vibrant vibes and multiple modes of modulation.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate:  Controls the rate of the low-frequency oscillator (LFO) for the phase shifter.  In Envelope mode, the rate control sets the maximum speed.\u003c\/li\u003e \u003cli\u003eIntensity:  Controls the maximum LFO sweep and the intensity of the phase shifter.\u003c\/li\u003e \u003cli\u003eMix:  Controls the blend between the dry and phased signal.  Equal mix is at 12 o'clock.  Hint:  Vibrato effects are available with 100% wet mix.\u003c\/li\u003e \u003cli\u003eTweak:  This controls different parameters depending on the mode the pedal is in.  See below for details.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMode Toggle:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSuave:  Smooth sounding ten-stage studio phaser, the Suave mode is wet and deep.  The Tweak knob controls the amount of regeneration in the phase signal.  This mode has a unique twist - when the Depth control gets high enough the oscillator waveform \"folds back\" into itself for a super-deep sweep.\u003c\/li\u003e \u003cli\u003eDynámica:  This mode puts the control in your hands, literally.  The Tweak knob controls the sensitivity of the phaser to your guitar input volume, and the Rate knob sets the maximum phaser speed.  Set the Rate below noon to increase speed with higher volumes, set above noon to decrease speed with louder signals. Hint:  Try Envelope mode mixed fully wet, with low Intensity for a volume sensing vibrato.\u003c\/li\u003e \u003cli\u003eLoco:  This one is pretty crazy.  The Tweak knob controls the feedback of the phase signal, and is linked to a ring modulator for some intense modulation effects.  Might sound pretty gnarly, might sound pretty sweet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cp\u003eLa Calavera requires a 9V DC power supply with a 2.1mm pin, center negative.  La Calavera is not designed to be powered on supplies higher than 9V and does not use a battery.  La Calavera should work fine on a multi-pedal \"daisy chain\" connector, but if you encounter excessive noise or hum try a separate power supply\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450195505255,"sku":"95301","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-calavera-black-blue_95301_1_7b31236f-a24a-4a49-9c68-1d51a5bb260d.jpg?v=1787092077"},{"product_id":"alexander-colour-theory","title":"Alexander Colour Theory","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Colour Theory\u003c\/strong\u003e combines a versatile eight-step sequencer with a powerful effects processor, creating rhythmic combinations seldom heard outside of a rack of synths.  It’s small but mighty, utilizing Alexander's Neo Series technology in a completely new way.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eWhat is a Step Sequencer?\u003c\/h3\u003e\r\n\r\n\u003cp\u003eImagine a drum machine that plays different sounds on each beat - kick, snare, kick, snare.  Now replace those drum sounds with pedal settings, and you’re getting close.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Colour Theory allows you to preset different values for its effects - each step of the sequence may be set to any values you like, so as the sequence plays the effect changes automatically.  You can set the Colour Theory to play a series of tones in OSC mode, or to open and close a filter in FLT mode.  The only limit is your own imagination.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eNeo Series\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sonic scientists at Alexander Pedals have been working overtime to cram the most pedal into the smallest box, and now present the Neo Series!  Each Neo Series pedal incorporates an advanced 32-bit microcontroller adding presets, expression, and MIDI capability.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Neo Series pedals are small but mighty!  Imagine having a single pedal on your board that can access up to 4 separate preset tones with a touch of your toe.  Connect an expression pedal to \"morph\" between two distinct settings for each preset for dynamic real-time effects.  Or connect the Neo Footswitch to enable your choice of preset select, tap tempo, or start \/ stop the sequence in real time.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePresets\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAll Neo Series pedals feature a simple yet powerful preset functionality.  Hold the bypass footswitch to move the pedal to the next available preset, and the pedal will reconfigure itself on the fly.  All knob values and the effect mode settings are recalled, allowing you to set up to four unique tones.  Want more presets?  Simply connect a MIDI controller to the EXP port on the side of the Neo Series pedal and access up to 16 presets total.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo load a preset, hold the bypass footswitch down or send a MIDI program change from 0-15.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo save a preset, hold the Select button down and then hold the bypass footswitch.  The pedal will save the current settings to the current preset.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAny changes you make to the pedal settings will be lost when switching to a new preset unless you save the current preset first, so be careful!\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450241085543,"sku":"98278","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-colour-theory_98278_1_dd8e63a0-f8f0-4b51-84f6-9400d50d22b8.jpg?v=1787092274"},{"product_id":"alexander-colour-theory-demo-deal","title":"Alexander Colour Theory (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eAlexander Colour Theory\u003c\/strong\u003e combines a versatile eight-step sequencer with a powerful effects processor, creating rhythmic combinations seldom heard outside of a rack of synths.  It’s small but mighty, utilizing Alexander's Neo Series technology in a completely new way.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eWhat is a Step Sequencer?\u003c\/h3\u003e\r\n\r\n\u003cp\u003eImagine a drum machine that plays different sounds on each beat - kick, snare, kick, snare.  Now replace those drum sounds with pedal settings, and you’re getting close.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Colour Theory allows you to preset different values for its effects - each step of the sequence may be set to any values you like, so as the sequence plays the effect changes automatically.  You can set the Colour Theory to play a series of tones in OSC mode, or to open and close a filter in FLT mode.  The only limit is your own imagination.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eNeo Series\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe sonic scientists at Alexander Pedals have been working overtime to cram the most pedal into the smallest box, and now present the Neo Series!  Each Neo Series pedal incorporates an advanced 32-bit microcontroller adding presets, expression, and MIDI capability.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Neo Series pedals are small but mighty!  Imagine having a single pedal on your board that can access up to 4 separate preset tones with a touch of your toe.  Connect an expression pedal to \"morph\" between two distinct settings for each preset for dynamic real-time effects.  Or connect the Neo Footswitch to enable your choice of preset select, tap tempo, or start \/ stop the sequence in real time.\u003c\/p\u003e\r\n\r\n\u003ch3\u003ePresets\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAll Neo Series pedals feature a simple yet powerful preset functionality.  Hold the bypass footswitch to move the pedal to the next available preset, and the pedal will reconfigure itself on the fly.  All knob values and the effect mode settings are recalled, allowing you to set up to four unique tones.  Want more presets?  Simply connect a MIDI controller to the EXP port on the side of the Neo Series pedal and access up to 16 presets total.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo load a preset, hold the bypass footswitch down or send a MIDI program change from 0-15.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo save a preset, hold the Select button down and then hold the bypass footswitch.  The pedal will save the current settings to the current preset.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAny changes you make to the pedal settings will be lost when switching to a new preset unless you save the current preset first, so be careful!\u003c\/p\u003e","brand":"Alexander","offers":[{"title":"Default Title","offer_id":44450269888615,"sku":"100285","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alexander-colour-theory_98278_1_1_de4a589f-21c9-4f91-9b98-ecc8b7a4d542.jpg?v=1787092392"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/alexander.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}