{"title":"Disaster Area Designs","description":null,"products":[{"product_id":"disaster-area-designs-dmc-3xl-gen3","title":"Disaster Area Designs DMC-3XL Gen3 - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMC-3XL Gen3\u003c\/strong\u003e is the next generation compact MIDI controller from Disaster Area who have added lots of features, connectivity, and capability, making the DMC-3XL Gen3 a next-level upgrade for your pedalboard control needs.\u003c\/p\u003e  \u003ch3\u003eMore MIDI Control\u003c\/h3\u003e  \u003cp\u003eControl up to four MIDI devices plus any combination of Disaster Area pedalboard switching systems.  Note that enabling any of the looper modes will disable control for the fourth MIDI device.\u003c\/p\u003e  \u003ch3\u003eImproved LED Indication and Display\u003c\/h3\u003e  \u003cp\u003eDisaster Area has moved the LEDs to the center of the pedal, putting all of the info you need in one place.  The LEDs now show the bypass \/ engage status of the individual MIDI devices, the looper state, and the clock or tap tempo rate. The display has also been upgraded, and now features full alphanumeric capability.  Both display and LEDs may be dimmed in the setup menu to suit indoor or outdoor venues.\u003c\/p\u003e  \u003ch3\u003eBuilt-in SMARTClock\u003c\/h3\u003e  \u003cp\u003eThe DMC-3XL Gen3 adds in support for sending MIDI Clock or tap tempo to your connected devices, without any additional hardware.  Our innovative MultiJack connector can operate as an expression pedal input, tap tempo footswitch input, MIDI output, or isolated tap tempo output.  The DMC-3XL Gen2 can send either a global tempo \/ BPM for all presets, or a new tempo \/ BPM for each preset.\u003c\/p\u003e  \u003ch3\u003eUser-Definable CC Command Mode\u003c\/h3\u003e  \u003cp\u003eBased on customer requests, the CC mode that allows the user to define any two commands for the left and right footswitches has been added.  Send one-shot, momentary, or toggle CC messages, MIDI notes, or change banks on your Strymon devices in this handy mode.  (requires firmware v1.01 or higher!)\u003c\/p\u003e  \u003ch3\u003eOptional gHOST Compatiblity\u003c\/h3\u003e  \u003cp\u003eThe DMC-3XL Gen3 can control an external USB-MIDI device including the popular Zoom MS-50G, MS-60B, and MS-70CDR using its native USB port.  Connect your USB-MIDI device to the DMC-3XL Gen3 USB port through our gHOST adaptor, install the USB HOST firmware, and you’re all set!  The DMC-3XL Gen3 can power most USB-MIDI devices, but please note that the power supply you’re using must be sufficient to power the DMC plus the connected device.  Powering a USB device may require as much as 500mA, so be sure your power supply can handle the load.\u003c\/p\u003e  \u003ch3\u003eSeparate Expression and Roller Configuration\u003c\/h3\u003e  \u003cp\u003ehundreds of players all over the world are in love with the expression rollers on their DMC-3XL Gen2 controllers.  It’s a great way to add expression control without giving up valuable pedalboard real estate, but in the Gen2 the roller and expression input are connected so that you can only use one at a time.  In the Gen3, roller has its own input channel, so that you can assign it independently from the expression input.\u003c\/p\u003e  \u003ch3\u003eMultiJack\u003c\/h3\u003e  \u003cp\u003eThe MultiJack has been over from the SMARTClock, but has been taught some new tricks!  Now it can function as an expression pedal input, tap tempo footswitch input, or a second MIDI output by connecting the Disaster Area TRS to MIDI Adaptor Cable.  You can use our TRS Control Cable for Chase Bliss Audio to connect your Tonal Recall, Warped Vinyl or other Chase Bliss pedal for full MIDI control.  Want more?  Flip the DIP switches inside the pedal and the MultiJack can act as an isolated tap tempo output to your non-MIDI gear.  Any of the pedals listed over on the TNT or SMARTClock pages can be controlled by the MultiJack.\u003c\/p\u003e  \u003ch3\u003eMIDI Input and Output\u003c\/h3\u003e  \u003cp\u003ethe 5-pin MIDI jack on the DMC-3XL operates as a MIDI output, of course, but if you connect the Disaster Area MIDI Y-Cable, you can also send MIDI in to the DMC-3XL Gen3.  Want to connect your old DMC Gen2 to your brand new Gen3?  No problem!  How about sending MIDI clock into your chain from a drum machine?  Sure, that’ll work.\u003c\/p\u003e  \u003ch3\u003eEasy Firmware Update\u003c\/h3\u003e  \u003cp\u003eno more driver installation, app downloads, or weird Windows errors!  Simply hold the mode button and plug in your DMC, and it shows up on your desktop as a flash drive.  Drag and drop the new firmware over and you’re all set!  (Mac folks will have to type three keystrokes, but you can handle that!)  And our new 32-bit processor has more than eight times the available power of the Gen2 family.\u003c\/p\u003e  \u003ch3\u003eWhat can the DMC-3XL Gen3 do for me?\u003c\/h3\u003e  \u003cp\u003eIf you have one MIDI device, the DMC-3XL Gen3 can simplify selecting programs, send it expression or tap tempo, or even keep it locked in to a MIDI clock.  You can also control the loop recorder \/ looper on several popular devices such as the Strymon Timeline, Eventide H9, and Line 6 M9 \/ M13.\u003c\/p\u003e  \u003cp\u003eAs helpful as the DMC-3XL Gen3 is for single device users, it really shines when used with multiple pedals.  Instead of scrolling around on each device to select a program for your next song, the DMC can send simultaneous commands to all of your pedals to select the exact patches you want with a single tap!  Using our Preset Mode, changing sounds on all of your MIDI pedals is as easy as changing the channel on your TV remote.  The DMC-3XL Gen3 can control up to four separate devices, or three devices plus a looper.\u003c\/p\u003e  \u003cp\u003eIf you want to change your non-MIDI pedals along with your presets, you can add in one of our DPC-8EZ switching systems.  The DMC-3XL Gen3 will seamlessly control the DPC-8EZ, so that one tap will reconfigure your entire pedalboard in milliseconds.\u003c\/p\u003e  \u003cp\u003eAnd by adding our new Clock Mode, they've taken pedalboard control to a new level!  You can select your tempo by BPM, or tap in a new tempo any time.  The DMC-3XL Gen3 allows for a global tempo that you can tap in at any time, or preset tempos that change along with your MIDI programs.  You can even configure the MultiJack to send taps to your non-MIDI devices with tap tempo inputs.\u003c\/p\u003e  \u003ch3\u003eWhat do I need to hook all this stuff up?\u003c\/h3\u003e  \u003cp\u003eYou’ll need one MIDI cable for each device you want to connect to the DMC-3XL Gen3.  MIDI is a communication protocol, and a single MIDI cable is capable of sending data to up to 16 different places on separate MIDI channels.  If you want to connect multiple MIDI devices together, you can generally hook the output of the first device (like the DMC) into the input of the second device, then the output of the second device runs into the input of the third device and so on.\u003c\/p\u003e  \u003cp\u003eExceptions to this rule include any device that does not have a MIDI output or thru connector (dead-end device)\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eAlexander Super Radical and Oblivion\u003c\/li\u003e \u003cli\u003eDigitech Whammy 4, 5, DT, Bass Whammy\u003c\/li\u003e \u003cli\u003ePigtronix Infinity\u003c\/li\u003e \u003cli\u003eEHX 8-Step Program\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eAlso, some devices that have a MIDI output do not pass incoming MIDI to it – the big offenders here are the Line 6 M5, M9, and M13.\u003c\/p\u003e  \u003cp\u003eSome devices have a MIDI output \/ thru but do not reliably pass incoming MIDI data – The Eventide Factor series and H9 are like this.\u003c\/p\u003e  \u003cp\u003eIf you have these problematic devices, you can either place them LAST in your MIDI chain, or you can use a MIDI Thru box such as the Disaster Area PBA-MS which will send full MIDI to three separate devices without daisy-chaining them.\u003c\/p\u003e  \u003cp\u003eThe DMC-3XL Gen3 also provides an additional option, by using the Disaster Area TRS to MIDI Adaptor Cable in the MultiJack.  If you’re not using the MultiJack for another purpose, this can get you one additional MIDI output for a dead-end device, and it supports an additional daisy-chain.  In this way, you can have two dead-end devices in your setup, each at the end of its own chain.\u003c\/p\u003e  \u003cp\u003eWant MORE MIDI outputs?  Connect a supported USB MIDI interface to the DMC-3XL Gen3’s USB port using the gHOST Adaptor and you can connect a third dead-end device or device chain.\u003c\/p\u003e  \u003cp\u003eYou can use an Empress MIDIBox to connect up to 4 Chase Bliss Audio or Empress devices.  Chase Bliss pedals use the ring terminal on their jack, so you’ll need to either purchase your MIDIBox modified to work with Chase Bliss, or you can get our inexpensive TRS Control Cable for Chase Bliss Audio.  If you only have one Chase Bliss or Empress device, you can just connect directly to the MultiJack with the appropriate cable.  Empress use a standard mono cable, Chase Bliss need the TRS Control Cable for Chase Bliss Audio.\u003c\/p\u003e  \u003ch3\u003eSupported MIDI Devices\u003c\/h3\u003e  \u003cp\u003eFull MIDI Control Support for the following devices:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eStrymon:  Timeline, Mobius, BigSky\u003c\/li\u003e \u003cli\u003eEventide:  H9, Space, Timefactor, Modfactor, Pitchfactor\u003c\/li\u003e \u003cli\u003eLine 6:  M5, M9, M13\u003c\/li\u003e \u003cli\u003eChase Bliss:  Warped Vinyl, Wombtone, Gravitas, Spectre, Tonal Recall (control up to 4 with an Empress MIDIBox, control a single pedal with our TRS Control Cable for Chase Bliss Audio)\u003c\/li\u003e \u003cli\u003eBoss DD-500 (full support,) SL-20 (clock only)\u003c\/li\u003e \u003cli\u003eElectro-Harmonix HOG2\u003c\/li\u003e \u003cli\u003ePigtronix Echolution 2 \/ Deluxe \/ Ultra\u003c\/li\u003e \u003cli\u003eAlexander:  Super Radical, Oblivion\u003c\/li\u003e \u003cli\u003eEmpress:  Reverb, Tremolo 2 (control up to four Empress devices using Empress MIDIBox, control a single pedal with a mono cable connected to the MultiJack)\u003c\/li\u003e \u003cli\u003ePanda Audio Future Impact I\u003c\/li\u003e \u003cli\u003eFree The Tone:  Flight Time Delay FT-1Y\u003c\/li\u003e \u003cli\u003eSource Audio Neuro Hub \/ Soundblox Hub:  control up to five One Series or Soundblox 2 series pedals from a single MIDI channel.  Control up to 20 (yes, twenty!) Source Audio pedals with a single DMC Gen3!\u003c\/li\u003e \u003cli\u003eDigiTech:  Whammy V, Bass Whammy (newest version) – works with Classic or Chords modes.\u003c\/li\u003e \u003cli\u003eGeneral MIDI:  Supports most MIDI devices, sends program changes 0-127 and MIDI CC for tap tempo, expression, and performance switch controls.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eFeatures and Specifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSturdy cast aluminum enclosure\u003c\/li\u003e \u003cli\u003eEnclosure Dimensions 4.8″ x 2.6″ x 1.4″\u003c\/li\u003e \u003cli\u003eSoft-touch footswitches\u003c\/li\u003e \u003cli\u003eBlue LED display with 10 brightness levels\u003c\/li\u003e \u003cli\u003e5-pin MIDI port, doubles as MIDI input using the Disaster Area MIDI Y-Cable\u003c\/li\u003e \u003cli\u003e9 V DC power jack, 80 mA max\u003c\/li\u003e \u003cli\u003eUSB port with USB-MIDI functionality or optional USB Host compatibility\u003c\/li\u003e \u003cli\u003e1\/4″ jack for expression pedal or tap tempo switch\u003c\/li\u003e \u003cli\u003eMultiJack functions as expression pedal input, tap tempo input, tap tempo output, or MIDI output with Disaster Area TRS to MIDI Adaptor Cable, control a single Empress or Chase Bliss device with the appropriate cable.\u003c\/li\u003e \u003cli\u003eOptional side roller assignable to expression or looper level\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990049895,"sku":"60506","price":189.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dmc-3xl-gen3-1_79a34e8c-cd41-49a7-a0b2-e23f2a7fb87d.jpg?v=1787091229"},{"product_id":"disaster-area-designs-dmc-4-gen3","title":"Disaster Area Designs DMC-4 Gen3 - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMC-4 Gen3\u003c\/strong\u003e is the next generation compact MIDI controller from Disaster Area who have added lots of features, connectivity, and capability, making the DMC-3XL Gen3 a next-level upgrade for your pedalboard control needs.\u003c\/p\u003e  \u003ch3\u003eMore MIDI Control\u003c\/h3\u003e  \u003cp\u003eControl up to four MIDI devices plus any combination of Disaster Area pedalboard switching systems.  Note that enabling any of the looper modes will disable control for the fourth MIDI device.\u003c\/p\u003e  \u003ch3\u003eImproved LED Indication and Display\u003c\/h3\u003e  \u003cp\u003eDisaster Area has moved the LEDs to the center of the pedal, putting all of the info you need in one place.  The LEDs now show the bypass \/ engage status of the individual MIDI devices, the looper state, and the clock or tap tempo rate. The display has also been upgraded, and now features full alphanumeric capability.  Both display and LEDs may be dimmed in the setup menu to suit indoor or outdoor venues.\u003c\/p\u003e  \u003ch3\u003eBuilt-in SMARTClock\u003c\/h3\u003e  \u003cp\u003eThe DMC-4 Gen3 adds in support for sending MIDI Clock or tap tempo to your connected devices, without any additional hardware.  Our innovative MultiJack connector can operate as an expression pedal input, tap tempo footswitch input, MIDI output, or isolated tap tempo output.  The DMC-4 Gen2 can send either a global tempo \/ BPM for all presets, or a new tempo \/ BPM for each preset.\u003c\/p\u003e  \u003ch3\u003eUser-Definable CC Command Mode\u003c\/h3\u003e  \u003cp\u003eBased on customer requests, the CC mode that allows the user to define any two commands for the left and right footswitches has been added.  Send one-shot, momentary, or toggle CC messages, MIDI notes, or change banks on your Strymon devices in this handy mode.  (requires firmware v1.01 or higher!)\u003c\/p\u003e  \u003ch3\u003eOptional gHOST Compatiblity\u003c\/h3\u003e  \u003cp\u003eThe DMC-4 Gen3 can control an external USB-MIDI device including the popular Zoom MS-50G, MS-60B, and MS-70CDR using its native USB port.  Connect your USB-MIDI device to the DMC-4 Gen3 USB port through our gHOST adaptor, install the USB HOST firmware, and you’re all set!  The DMC-4 Gen3 can power most USB-MIDI devices, but please note that the power supply you’re using must be sufficient to power the DMC plus the connected device.  Powering a USB device may require as much as 500 mA, so be sure your power supply can handle the load.\u003c\/p\u003e  \u003ch3\u003eSeparate Expression and Roller Configuration\u003c\/h3\u003e  \u003cp\u003eHundreds of players all over the world are in love with the expression rollers on their DMC-4 Gen2 controllers.  It’s a great way to add expression control without giving up valuable pedalboard real estate, but in the Gen2 the roller and expression input are connected so that you can only use one at a time.  In the Gen3, roller has its own input channel, so that you can assign it independently from the expression input.\u003c\/p\u003e  \u003ch3\u003eMultiJack\u003c\/h3\u003e  \u003cp\u003eThe MultiJack has been brought over from the SMARTClock, but has been taught some new tricks!  Now it can function as an expression pedal input, tap tempo footswitch input, or a second MIDI output by connecting the Disaster Area TRS to MIDI Adaptor Cable.  You can use our TRS Control Cable for Chase Bliss Audio to connect your Tonal Recall, Warped Vinyl or other Chase Bliss pedal for full MIDI control.  Want more?  Flip the DIP switches inside the pedal and the MultiJack can act as an isolated tap tempo output to your non-MIDI gear.  Any of the pedals listed over on the TNT or SMARTClock pages can be controlled by the MultiJack.\u003c\/p\u003e  \u003ch3\u003eMIDI Input and Output\u003c\/h3\u003e  \u003cp\u003eThe 5-pin MIDI jack on the DMC-4 operates as a MIDI output, of course, but if you connect the Disaster Area MIDI Y-Cable, you can also send MIDI in to the DMC-4 Gen3.  Want to connect your old DMC Gen2 to your brand new Gen3?  No problem!  How about sending MIDI clock into your chain from a drum machine?  Sure, that’ll work.\u003c\/p\u003e  \u003ch3\u003eEasy Firmware Update\u003c\/h3\u003e  \u003cp\u003eNo more driver installation, app downloads, or weird Windows errors!  Simply hold the mode button and plug in your DMC, and it shows up on your desktop as a flash drive.  Drag and drop the new firmware over and you’re all set!  (Mac folks will have to type three keystrokes, but you can handle that!)  And our new 32-bit processor has more than eight times the available power of the Gen2 family.\u003c\/p\u003e  \u003ch3\u003eWhat can the DMC-4 Gen3 do for me?\u003c\/h3\u003e  \u003cp\u003eIf you have one MIDI device, the DMC-4 Gen3 can simplify selecting programs, send it expression or tap tempo, or even keep it locked in to a MIDI clock.  You can also control the loop recorder \/ looper on several popular devices such as the Strymon Timeline, Eventide H9, and Line 6 M9 \/ M13.\u003c\/p\u003e  \u003cp\u003eAs helpful as the DMC-4 Gen3 is for single device users, it really shines when used with multiple pedals.  Instead of scrolling around on each device to select a program for your next song, the DMC can send simultaneous commands to all of your pedals to select the exact patches you want with a single tap!  Using our Preset Mode, changing sounds on all of your MIDI pedals is as easy as changing the channel on your TV remote.  The DMC-4 Gen3 can control up to four separate devices, or three devices plus a looper.\u003c\/p\u003e  \u003cp\u003eIf you want to change your non-MIDI pedals along with your presets, you can add in one of our DPC-8EZ switching systems.  The DMC-4 Gen3 will seamlessly control the DPC-8EZ, so that one tap will reconfigure your entire pedalboard in milliseconds.\u003c\/p\u003e  \u003cp\u003eAnd by adding our new Clock Mode, they've taken pedalboard control to a new level!  You can select your tempo by BPM, or tap in a new tempo any time.  The DMC-4 Gen3 allows for a global tempo that you can tap in at any time, or preset tempos that change along with your MIDI programs.  You can even configure the MultiJack to send taps to your non-MIDI devices with tap tempo inputs.\u003c\/p\u003e  \u003ch3\u003eWhy should I choose the DMC-4 vs. the DMC-3XL?\u003c\/h3\u003e  \u003cp\u003eThe DMC-4 Gen3 shares a lot of DNA with the 3XL – they even run the same firmware code.  But the DMC-4 has an important added feature – the Hot Switch.  The upper-left button on the DMC-4 may be configured by the user to send tap tempo, control the MIDI clock, activate a Favorite preset, turn on the tuner in your MIDI pedals, or even enable latching “freeze” on your reverb pedal.  You can change the assignment of this button easily, and you’ve even got control over which devices it sends messages to.  Want to only send taps to your delay and not your modulation pedals?  No sweat.\u003c\/p\u003e  \u003ch3\u003eWhat do I need to hook all this stuff up?\u003c\/h3\u003e  \u003cp\u003eYou’ll need one MIDI cable for each device you want to connect to the DMC-4 Gen3.  MIDI is a communication protocol, and a single MIDI cable is capable of sending data to up to 16 different places on separate MIDI channels.  If you want to connect multiple MIDI devices together, you can generally hook the output of the first device (like the DMC) into the input of the second device, then the output of the second device runs into the input of the third device and so on.\u003c\/p\u003e  \u003cp\u003eExceptions to this rule include any device that does not have a MIDI output or thru connector (dead-end device)\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eAlexander Super Radical and Oblivion\u003c\/li\u003e \u003cli\u003eDigitech Whammy 4, 5, DT, Bass Whammy\u003c\/li\u003e \u003cli\u003ePigtronix Infinity\u003c\/li\u003e \u003cli\u003eEHX 8-Step Program\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eAlso, some devices that have a MIDI output do not pass incoming MIDI to it – the big offenders here are the Line 6 M5, M9, and M13.\u003c\/p\u003e  \u003cp\u003eSome devices have a MIDI output \/ thru but do not reliably pass incoming MIDI data – The Eventide Factor series and H9 are like this.\u003c\/p\u003e  \u003cp\u003eIf you have these problematic devices, you can either place them LAST in your MIDI chain, or you can use a MIDI Thru box such as the Disaster Area PBA-MS which will send full MIDI to three separate devices without daisy-chaining them.\u003c\/p\u003e  \u003cp\u003eThe DMC-3XL Gen3 also provides an additional option, by using the Disaster Area TRS to MIDI Adaptor Cable in the MultiJack.  If you’re not using the MultiJack for another purpose, this can get you one additional MIDI output for a dead-end device, and it supports an additional daisy-chain.  In this way, you can have two dead-end devices in your setup, each at the end of its own chain.\u003c\/p\u003e  \u003cp\u003eWant MORE MIDI outputs?  Connect a supported USB MIDI interface to the DMC-3XL Gen3’s USB port using the gHOST Adaptor and you can connect a third dead-end device or device chain.\u003c\/p\u003e  \u003cp\u003eYou can use an Empress MIDIBox to connect up to 4 Chase Bliss Audio or Empress devices.  Chase Bliss pedals use the ring terminal on their jack, so you’ll need to either purchase your MIDIBox modified to work with Chase Bliss, or you can get our inexpensive TRS Control Cable for Chase Bliss Audio.  If you only have one Chase Bliss or Empress device, you can just connect directly to the MultiJack with the appropriate cable.  Empress use a standard mono cable, Chase Bliss need the TRS Control Cable for Chase Bliss Audio.\u003c\/p\u003e  \u003ch3\u003eSupported MIDI Devices\u003c\/h3\u003e  \u003cp\u003eFull MIDI Control Support for the following devices:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eStrymon:  Timeline, Mobius, BigSky\u003c\/li\u003e \u003cli\u003eEventide:  H9, Space, Timefactor, Modfactor, Pitchfactor\u003c\/li\u003e \u003cli\u003eLine 6:  M5, M9, M13\u003c\/li\u003e \u003cli\u003eChase Bliss:  Warped Vinyl, Wombtone, Gravitas, Spectre, Tonal Recall (control up to 4 with an Empress MIDIBox, control a single pedal with our TRS Control Cable for Chase Bliss Audio)\u003c\/li\u003e \u003cli\u003eBoss DD-500 (full support,) SL-20 (clock only)\u003c\/li\u003e \u003cli\u003eElectro-Harmonix HOG2\u003c\/li\u003e \u003cli\u003ePigtronix Echolution 2 \/ Deluxe \/ Ultra\u003c\/li\u003e \u003cli\u003eAlexander:  Super Radical, Oblivion\u003c\/li\u003e \u003cli\u003eEmpress:  Reverb, Tremolo 2 (control up to four Empress devices using Empress MIDIBox, control a single pedal with a mono cable connected to the MultiJack)\u003c\/li\u003e \u003cli\u003ePanda Audio Future Impact I\u003c\/li\u003e \u003cli\u003eFree The Tone:  Flight Time Delay FT-1Y\u003c\/li\u003e \u003cli\u003eSource Audio Neuro Hub \/ Soundblox Hub:  control up to five One Series or Soundblox 2 series pedals from a single MIDI channel.  Control up to 20 (yes, twenty!) Source Audio pedals with a single DMC Gen3!\u003c\/li\u003e \u003cli\u003eDigiTech:  Whammy V, Bass Whammy (newest version) – works with Classic or Chords modes.\u003c\/li\u003e \u003cli\u003eGeneral MIDI:  Supports most MIDI devices, sends program changes 0-127 and MIDI CC for tap tempo, expression, and performance switch controls.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eFeatures and Specifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eSturdy cast aluminum enclosure\u003c\/li\u003e \u003cli\u003eEnclosure Dimensions 4.7″ x 3.7″ x 1.4″\u003c\/li\u003e \u003cli\u003eSoft-touch footswitches\u003c\/li\u003e \u003cli\u003eBlue LED display with 10 brightness levels\u003c\/li\u003e \u003cli\u003e5-pin MIDI port, doubles as MIDI input using the Disaster Area MIDI Y-Cable\u003c\/li\u003e \u003cli\u003e9 V DC power jack, 80 mA max\u003c\/li\u003e \u003cli\u003eUSB port with USB-MIDI functionality or optional USB Host compatibility\u003c\/li\u003e \u003cli\u003e1\/4″ jack for expression pedal or tap tempo switch\u003c\/li\u003e \u003cli\u003eMultiJack functions as expression pedal input, tap tempo input, tap tempo output, or MIDI output with Disaster Area TRS to MIDI Adaptor Cable, control a single Empress or Chase Bliss device with the appropriate cable.\u003c\/li\u003e \u003cli\u003eOptional side roller assignable to expression or looper level\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990115431,"sku":"60508","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dmc-4-gen3-1_d89d6325-2c98-4a78-b180-de52ba03c328.jpg?v=1787091229"},{"product_id":"disaster-area-designs-dmc-8d-midi-foot-controller","title":"Disaster Area Designs DMC-8D - Strymon\/Eventide - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMC-8D\u003c\/strong\u003e is their largest MIDI controller, combining the comprehensive control of the DMC-6D with two extra buttons for tap tempo and a “favorite” preset.  The DMC-8D can fully control up to four connected MIDI devices with preset mapping, tap tempo, expression, bypass, and more.  It offers up to 120 presets that combine patches on all of your MIDI devices, a full looper mode for the Strymon Timeline or Line 6 M9 \/ M13, and preset control of additional devices such as amplifiers or switching systems.  The DMC-8D works seamlessly with the Disaster Area DPC-5, DPC-8EZ, or DPC-4EZ, transforming into a full master controller for your MIDI and non-MIDI devices alike.\u003c\/p\u003e     \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDimensions:  10″ x 2″ x 2.5″\u003c\/li\u003e \u003cli\u003e8-pin DIN MIDI OUT (phantom power compatible)\u003c\/li\u003e \u003cli\u003eUSB MIDI + firmware update\u003c\/li\u003e \u003cli\u003eTwo 1\/4″ expression control input (TRS,) assignable to several destinations including expression and looper level\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990148199,"sku":"60510","price":279.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dmc-8d-1_1a936ad7-a43b-4140-a99f-84c657f69d04.jpg?v=1787091230"},{"product_id":"disaster-area-designs-dmc-6d-midi-foot-controller","title":"Disaster Area Designs DMC-6D - Strymon\/Eventide - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMC-6D\u003c\/strong\u003e is based on the popular DMC-6 platform, reconfigured to work with a variety of computer software.  The DMC-6D is ideal for controlling Ableton Live, Logic Pro, Mainstage, GarageBand, and many other applications.  Any DAW or computer application that is capable of being controlled by MIDI notes or MIDI CC will work with the DMC-6D.\u003c\/p\u003e  \u003cp\u003eThe Universal firmware works with or without a computer, controlling up to four MIDI devices such as the Strymon Timeline, Mobius, and BigSky, the Eventide Factor series, SPACE, and H9, and the Line 6 M-series.\u003c\/p\u003e     \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDimensions:  7.38″ x 4.7″ x 1.3″\u003c\/li\u003e \u003cli\u003e5-pin DIN MIDI OUT\u003c\/li\u003e \u003cli\u003eUSB MIDI + firmware update\u003c\/li\u003e \u003cli\u003eTwo 1\/4″ expression control input (TRS)\u003c\/li\u003e \u003cli\u003eOne 1\/4″ extender switch input (TRS)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990180967,"sku":"60509","price":239.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dmc-6d-1_29b43a44-532d-4fe4-b805-0d64f31889d2.jpg?v=1787091229"},{"product_id":"disaster-area-designs-dpc-8ez-programmable-bypass-switcher","title":"Disaster Area Designs DPC-8EZ Bypass Switcher - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DPC-8EZ\u003c\/strong\u003e is a compact pedalboard control system with eight effects loops and MIDI.  The DPC-8EZ is similar to the popular DPC-5 pedalboard controller but has more effects loops and a simplified MIDI implementation.\u003c\/p\u003e  \u003cp\u003eThe DPC-8EZ is fully compatible with the Disaster Area Gen2 pedal controllers, including the DMC-6D and DMC-7D.  Combining a DPC-8EZ with a DMC-7D allows the player to use the DMC-7D as a powerful preset organizer and MIDI controller, while leaving the DPC-8EZ in direct access mode for quick pedal selection.\u003c\/p\u003e  \u003cp\u003ePlease note that in order to pack the maximum connectivity into the DPC-8EZ, the jack spacing is very tight.  Disaster Area have tested several different brands and types of patch cables and have found DisasterPlugs to be the best solution for cabling up a DPC-8EZ.  36 plugs (3 kits) are required to cable 8 effects and one volume pedal into a DPC-8EZ.  Other options include George L’s and Lava solderless kits, including Mini-ELC and Tightrope kits.  Customers wishing to use soldered connections may use Switchcraft 380 straight plugs.\u003c\/p\u003e  \u003ch3\u003ePreset Mode:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eButton 1-4:  Select a preset.  Tap the current preset for bypass.\u003c\/li\u003e \u003cli\u003eButton 5:  Change preset banks.  Hold to enter direct access mode.\u003c\/li\u003e \u003cli\u003eSpecial Functions:\u003c\/li\u003e \u003cli\u003eButton 1:  Hold for tuner mute\u003c\/li\u003e \u003cli\u003eButton 2:  Hold to select folder 1-4\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eDirect Access Mode:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eButton 1-4:  Select loops 1-4 (blue bank) or loops 5-8 (green bank.)\u003c\/li\u003e \u003cli\u003eButton 5:  Change loop banks (1-4 or 5-8.)  Hold to enter preset mode.\u003c\/li\u003e \u003cli\u003eSpecial Functions:\u003c\/li\u003e \u003cli\u003eButton 1:  Hold for Tuner Mute\u003c\/li\u003e \u003cli\u003eButton 4:  Hold to save the current loop settings to a preset\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eConfiguration Options:\u003c\/h3\u003e  \u003cp\u003eHold Buttons at boot to change settings.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eButtons 1+5:  Factory Reset\u003c\/li\u003e \u003cli\u003eButtons 1+4:  Reset config only (retains presets)\u003c\/li\u003e \u003cli\u003eButtons 1+2:  Firmware Update Mode\u003c\/li\u003e \u003cli\u003eButton 1:  Enable MIDI channel learning \/ autoconfig.  Works with DMC-6D \/ 7D, DPC-5 as master\u003c\/li\u003e \u003cli\u003eButton 2:  Change startup mode.  DPC-8EZ starts in either preset mode or direct access mode\u003c\/li\u003e \u003cli\u003eButton 3:  Enable \/ disable Stereo Link\u003c\/li\u003e \u003cli\u003eButton 4:  Change MIDI output from THRU to MERGE - DPC-8EZ sends program changes in MERGE mode.\u003c\/li\u003e \u003cli\u003eButton 5:  Enable or disable Automatic Noise Reduction - ANR mutes the output while switching to eliminate pops or clicks\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eDPC-8EZ Insert Connector\u003c\/h3\u003e  \u003cp\u003eThe DPC-8EZ Insert allows the controller to function as two separate switching systems with separate audio paths\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eSplit the paths to place loops 1-4 in the preamp of your amp, 5-8 in the effects loop\u003c\/li\u003e \u003cli\u003eSplit the paths to switch effects in two separate amplifiers or signal chains\u003c\/li\u003e \u003cli\u003ePlace a volume pedal after your drive pedals \/ before your modulation and time-based effects\u003c\/li\u003e \u003cli\u003eUse the Stereo Link feature to have the left stereo channel use loops 1-4 and the right stereo channel use loops 5-8\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMIDI Functions\u003c\/h3\u003e  \u003cp\u003eThe DPC-8EZ features a limited but powerful MIDI implementation.  Selecting a preset on the DPC-8EZ will send a MIDI program change message to any other connected MIDI devices (MERGE mode.)  This program sending is fixed per preset, and may be disabled.  If the MIDI sending \/ MERGE is disabled, the MIDI input still acts as a MIDI thru.\u003c\/p\u003e  \u003cp\u003eEach loop on the DPC-8EZ may also be controlled by a MIDI CC (continuous controller) message. The DMC-7D, DMC-6D, and DPC-5 can control the DPC-8EZ as a slave device.  This allows the DMC or DPC-5 to select saved presets on the DPC-8EZ and still pass MIDI control data to any other MIDI pedals on your board. The DPC-8EZ does not support multiple MIDI channel control or program mapping like the DPC-5 or DMC-6D \/ DMC-7D.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990213735,"sku":"60511","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dpc-8ez-1.jpg?v=1787091230"},{"product_id":"disaster-area-designs-dvc-18-micro-voltage-converter","title":"Disaster Area Designs DVC-18 Micro Voltage Converter","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Deisgns DVC-18\u003c\/strong\u003e is a micro-sized voltage converter unit.\u003c\/p\u003e  \u003cp\u003eSimply plug a 9 V power source into the input, and the DVC-18 will output up to 100 mA of clean 18 V power.  Many pedals are compatible with an 18 V power supply, in some cases the higher voltage results in greater headroom or more total volume output.\u003c\/p\u003e  \u003cp\u003eConsult with the manufacturer for each pedal you wish to power with the DVC-18, Disaster Area Designs will not be held liable for any damage that may result from an overvoltage condition.\u003c\/p\u003e  \u003cp\u003eThe DVC-18 normally doubles the input voltage.  A 9 V input will result in an 18V output, while a 12 V input will produce a 24 V output.\u003c\/p\u003e  \u003cp\u003eThe DVC-18 is also available with a lower-voltage regulated output (12 V or 15 V versions.)  The lower voltage versions should be run on a 9 V input only.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990312039,"sku":"60517","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dcv-18-1_3b8f05fe-7f45-4aa8-88cf-9c866041da21.jpg?v=1787091230"},{"product_id":"disaster-area-designs-dmt-3-triple-tap-tempo-footswitch","title":"Disaster Area Designs DMT-3 Triple Tap Tempo Footswitch","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMT-3\u003c\/strong\u003e is an extremely compact footswitch designed to send taps to up to three compatible devices.\u003c\/p\u003e     \u003ch3\u003eCompatibility:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eStrymon version – Timeline, Mobius, BigSky, Flint.\u003c\/li\u003e \u003cli\u003eBoss \/ NC version – DD-5, DD-7, DD-20, RC-2, more.\u003c\/li\u003e \u003cli\u003eMost other pedals use the standard version, including:\u003c\/li\u003e \u003cli\u003eJHS – Panther, Panther Cub\u003c\/li\u003e \u003cli\u003eEventide – H9, Timefactor, Modfactor, Pitchfactor, Space\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990246503,"sku":"60516","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dmt-3-1_aca9232a-b9f2-46f2-9dfc-b93707ce963c.jpg?v=1787091230"},{"product_id":"disaster-area-designs-dmt-1-micro-tap-tempo","title":"Disaster Area Designs DMT-1 Micro Tap Tempo - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMT-1\u003c\/strong\u003e is an extremely compact footswitch designed to add tap tempo functionality to Disaster Area controllers.  It also works with a variety of other tap tempo compatible devices.\u003c\/p\u003e     \u003ch3\u003eCompatibility:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eStrymon version – Timeline, Mobius, BigSky, Flint.\u003c\/li\u003e \u003cli\u003eBoss \/ NC version – DD-5, DD-7, DD-20, RC-2, more.\u003c\/li\u003e \u003cli\u003eMost other pedals use the standard version, including:\u003c\/li\u003e \u003cli\u003eJHS – Panther, Panther Cub\u003c\/li\u003e \u003cli\u003eEventide – H9, Timefactor, Modfactor, Pitchfactor, Space\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990279271,"sku":"60515","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dmt-1-1_d6addc6d-74a7-4cbf-a73c-7da2ba40043c.jpg?v=1787091229"},{"product_id":"disaster-area-designs-ghost-converter-usb-midi-host","title":"Disaster Area Designs gHOST Converter USB MIDI Host","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area gHOST Converter\u003c\/strong\u003e is an innovative interface that connects class-compliant USB MIDI devices to a hardware 5-pin DIN MIDI interface.  Any MIDI device that is supported without drivers should connect to the USB Host port on the gHOST Converter, which then provides 5-pin MIDI input and output connectors.\u003c\/p\u003e  \u003cp\u003eThe gHOST Converter is compatible with multiple USB devices if connected via a powered hub.  The gHOST Converter directs incoming MIDI traffic on channels 1-4 to hub devices 1-4.  If no hub is present, all incoming and outgoing data will be sent to the USB device.  USB channel assignments are editable using MIDI CC commands.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990344807,"sku":"60512","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-designs-ghost-converter_60512_1_a83ef724-4898-4fad-858e-9779e2c38b23.jpg?v=1787091230"},{"product_id":"disaster-area-designs-r2r-dual-remote-footswitch","title":"Disaster Area Designs R2R Dual Remote Footswitch - Blue","description":"\u003cp\u003eThe \u003cstrong\u003eDiaster Area Designs R2R Dual Remote\u003c\/strong\u003e works with the DPC-5 (requires firmware v1.11+) to allow tap tempo and preset bank select functionality.  The R2R is entirely passive and connects to the DPC-5 with a TRS cable.\u003c\/p\u003e  \u003cp\u003eThe R2R may be ordered with both footswitches set at equal height for horizontal placement, or with the footswitches staggered for vertical placement.  The footswitches may be moved by the user if desired.\u003c\/p\u003e  \u003cp\u003eIncludes 17″ (430 mm) right-angle TRS cable for connecting to the DPC-5 (random color choice)\u003c\/p\u003e  \u003ch3\u003eConnection and Configuration:\u003c\/h3\u003e  \u003cp\u003eConnect the R2R to the DPC-5 Expression Pedal input (red jack closest to the DPC-5 DC power jack.) Power-on the DPC-5 while holding B6 to enter configuration mode. Release B6 to switch to expression config mode. Tap B3 until the Green, Yellow, and Blue LEDs above B3 are all lit.  This will enable the expression pedal input in Tap \/ R2R mode. Press-hold B6 to save the configuration.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990410343,"sku":"60518","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-r2r-1_84549452-b5b2-40d3-90e8-92ced2299aa9.jpg?v=1787091231"},{"product_id":"disaster-area-designs-smartclock-tap-tempo-controller","title":"Disaster Area Designs SMARTClock Tap Tempo - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs SMARTClock\u003c\/strong\u003e is an intelligent tap tempo and clock source for your pedalboard.  The SMARTClock sends both MIDI clock and analog tap tempo signals to a variety of pedalboard devices.\u003c\/p\u003e  \u003cp\u003eThe SMARTClock is simple to use – just tap the footswitch and all your gear will synchronize to its internal clock.  The SMARTClock has two performance modes, selectable by pressing and holding the knob.\u003c\/p\u003e  \u003cp\u003eIn the Tap Tempo mode, the clock is set by either turning the knob or tapping the footswitch.  Tap the knob to set the Tempo Output subdivisions, then hold the footswitch to save the tempo to the current preset if desired.\u003c\/p\u003e  \u003cp\u003eIn Preset Mode, the clock rate is set automatically based on the tempos saved in the SMARTClock memory.  Tap the footswitch to move to the next preset, or to start the clock if the clock is currently stopped.  Hold the footswitch to stop the clock.  Turning the knob selects a new preset.\u003c\/p\u003e  \u003cp\u003eThe innovative Multi-Jack can function as either a dedicated remote tap tempo input jack, third Tempo Output (requires PTP adaptor,) or a second MIDI output.  The Multi-Jack can communicate directly with the Chase Bliss (Wombtone, Warped Vinyl, Gravitas) and Empress (Tremolo 2 and Phaser ) pedals using an appropriate TRS cable.  The Disaster Area TRS to MIDI cable is required to use the MultiJack as a standard MIDI output.\u003c\/p\u003e  \u003cp\u003eThe Multi-Jack may be used as a MIDI Clock Filter – set the JACK configuration to nCLK and it passes through all MIDI information except for MIDI Clock.  This configuration prevents the clock from changing the pre-delay on the Strymon BigSky.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990443111,"sku":"60514","price":179.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-smartclock-1_0c64abbb-1899-43c9-b968-a3d8ece9fc5c.jpg?v=1787091230"},{"product_id":"disaster-area-designs-smartswitch-2-midi-channel-switcher","title":"Disaster Area Designs SMARTSwitch 2 - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs SMARTSwitch 2\u003c\/strong\u003e is a compact MIDI controlled channel and remote switch.  Two isolated 1\/4″ mono jacks connect to your gear, and the SMARTPedal interface allows for full real-time control or direct MIDI access.  The SMARTSwitch 2 can change your amp channels in response to incoming MIDI Continuous Controller (CC) or Program Change (PC) messages on any MIDI channel.\u003c\/p\u003e  \u003cp\u003eConnecting the SMARTSwitch 2 to your amp requires either a single TRS 1\/4″ cable or two TS \/ mono cables.  Each output is fully isolated so that two separate amps may be controlled with the same SMARTSwitch.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990475879,"sku":"60513","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-smartswitch-1_eef90474-8cd0-4201-8308-41dfdb5ad5c3.jpg?v=1787091230"},{"product_id":"disaster-area-designs-tnt-triple-output-tap-and-favorite","title":"Disaster Area Designs TNT - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area TNT Triple Output Tap and Favorite Footswitch\u003c\/strong\u003e is Disaster Area's advanced tap tempo foot switch with integrated favorite \/ toggle functionality.\u003c\/p\u003e  \u003cp\u003eThe TNT is simple to use:  Just tap it to send taps to your connected devices, or hold it to toggle between states.  The TNT may be used to control up to three different tap tempo devices, or as a master favorite switch for up to three devices, or any combination.  Each output is isolated and designed to eliminate crosstalk and prevent ground loops between your devices.  No other foot switch comes close to the explosive power of the TNT.\u003c\/p\u003e     \u003ch3\u003eCompatibility:\u003c\/h3\u003e  \u003cp\u003eThe TNT is compatible with virtually every pedal or effects unit equipped with a remote tap tempo input jack.  In favorite \/ toggle mode, the TNT can work as a “fixed expression” control with many devices.  Please note that some devices may require the use of a TRS \/ stereo cable or to have the TNT’s pull-up resistors enabled for certain functions.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eAlexander – Tap:  History Lesson, Super Radical, Oblivion\u003c\/li\u003e \u003cli\u003eAlexander – Favorite:  Super Radical, Oblivion\u003c\/li\u003e \u003cli\u003eBOSS  – Tap \/ OUTPUT C ONLY DD-5, DD-7, DD-20, RE-20 (requires connected output set to normally closed)\u003c\/li\u003e \u003cli\u003eCatalinbread – Semaphore\u003c\/li\u003e \u003cli\u003eChase Bliss – All pedals\u003c\/li\u003e \u003cli\u003eCusack – Tap-A-Whirl, Tap-A-Delay, Tap-A-Phase, Tap-A-Scream, more.  (requires 1\/4″ to RCA cable)\u003c\/li\u003e \u003cli\u003eDisaster Area – All controllers with expression input, DMC-6D expander jack input (with TRS cable.)\u003c\/li\u003e \u003cli\u003eElectro-Harmonix – Tap: Deluxe Memory Man with Tap 1100 \/ 550, Super Pulsar\u003c\/li\u003e \u003cli\u003eElectro-Harmonix – Expression:  HOG2, Pitch Fork, Cock Fight, more\u003c\/li\u003e \u003cli\u003eEventide – H9, Timefactor, Modfactor, Pitchfactor, Space\u003c\/li\u003e \u003cli\u003eJHS – Panther, Panther Cub, Emperor, Unicorn\u003c\/li\u003e \u003cli\u003eLine 6 – Favorite \/ Expression:  AM-4, DL-4, DM-4, MM-4, M5, M9, M13.  Not compatible for tap tempo with Line 6.\u003c\/li\u003e \u003cli\u003eMatthews Effects – Conductor\u003c\/li\u003e \u003cli\u003eStrymon  – Tap:  Timeline, Mobius, BigSky, Flint, Deco, Dig\u003c\/li\u003e \u003cli\u003eStrymon  – Favorite:   Brigadier, Deco, DIG, El Capistan, Flint, Lex\u003c\/li\u003e \u003cli\u003eWalrus Audio – Tap:  Bellwether\u003c\/li\u003e \u003cli\u003eWalrus Audio – *Favorite:  Vanguard, Descent (use expression pedal input)\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eConfiguration:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePress and hold the power switch at boot to cycle through switch configurations.\u003c\/li\u003e \u003cli\u003eThe LED will light for 1 second, then blink ON to indicate the outputs set to Toggle \/ Favorite.\u003c\/li\u003e \u003cli\u003eHolding the footswitch at boot will cause one more output to be set to Toggle each time.\u003c\/li\u003e \u003cli\u003eAfter all three outputs are set to Toggle, the unit will switch over to “NC” \/ Boss mode.  In this mode, the output closest to the DC power jack will be reversed polarity in order to work with Boss pedals such as the DD-5, DD-7, and DD-20.  In NC mode, the LED will stay lit and blink OFF to indicate the Toggle outputs.\u003c\/li\u003e \u003cli\u003eOnce all three outputs are set to Toggle in “NC” mode, the unit will reset to normal mode with no Toggles enabled.\u003c\/li\u003e \u003cli\u003eThe TNT remembers your last setting when powered off.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44449990508647,"sku":"60519","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-tnt-1_c4d928a6-cc2f-4dec-abd9-777c1a48d3c5.jpg?v=1787091230"},{"product_id":"disaster-area-solderless-cable-pedalboard-kit","title":"Disaster Area Solderless Cable Pedalboard Kit","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Solderless Cable Pedalboard Kit\u003c\/strong\u003e DisasterPlugs are an ultra-low profile solderless cable system, making them the ideal choice for your jam-packed pedalboard or rack system. They’re easy to assemble, don’t require any tedious stripping and work as either a straight or right-angle cable that can be changed at any time. Just insert the cable into the opening on the DisasterPlug and then tighten the ground screw with the included driver — it’s that easy.  DisasterPlugs are made in the USA by G\u0026amp;H, a leader in the audio connector industry.\u003c\/p\u003e  \u003cp\u003eOf course, a pedalboard cable system is only as good as its cable — and DisasterPlugs deliver. The low-capacitance cable won’t load down your guitar signal and is made in the USA to exacting specifications. The cable measures 0.150″ \/ 3.85 mm in diameter for ultra-tidy cable routing.  It features an oxygen-free copper core for excellent signal transfer and a conductive inner shield to reduce microphonics.\u003c\/p\u003e  \u003cp\u003eDisaster Area cable kits are small, they work well, and they’re designed to be easily assembled and reassembled any time you need to make a change — without tearing up your thumbs.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450009907303,"sku":"62445","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-cable-kit_62445_1_199881fc-43e9-4266-8638-a604a5023883.jpg?v=1787091311"},{"product_id":"disaster-area-designs-dpc-5-gen3-black","title":"Disaster Area Designs DPC-5 Gen3 - Black","description":"\u003cp\u003eYes.  It’s back.  Our original pedalboard controller, now with way more cool stuff.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DPC-5 Gen3\u003c\/strong\u003e was Disaster Area's first foray into the loop-switching field way back in 2012.  They discontinued it in early 2016 when some of the parts required to build them became too expensive.  They have been hard at work bringing the DMC Gen3 series to life, but have never forgot about the DPC-5!\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhat does it do? The DPC-5 is a compact MIDI controller and loop switcher.  It’s designed to control a mix of MIDI and non-MIDI pedals in your rig, allowing you to craft presets that you can engage instantly when you need them.  A single tap on your DPC-5 can turn up to five non-MIDI pedals on or off, send tap tempo to a delay or other device, change the channel on your amplifier, and switch programs on up to four MIDI devices.  That’s a lot of power in a small footprint!\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450066006119,"sku":"72220","price":399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dpc-5-gen3_72220_1_5574851b-4e12-4ef1-91d8-b2262161a6fd.jpg?v=1787091547"},{"product_id":"disaster-area-designs-smartclock-gen3-tap-tempo-controller","title":"Disaster Area Designs SMARTClock Gen3 Tap Tempo Controller - White","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area SMARTClock Gen3\u003c\/strong\u003e is an intelligent tap tempo and clock source for your pedalboard.  Synchronize up to four separate tap-tempo pedals plus multiple MIDI-clock capable units.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe SMARTClock Gen3 is simple to use – just tap the footswitch and all your gear will synchronize to its internal clock. Don’t feel like tapping in the time?  Spin the illuminated knob to set the tempo in 1.0 or 0.5 BPM increments for more precise adjustments. Tap the knob to view or change the subdivisions or output settings for each jack, then hold the knob to save the current settings to a preset.\u003c\/p\u003e\r\n\r\n\u003cp\u003eHold the footswitch down to advance to the next preset.  You can even set the number of accessible presets so that you only use what you need. Each tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the 4 outputs. You can also set the SMARTClock to send a MIDI Program Change to an external MIDI device.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450224078951,"sku":"94935","price":165.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-smartclock-gen3_94935_1_1b7e262a-158c-4a25-95f2-300e656c0168.jpg?v=1787092199"},{"product_id":"disaster-area-designs-smartclock-gen3-tap-tempo-black","title":"Disaster Area Designs SMARTClock Gen3 Tap Tempo - Black","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area SMARTClock Gen3\u003c\/strong\u003e is an intelligent tap tempo and clock source for your pedalboard. Synchronize up to four separate tap-tempo pedals plus multiple MIDI-clock capable units.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe SMARTClock Gen3 is simple to use – just tap the footswitch and all your gear will synchronize to its internal clock. Don’t feel like tapping in the time? Spin the illuminated knob to set the tempo in 1.0 or 0.5 BPM increments for more precise adjustments. Tap the knob to view or change the subdivisions or output settings for each jack, then hold the knob to save the current settings to a preset.\u003c\/p\u003e\r\n\r\n\u003cp\u003eHold the footswitch down to advance to the next preset. You can even set the number of accessible presets so that you only use what you need. Each tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the 4 outputs. You can also set the SMARTClock to send a MIDI Program Change to an external MIDI device.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450285781095,"sku":"101566","price":165.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-smartclock-gen3_101566_1_c108917b-0686-446b-aa06-b9a01538dbe9.jpg?v=1787092457"},{"product_id":"disaster-area-pba-4-dual-junction-box","title":"Disaster Area Designs PBA-4 Dual Junction Box","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs PBA-4\u003c\/strong\u003e is small enough to mount underneath the angle of most Pedaltrain boards (including PT-Jr, PT-1 \/ 2 \/ 3, PT-Pro, PT Novo series, and PT Classic series) to allow for a convenient input or output point.\u003c\/p\u003e\r\n\u003cp\u003eThe standard version has each pair of jacks wired together in parallel.\u003c\/p\u003e\r\n\u003cp\u003eConnect two pedalboard patch cables between your first and last pedals and the PBA-4, and then you can plug in your instrument cables directly to your board saving valuable setup time.\u003c\/p\u003e\r\n\u003cp\u003eUse a single PBA-4 as both input and output points for your board, or use the PBA-4 as a stereo output junction. Both tip and ring connectors are wired through on the PBA-4, so it can also serve as a connection for expression pedals or stereo patch cables.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450936684647,"sku":"82967","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-pba-4_82967_1_4613fbc6-cf68-4ea7-a7f4-b099063498ab.jpg?v=1787095172"},{"product_id":"disaster-area-designs-micro-clock","title":"Disaster Area Designs micro.CLOCK MIDI Tap Tempo and Clock Source","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs micro.CLOCK\u003c\/strong\u003e leverages Disaster Area's advanced SMARTClock technology in a tiny package – just 3.6″ x 1.5″ x 1.6″ (93 x 38 x 42 mm) Tap the footswitch to set the master clock tempo. The micro.CLOCK will then send taps to your devices to lock them in to your music. Selectable subdivisions let you tap in quarter-notes and set your devices to dotted-eighths, eight-notes, or triplets! Tap the knob to view or change the subdivisions or output settings for each output, then hold the knob to save the current settings to a preset. Hold the footswitch down to advance to the next preset. You can even set the number of accessible presets so that you only use what you need.\u003c\/p\u003e\r\n\u003cp\u003eEach tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the three outputs. You can also set the micro.CLOCK to send a MIDI Program Change to an external MIDI device.\u003c\/p\u003e\r\n\u003cp\u003eHave a pedal that needs an odd or unusual configuration for tempo control? The micro.CLOCK works with devices that accept a normally-open or normally-closed footswitch, and can even send 0-3.3V control voltage that works with pedals with expression control of delay \/ tempo. Check with your pedal builder for details on their expression options!\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eCOMPATABILITY:\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eTAP OUTPUTS\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe micro.CLOCK Gen3 is compatible with virtually every pedal or effects unit equipped with a remote tap tempo input jack. In toggle mode, the micro.CLOCK outputs can work as a “fixed expression” control with many devices. Please note that some devices may require the use of a TRS \/ stereo cable or to have the micro.CLOCK pull-up resistors enabled for certain functions.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAlexander – Tap: History Lesson, Super Radical, Oblivion, Radical Delay ][+, Chesapeake, Equilibrium DLX, Quadrant, Colour Theory, Wavelength\u003c\/li\u003e\r\n\u003cli\u003eAlexander – Favorite: Super Radical, Oblivion, Radical Delay ][+, History Lesson, All Neo Series pedals\u003c\/li\u003e\r\n\u003cli\u003eBOSS – Tap DD-500, RV-500, MD-500, SY-300, DD-5, DD-7, DD-20, PH-3, AW-3 (requires connected output set to normally closed.)\u003c\/li\u003e\r\n\u003cli\u003eCatalinbread – Semaphore, Belle Epoch Deluxe (uses Control Voltage mode)\u003c\/li\u003e\r\n\u003cli\u003eChase Bliss – Tap All pedals except Brothers, Dark World\u003c\/li\u003e\r\n\u003cli\u003eChase Bliss – Favorite All pedals\u003c\/li\u003e\r\n\u003cli\u003eCusack – Tap-A-Whirl, Tap-A-Delay, Tap-A-Phase, Tap-A-Scream, more. (requires 1\/4″ to RCA cable)\u003c\/li\u003e\r\n\u003cli\u003eDisaster Area – Gen2 (DMC-3XL, DMC-4, DMC-6D, DMC-8D, DMC-7, DMC-6L, DPC-5) and Gen3 (DMC-3XL, DMC-4, DMC-6, DMC-8, DPC-5, NNB)\u003c\/li\u003e\r\n\u003cli\u003eElectro-Harmonix – Tap: Deluxe Memory Man with Tap 1100 \/ 550, Super Pulsar\u003c\/li\u003e\r\n\u003cli\u003eElectro-Harmonix – Expression: HOG2, Pitch Fork, Cock Fight, more\u003c\/li\u003e\r\n\u003cli\u003eEventide – H9, Timefactor, Modfactor, Pitchfactor, Space\u003c\/li\u003e\r\n\u003cli\u003eJHS – Panther, Panther Cub, Emperor, Unicorn, Pink Panther\u003c\/li\u003e\r\n\u003cli\u003eLine 6 – Favorite \/ Expression: AM-4, DL-4, DM-4, MM-4, M5, M9, M13. Not compatible for tap tempo with Line 6.\u003c\/li\u003e\r\n\u003cli\u003eMatthews Effects – Conductor\u003c\/li\u003e\r\n\u003cli\u003eMXR – Echoplex Delay, Carbon Copy Deluxe\u003c\/li\u003e\r\n\u003cli\u003eStrymon – Tap: Timeline, Mobius, BigSky, Flint, Deco, Dig\u003c\/li\u003e\r\n\u003cli\u003eStrymon – Favorite: Brigadier, Deco, DIG, El Capistan, Flint, Lex, Riverside, Sunset\u003c\/li\u003e\r\n\u003cli\u003eWalrus Audio – Tap: Bellwether, ARP-87\u003c\/li\u003e\r\n\u003cli\u003eWalrus Audio – *Favorite: Vanguard, Descent (use expression pedal input)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eMIDI CLOCK\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePlease note that the micro.CLOCK requires the use of an adapter cable for MIDI input and output.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAlexander – Oblivion, Super Radical, Quadrant, Colour Theory, Wavelength\u003c\/li\u003e\r\n\u003cli\u003eBoss – DD-500, SL-20 Slicer\u003c\/li\u003e\r\n\u003cli\u003eChase Bliss – All pedals except Brothers and Condor\u003c\/li\u003e\r\n\u003cli\u003eEmpress – Echosystem, Reverb, Tremolo2, Phaser\u003c\/li\u003e\r\n\u003cli\u003eEventide – H9, Timefactor, Modfactor, Pitchfactor, Space\u003c\/li\u003e\r\n\u003cli\u003eElectro-Harmonix – 8-Step Program\u003c\/li\u003e\r\n\u003cli\u003eLine 6 – M5, M9, M13, more\u003c\/li\u003e\r\n\u003cli\u003eMeris – OttoBit Jr., Polymoon\u003c\/li\u003e\r\n\u003cli\u003eMoog – MF-104M Delay, MF-104MSD Super Delay, MF-105M MIDI MurF, MF-108M Cluster Flux\u003c\/li\u003e\r\n\u003cli\u003ePigtronix – Echolution 2 (including Deluxe and Filter \/ Filter Pro,) Infinity\u003c\/li\u003e\r\n\u003cli\u003eSource Audio – Orbital, Manta, Stingray, Gemini, Lunar, Mercury (All require use of Soundblox or Neuro Hub,) Nemesis Delay, Reflex\u003c\/li\u003e\r\n\u003cli\u003eStrymon – Timeline, Mobius, BigSky\u003c\/li\u003e\r\n\u003cli\u003eTC Electronic – Flashback X4, Alter Ego X4, Flashback Triple Delay, Ditto X4,\u003c\/li\u003e\r\n\u003cli\u003eZ-Vex – Super Seek-Trem, Super Ringtone, Super Seek-Wah\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450938585191,"sku":"193595","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-micro-clock_193595_1_3e81356e-a61a-4c73-8f89-dd998fdf65c4.jpg?v=1787095179"},{"product_id":"disaster-area-designs-dpc-micro","title":"Disaster Area Designs DPC.micro MIDI Controller Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DPC.micro MIDI Controller Pedal\u003c\/strong\u003e is Disaster Area's most compact loop switching controller, with three true bypass loops in a standard 125B enclosure. The DPC.micro works as a standalone device, to switch three separate pedals or signal chains, or as a MIDI-controlled loop expander for your rig. Each loop may be controlled using a MIDI CC message or program change message, and the DPC.micro can store up to 120 preset combinations for instant recall over MIDI.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFull MIDI implementation - activate loops with MIDI CC or PC messages\u003c\/li\u003e\r\n\u003cli\u003eEach loop LED is configurable for color and brightness\u003c\/li\u003e\r\n\u003cli\u003eManual mode selects one loop at a time\u003c\/li\u003e\r\n\u003cli\u003ePreset mode selects multiple loops at once\u003c\/li\u003e\r\n\u003cli\u003eOptional pop-stopping function\u003c\/li\u003e\r\n\u003cli\u003eNo buffer or signal conditioning - works great with impedance-sensitive pedals like fuzz, wah, vibe, and more\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eIf you already have a MIDI controller, the DPC.micro can act as a MIDI “slave” on any available channel. You can even connect up to four DPC.micro to create your own modular switching rig.\u003c\/p\u003e\r\n\u003cp\u003eThe DPC.micro is fully compatible with the Disaster Area Gen3 pedal controllers – connect it to add three effects loops under MIDI control.\u003c\/p\u003e\r\n\u003cp\u003eDo you have a MIDI-capable multi-effects unit like the Line 6 Helix \/ Helix LT \/ HX Effects, or Fractal AX8? The DPC.micro can interface directly with your rig to add up to three independently controllable loops for your non-MIDI pedals! Combine your favorite analog distortion, compression, modulation, and delay pedals with the digital sounds from your other gear, without giving up your control and flexibility.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450938617959,"sku":"193594","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-designs-dmc-micro_193594_1_58f98fbd-fc69-4e46-9756-22052649cb05.jpg?v=1787095179"},{"product_id":"disaster-area-designs-dmc-micro-pro","title":"Disaster Area Designs DMC.micro PRO MIDI Controller Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMC.micro PRO\u003c\/strong\u003e uses Disaster Area's advanced Gen3 technology in a tiny package – just 3.6\" x 1.5\" x 1.6\" (93 x 38 x 42 mm) The DMC.micro user interface is incredibly simple – tap the left or right buttons to perfor m an action, hold the left button to perform a third \"alternate\" action, or hold the right button to advance to the next \"page.\" The DMC.micro PRO can access up to eight pages, whose functions may include:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDevice Control: Program select and bypass for up to four devices\u003c\/li\u003e\r\n\u003cli\u003eUtility Mode X: User-set actions on left \/ right \/ alt buttons\u003c\/li\u003e\r\n\u003cli\u003eUtility Mode Y: User-set actions on left \/ right \/ alt buttons This mode is also assignable to looper controls for the Strymon Timeline, Eventide H9 \/ Timefactor, or Line 6 M9\/M13\u003c\/li\u003e\r\n\u003cli\u003ePreset: Stores programs from Device Control pages and allows the user to change multiple devices at once\u003c\/li\u003e\r\n\u003cli\u003eClock: Control the DMC.micro PRO’s built-in MIDI clock generator\u003c\/li\u003e\r\n\u003cli\u003eWeb-based editor: Completely configure the entire controller, set preset names, re-order presets, import and export controller settings\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe DMC.micro PRO also features Disaster Area's astounding MultiJack connector, which can perform several different functions to simplify your setup:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConnect one or two 1\/4\" MIDI devices from companies such as Alexander Pedals, Chase Bliss Audio, Empress, and Meris\u003c\/li\u003e\r\n\u003cli\u003eFunctions as a bi-directional MIDI port for supported devices, allows connections for Meris pedals to editing software\u003c\/li\u003e\r\n\u003cli\u003eConnect an expression pedal to send MIDI messages to one or more of your devices, or user-define a custom MIDI CC expression command\u003c\/li\u003e\r\n\u003cli\u003eConnect an external one- or two-button footswitch for tap tempo control, or user-define two custom actions\u003c\/li\u003e\r\n\u003cli\u003eSend tap tempo to an external device such as a DD-7, Panther Cub, Flint, and more\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eNeed more control? Use the USB port to interface with your computer or tablet device and turn the DMC.micro into a USB MIDI controller. Maybe you have a Zoom MultiStomp (MS-50G \/ MS-60B \/ MS-70CDR?) or a newer Red Panda pedal? Connect it to the USB port using the gHOST Adapter to control it with MIDI!\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44450938650727,"sku":"193596","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-designs-dmc-micro-pro_193596_1_c1826ecd-493a-4850-86eb-93a9ac30c4ca.jpg?v=1787095179"},{"product_id":"disaster-area-designs-dpc-8ez-programmable-bypass-switcher-demo-deal-open-box","title":"Disaster Area Designs DPC-8EZ Bypass Switcher - Black (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DPC-8EZ\u003c\/strong\u003e is a compact pedalboard control system with eight effects loops and MIDI.  The DPC-8EZ is similar to the popular DPC-5 pedalboard controller but has more effects loops and a simplified MIDI implementation.\u003c\/p\u003e  \u003cp\u003eThe DPC-8EZ is fully compatible with the Disaster Area Gen2 pedal controllers, including the DMC-6D and DMC-7D.  Combining a DPC-8EZ with a DMC-7D allows the player to use the DMC-7D as a powerful preset organizer and MIDI controller, while leaving the DPC-8EZ in direct access mode for quick pedal selection.\u003c\/p\u003e  \u003cp\u003ePlease note that in order to pack the maximum connectivity into the DPC-8EZ, the jack spacing is very tight.  Disaster Area have tested several different brands and types of patch cables and have found DisasterPlugs to be the best solution for cabling up a DPC-8EZ.  36 plugs (3 kits) are required to cable 8 effects and one volume pedal into a DPC-8EZ.  Other options include George L’s and Lava solderless kits, including Mini-ELC and Tightrope kits.  Customers wishing to use soldered connections may use Switchcraft 380 straight plugs.\u003c\/p\u003e  \u003ch3\u003ePreset Mode:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eButton 1-4:  Select a preset.  Tap the current preset for bypass.\u003c\/li\u003e \u003cli\u003eButton 5:  Change preset banks.  Hold to enter direct access mode.\u003c\/li\u003e \u003cli\u003eSpecial Functions:\u003c\/li\u003e \u003cli\u003eButton 1:  Hold for tuner mute\u003c\/li\u003e \u003cli\u003eButton 2:  Hold to select folder 1-4\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eDirect Access Mode:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eButton 1-4:  Select loops 1-4 (blue bank) or loops 5-8 (green bank.)\u003c\/li\u003e \u003cli\u003eButton 5:  Change loop banks (1-4 or 5-8.)  Hold to enter preset mode.\u003c\/li\u003e \u003cli\u003eSpecial Functions:\u003c\/li\u003e \u003cli\u003eButton 1:  Hold for Tuner Mute\u003c\/li\u003e \u003cli\u003eButton 4:  Hold to save the current loop settings to a preset\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eConfiguration Options:\u003c\/h3\u003e  \u003cp\u003eHold Buttons at boot to change settings.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eButtons 1+5:  Factory Reset\u003c\/li\u003e \u003cli\u003eButtons 1+4:  Reset config only (retains presets)\u003c\/li\u003e \u003cli\u003eButtons 1+2:  Firmware Update Mode\u003c\/li\u003e \u003cli\u003eButton 1:  Enable MIDI channel learning \/ autoconfig.  Works with DMC-6D \/ 7D, DPC-5 as master\u003c\/li\u003e \u003cli\u003eButton 2:  Change startup mode.  DPC-8EZ starts in either preset mode or direct access mode\u003c\/li\u003e \u003cli\u003eButton 3:  Enable \/ disable Stereo Link\u003c\/li\u003e \u003cli\u003eButton 4:  Change MIDI output from THRU to MERGE - DPC-8EZ sends program changes in MERGE mode.\u003c\/li\u003e \u003cli\u003eButton 5:  Enable or disable Automatic Noise Reduction - ANR mutes the output while switching to eliminate pops or clicks\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eDPC-8EZ Insert Connector\u003c\/h3\u003e  \u003cp\u003eThe DPC-8EZ Insert allows the controller to function as two separate switching systems with separate audio paths\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eSplit the paths to place loops 1-4 in the preamp of your amp, 5-8 in the effects loop\u003c\/li\u003e \u003cli\u003eSplit the paths to switch effects in two separate amplifiers or signal chains\u003c\/li\u003e \u003cli\u003ePlace a volume pedal after your drive pedals \/ before your modulation and time-based effects\u003c\/li\u003e \u003cli\u003eUse the Stereo Link feature to have the left stereo channel use loops 1-4 and the right stereo channel use loops 5-8\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMIDI Functions\u003c\/h3\u003e  \u003cp\u003eThe DPC-8EZ features a limited but powerful MIDI implementation.  Selecting a preset on the DPC-8EZ will send a MIDI program change message to any other connected MIDI devices (MERGE mode.)  This program sending is fixed per preset, and may be disabled.  If the MIDI sending \/ MERGE is disabled, the MIDI input still acts as a MIDI thru.\u003c\/p\u003e  \u003cp\u003eEach loop on the DPC-8EZ may also be controlled by a MIDI CC (continuous controller) message. The DMC-7D, DMC-6D, and DPC-5 can control the DPC-8EZ as a slave device.  This allows the DMC or DPC-5 to select saved presets on the DPC-8EZ and still pass MIDI control data to any other MIDI pedals on your board. The DPC-8EZ does not support multiple MIDI channel control or program mapping like the DPC-5 or DMC-6D \/ DMC-7D.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44451110748263,"sku":"456384","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-dpc-8ez-1_74082fca-a30d-466e-b1db-2baff1165940.jpg?v=1787095880"},{"product_id":"disaster-area-designs-dmc-micro-gen4-midi-controller-pedal","title":"Disaster Area Designs DMC.micro Gen4 MIDI Controller Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DMC.micro Gen4\u003c\/strong\u003e is the first in a new generation of MIDI controllers. Featuring all of the features of the previous DMC.micro Pro and DMC.micro Classic, with a vastly improved USB controller and a dual-core 32-bit processor, the DMC.micro Gen4 is maximum MIDI in a minimum footprint. The DMC.micro Gen4 uses Disaster Area's advanced MIDI technology in a tiny package – just 3.6 x 1.5 x 1.6\". The user interface is incredibly simple – tap the left or right buttons to perform an action, hold the left button to perform a third \"alternate\" action, or hold the right button to advance to the next \"page.\"\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe DMC.micro Gen4 can access up to eight pages, whose functions may include:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDevice Control: Program select and bypass for up to four devices.\u003c\/li\u003e\r\n\u003cli\u003eUtility Mode X: User-set actions on left \/ right \/ alt buttons.\u003c\/li\u003e\r\n\u003cli\u003eUtility Mode Y: User-set actions on left \/ right \/ alt buttons. This mode is also assignable to looper controls for the Strymon Timeline, Eventide H9 \/ Timefactor, HX Stomp \/ Effects, or Line 6 M9\/M13.\u003c\/li\u003e\r\n\u003cli\u003ePreset: Stores programs from Device Control pages and allows the user to change multiple devices at once.\u003c\/li\u003e\r\n\u003cli\u003eClock: Control the DMC.micro Gen4’s built-in MIDI clock generator\u003c\/li\u003e\r\n\u003cli\u003eWeb-based editor: Completely configure the entire controller, set preset names, re-order presets, import and export controller settings.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44451119792231,"sku":"457712","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-designs-dmc-micro-gen4_457712_1.jpg?v=1787095914"},{"product_id":"disaster-area-designs-dpc-micro-demo-deal-open-box","title":"Disaster Area Designs DPC.micro MIDI Controller Pedal (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs DPC.micro MIDI Controller Pedal\u003c\/strong\u003e is Disaster Area's most compact loop switching controller, with three true bypass loops in a standard 125B enclosure. The DPC.micro works as a standalone device, to switch three separate pedals or signal chains, or as a MIDI-controlled loop expander for your rig. Each loop may be controlled using a MIDI CC message or program change message, and the DPC.micro can store up to 120 preset combinations for instant recall over MIDI.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull MIDI implementation - activate loops with MIDI CC or PC messages\u003c\/li\u003e\n\u003cli\u003eEach loop LED is configurable for color and brightness\u003c\/li\u003e\n\u003cli\u003eManual mode selects one loop at a time\u003c\/li\u003e\n\u003cli\u003ePreset mode selects multiple loops at once\u003c\/li\u003e\n\u003cli\u003eOptional pop-stopping function\u003c\/li\u003e\n\u003cli\u003eNo buffer or signal conditioning - works great with impedance-sensitive pedals like fuzz, wah, vibe, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you already have a MIDI controller, the DPC.micro can act as a MIDI “slave” on any available channel. You can even connect up to four DPC.micro to create your own modular switching rig.\u003c\/p\u003e\n\u003cp\u003eThe DPC.micro is fully compatible with the Disaster Area Gen3 pedal controllers – connect it to add three effects loops under MIDI control.\u003c\/p\u003e\n\u003cp\u003eDo you have a MIDI-capable multi-effects unit like the Line 6 Helix \/ Helix LT \/ HX Effects, or Fractal AX8? The DPC.micro can interface directly with your rig to add up to three independently controllable loops for your non-MIDI pedals! Combine your favorite analog distortion, compression, modulation, and delay pedals with the digital sounds from your other gear, without giving up your control and flexibility.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44451148300391,"sku":"461579","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-designs-dmc-micro_193594_1.jpg?v=1787096026"},{"product_id":"disaster-area-designs-micro-clock-gen-4-midi-tap-tempo-and-clock-source","title":"Disaster Area Designs micro.CLOCK Gen 4 MIDI Tap Tempo and Clock Source Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Area Designs micro.CLOCK Gen 4\u003c\/strong\u003e MIDI tap tempo and clock source allows you to synchronize your tempo-enabled MIDI and non-MIDI devices, without taking up too much precious board space. The micro.clock Gen 4 shrinks their advanced MIDI timing technology into a tiny package – just 3.6 in x 1.5 in x 1.6 in. Tap the footswitch to set the master clock tempo. The micro.clock will then send taps to your devices to lock them in to your music. Selectable subdivisions let you tap in quarter-notes and set your devices to whole, half, quarter, dotted 8th, 8th, quarter- and 8th-note triplets, 16th notes, and even the \"Golden Ratio!\"\u003c\/p\u003e\r\n\r\n\u003cp\u003eBright OLED display shows your tempo in BPM or milliseconds, preset name, and setup information. User-selectable footswitch modes allow you to make the micro.clock Gen4 work the way you want. Tap the footswitch to set the tempo, start\/stop the clock, or change presets quickly on the fly. Each tempo preset allows you to specify a tempo in BPM or milliseconds, as well as subdivisions or toggle settings for each of the three outputs. You can also set the micro.clock to send a MIDI Program Change to an external MIDI device.\u003c\/p\u003e\r\n\r\n\u003cp\u003eHave a pedal that needs an odd or unusual configuration for tempo control? The micro.clock works with devices that accept a normally-open or normally-closed footswitch, and can even send 0-3.3V control voltage that works with some pedals with expression control of delay\/tempo. Check with your pedal builder for details on their expression options! Want to configure using your computer instead of on-device? No problem! They have a convenient web-based editor to customize every setting on the controller.\u003c\/p\u003e","brand":"Disaster Area Designs","offers":[{"title":"Default Title","offer_id":44451154329703,"sku":"464131","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/disaster-area-designs-micro-clock-gen-4-midi-tap-tempo-and-clock-source-v2-24_464131_1.jpg?v=1787096050"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/disaster-area-designs.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}