{"title":"Boredbrain","description":null,"products":[{"product_id":"boredbrain-terminal-v2","title":"Boredbrain Music Terminal v2 Pedal Signal Router","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Terminal v2\u003c\/strong\u003e adds routing flexibility to signal chains of guitar pedal effects, electronic instruments and other audio devices.\u003c\/p\u003e  \u003cp\u003eAre you playing with your cables more than your pedals? Terminal adds new routing possibilities to a more permanent setup. Its half-normalled configuration, which is also used in recording studio patch bays, allows an audio signal to pass “normally” and to be copied from the Green SND jack without interruption. However, the signal can also be cut off or replaced by patching into the RTN jack. It’s easy to insert effects and re-route instruments without pulling your rig apart.\u003c\/p\u003e  \u003cp\u003eThis simple but very useful design was originally a custom project for musician Tycho, who is using Terminal in his studio and live rigs to quickly patch between sections of pedal and instrument chains. Community interest in the product led Boredbrain to produce Terminal in limited batches, and then due to its popularity, it has now become a mainstay.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450797912167,"sku":"171935","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-terminal-v2_171935_1_9a26cf2c-ec6a-4940-a38d-f4b97c0779bb.jpg?v=1787094567"},{"product_id":"boredbrain-patchulator-v2","title":"Boredbrain Patchulator v2 8-Channel Mini Patch Bay","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Patchulator v2\u003c\/strong\u003e is the ultimate tool for quick experimental signal routing of guitar pedals, synths and more.\u003c\/p\u003e  \u003cp\u003eIs your pedalboard brain-dead? The Patchulator provides a tangle-free way to change the order of your effects to create new tones using little to no brainpower! With the provided mini cables, just patch signal from your guitar or bass into (and out of) each effect, then back out to your amp or mixer. Invent new and interesting sounds while your synapses are firing, simply by rearranging the sequence of effects! All your gear and cabling stays put. Oh, and any effect not patched is “truly” bypassed… Genius!\u003c\/p\u003e  \u003cp\u003eAre your cables giving you a brain freeze? In the world of electronic music, the Patchulator desktop patchbay becomes a powerful nerve center for your instruments, allowing you to share and swap effects all around your setup, without needing to solve a brainteaser. Just connect your keyboards, synthesizers, samplers, drum machines (or any sound source) to a few channels, then fill the other channels with your effects’ ins and outs. Using the mini patch cables, you can then route any of the effects into and out of the signal path of any instrument, just like a real patch bay! Hmmm… what will you mastermind?\u003c\/p\u003e  \u003cp\u003eIn the world of modular synthesizers, the Patchulator is the brainstem between your modules and outboard gear, since it uses both standard and mini phono plugs. So if your brain tissue needs some electro-stimulation, simply inject control voltages and audio signals directly from your modular into effects units and chains. Better yet, use two Patchulators and seriously expand your cranial capacity! Whatever it is that you can brainstorm – guitar pedals and studio effects, synths and samplers, grooveboxes and drum machines, modulars and modulation signals, mixers and recording interfaces – the Patchulator allows it all to interconnect.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450797944935,"sku":"171933","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-patchulator_171933_1_2cb3e27e-de56-4efa-965a-258855d2ffc8.jpg?v=1787094567"},{"product_id":"boredbrain-optx","title":"Boredbrain Optx ADAT Optical Converter Module","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Optx\u003c\/strong\u003e is a compact and bi-directional ADAT lightpipe converter for eurorack synthesizers. The module provides 8 channels of input and output expansion to many pro audio interfaces, and may be used standalone to interconnect eurorack systems.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eADAT ENCODING \u0026amp; DECODING\u003c\/h3\u003e  \u003cp\u003eSome computer audio interfaces are equipped with one or more pairs of ADAT expansion ports allowing for additional input and output channels. Optx takes full advantage of these often unused ports, providing multi-channel connections directly to and from eurorack systems.\u003c\/p\u003e  \u003cp\u003eThe module accepts any 8-channel ADAT encoded digital signal at the Rx TOSLINK jack (via lightpipe optical cable) and converts it into 8 discrete analog signals available at the OUT 1-8 jacks.\u003c\/p\u003e  \u003cp\u003eConversely, Optx accepts 8 discrete analog signals at the IN 1-8 jacks and converts them into an 8-channel ADAT encoded digital signal available at the Tx jack.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eDC-COUPLED\u003c\/h3\u003e  \u003cp\u003eThe module’s analog outputs are DC-coupled, meaning signals can be AC (audio) or DC (control voltages). So when used in conjunction with software such as Bitwig Studio or Ableton CV Tools, Optx becomes an interface for outgoing control voltages like 1V\/oct pitch and gate signals, or LFOs, ADSRs and other modulators. The amount of creative potential here cannot be overstated.\u003c\/p\u003e  \u003ch3 id=\"toc_2\"\u003eSAMPLE CLOCK SYNCHRONIZATION\u003c\/h3\u003e  \u003cp\u003eThe module has three options for sample clock sync, selectable using the 3-way switch.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e44.1  Generates and syncs to internal clock of 44.1 kHz\u003c\/li\u003e \u003cli\u003eEXT   Syncs to external clock from ADAT signal at Rx\u003c\/li\u003e \u003cli\u003e48    Generates and syncs to internal clock of 48 kHz\u003c\/li\u003e \u003c\/ul\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450797977703,"sku":"171932","price":329.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-optx_171932_1_003c0192-cbe4-4e06-b769-f5b2996f718b.jpg?v=1787094567"},{"product_id":"boredbrain-interfx-v2","title":"Boredbrain INTRFX v2 Effects Interface for Eurorack and Pedals","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain INTRFX\u003c\/strong\u003e facilitates effects processing between eurorack, guitar pedals and electronic instruments. Version 2 has been upgraded with high-quality 3.5 mm jacks, slide switches, premium finish, and is completely lead-free. Audio level conversion is now ±12 dB for use with more sensitive pedals (previously ±9 dB).\u003c\/p\u003e  \u003cp\u003eWant to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? INTRFX allows eurorack-level signals to be processed with pedals and\/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. And because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5 mm patch cables rather than bulkier 1\/4-inch cables.\u003c\/p\u003e  \u003cp\u003eFeedback effects can be achieved by switching into the “wrong” mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals when no effects are used.\u003c\/p\u003e  \u003cp\u003eWhether you’re patching eurorack through classic guitar pedals or running a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450798010471,"sku":"171934","price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-intrfx_171934_1_09d25629-522d-40ff-a52f-04cd16f80c1a.jpg?v=1787094567"},{"product_id":"boredbrain-injectr","title":"Boredbrain Injectr Electric Guitar Interface Module","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Injectr\u003c\/strong\u003e is a fully-equipped electric guitar and bass interface for eurorack synthesizers. The module features an overdrive-capable preamp, versatile amp simulator, and control voltage extractors designed to inject stringed instrument signals directly into the modular environment.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eINSTRUMENT PREAMP\u003c\/h3\u003e  \u003cp\u003eInjectr’s high-impedance instrument input, INST IN, feeds straight into a variable gain circuit which can produce a range of tonal responses, from clean to heavily overdriven. The smooth character of the DRIVE parameter is made possible by a soft-clipping topology using a classic 4558 op amp and four diodes, two silicon and two germanium.\u003c\/p\u003e  \u003cp\u003eA post-drive LEVEL control is provided to trim the output of the preamp stage, which is accompanied by a RED LED, indicating that the signal is reaching the typical eurorack audio level of 10 Vpp. Because stringed instruments tend to have strong transients, it is suggested to adjust the LEVEL control so that the LED is illuminated with moderate to heavy playing.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eCV EXTRACTOR\u003c\/h3\u003e  \u003cp\u003eBuffered directly from the instrument input is a responsive envelope follower circuit, which produces a control voltage signal at the ENV output jack based upon the input’s volume dynamics. The ENVELOPE parameter adjusts the sensitivity of the circuit, depending on how the instrument is being played. The adjacent WHITE LED is a visual indicator of the envelope follower’s output. The switch labeled SLOW MED FAST selects the follower’s response time, affecting both the rise (attack) and fall (release). An inverted copy (negative going voltage) is present at the ENV- output jack.\u003c\/p\u003e  \u003cp\u003eAdditionally, a 0-5 V gate control signal is present at the GATE output jack, which is derived from the envelope signal and is indicated by the GREEN LED. The sensitivity of the gate extractor circuit is adjusted using the GATE parameter, and essentially sets the threshold at which the gate signal is triggered on and off.\u003c\/p\u003e  \u003ch3 id=\"toc_2\"\u003eAMP SIMULATOR\u003c\/h3\u003e  \u003cp\u003eOne of Injectr’s most useful features is the Amp Simulator circuit. Using a complex arrangement of analog filters, it imparts an amplifier-like quality to the signal.\u003c\/p\u003e  \u003cp\u003eThe CHARACTER parameter alone can dramatically alter the sound, giving the user combined control over the middle “dip” frequency and bandwidth. The PRESENCE parameter adjusts the low-end response, thickening or thinning the overall tone, whereas the BRIGHT switch enhances high frequencies. In combination with pickup selection and tone controls of the guitar itself, these parameters provide a wide range of tones all while staying within the eurorack system. If preferred, the Amp Simulator can also be toggled off by disengaging the SIM ON switch.\u003c\/p\u003e  \u003ch3 id=\"toc_3\"\u003eFX LOOP\u003c\/h3\u003e  \u003cp\u003eThe module is equipped with a eurorack-level effects loop, FX SND and FX RTN, serving as an access point to process the signal after the Preamp\/Drive circuit but before the Amp Simulator. It is also useful to process the signal with eurorack modules before taking the signal back out using the Line Out.\u003c\/p\u003e  \u003cp\u003eHigh-gain modules such as overdrive\/distortion and intense compression may cause unwanted feedback in the FX Loop, and so are best patched after Injectr from the OUT jack.\u003c\/p\u003e  \u003ch3 id=\"toc_4\"\u003eOUTPUTS\u003c\/h3\u003e  \u003cp\u003eThe OUT jack provides a post-simulator eurorack-level audio signal, which is useful when it is to remain in the system to be processed or mixed with other signals.\u003c\/p\u003e  \u003cp\u003eThe LINE OUT jack provides the same signal at line-level, which is suitable for sending the signal out to external gear, interfaces and amplifiers.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450798043239,"sku":"171930","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-injectr_171930_1_47651840-1433-4cdb-adbf-459e7793e199.jpg?v=1787094567"},{"product_id":"boredbrain-eqx5","title":"Boredbrain Eqx5 Voltage-Controlled Equalizer Module","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain EQx5\u003c\/strong\u003e is an effective 5-band stereo equalizer for eurorack synthesizers. The module allows for quick and musical adjustments to the frequency content of audio signals, with voltage-control of all parameters for experimental EQ processing.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eFIVE FREQUENCY BANDS\u003c\/h3\u003e  \u003cp\u003eThe module has five bands of graphic equalization, each with ±12 dB of level boost or cut. The first order filters employed for equalization have slopes of 6 dB\/oct from their respective center frequencies.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eHIGH: 10 kHz shelf\u003c\/li\u003e \u003cli\u003eHI-MID: 4 kHz peak\u003c\/li\u003e \u003cli\u003eMID: 1 kHz peak\u003c\/li\u003e \u003cli\u003eLO-MID: 400 Hz peak\u003c\/li\u003e \u003cli\u003eLOW: 100 Hz shelf\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eAdjustments to these bands can make both subtle and dramatic changes to the frequency characteristics of the source audio signal(s). These adjustments can be useful in many scenarios such as attenuating problem frequencies and accentuating others, or strategically making “space” in the mix for specific sounds.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eBALANCE \u0026amp; LEVEL\u003c\/h3\u003e  \u003cp\u003eThe BALANCE parameter is essentially an equal-power crossfader which simultaneously and inversely affects the gain of the Left and Right channels. When a stereo signal is connected to the module’s inputs, this parameter functions like a Pan control, shifting the stereo image Left and Right. When two mono signals are connected to the module’s inputs and the OUT L+R mono output is used, this parameter functions like a volume crossfader with no perceivable level drop in the center.\u003c\/p\u003e  \u003cp\u003eThe LEVEL parameter is a post-eq volume adjustment, used primarily to compensate for level changes after frequency equalization. The module implements a pseudo-loudness feature, which gradually boosts the LOW and HIGH shelving filters as LEVEL is reduced. This helps to retain the signal’s “fullness” as it is attenuated, accounting for the equal-loudness contour.\u003c\/p\u003e  \u003ch3 id=\"toc_2\"\u003eCOMPLETE VOLTAGE CONTROL\u003c\/h3\u003e  \u003cp\u003eA key feature of EQx5 is the ability of all parameters to be controlled with external voltages, opening up a range of experimental possibilities in the eurorack environment.\u003c\/p\u003e  \u003cp\u003eThe amount of boost or cut for each band can be modulated using control voltage signals, with the full range being ±5 V (10 Vpp). The frequency band’s gain knob then defines the bias point to offset the incoming control voltage.\u003c\/p\u003e  \u003cp\u003eAdditionally, both BALANCE and LEVEL have their own respective CV inputs, also with a full range of ± 5 V. The LEVEL parameter can act very much like a VCA when used in combination with its CV input.\u003c\/p\u003e  \u003ch3 id=\"toc_3\"\u003eINPUT \u0026amp; OUTPUT\u003c\/h3\u003e  \u003cp\u003eThe two inputs, L and R, are designed for audio signals within the audible spectrum. These inputs are AC-coupled, and will block DC signals to reduce noise. R is normalled L, so if no plug is present, the channel will obtain a of copy of L.\u003c\/p\u003e  \u003cp\u003eIn addition to the two discrete L and R outputs, the module has a mono output, OUT L+R, which is the sum of the two channels. As mentioned previously, this output is useful when crossfading between two signals using the BALANCE parameter, or to conveniently obtain a mix of the two audio signals.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450798076007,"sku":"171931","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-eqx5_171931_1.jpg?v=1787094567"},{"product_id":"boredbrainunifx-fx-input-interface","title":"Boredbrain UniFX FX Input Interface","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain UniFX\u003c\/strong\u003e is a compact and flexible effects interface that interconnects guitar pedals and electronic instruments with eurorack synthesizers. The module re-scales audio levels, offers voltage-control over the dry\/wet mix, and uniquely allows for the primary and effects signals to swap sources.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eEFFECTS LOOP\u003c\/h3\u003e\r\n\u003cp\u003eUniFX makes it easy to process eurorack audio signals with pedals, or to process external instruments with eurorack modules. Essentially, it is a level-scaling effects loop. The module has two pairs of mono IN and OUT jacks for signals—3.5 mm at eurorack-level and 1\/4-inch at pedal-level. The slide switch labeled PEDALS-EUROFX swaps which jacks are used as the primary input\/output and which are the effects send\/return.\u003c\/p\u003e\r\n\u003cp\u003eTo process eurorack audio signals with guitar pedals or outboard gear, use PEDALS mode. The eurorack source signal is patched thru the 3.5 mm IN and OUT jacks, while any pedals are connected to the 1\/4-inch IN and OUT jacks.\u003c\/p\u003e\r\n\u003cp\u003eTo process line-level instruments or guitar with eurorack modules, use EUROFX mode. The line source signal is patched thru the 1\/4-inch IN and OUT jacks, while any effect\/filter\/etc modules are connected to the 3.5 mm IN and OUT jacks.\u003c\/p\u003e\r\n\u003cp\u003eAudio level scaling is approximately ± 12 dB, appropriate for most pedals.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eMIX CONTROL\u003c\/h3\u003e\r\n\u003cp\u003eThe FX MIX parameter is a variable crossfader controlling the dry\/wet balance of the input and effects return signals. The amount of effects mix is indicated by the WHITE LED. With the knob turned all the way down, only the input signal is heard from the OUT jack and the LED is off. Alternately, with the knob turned all the way up, only the effects return signal is heard and the LED is fully illuminated. The center position produces a 50\/50 mix.\u003c\/p\u003e\r\n\u003cp\u003eThis parameter may also be automated using the CV input labeled MIX, wherein the knob position is used to bias the incoming control voltage. The full range of the parameter is 10 Vpp, so a typical LFO of ± 5 V will fully sweep the FX MIX up and down if the knob is in the center position.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eVCA \u0026amp; FEEDBACK EFFECTS\u003c\/h3\u003e\r\n\u003cp\u003eBecause the circuit is VCA-based and DC-coupled, UniFX may also be used like a typical VCA module for both audio and control voltages. The only difference is that the control input works in reverse—as the voltage is increased, the signal is reduced. Simply run the primary signal through the 3.5mm IN and OUT jacks, connect nothing to the 1\/4-inch jacks, and select PEDALS mode using the switch. Turn the FX MIX all the way up to have no dry signal, and apply a negative going control voltage to the MIX CV input.\u003c\/p\u003e\r\n\u003cp\u003eAdditionally, due to UniFX’s switching effects loop topology, feedback effects can be easily achieved. Just slide the switch into the “wrong” mode, and turn the FX MIX parameter down to increase the amount of the effects return being fed back into the effects send. The MIX CV input can also be used for experimental voltage-controlled feedback effects.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450847162471,"sku":"177662","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-unifx_177662_1_cee4795b-5c72-4569-921c-1c76a475d65a.jpg?v=1787094777"},{"product_id":"boredbrain-xchangr-stereo-signal-interchange","title":"Boredbrain Xchangr Stereo Signal Interchange Module","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Xchangr\u003c\/strong\u003e is designed for low noise exchange of audio signals between high-fidelity stereo pedals and eurorack systems. The module features three stereo channels—two sends and one receive—each with switchable 12 or 18 dB boost\/cut to interface with digital pedals and line-level processors.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eSIGNAL INTERCHANGE\u003c\/h3\u003e\r\n\u003cp\u003eThe availability of quality stereo effects in pedal format still outnumbers those available in eurorack format, and thus processing eurorack-level signals with them is often desired. This requires proper attenuation and amplification, especially as the inputs of these digital effects can be unforgiving if the signals are too hot, have excess noise, or a slight DC offset.\u003c\/p\u003e\r\n\u003cp\u003eXchangr is meant to facilitate this signal interchange with its overall simplicity and purposely designed circuitry. Its three separate sections together exchange stereo audio with external processors at proper levels and with sonic transparency.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eLEVEL SCALING\u003c\/h3\u003e\r\n\u003cp\u003eThe upper two SND sections are identical, and both apply attenuation to pairs of discrete inputs (3.5 mm) to send into stereo pedals and line-level processors. Each is equipped with a two-position switch to select the amount of attenuation, either -12 dB or -18 dB. The right side input is normalled to the left, so if no plug is present, the right SND output (1\/4-inch) will copy the left.\u003c\/p\u003e\r\n\u003cp\u003eThe lower RCV section applies amplification to its pair of discrete inputs (1\/4-inch) to bring external audio back up to eurorack levels. It is also equipped with a switch to select the amount of amplification, either +12 dB or +18 dB. The right side input is normalled to the left, so if no plug is present, the right RCV output (3.5 mm) will copy the left.\u003c\/p\u003e\r\n\u003cp\u003eWhen interfacing with a stereo pedal, this leaves an extra SND pair on the module, which can be used for parallel processing or as an additional line output to a mixer, interface, or amplifier.\u003c\/p\u003e\r\n\u003cp\u003e±18 dB is suggested for high-fidelity pedals, and ±12 dB for rackmount or line-level processors.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eAUDIO FIDELITY\u003c\/h3\u003e\r\n\u003cp\u003eXchangr’s connections are AC-coupled specifically for audio signals. This means control voltages are not meant to pass through the module, and any DC offsets will be removed.\u003c\/p\u003e\r\n\u003cp\u003eThe inputs of the two SND sections use first order low pass filters just above 25 kHz to attenuate any high-frequency noise in the signals like EMI (Electromagnetic Interference). The signals also run through 1.5 Hz high pass filters to remove any DC offset just prior to being output.\u003c\/p\u003e\r\n\u003cp\u003eThe inputs of the RCV section employ 5 Hz rumble filters to reduce any unwanted low frequency noise prior to being amplified back up to eurorack-level.\u003c\/p\u003e\r\n\u003cp\u003eThe combined filtering sections, along with low-noise buffering, allow only the desired parts of the signal to be processed and returned. The result is clean and undistorted external stereo effects processing.\u003c\/p\u003e\r\n\u003cp\u003eAll 1\/4-inch inputs and outputs are TS unbalanced mono connections.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450847031399,"sku":"177663","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-xchangr_177663_1_58ac45b9-cb26-43a5-9f2e-80ac98c8f6f1.jpg?v=1787094777"},{"product_id":"boredbrain-monitr-master-output-control","title":"Boredbrain Monitr Master Output Control Module","description":"\u003cp\u003eThe \u003cstrong\u003eBordebrain Monitr\u003c\/strong\u003e is a comprehensive audio output monitoring utility for eurorack systems. The module is equipped with a stereo VCA-controlled input mixer with master volume control and VU meters, plus a powerful headphone section for both live performance and detailed monitoring.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eSTEREO VCA MIXER\u003c\/h3\u003e\r\n\u003cp\u003eMonitr’s two stereo inputs, IN 1 and IN 2, are AC-coupled specifically for audio signals, with the R inputs normalled to the L inputs. These input signals are amplified and mixed via stereo VCA circuits to reduce noise and allow for external voltage control. The CHAN 1 and CHAN 2 parameters are for manual adjustments of audio levels, while the VCA1 and VCA2 jacks accept control voltages. The full range of each stereo VCA is 10 Vpp. The mixed stereo signal is buffered and passed on to the master volume circuit.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eMASTER CONTROL\u003c\/h3\u003e\r\n\u003cp\u003eThe VOLUME parameter is a variable attenuator which controls the master stereo output level. It can also amplify the signal up to +6 dB above unity gain.\u003c\/p\u003e\r\n\u003cp\u003eThe output volume is visually indicated by two 5-segment VU METERS, scaled appropriately for +4 dBu professional line-level output. Best practice is to keep the master signal volumes at or below +3 dBu (GREEN, YELLOW), with transient peaks occasionally reaching +6 dBu (RED). This will optimize the signal’s dynamic range when feeding into audio interfaces or amplifiers.\u003c\/p\u003e\r\n\u003cp\u003eMonitr also features a MUTE OUTPUT switch that completely silences the main outputs. This is convenient once sound check levels are adjusted before a live performance begins, as the mute switch does not affect the VU meters or headphone cueing section.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eHEADPHONE CUE\u003c\/h3\u003e\r\n\u003cp\u003eThe module’s headphone circuit is designed to drive a wide-range of headphones with enough detail and power for both studio monitoring and live performance. The LEVEL parameter adjusts the volume of stereo headphone plugged into the PHONES jack. Acceptable headphone impedance ranges from 32 Ω up to 600 Ω.\u003c\/p\u003e\r\n\u003cp\u003eThe headphone source is selected with a 3-way switch, which is useful for cueing during a live performance. The center position, MSTR (Master), monitors the primary master output signal post Volume, so the master VOLUME also affects the headphone volume. The other two positions, CH1 and CH2, exclusively monitor the two input signals respectively, and are not affected by their VCA levels (CHAN 1, CHAN 2, VCA1, or VCA2).\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44450847064167,"sku":"177661","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-monitr_177661_1_f5673bc2-bc6b-491e-9711-77fee04afe57.jpg?v=1787094777"},{"product_id":"boredbrain-intrfx-v2-effects-interface-for-eurorack-and-pedals-demo-deal","title":"Boredbrain INTRFX v2 Effects Interface for Eurorack and Pedals (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain INTRFX\u003c\/strong\u003e facilitates effects processing between eurorack, guitar pedals and electronic instruments. Version 2 has been upgraded with high-quality 3.5 mm jacks, slide switches, premium finish, and is completely lead-free. Audio level conversion is now ±12 dB for use with more sensitive pedals (previously ±9 dB).\u003c\/p\u003e  \u003cp\u003eWant to connect outboard gear to your eurorack synthesizer without taking up valuable HP in your case? INTRFX allows eurorack-level signals to be processed with pedals and\/or outboard effects, and also allows line-level instruments to be processed with eurorack modules. Each of its three channels has an Interchange Switch to swap this mode, as well as an FX Blend parameter which can be controlled via CV. And because of its compact physical design, the INTRFX can be placed almost anywhere and connected to eurorack systems with 3.5 mm patch cables rather than bulkier 1\/4-inch cables.\u003c\/p\u003e  \u003cp\u003eFeedback effects can be achieved by switching into the “wrong” mode, sending the FX return back into the FX send, while still allowing for dry signal blend and modulation. Channels can also be patched into one another and toggled between modes for experimental routing. Conveniently, each channel can operate as a reversed linear VCA for both audio and DC signals when no effects are used.\u003c\/p\u003e  \u003cp\u003eWhether you’re patching eurorack through classic guitar pedals or running a drum machine through your gnarliest modules, INTRFX makes these connections easy and flexible.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451012116583,"sku":"212003","price":166.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-intrfx_171934_1_fe4e75f8-f9c2-445d-8430-c6aabed5e521.jpg?v=1787095488"},{"product_id":"boredbrain-eqx5-demo-deal-open-box","title":"Boredbrain Eqx5 Voltage-Controlled Equalizer Module (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain EQx5\u003c\/strong\u003e is an effective 5-band stereo equalizer for eurorack synthesizers. The module allows for quick and musical adjustments to the frequency content of audio signals, with voltage-control of all parameters for experimental EQ processing.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eFIVE FREQUENCY BANDS\u003c\/h3\u003e  \u003cp\u003eThe module has five bands of graphic equalization, each with ±12 dB of level boost or cut. The first order filters employed for equalization have slopes of 6 dB\/oct from their respective center frequencies.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eHIGH: 10 kHz shelf\u003c\/li\u003e \u003cli\u003eHI-MID: 4 kHz peak\u003c\/li\u003e \u003cli\u003eMID: 1 kHz peak\u003c\/li\u003e \u003cli\u003eLO-MID: 400 Hz peak\u003c\/li\u003e \u003cli\u003eLOW: 100 Hz shelf\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003eAdjustments to these bands can make both subtle and dramatic changes to the frequency characteristics of the source audio signal(s). These adjustments can be useful in many scenarios such as attenuating problem frequencies and accentuating others, or strategically making “space” in the mix for specific sounds.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eBALANCE \u0026amp; LEVEL\u003c\/h3\u003e  \u003cp\u003eThe BALANCE parameter is essentially an equal-power crossfader which simultaneously and inversely affects the gain of the Left and Right channels. When a stereo signal is connected to the module’s inputs, this parameter functions like a Pan control, shifting the stereo image Left and Right. When two mono signals are connected to the module’s inputs and the OUT L+R mono output is used, this parameter functions like a volume crossfader with no perceivable level drop in the center.\u003c\/p\u003e  \u003cp\u003eThe LEVEL parameter is a post-eq volume adjustment, used primarily to compensate for level changes after frequency equalization. The module implements a pseudo-loudness feature, which gradually boosts the LOW and HIGH shelving filters as LEVEL is reduced. This helps to retain the signal’s “fullness” as it is attenuated, accounting for the equal-loudness contour.\u003c\/p\u003e  \u003ch3 id=\"toc_2\"\u003eCOMPLETE VOLTAGE CONTROL\u003c\/h3\u003e  \u003cp\u003eA key feature of EQx5 is the ability of all parameters to be controlled with external voltages, opening up a range of experimental possibilities in the eurorack environment.\u003c\/p\u003e  \u003cp\u003eThe amount of boost or cut for each band can be modulated using control voltage signals, with the full range being ±5 V (10 Vpp). The frequency band’s gain knob then defines the bias point to offset the incoming control voltage.\u003c\/p\u003e  \u003cp\u003eAdditionally, both BALANCE and LEVEL have their own respective CV inputs, also with a full range of ± 5 V. The LEVEL parameter can act very much like a VCA when used in combination with its CV input.\u003c\/p\u003e  \u003ch3 id=\"toc_3\"\u003eINPUT \u0026amp; OUTPUT\u003c\/h3\u003e  \u003cp\u003eThe two inputs, L and R, are designed for audio signals within the audible spectrum. These inputs are AC-coupled, and will block DC signals to reduce noise. R is normalled L, so if no plug is present, the channel will obtain a of copy of L.\u003c\/p\u003e  \u003cp\u003eIn addition to the two discrete L and R outputs, the module has a mono output, OUT L+R, which is the sum of the two channels. As mentioned previously, this output is useful when crossfading between two signals using the BALANCE parameter, or to conveniently obtain a mix of the two audio signals.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451047112807,"sku":"218018","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-eqx5_171931_1_57931248-01f3-4aa5-bbdc-573e42fc64e0.jpg?v=1787095621"},{"product_id":"boredbrain-xcelon-xp3-3-channel-stereo-expander-module","title":"Boredbrain Xcelon XP3 3 Channel Stereo Expander Module","description":"\u003cp\u003e\u003cstrong\u003eBored Brain Xcelon XP3\u003c\/strong\u003e is a three-channel stereo expander for the Xcelon eurorack mixer. The module’s channels are identical to those found on the main mixer. Up to two XP3 can connect to Xcelon, expanding the total number of mixer channels to either nine or twelve.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451077324903,"sku":"354276","price":339.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-xcelon-xp3-3-channel-stereo-expander-module-24_354276_1_2d67c0e7-a0e6-4b06-9fd3-8dd6b49006fa.jpg?v=1787095744"},{"product_id":"boredbrain-xcelon-stereo-voltage-controlled-mixer-module","title":"Boredbrain Xcelon Stereo Voltage Controlled Mixer Module","description":"\u003cp\u003e\u003cstrong\u003eBored Brain Xcelon\u003c\/strong\u003e is an all-analog six-channel stereo audio mixer for eurorack modular systems. With an interface designed for immediate hands-on control and visual feedback, plus extensive CV and expandability, the module is a powerful mixing tool for both performance and production.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451077357671,"sku":"354275","price":899.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-xcelon-stereo-voltage-controlled-mixer-module-24_354275_1_693c3e81-ed0a-404f-ad1d-13ea074d628d.jpg?v=1787095744"},{"product_id":"boredbrain-trs-12-channel-direct-output-module","title":"Boredbrain TRS 12-Channel Direct Output Module","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain TRS\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. TRS can interface with the IO module and\/or Xcelon mixer for twelve balanced audio outputs, or up to twenty-four using two TRS modules.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eOn the front of the module are twelve TRS jacks, which each output balanced line-level audio signals. The channel numbers above each jack (OUT 1-12) correspond to those on the rear input ports.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe two input ports on the back of the module (INPUT 1-6, 7-12) accept signals from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When connected to the IO module, these ports accept groups of six individual input signals. Similarly, when connected to the Xcelon mixer or XP3 channel expander, these ports accept banks of three stereo mixer channels for direct output. The connections to these ports can be mixed and matched in any order, and both the PRE and POST direct outputs for a bank of channels (Xcelon) can be used simultaneously.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451080568935,"sku":"380630","price":259.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-trs-12-channel-direct-output-module-24_380630_1_73e1a18e-324c-4d70-b653-753ef7dafc2b.jpg?v=1787095756"},{"product_id":"boredbrain-io-30-channel-direct-input-output-module","title":"Boredbrain IO 30-Channel Direct Input\/Output Module","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain IO\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. IO can be used as signal inputs for the DB25 and TRS modules, or alternatively to provide the Xcelon mixer with up to fifteen stereo direct outputs at eurorack level.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eOn the front of the module are twenty-seven 3.5 mm jacks, which can serve as either inputs or outputs depending on how the rear ports are connected. The first twenty-four are mono, and the last three are stereo, with numbers above each jack (1-30) corresponding to those on the rear input\/output ports.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe five connection ports on the back of the module (IN\/OUT 1-6, 7-12, 13-18, 19-24, 25-30) can each send or receive six signals to or from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When these ports are connected to the DB25 or TRS modules, the IO front jacks act as signal inputs for those modules. Alternatively, when connected to the Xcelon mixer or XP3 channel expander (PRE or POST or both), the IO front jacks act as eurorack level direct outputs for the stereo mixer channels. The connections to these ports can be mixed and matched in any order with compatible modules connecting to any of the ports.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451080634471,"sku":"380629","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-io-30-channel-direct-input-output-module-24_380629_1_7fcc18da-ee33-4bfd-a5c7-a1f2b60d81ec.jpg?v=1787095757"},{"product_id":"boredbrain-db25-24-channel-d-sub-direct-output-module","title":"Boredbrain DB25 24-Channel D-Sub Direct Output Module","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain DB25\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. DB25 can interface with the IO module and\/or Xcelon mixer for up to twenty-four balanced audio outputs.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eOn the front of the module are three 25-pin D-Sub connectors, which each output eight channels of balanced line-level audio for a total of twenty-four outputs. The channel numbers next to each DB25 connector (1-8, 9-16, 17-24) correspond to those on the rear input ports.\u003c\/p\u003e\r\n\r\n\u003cp\u003eNOTE: The pin-out for these connectors is consistent with standard DB25 balanced audio snakes like the Hosa DTP-800 series.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe four input ports on the back of the module (INPUT 1-6, 7-12, 13-18, 19-24) accept signals from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When connected to the IO module, these ports accept groups of six individual input signals. Similarly, when connected to the Xcelon mixer or XP3 channel expander, these ports accept banks of three stereo mixer channels for direct output. The connections to these ports can be mixed and matched in any order, and both the PRE and POST direct outputs for a bank of channels (Xcelon) can be used simultaneously.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451080601703,"sku":"380631","price":279.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-db25-24-channel-d-sub-direct-output-module-24_380631_1_e619a361-98bc-4ed0-8713-2c951ed30efd.jpg?v=1787095757"},{"product_id":"boredbrain-optx-v2-adat-optical-converter-module","title":"Boredbrain Optx v2 ADAT Optical Converter Module","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Optx v2\u003c\/strong\u003e is a pro-quality ADAT lightpipe converter for eurorack modular synthesizers. The DC-coupled module can encode and decode audio signals with extremely low noise, and CV signals with near-zero offset. Additionally, on-board sample clock allows for one-way ADAT output and the ability to be used standalone to interconnect eurorack systems.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eADAT ENCODING AND DECODING\u003c\/h3\u003e\r\n\r\n\u003cp\u003eMany computer audio interfaces are equipped with one or more pairs of ADAT expansion ports allowing for additional input and output channels. Optx v2 takes full advantage of these often unused ports, providing multi-channel connections directly to and from eurorack systems.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe module accepts any 8-channel ADAT encoded digital signal at the Rx TOSLINK jack (via lightpipe optical cable) and converts it into 8 discrete analog signals. Conversely, Optx v2 accepts 8 discrete analog signals and converts them into an 8-channel ADAT encoded digital signal available at the Tx jack.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhen used in conjunction with software such as Bitwig Studio or Ableton CV Tools, Optx v2 is an excellent interface not just for audio, but also control voltages like 1V\/oct pitch and gate signals, or LFOs, ADSRs and other modulators.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003ePRECISION AND PERFORMANCE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eOptx v2 has been fitted with high-performance op amp input buffers and professional-grade Cirrus Logic analog-to-digital converters with extremely low noise and distortion, maximum dynamic range, and excellent overall detail. The inputs and outputs have very precise level scaling with a range of 20 Vpp (±10 V). Thus a typical eurorack audio signal of 10 Vpp will translate to exactly -6 dBFS, while maintaining an equal amount of headroom.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe module’s high-quality analog outputs, OUT 1-8, are DC-coupled and support both audio and CV (control voltage) signals at all times.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe module’s analog inputs, IN 1-8, also accept both audio and CV signals. To ensure the best possible quality and precision, each pair of inputs has a front-panel switch that selects the conversion mode appropriate for each of these two signal types.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIn AUDIO mode, the selected input pair is AC-coupled by enabling high-pass filters within the ADC. This guarantees that the audio signals are converted with no DC offset and the best possible signal-to-noise ratio.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIn CV mode, the selected input pair is DC-coupled, and CV signals are converted with accuracy and precision. When switched into CV mode, the input pair undergoes a self-calibration period of 5 seconds to detect and then actively correct any inherent DC offset.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eNote: For critical CV input signals such as 1V\/oct pitch, re-calibrating after warm-up (25 minutes) can yield even better accuracy.\u003c\/em\u003e\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eON-BOARD SAMPLE CLOCK\u003c\/h3\u003e\r\n\r\n\u003cp\u003eSample clock synchronization is essential for high-quality digital conversion that is accurate and free from jitter. Like its predecessor, Optx v2 can either sync to an external sample clock via ADAT input, or produce its own stable clock so that other devices can instead sync to the module.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThere are two settings for sample clock sync selectable using dip switches on the back of the module. The first switch, SYNC, selects whether Optx v2 syncs to an external sample clock (EXT) or to its own (INT). The second switch, RATE, determines the sample rate of the on-board sample clock (44.1 or 48 kHz).\u003c\/p\u003e\r\n\r\n\u003cp\u003eFor a typical two-way ADAT connection with an audio interface, it is recommended to sync Optx v2 to the external clock of the interface by setting the SYNC switch to EXT. This requires a valid ADAT signal at the Tx jack, and is acknowledged by the BLUE LED labeled EXT SYNC.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIf the audio interface does not have an ADAT output port, Optx v2 can provide sample clock to the interface by setting the SYNC switch to INT and choosing the desired sample rate with the RATE switch.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIt is also possible to directly interconnect two Optx modules (v1 or v2). This is similar to the two-way connection with an audio interface. In this case, one Optx must be set to internal sample clock sync (INT) and the other to external sync (EXT).\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cem\u003eNote: For users of Push 3, the simplest configuration is to set Optx v2 to EXT and ensure Push 3 is set to Internal sample clock sync of either 44.1 or 48 kHz. The blue LED should illuminate indicating proper sync.\u003c\/em\u003e\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003eSIGNAL LEDS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eOptx v2 also provides visual signal indication of the 8 decoded ADAT channels feeding the OUT 1-8 jacks. Each pair of WHITE LEDs indicates the polarity (-Ve left, +Ve right) and relative strength of the signal (±10 V).\u003c\/p\u003e\r\n\r\n\u003cp\u003eAudio-rate signals will generally light both LEDs continuously, whereas LFOs will alternate more apparently between the two. Gates, triggers and positive-going envelopes will generally light only the right LED (+Ve).\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_4\"\u003e+5 V POWER SOURCE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eSome of the circuitry within Optx v2 requires a +5 V power source. This source can be selected using a jumper on the back of the module. When set to OPTX, the module will create +5 V from the +12 V power rail. When set to CASE, the module will use +5 V supplied by the PSU in the case.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451133063271,"sku":"459569","price":369.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-optx-v2_459569_1.jpg?v=1787095966"},{"product_id":"boredbrain-trs-12-channel-direct-output-module-demo-deal-open-box","title":"Boredbrain TRS 12-Channel Direct Output Module (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain TRS\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. TRS can interface with the IO module and\/or Xcelon mixer for twelve balanced audio outputs, or up to twenty-four using two TRS modules.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\n\n\u003cp\u003eOn the front of the module are twelve TRS jacks, which each output balanced line-level audio signals. The channel numbers above each jack (OUT 1-12) correspond to those on the rear input ports.\u003c\/p\u003e\n\n\u003cp\u003eThe two input ports on the back of the module (INPUT 1-6, 7-12) accept signals from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When connected to the IO module, these ports accept groups of six individual input signals. Similarly, when connected to the Xcelon mixer or XP3 channel expander, these ports accept banks of three stereo mixer channels for direct output. The connections to these ports can be mixed and matched in any order, and both the PRE and POST direct outputs for a bank of channels (Xcelon) can be used simultaneously.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451140698215,"sku":"461019","price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-trs-12-channel-direct-output-module-24_380630_1.jpg?v=1787095996"},{"product_id":"boredbrain-io-30-channel-direct-input-output-module-demo-deal-open-box","title":"Boredbrain IO 30-Channel Direct Input\/Output Module (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain IO\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. IO can be used as signal inputs for the DB25 and TRS modules, or alternatively to provide the Xcelon mixer with up to fifteen stereo direct outputs at eurorack level.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\n\n\u003cp\u003eOn the front of the module are twenty-seven 3.5 mm jacks, which can serve as either inputs or outputs depending on how the rear ports are connected. The first twenty-four are mono, and the last three are stereo, with numbers above each jack (1-30) corresponding to those on the rear input\/output ports.\u003c\/p\u003e\n\n\u003cp\u003eThe five connection ports on the back of the module (IN\/OUT 1-6, 7-12, 13-18, 19-24, 25-30) can each send or receive six signals to or from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When these ports are connected to the DB25 or TRS modules, the IO front jacks act as signal inputs for those modules. Alternatively, when connected to the Xcelon mixer or XP3 channel expander (PRE or POST or both), the IO front jacks act as eurorack level direct outputs for the stereo mixer channels. The connections to these ports can be mixed and matched in any order with compatible modules connecting to any of the ports.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451140632679,"sku":"461018","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-io-30-channel-direct-input-output-module-24_380629_1.jpg?v=1787095996"},{"product_id":"boredbrain-db25-24-channel-d-sub-direct-output-module-demo-deal-open-box","title":"Boredbrain DB25 24-Channel D-Sub Direct Output Module (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain DB25\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. DB25 can interface with the IO module and\/or Xcelon mixer for up to twenty-four balanced audio outputs.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\n\n\u003cp\u003eOn the front of the module are three 25-pin D-Sub connectors, which each output eight channels of balanced line-level audio for a total of twenty-four outputs. The channel numbers next to each DB25 connector (1-8, 9-16, 17-24) correspond to those on the rear input ports.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: The pin-out for these connectors is consistent with standard DB25 balanced audio snakes like the Hosa DTP-800 series.\u003c\/p\u003e\n\n\u003cp\u003eThe four input ports on the back of the module (INPUT 1-6, 7-12, 13-18, 19-24) accept signals from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When connected to the IO module, these ports accept groups of six individual input signals. Similarly, when connected to the Xcelon mixer or XP3 channel expander, these ports accept banks of three stereo mixer channels for direct output. The connections to these ports can be mixed and matched in any order, and both the PRE and POST direct outputs for a bank of channels (Xcelon) can be used simultaneously.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451140960359,"sku":"461020","price":296.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-db25-24-channel-d-sub-direct-output-module-24_380631_1.jpg?v=1787095996"},{"product_id":"boredbrain-terminal-v2-demo-deal-open-box","title":"Boredbrain Music Terminal v2 Pedal Signal Router (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eBoredbrain Terminal v2\u003c\/strong\u003e adds routing flexibility to signal chains of guitar pedal effects, electronic instruments and other audio devices.\u003c\/p\u003e  \u003cp\u003eAre you playing with your cables more than your pedals? Terminal adds new routing possibilities to a more permanent setup. Its half-normalled configuration, which is also used in recording studio patch bays, allows an audio signal to pass “normally” and to be copied from the Green SND jack without interruption. However, the signal can also be cut off or replaced by patching into the RTN jack. It’s easy to insert effects and re-route instruments without pulling your rig apart.\u003c\/p\u003e  \u003cp\u003eThis simple but very useful design was originally a custom project for musician Tycho, who is using Terminal in his studio and live rigs to quickly patch between sections of pedal and instrument chains. Community interest in the product led Boredbrain to produce Terminal in limited batches, and then due to its popularity, it has now become a mainstay.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451148169319,"sku":"462178","price":116.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-terminal-v2_171935_1_6c97ad68-c987-48a1-8617-660e8e08630d.jpg?v=1787096025"},{"product_id":"boredbrain-xcelon-xp3-3-channel-stereo-expander-module-demo-deal-open-box","title":"Boredbrain Xcelon XP3 3 Channel Stereo Expander Module (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eBored Brain Xcelon XP3\u003c\/strong\u003e is a three-channel stereo expander for the Xcelon eurorack mixer. The module’s channels are identical to those found on the main mixer. Up to two XP3 can connect to Xcelon, expanding the total number of mixer channels to either nine or twelve.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451149054055,"sku":"461784","price":359.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-xcelon-xp3-3-channel-stereo-expander-module-24_354276_1.jpg?v=1787096028"},{"product_id":"boredbrain-io-30-channel-direct-input-output-module-demo-deal","title":"Boredbrain IO 30-Channel Direct Input\/Output Module (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain IO\u003c\/strong\u003e is part of Boredbrain’s direct multi-channel audio series of modules, which interconnect to provide a multitude of audio outputs to eurorack systems. IO can be used as signal inputs for the DB25 and TRS modules, or alternatively to provide the Xcelon mixer with up to fifteen stereo direct outputs at eurorack level.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_0\"\u003eFLEXIBLE INTERCONNECTION\u003c\/h3\u003e\n\n\u003cp\u003eOn the front of the module are twenty-seven 3.5 mm jacks, which can serve as either inputs or outputs depending on how the rear ports are connected. The first twenty-four are mono, and the last three are stereo, with numbers above each jack (1-30) corresponding to those on the rear input\/output ports.\u003c\/p\u003e\n\n\u003cp\u003eThe five connection ports on the back of the module (IN\/OUT 1-6, 7-12, 13-18, 19-24, 25-30) can each send or receive six signals to or from compatible Boredbrain modules using the supplied 8-pin ribbon cables. When these ports are connected to the DB25 or TRS modules, the IO front jacks act as signal inputs for those modules. Alternatively, when connected to the Xcelon mixer or XP3 channel expander (PRE or POST or both), the IO front jacks act as eurorack level direct outputs for the stereo mixer channels. The connections to these ports can be mixed and matched in any order with compatible modules connecting to any of the ports.\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":44451185000551,"sku":"471240","price":90.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/boredbrain-io-30-channel-direct-input-output-module-24_380629_1_83e3e29d-d88e-41b0-9574-59b43ac0724c.jpg?v=1787096183"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/boredbrain.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}