{"title":"EarthQuaker Devices","description":null,"products":[{"product_id":"earthquaker-devices-bit-commander-octave-synth","title":"EarthQuaker Devices Bit Commander Octave Synth","description":"The \u003cstrong\u003eBit Commander\u003c\/strong\u003e is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. It’s no-nonsense interface makes it easy to add or subtract octaves to create a wide variety of sounds without having to dial in envelopes or oscillators. Ripping sub-octave thump, pulsing octave down, a lightly squared base tone and a swelling transformer based octave up all join together to make a single guitar sound like an army of olde tyme synths.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLike all analog octave effects, there are some basic rules to follow that will get you the most enjoyment from your Bit Commander. Use the neck pickup and play single notes. The best tracking occurs from the 7th fret up on all the strings. Below the 7th will still track but there will be occasional glitches and stutters. The lower the note, the harder it is for the Bit Commander to register. The use of Bass and lower registers on keyboards will yield unexpected, sometimes pleasing, sometimes disgusting results. These are not mistakes or flaws, it is the nature of analog octaves.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSub\u003c\/strong\u003e: Two octaves down level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDown 1\u003c\/strong\u003e: One octave down level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUp 1\u003c\/strong\u003e: One octave up level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBase\u003c\/strong\u003e: Squared input signal level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e: Master volume\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilter\u003c\/strong\u003e: Tone control, more highs clockwise, more warmth counter clockwise\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnalog, true bypass and hand made one at a time in the republic of Akron Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449547878503,"sku":"33463","price":148.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_bit_commander_top_20bbdd55-2c90-481a-9045-40263c9c78fd.jpg?v=1787089406"},{"product_id":"earthquaker-devices-disaster-transport-delay","title":"EarthQuaker Devices Disaster Transport Delay","description":"The\u003cstrong\u003e Disaster Transport\u003c\/strong\u003e is an analog voiced digital delay with 625ms delay time, all analog dry signal path, true bypass and added modulation. It was designed as an anti-modern delay for those who appreciate a nice tape echo with all it’s peculiarities. It’s unique tone control doubles as a noise filter on longer delay settings and really helps the delay shine with a dirty signal. The mix control allows you to boost the effected signal to nearly 4x the original signal level and the modulation can go from subtle pitch shifting warble to ultra fast tremolo speeds while the LED visually shows the rate.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMix- \u003c\/strong\u003eSets the output level of the effected signal. This should be treated as a gain control\/ master volume for the delay line. Unity is around noon and everything above noon will boost the delayed signal louder than the original. This is a gain control so, like any pedal with a lot of gain, a hint of noise and distortion at max setting is completely normal.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTone-\u003c\/strong\u003e Most delay pedals are heavily filtered at the output to remove the clock noise and other unwanted hash that is common from extending the range of the delay time beyond the limit of the circuitry. This usually leaves the delay sounding dark, muddy and disappear when hitting it with dirt. The Disaster Transport has done away with a lot of the heavy filtering and replaced it with a tone control which allows the user to choose their desired sound and results in more natural tape-like repeats. The tone control is at it’s darkest fully counter clockwise and brightens as you turn it clockwise. A good rule of thumb is to leave the tone control between off (fully counter clockwise) and noon at longer delay times. This will remove all the common noise from hyper-extending the circuit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTime-\u003c\/strong\u003e From about 30ms fully counter clockwise to about 625ms fully clockwise.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRepeats-\u003c\/strong\u003e Sets the regeneration of the delay line. From one single repeat fully counter clock- wise, subtle repeats around 9 O’clock, strong naturally decaying repeats at noon, near infinite repeats around 2 O’clock and full on self oscillation fully clockwise.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth-\u003c\/strong\u003e Sets the depth of the modulation to the delay line. The modulation is true pitch-shifting vibrato, higher depth settings will give sea sick pitch bending, lower settings will yield a more natural chorus\/leslie\/tremolo setting depending on modulation rate and delay time. To achieve a more natural modulation, the depth should be reduced as the delay time is increased.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRate- \u003c\/strong\u003eSets the speed of the modulation. Goes from painfully slow to way-to-fast allowing several different modulation styles to reveal themselves.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBypass-\u003c\/strong\u003e Turns the effect on\/off.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449547911271,"sku":"33454","price":150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_bit_disaster_transport_top_93f4d963-eb4d-46a3-818f-fbbae1c4eae6.jpg?v=1787089407"},{"product_id":"earthquaker-devices-dispatch-master-delay-and-reverb","title":"EarthQuaker Devices Dispatch Master Delay and Reverb","description":"\u003cp\u003eThe \u003cstrong\u003eDispatch Master \u003c\/strong\u003ehas grown to be one of the most popular and versatile delay\/reverb pedals on the market. Loved for both it’s small size and lush sound, the Dispatch Master is capable of producing nearly 2 seconds of delay time with near-infinite repeats and a cavernous reverb. The delay signal is clear and strong with no after effects or signal degradation and the repeats decay into a nice ambient swell with no oscillation. The reverb is MASSIVE and is sure to please those who love our Ghost Echo but want more modern depth and less artifacts. Both effects can be run separately or in unison. When using the reverb with no delay, the repeats control can be used to thicken up the reverb and give it more dimension. The Dispatch Master features a digital delay and reverb line with an all analog direct signal path and true bypass switching.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTime:\u003c\/strong\u003e Controls the delay time, from 0ms to nearly 2000ms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRepeats:\u003c\/strong\u003e Controls the regeneration of the delayed signal. Also acts as a enhancer for the reverb. In reverb mode this will control the thickness, decay, depth and overall nature of the reverb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReverb:\u003c\/strong\u003e Controls the reverb mix\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMix:\u003c\/strong\u003e Controls the over all level of the effected signal To use as a reverb only, turn the time control all the way down and adjust the reverb and mix controls to taste. In this mode, the repeats control can be used to enhance the thickness, decay, depth and overall nature of the reverb. With the reverb control at it’s maximum setting, the repeats control will gradually overload the effect at higher settings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo use as a delay only, turn the reverb control all the way down and adjust the time, repeats and mix controls to taste. To use both effects in unison, adjust all controls to taste. True bypass and hand made one at a time in landlocked Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449547976807,"sku":"33452","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_dispatch_master_top_615e528a-1f72-4756-9883-157bd71377f3.jpg?v=1787089407"},{"product_id":"earthquaker-devices-grand-orbiter-phaser","title":"EarthQuaker Devices Grand Orbiter Phaser","description":"Four stages of vintage OTA based phased shifting. Two LFO speeds that can go from painfully slow to blazing fast. Dry kill switch to get vibe\/vibrato effect, depending on where the controls are set. Rate controls the speed of the LFO, extremely wide range in conjunction with the two mode switch. Depth controls the amount of phase shift mixed with the dry signal (not how the LFO shifts the filters) so you can get very subtle pseudo 2 stage through full on. Sweep controls the frequency range and resonance controls the regeneration which makes the effect more or less intense. The sweep and resonance have a large range and you can dial in classic subtle tones through over the top phasing.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* There is no audible difference between the Grand Orbiter pictured and the previous silver box version.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e Controls the amount of phase effect mixed with dry signal. When “dry” switch is in the off position, this should remain at max.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRate:\u003c\/strong\u003e Controls the speed of the LFO\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSweep:\u003c\/strong\u003e Controls the Frequency range\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResonance:\u003c\/strong\u003e Controls the regeneration of the phasing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRate 1+2:\u003c\/strong\u003e Changes the range of the speed control. 1 is slower, 2 is faster.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry:\u003c\/strong\u003e Cuts the dry signal to create a vibe\/vibrato effect depending on the setting of the other controls. Vibrato is created by turning the rrsonance down low.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449547944039,"sku":"33456","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_grand_orbiter_top_a86c2565-28d1-49af-97cd-f815121b5109.jpg?v=1787089407"},{"product_id":"earthquaker-devices-hoof-fuzz","title":"EarthQuaker Devices Hoof Fuzz","description":"The \u003cstrong\u003eHoof\u003c\/strong\u003e is a no-fuss, easy to use device capable of sounds from warm, gritty overdrive to a huge sustaining fuzz. It’s a germanium\/silicon hybrid muff style fuzz (based on the old green russian muff) with massive amounts of volume on tap and smooth amp-like sustain. It has a tighter, cleaner sound than most muff’s which makes it more cutting and discernible in a band setting. The shift control is the key to the Hoof’s character, it alters the frequency response of the tone control. Clockwise scoops the mids and counterclockwise enhances the mids. The Hoof has become the go-to fuzz for many well known fuzz connoisseurs. All analog, true bypass and handmade in cloudy Akron, Ohio.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* There is no audible difference between the hoof pictured and the previous gold box version. The circuit is EXACTLY the same. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Fuzz \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTone \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLevel \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShift (mids)\u003c\/strong\u003e\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548009575,"sku":"33468","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_hoof_top_d29ed218-d699-4774-806c-3aae6ccabe47.jpg?v=1787089407"},{"product_id":"earthquaker-devices-hummingbird","title":"EarthQuaker Devices Hummingbird","description":"The \u003cstrong\u003eHummingbird\u003c\/strong\u003e is, at heart, a hard and choppy tremolo. What comes out is more akin to vintage synth style oscillations. It’s core is based on the old Vox Repeat Percussion with several updates to reduce noise, enhance the “chop” and add more control. It can create ring mod-like octaves, slow pulses, ping pong delay-like stutters, light blipping through machine gun stutter tremolo and many more wacky sounds!\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Hummingbird is all analog, true bypass and handmade one at a time on a cloud in Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth: \u003c\/strong\u003eControls amount of modulation from barely there to full signal chop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRate: \u003c\/strong\u003eControls the speed of the LFO\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLevel: \u003c\/strong\u003econtrols the input\/output level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMode: \u003c\/strong\u003efast\/slow switch for LFO rate\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548042343,"sku":"33455","price":123.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_hummingbird_top_43f13111-ab36-471e-8557-9eb8c20c0904.jpg?v=1787089407"},{"product_id":"earthquaker-devices-rainbow-machine-pitch-shifter","title":"EarthQuaker Devices Rainbow Machine Pitch Shifter","description":"Welcome to the \u003cstrong\u003eRainbow Machine\u003c\/strong\u003e, in all its synthetic glory! This one is for experimenters, adventurists and noisemakers. Totally not for purists and\/or tone hounds, there are no “natural sounds” that will come from this box. It takes modern DSP and uses it as a tool of future past to create real time pitch shifting using digital oscillators. The sound is much different than most modern day pitch shifting devices. It was imagineered to be wild and out of control and slightly imperfect while still tracking up and down the guitar neck without glitching out. A cold digital beast made to pretend it has feelings. It will do basic polyphonic harmonies from a 4th down through a 3rd up and every atonal pitch in between. You may add in an accompanying octave to the harmony by bringing up the Secondary function control. You can take it way beyond and open up your third eye by bringing in the Magic. The Magic is the heart of the Rainbow Machine. In conjunction with the Tracking control, the Magic creates wild pitch take offs and descents, chaos chorusing, shrieks, pixie trails and wealth of other general mayhem inducing noises. The pitch can be controlled by an external expression pedal for extra fun! The Rainbow Machine can be used on bass, keys, vocals or anything else you can dream up!","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548075111,"sku":"33464","price":191.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_rainbow_machine_top_5c1a4ea1-109e-4020-8b19-2974c348c547.jpg?v=1787089407"},{"product_id":"earthquaker-devices-sea-machine-chorus","title":"EarthQuaker Devices Sea Machine Chorus","description":"The \u003cstrong\u003eSea Machine\u003c\/strong\u003e is a chorus pedal with ultimate control over parameters rarely, if ever, seen in a chorus before. A hybrid of digital and analog circuitry with a slightly extended delay time allows it to really stand out and shimmer. Subtle warble, classic leslie, sea sick pitch bends, strangled aliens, stunted arpeggiations… there is something for everyone in the Sea Machine. Designed to work well following fuzz, distortion or overdrive without getting muddy, loss of volume or breaking up (the Sea Machine has excellent headroom at both 9 \u0026amp; 12 volts). When engaged, the transparent buffer leaves the all analog dry signal unaltered and crystal clear. It can be powered from 9-12v DC, higher voltage yields a more intense modulation, slightly longer delay time with more chime and dimension. The Sea Machine is true bypass and made by human hands with the highest quality parts in lovely Akron Ohio.\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRate:\u003c\/strong\u003e Speed of the LFO. • Shape: From soft triangle through hard square wave.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimension:\u003c\/strong\u003e Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an echo-resonance at max.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIntensity: \u003c\/strong\u003eHow much the LFO modulates the delay time\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAnimate:\u003c\/strong\u003e How far the pitch shifted signal swings, lower levels equals a tighter and more focused shift à la traditional chorus. As you increase the control a more wild and animated pitch shift begins to emerge.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e How much modulated signal is blended in with the dry signal.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548107879,"sku":"33458","price":215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_seamachine_top_96eb6c81-1db8-4cb8-81f0-0143b07e468b.jpg?v=1787089407"},{"product_id":"earthquaker-devices-speaker-cranker-overdrive","title":"EarthQuaker Devices Speaker Cranker Overdrive","description":"The \u003cstrong\u003eSpeaker Cranker\u003c\/strong\u003e is an all discrete dirt enhancement device designed to give your amp some grit and a slight boost without drastically changing the character or tone of your set up. It’s perfect for those that don’t like to fiddle with pesky controls yet want to add a little tube-like breakup or enhance an already over driven amp (or pedal) to give it some extra crunch without over loading the preamp. The single “More” control allows you choose the amount of break up you desire. Just like you would with a tube amp, back it off to thin out the sound and clean it up or crank it up for a fuller sound with a bit of compression.","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548140647,"sku":"33461","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_speaker_cranker_top_6f59fd45-db67-468b-b3da-64daed8d4f14.jpg?v=1787089407"},{"product_id":"earthquaker-devices-tone-job","title":"EarthQuaker Devices Tone Job","description":"The \u003cstrong\u003eTone Job\u003c\/strong\u003e is a complete tone enhancement tool designed around a stereo preamp to cover as much frequency range as possible. What does this mean for you, the user? It means it can handle a wide variety of frequencies from electrical guitars, bass guitar, synthesizer machines and just about anything else you can plug in. The treble, bass and middle controls will cut or boost up to 20db. In addition to that, the level control will boost the signal (post EQ) up to 5 times the input depending on where the dial is set. A simple, perfect pedal to place at the end of your effect chain to boost output and fine tune your tone or at the front of the chain to alter the character of your guitar and breath new life into tired old dirt.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLevel:\u003c\/strong\u003e Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 O’Clock.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTreble: \u003c\/strong\u003eNoon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBass:\u003c\/strong\u003e Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMiddle:\u003c\/strong\u003e Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTreble affects frequencies from around 2k Hz up, bass affects frequencies from around 500 Hz down. The middle is an adjustable resonant filter acting as a midrange control with it’s center frequency around 1k Hz. Treble and bass response are dependent on middle control settings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAnalog, true bypass and hand made one at a time in good old Akron Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548173415,"sku":"33462","price":123.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_tone_job_top_ccc3ba16-fe93-4e9b-807f-d1f7ef9c2e07.jpg?v=1787089408"},{"product_id":"earthquaker-devices-talons-high-gain-overdrive","title":"EarthQuaker Devices Talons","description":"The \u003cstrong\u003eTalons\u003c\/strong\u003e is an extremely versatile high gain overdrive that serves up the full range of gain from transparent boost to heavy saturation, and all points in between. Unlike all our other overdrives, the Talons was not designed to emulate any specific sound or era. The presence control gives you a wide range of top-end contour and the active, 3 band EQ lets you sculpt your tone to perfection. The Talons can be powered at the standard 9v for a warmer amp-like tone or at 18v for greater headroom, more volume and a brighter, stiffer grind. All analog, true bypass and handmade one at a time in dusty Akron, Ohio.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e A standard 9-18 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel. 18v will yield higher headroom with a slightly brighter, stronger tone and more volume. We strongly recommend a high quality power supply with isolated outputs and good filtering to avoid unwanted noise. Will also run off a 9v battery for you olde tymee types.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTreble:\u003c\/strong\u003e Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMiddle:\u003c\/strong\u003e Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBass:\u003c\/strong\u003e Noon is flat, boost is clockwise from noon, cut is counter clockwise from noon.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePresence:\u003c\/strong\u003e Adjusts the top end and upper mids to control the amount of “sizzle” in the dirt. Turn clockwise for a brighter tone, counter clockwise to mellow it out.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e Preamp volume control. Controls the amount of dirt available, from clean to heavy crunch.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLevel:\u003c\/strong\u003e Master volume control. There is a lot of level on tap, please adjust accordingly.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449548206183,"sku":"33459","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_talons_top_cba3b8c6-12e4-4365-9b14-a4304a258b98.jpg?v=1787089408"},{"product_id":"earthquaker-devices-arpanoid","title":"EarthQuaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator Pedal","description":"\u003cp\u003eThe first dedicated compact polyphonic pitch arpeggiator effect pedal for electrical guitar! What does the \u003cstrong\u003eEarthQuaker Devices Arpanoid\u003c\/strong\u003e do? The Arpanoid takes whatever you play and transforms it into an adjustable ascending or descending scale. It features 8 intuitive and expandable modes and will work on complex chords as well as single notes in any key. The Arpanoid has an all analog dry signal, all digital wet signal and true bypass switching.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWet\u003c\/strong\u003e\u003cbr\u003eLevel control for the effect signal. Unity is around noon.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDry\u003c\/strong\u003e\u003cbr\u003eLevel control for the dry signal. Unity is around noon.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRate\u003c\/strong\u003e\u003cbr\u003eAdjusts the speed of the sequence.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStep\u003c\/strong\u003e\u003cbr\u003eSelects how many notes there are in the sequence which determines the overall feel and timing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eToggle Switch\u003c\/strong\u003e\u003cbr\u003eControls the direction of the sequence. All the way left is up, the sequence will continually repeat going up. In the middle is up\/down, the sequence will continually repeat going up then back down. All the way right is down, the signal will continually repeat going down.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMode - 8 position selector switch to choose the octave and key:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMajor: -1 octave to root.\u003c\/li\u003e\n\u003cli\u003eMajor: root to +1 octave.\u003c\/li\u003e\n\u003cli\u003eMajor: -1 octave through +1\u003c\/li\u003e\n\u003cli\u003eMajor: Random pattern\u003c\/li\u003e\n\u003cli\u003eMinor: -1 octave to root.\u003c\/li\u003e\n\u003cli\u003eMinor: root to +1 octave.\u003c\/li\u003e\n\u003cli\u003eMinor: -1 octave through +1\u003c\/li\u003e\n\u003cli\u003eMinor: Random pattern\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMeasures\u003c\/strong\u003e\u003cbr\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eA standard 9 volt DC power supply with a negative center 2.1mm barrel, no battery option. We do not recommend using this pedal on a daisy chain. Please use a a dedicated power supply or isolated output from a multiple tap power supply for best performance. Do not run at higher voltages!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHelpful Tip\u003c\/strong\u003e\u003cbr\u003eWe suggest you treat your Arpanoid like a new instrument and take the time to learn how it works. Once you understand how the Arpanoid will work for you, you’ll receive a lifetime of enjoyment from your new device.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449567146087,"sku":"34694","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_arpanoid_top_90f5d005-dd77-430a-aaf5-d0ea2e8473ce.jpg?v=1787089491"},{"product_id":"earthquaker-devices-disaster-transport-sr-delay","title":"EarthQuaker Devices Disaster Transport SR Advanced Delay\/Reverb","description":"\u003cp\u003eThe \u003cstrong\u003eDisaster Transport Sr\u003c\/strong\u003e is a dual delay with reverb and modulation. It was designed from the ground up to create an intense wash of lo-fi swirling tape styled echo. While it may look intimidating at first glance, it’s actually pretty easy to navigate. The top row of controls are for delay A and the bottom row of controls are for delay B. Delay A is a 600ms delay with modulation and delay B is a 300ms delay with reverb. Both delays can be run separately, in parallel, in series or in series\/parallel. To take it one step further, there are also expression controls for the repeats on delay A as well as bleeding delay A into delay B. The switching was designed so each delay can be used individually or in tandem with both true bypass or trails.\u003c\/p\u003e\n\u003cp\u003eIn addition to being used as a straight delay, straight reverb, rhythmic delay, modulated delay and old school tape-style echo, the Disaster Transport SR can also be used to create a wide variety of wild sounds ranging from warped records, clanging flange, smooth chorus, echoed out squalls and various other-worldly effects that will blow your mind, man. If you are a fan of old school tape delay and crazy lo-fi sounds, you will get hours of enjoyment every time you plug into the Disaster Transport Sr.\u003c\/p\u003e\n\u003cp\u003eHand made one at a time in sunny Akron, Ohio USA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449574682727,"sku":"35055","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_disaster_delay_sr_top_1b46693d-f69f-4178-a9ab-50e686c8ec3a.jpg?v=1787089524"},{"product_id":"earthquaker-devices-the-warden","title":"EarthQuaker Devices The Warden V2 Optical Compressor Pedal","description":"\u003cp\u003e\u003cstrong\u003eThe Warden\u003c\/strong\u003e is an optical compressor with a feature set usually reserved for studio grade units. Built with high grade components and internally powered by 18v, The Warden has loads of gain and sustain on tap. With complete control over attack, release, sustain and ratio, The Warden will allow everything from a heavy squash with fast attack and release to “barely there” subtle compression. Optical compression has a reputation for having more character than a VCA or FET based compression and The Warden is no exception.\u003c\/p\u003e\n\u003cp\u003eTrue Bypass and Handmade with sweet loving care in Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449574715495,"sku":"35015","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_warden_top_ee6fefde-7a68-49ee-bcc3-ee96a8e32149.jpg?v=1787089525"},{"product_id":"earthquaker-devices-organizer-polyphonic-organ-emulator","title":"EarthQuaker Devices Organizer Polyphonic Organ Emulator","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Organizer\u003c\/strong\u003e is a polyphonic organ emulator designed to mimic the organ tones of yesteryear crossed with the highly unique “Guitorgan”. It has a warm and very analog feel with a hint of Leslie warble that is unlike other modern octave shifters. It is simple to dial in and tracks chords as well as single notes perfectly all over the neck on both guitar and bass. Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums… If it makes sound, the Organizer can handle it! The Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path. It is made by hand, one at a time in dirty Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe controls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp:\u003c\/strong\u003e Level control for the octave up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown:\u003c\/strong\u003e Level control for the octave down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoir:\u003c\/strong\u003e This control takes a mix of the octave up and octave down setting and regenerates it. The end result is an additional 2 octaves up, 2 octaves down and direct signal with a slight delay that adds a “church organ” like feel. This control only works if the octave up and octave down are in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect:\u003c\/strong\u003e Level control for the analog dry signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone:\u003c\/strong\u003e Rolls off the high end as you dial it counter-clockwise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLag:\u003c\/strong\u003e Delay control for the wet signal. Full counter-clockwise is minimal delay, delay time increases as it rotates clockwise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eA standard 9 volt DC power supply with a negative center 2.1mm barrel, no battery option. We do not recommend using this pedal on a daisy chain. Please use a a dedicated power supply or isolated output from a multiple tap power supply for best performance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003eThe Organizer has an output gain stage with no master control. When it’s idle, even with all knobs at zero, the will be about as much “white noise” as an average overdrive pedal with it’s gain at zero and the level set to unity. A minimal amount while idle is normal but it will not be noticeable during play. The sound will be more apparent in front of a gained up amp or other dirt\/gain\/boost pedals.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449610465383,"sku":"33460","price":157.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_organizer_954443a2-6e99-480e-bf8a-f120c6656422.jpg?v=1787089683"},{"product_id":"earthquaker-devices-the-depths-optical-vibe-machine","title":"EarthQuaker Devices The Depths Optical Vibe Machine","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices The Depths\u003c\/strong\u003e is a take on the classic optical vibe circuit. It creates a lush, phasing pulse which delivers a three-dimensional swirling sound. The Depths has been optimized to work well with all types of instruments, pickup types and to play well with dirt. With its “Voice” and “Throb” controls, The Depths can achieve sounds from thin and subtle to warm and deep and everything in between. The “Intensity” and “Rate” will go from a smooth, ultra-slow warble all the way to speedy, sharp bursts allowing you to get more than just the classic vibe sounds. The “Level” will allow you to boost the signal well above unity to make up for any perceived volume loss commonly found in vibe pedals. In addition to all that, The Depths can be powered by 9v for warmer tones or up to 18v for a stiffer tone with more headroom and sparkle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice:\u003c\/strong\u003e Dials in the overall sound. Turn it clockwise for a fuller sound with more lows, bring it back for a thinner, more midrange focused tone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrob:\u003c\/strong\u003e This controls the low end pulse. It may not be immediately evident on the bridge pickup, but switch to the neck or add some dirt and it comes alive. All the way up for more throb, dial it back for less. Works best when the “Voice” is set to a warmer tone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntensity:\u003c\/strong\u003e This controls how subtle or intense the overall effect is. Counter clockwise from noon are the more subtle, classic sounds. Clockwise from noon are the more drastic and intense sounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRate: \u003c\/strong\u003eControls the speed of the effect. Counterclockwise for slow, clockwise for fast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel:\u003c\/strong\u003e Controls the volume of the effect. Unity is around 1 O’clock, everything above that is boost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003eA standard regulated 9-18 volt DC power supply with a negative center 2.1mm barrel. We do not recommend any adapter that isn’t designed for musical instruments. Do not run at higher voltages! Powering at 9v gives a warmer and more natural sound, 18v will be stronger with more headroom and “sparkle”. Does not use batteries. Current draw is 35ma.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449610498151,"sku":"33450","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_the_depths_d08f1ca2-69a4-49ab-befe-87184d189018.jpg?v=1787089683"},{"product_id":"earthquaker-devices-afterneath-otherworldy-reverb","title":"EarthQuaker Devices Afterneath Otherworldy Reverb","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Afterneath\u003c\/strong\u003e is an otherworldly reverberation machine that uses a swarm of short delays to create wild and cavernous reverbs and scattered, short rhythmic delays with bizarre characteristics. The reverb created is beyond massive and goes well beyond the territory of most reverb pedals. The controls allow you to stretch, smudge, swell and even self-oscillate into messy ambient washes of sound. The Length control adjusts the decay of the reverb; anything from shorter hall through endless plate style reverbs can be achieved. The Reflect knob controls the regeneration, basically feeding the output back through to create an even deeper otherworldly dreamscape. The Drag control lets you pull the reverb through time by slowing down or speeding up the reverb. The Diffuse knob adds control over spread of the reverb ranging from identifiable attack to a wash of smooth reverb. The Dampen control adjusts the tone of the reverb, both stinging bright tones and warmer swell. The end result is an ethereal, ambient wash that goes from hall to an infinite glitched-out orchestra pit warming up in a canyon at the bottom of another canyon inside a well.\u003c\/p\u003e\n\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e\n\u003cli\u003ePower: Standard 9 volt DC power supply* with negative center 2.1mm barrel, no battery option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003e*The manufacturer does not recommend using this pedal on a daisy chain. Please use a a dedicated power supply or isolated output from a multiple tap power supply for best performance. Do not use any generic adapter (anything from RadioShack or similar). Do not run at higher voltages! Current Draw is 65ma.\u003c\/strong\u003e\u003cbr\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449649295463,"sku":"40539","price":225.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_afterneath_e2a89167-0abd-4ae8-94f2-d384d3c2740c.jpg?v=1787089833"},{"product_id":"earthquaker-devices-arrows-pre-amp-booster","title":"EarthQuaker Devices Arrows Pre-Amp Booster","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Arrows\u003c\/strong\u003e was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Its simple interface is no nonsense; a single control that will either boost or cut you signal. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: \u003cspan\u003e4.37″ X 2.37″ X 1.5″ with knob\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: \u003cspan\u003e9v battery or any standard 9 volt DC power supply with a negative center 2.1mm barrel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449649360999,"sku":"40540","price":80.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_arrows_a58b92ad-0463-4744-92ba-d01b52488713.jpg?v=1787089834"},{"product_id":"earthquaker-devices-grand-orbiter-phase-machine-v2","title":"EarthQuaker Devices Grand Orbiter Phase Machine V2","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Grand Orbiter V2\u003c\/strong\u003e is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has three way toggle switch to select between the ranges of modulation: Rate 1 is slow sweep mode, Rate 2 kills the LFO and allows you to use the Grand Orbiter as a fixed resonant filter and Rate 3 is fast sweep mode. The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode. The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal’s tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone. You can also use the Grand Orbiter as a true pitch vibrato with the “Phase\/Vibrato” switch. When in “Vibrato” mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 100% analog, true bypass and built by entirely by hand in beachy Akron, Ohio..\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew to V2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmaller footprint\u003c\/li\u003e\n\u003cli\u003eAdded LFO kill mode so you can use the Orbiter as a fixed resonant filter\u003c\/li\u003e\n\u003cli\u003eAdded an additional LED that will show the rate even in bypass mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e\n\u003cli\u003ePower: Any standard 9 volt DC power supply with a negative center 2.1mm barrel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449649459303,"sku":"40657","price":132.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_grand_orbiter_a4378d13-18be-4aba-b325-989603367ed4.jpg?v=1787089834"},{"product_id":"earthquaker-devices-palisades-mega-ulimate-overdrive-classic","title":"EarthQuaker Devices Palisades V2 Mega Ulimate Overdrive Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Palisades \u003c\/strong\u003eis an overdrive based on the legendary TS808. After loads of requests EarthQuaker Devices finally buckled. When designing this pedal, they ran tests with every popular clone on the market, as well as several vintage originals, compared, contrasted and took loads of notes. It was an exhausting but informative process, but, in the end, they decided to trust their ears, coming up with what they feel is the most versatile relative of the 808 available today.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith 6 different clipping voices, 5 bandwidth settings and 2 gain channels you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The clipping voices determine how transparent and open or tight and crunchy the distortion is. They will vary drastically depending on where the gain is set, what channel is active and how much bandwidth is being used. The bandwidth sets the frequency response of the distortion and goes from thin, light and clean through fat heavy and crunchy. It may very well be the single most important control the palisades has and what really sets it apart.\u003c\/p\u003e\n\u003cp\u003eGain A is a lower gain channel with a wider range of grit that is great for strumming open chords. Gain B is a higher gain channel with a tighter range that is great for palm muting and\/or shredding solos. The Palisades also has a foot switchable volume boost with adjustable level to take it over the top when you want to throw your foot up on the monitor and rip your sweet leads… or maybe just push the front end of you amp a little harder. Not enough? How about a normal\/bright switch to mix and match the overall tone to different amps and guitars. Still not enough? OK then, how about a buffer on\/off switch to tighten up the tone and make it sparkle when set to “ON” or warm it up and make it sag when set to “OFF”.\u003c\/p\u003e\n\u003cp\u003eThe Palisades is a versatile dude that will give you years of loving companionship. Each Palisades is hand made one at a time in the tiny tree house community of Akron, Ohio.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: \u003cspan\u003e5.5″ x 4.5″ x 2.5″ with knobs\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: Standard \u003cspan\u003e9volt DC power supply intended for musical instruments with a negative center 2.1mm barrel\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449649524839,"sku":"40548","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_palisades_b8fba1fd-4ab3-4ad8-bd1a-5d9c17132fb7.jpg?v=1787089834"},{"product_id":"earthquaker-devices-cloven-hoof-fuzz-red","title":"EarthQuaker Devices Cloven Hoof Fuzz - Red","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Cloven Hoof \u003c\/strong\u003eis an \u003cspan\u003eis an extension of EarthQuaker's popular Hoof fuzz. They kept the clarity and the wide range of dirt tones of the Hoof,\u003cbr\u003eand redesigned everything around it. The Cloven Hoof delivers a grittier, more bass heavy tone with more crunch that can not be achieved with the standard Hoof. They did away with the germanium transistors and replaced them with four specially selected silicon transistors for higher gains, cleaner cleans and improved temperature stability. The fuzz control has four times the range of the regular Hoof, it will go from completely clean to an all out fuzz fury with more grind at the top end of the dial. The tone control has been refined to allow a more even sweep with enough mids to handle all the additional low end. The shift control still boosts or cuts the mids and there is still a TON of output on tap. The Cloven Hoof is the perfect solution for those of you who always wished the Hoof had more. Each Cloven Hoof is made by hand in the majestic mountain top village of Akron, Ohio.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: \u003cspan\u003e\u003cspan\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: Standard \u003cspan\u003e\u003cspan\u003e9 volt DC power supply* intended for musical instruments with a negative center 2.1mm barrel or a 9v battery \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12px;\"\u003e*Per the manufacturer, do not use any generic adapter (anything from RadioShack or similar). Do not run at higher voltages! Current Draw is about 10ma.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449649557607,"sku":"40660","price":148.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_cloven_hoof_red_ae6729b4-19ad-4bf5-a843-06a8e6d9dd12.jpg?v=1787089835"},{"product_id":"earthquaker-devices-hummingbird-demo-deal","title":"EarthQuaker Devices Hummingbird (Demo Deal)","description":"The \u003cstrong\u003eHummingbird\u003c\/strong\u003e is, at heart, a hard and choppy tremolo. What comes out is more akin to vintage synth style oscillations. It’s core is based on the old Vox Repeat Percussion with several updates to reduce noise, enhance the “chop” and add more control. It can create ring mod-like octaves, slow pulses, ping pong delay-like stutters, light blipping through machine gun stutter tremolo and many more wacky sounds!\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eThe Hummingbird is all analog, true bypass and handmade one at a time on a cloud in Akron, Ohio.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDepth: \u003c\/strong\u003eControls amount of modulation from barely there to full signal chop.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRate: \u003c\/strong\u003eControls the speed of the LFO\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLevel: \u003c\/strong\u003econtrols the input\/output level\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMode: \u003c\/strong\u003efast\/slow switch for LFO rate\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449705590887,"sku":"47330","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_hummingbird_top_1_31415323-edfd-477d-932a-b8b6d65d4a4a.jpg?v=1787090073"},{"product_id":"earthquaker-devices-bellows-fuzz-driver","title":"EarthQuaker Devices Bellows Fuzz Driver","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Bellows\u003c\/strong\u003e is a back-to-basics, transistor-based dirt device. This two-knob wonder has a whole lot of character for such a simple, unassuming pedal. It straddles the line between amp-like grit and fuzzy saturation to create a remarkably vintage, tweed-type tone.\u003c\/p\u003e  \u003cp\u003eSimilar to the volume control of a “non master” amp, the Drive determines how hard the signal hits the input. At lower drive levels it's a little wider and grittier. Resist the usual urge to dime it and keep the Drive low for mellow, amp-like break up. Slowly bring up the Drive and you'll eventually end up in blown out fuzz land, having passed a bunch of useful distorted places in between. It's pretty much every era of rock n' roll in a box.\u003c\/p\u003e  \u003cp\u003eWhile designed for guitar, Bellows also handles bass extremely well at growling low and scorching high levels. And if you're a guitar player that fancies themselves a bass player- then forget it, this is your favorite dirt pedal.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792327783,"sku":"52983","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52983_1_29b6f2ea-6ade-4e86-ae1c-7bc9bfc37b7e.jpg?v=1787090436"},{"product_id":"earthquaker-devices-avalanche-run-stereo-delay-reverb","title":"EarthQuaker Devices Avalanche Run","description":"\u003cp\u003eThe \u003cstrong\u003eAvalanche Run\u003c\/strong\u003e is EarthQuaker's first product built on a high powered DSP platform. The Avalanche Run was designed to satisfy all the requests EarthQuaker has received for a stereo and\/or tap tempo version of their wildly popular Dispatch Master.\u003c\/p\u003e  \u003cp\u003eWhile it is a delay and reverb just like the Dispatch Master, the style of delay and reverb is quite different. The delay has more of a tape quality with bucket brigade sensibilities and the reverb is adjustable while having more of a deep, plate-like cavernous tone.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eReverse delay mode\u003c\/li\u003e \u003cli\u003eSwell delay and reverb mode\u003c\/li\u003e \u003cli\u003eTap Tempo with subdivisons\u003c\/li\u003e \u003cli\u003eAssignable expression control\u003c\/li\u003e \u003cli\u003eTails\/True Bypass modes\u003c\/li\u003e \u003cli\u003eSound on sound style looping with adjustable length in tails mode\u003c\/li\u003e \u003cli\u003eAuto oscillation by holding down tap switch\u003c\/li\u003e \u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792360551,"sku":"52982","price":250.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52982_1_8a1e4286-5bef-4071-9f28-53de9da5f2eb.jpg?v=1787090436"},{"product_id":"earthquaker-devices-acapulco-gold-amp-distortion","title":"EarthQuaker Devices Acapulco Gold Amp Distortion","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Acapulco Gold\u003c\/strong\u003e is a dirt-simple power amp distortion device that's based on the vibe of a cranked Sunn Model T. You know what's awesome? Vintage Sunn Amplifiers. You know what else is awesome? Simplicity. One button, one knob. How loud would you like it? Just move the knob. This is the spirit of rock and roll. Quit turning knobs and play that guitar like you mean it.\u003c\/p\u003e  \u003cp\u003eWhile playing, you may want to try ignoring that suggestion and try fiddlin' with your guitar's volume and tone knobs as these can drastically affect the sound of the Acapulco Gold. The volume knob on your guitar cleans up the pedal nicely, but not too clean. At minimum guitar volume settings, the Gold imparts a hazy, Nashville-sounding spank to your tone. At just-barely-backed-off, the Gold turns into a raunchy overdrive. And of course when the guitar volume is completely open, the Gold roars like a Model T on the verge of explosion. It's not quite fuzz, but so close.\u003c\/p\u003e  \u003cp\u003eEach Acapulco Gold is made part by part, wire by wire, giant knob by giant knob with real, live human hands in Earthquaker's gilded factory located in Akron, Ohio, USA.\u003c\/p\u003e  \u003ch3\u003eControls\u003c\/h3\u003e  \u003cp\u003e\u003cstrong\u003eBig Knob\u003c\/strong\u003e: The big knob sets the output level, sometimes known as Volume.\u003c\/p\u003e  \u003cp\u003ePLEASE BE CAREFUL! The Acapulco Gold is extremely loud!\u003c\/p\u003e  \u003ch3\u003eMeasures\u003c\/h3\u003e  \u003cp\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knob\u003c\/p\u003e  \u003ch3\u003ePower\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. Earthquaker recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 30 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792426087,"sku":"52981","price":117.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52981_1_0e2b258f-19e2-4243-9a03-fa5352c29004.jpg?v=1787090436"},{"product_id":"earthquaker-devices-spatial-delivery-sample-hold","title":"EarthQuaker Devices Spatial Delivery Sample \u0026 Hold","description":"\u003ch3\u003eManufacturer's Description:\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Spatial Delivery\u003c\/strong\u003e is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah. It has 3 modes- Up Sweep, Down Sweep and Sample and Hold. With Range, Resonance and Filter controls you can get super emphasized filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive\/fuzz after the Spatial Delivery and you've got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you're a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you've just created a deep fried space droid computer freak-out. The filter can be cross faded between high pass (counter clockwise), band pass (center) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice. We recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further. Each Spatial Delivery is hand made bit by damn bit in silver studded Akron Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792458855,"sku":"52988","price":165.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52988_1_5d79de3d-b19f-4e7c-a34f-932d36e14813.jpg?v=1787090436"},{"product_id":"earthquaker-devices-night-wire-dynamic-harmonic-tremolo","title":"EarthQuaker Devices Night Wire Dynamic Harmonic Tremolo","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Night Wire\u003c\/strong\u003e is a feature-rich harmonic tremolo. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. The tremolo can be subtle and shimmery or full-on throbbing depending on where the depth control is set. With the depth set to zero, the Night Wire will act like a fixed filter, phase shifter or envelope-controlled filter depending on which mode the filter frequency is in. It also features a cut\/boost volume control to get your levels just right. Each Night Wire is hand made one at a time in the moonlit village of Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792491623,"sku":"52987","price":146.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52987_1_13783b94-c132-49ac-98bc-c4ada50b535d.jpg?v=1787090436"},{"product_id":"earthquaker-devices-gray-channel-dynamic-dirt-doubler","title":"EarthQuaker Devices Gray Channel Dynamic Dirt Doubler","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Gray Channel\u003c\/strong\u003e is two channels of a simple hard clipping overdrive that leaves the character of the guitar and amp intact. The Gray Channel retains the classic warm overdrive sound and expands upon it with several clipping options and bigger bass response. Each channel has 3 clipping modes. The Green channel- “Si” (Silicon clipping diodes), “Ge” (Germanium clipping diodes) and “N” (no clipping diodes). The “Si” mode will be bright\/loud\/fuzzy and has a natural tube type break up. “Ge” mode is a little looser with more lows and warmth and less output. “N” mode acts as a clean boost until you hit roughly 1 o’clock on the gain, at which point it’ll start to saturate the op amp into a biting, loud distortion.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eThe Modes\u003c\/h3\u003eHere, you’ve got “LED” (LED clipping diodes), “FET” (Mosfet clipping diodes) and “N” (again, no clipping diodes). “LED” mode is the loudest, cleanest and most touch sensitive\/least compressed. “Mos” mode is the most compressed with a tighter crunch; the biggest hesher of the group. And finally, the “N” mode is the same clean to crazy loud op amp distortion set-up as the Green channel. With a couple of switch clicks you can go from your bypassed tone to warm break up to over-the-top gnarly grind and any\/every combination in between. With more and more drive pedals moving onto already crowded pedal boards, having the Gray Channel dual overdrive is like, totally crucial for sonic growth and sustain. Join the fight to stop pedal board overcrowding, because before we can overdrive tomorrow, we must first drive today... or something. Each Gray Channel is built one at a time, part by gorgeous part at a former automotive paint factory by a bunch of smokestacks on a dead end street in Akron, Ohio.","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792524391,"sku":"52984","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52984_1_711002a2-3ff1-4912-bd05-4f7ea17a33d2.jpg?v=1787090436"},{"product_id":"earthquaker-devices-bows-germanium-booster","title":"EarthQuaker Devices Bows Germanium Booster","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Bows\u003c\/strong\u003e is a Germanium preamp designed around a rare NOS OC139 black glass transistor. For being a little one-knobber the Bows wears many hats. Right out of the box it's got several tone shaping abilities spread between two modes: Full and Treble. Full mode is warm with a lot of body and low end. Treble mode is a resonant, treble booster with a “cocked wah” tone that can drive any tube amp into harmonic rich distortion territory. Each mode has a little bit of grit to start with, but as you get passed 12 o'clock on either setting their subtleties are accented. The vowel-like sound out of the Treble side will be more prevalent as you bring the Level up. Doing the same on Full mode will get you a nice, full bodied crunch tone that retains clarity. Place any drive pedal before the Bows and it's another story. Full mode turns a dirt signal into a crumbling wall of sonic chaos, while Treble mode becomes an ultimate lead tone. Each and every Bows is built one at a time by real life human beans in the temperature controlled bubble of Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792589927,"sku":"52985","price":126.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52985_1_4b62e675-dd42-4e21-a768-53ed890932bc.jpg?v=1787090436"},{"product_id":"earthquaker-devices-spires-nu-face-double-fuzz","title":"EarthQuaker Devices Spires Nu Face Double Fuzz","description":"\u003ch3\u003eManufacturer's Description:\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Spires\u003c\/strong\u003e was born from my need to have my big old Rosac Nu Fuzz and our now discontinued Dream Crusher on my pedalboard without taking up all the space. The green channel features a cranked fuzz inspired by the Rosac Electronic Nu-Fuzz, which, for all the unacquainted fuzz seekers, was released in 1968- decades prior to the dreaded “nü” prefix ever being uttered. The original schematic for Rosac Nu Fuzz is somewhat of a mystery so I used my original to make a “sonic copy” that is pretty much dead on. It is full-on fuzz all the time and uses crude wide range tone control to change the character from big and warm to sizzling and blown out. The original was slightly below unity at max so I gave this one plenty of output volume while retaining the original tone. The Red channel is a silicon version of the now discontinued Dream Crusher. There's no need to mourn the loss anymore. Dreams will still be crushed with walls of classic two transistor fuzz, only this time the crushing will be much more stable and less temperature sensitive. It features a very usable, dynamic Fuzz control and tons of output volume, just like the original. Each Spires is hand made one at a time by a white gloved team of professional experts in the dirty, dusty canyon of Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449792557159,"sku":"52989","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker_52989_1_51ed5f17-54ea-4f29-b313-8f41c45980a5.jpg?v=1787090436"},{"product_id":"earthquaker-sound-projector-head-and-2x12-cabinet-black","title":"Earthquaker Sound Projector - Head and 2x12 Cabinet, Black","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Sound Projector 25\u003c\/strong\u003e is a 25-watt linear Class A tube amp designed by Joe Golden of EarthQuaker Devices. This is the first amplifier offering from EarthQuaker Devices! It features a no nonsense volume, treble and bass interface and is a perfect platform for those who want a low wattage amp but still want a full spectrum tone. Don’t let the 25 watts fool you, due to its Class A design, this thing is LOUD!\u003c\/p\u003e  \u003cp\u003eThe preamp section of the Sound Projector 25 boasts 12AX7 preamp tubes and Jupiter Condenser Company capacitors (from right here in Ohio) for a classic well rounded sound. While it excels as a pedal platform at lower volume levels, it also offers up an impressive smooth and natural overdrive when cranked.\u003c\/p\u003e  \u003cp\u003eThe power amp section comes stock with KT66 power tubes. If that’s not your bag, it will support popular octal power tubes such as 6L6, EL34 and 6V6 due to its external bias test points and trim pot. Swapping power tubes is easy to do (even for a novice) and offers a wide variety of tones from a single amp! It also features a custom wound Heyboer power transformer and output transformer, solid state rectifier and a foot switchable gain boost as well as taps for 4, 8 or 16 ohm cabinets.\u003c\/p\u003e  \u003cp\u003eThe speaker cabinets are handmade out of high quality Baltic Birch with ultra rugged box joint construction and feature a partial open back design that delivers a powerful, full frequency response. They come stock with two 12” Celestion Vintage 30’s or custom paired Warehouse guitar speakers.\u003c\/p\u003e  \u003cp\u003eFrom the woodwork and tolex to the design and assembly, every piece of the Sound Projector 25 was done by loving hands at the EarthQuaker headquarters in Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449823096935,"sku":"53814","price":1995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-sound-projector-25-white_53814_1_8a78b0c4-1eb4-4dac-9d29-be60e2e129d4.jpg?v=1787090571"},{"product_id":"earthquaker-sound-projector-head-and-2x12-cabinet-white","title":"Earthquaker Sound Projector - Head and 2x12 Cabinet, White","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Sound Projector 25\u003c\/strong\u003e is a 25-watt linear Class A tube amp designed by Joe Golden of EarthQuaker Devices. This is the first amplifier offering from EarthQuaker Devices! It features a no nonsense volume, treble and bass interface and is a perfect platform for those who want a low wattage amp but still want a full spectrum tone. Don’t let the 25 watts fool you, due to its Class A design, this thing is LOUD!\u003c\/p\u003e  \u003cp\u003eThe preamp section of the Sound Projector 25 boasts 12AX7 preamp tubes and Jupiter Condenser Company capacitors (from right here in Ohio) for a classic well rounded sound. While it excels as a pedal platform at lower volume levels, it also offers up an impressive smooth and natural overdrive when cranked.\u003c\/p\u003e  \u003cp\u003eThe power amp section comes stock with KT66 power tubes. If that’s not your bag, it will support popular octal power tubes such as 6L6, EL34 and 6V6 due to its external bias test points and trim pot. Swapping power tubes is easy to do (even for a novice) and offers a wide variety of tones from a single amp! It also features a custom wound Heyboer power transformer and output transformer, solid state rectifier and a foot switchable gain boost as well as taps for 4, 8 or 16 ohm cabinets.\u003c\/p\u003e  \u003cp\u003eThe speaker cabinets are handmade out of high quality Baltic Birch with ultra rugged box joint construction and feature a partial open back design that delivers a powerful, full frequency response. They come stock with two 12” Celestion Vintage 30’s or custom paired Warehouse guitar speakers.\u003c\/p\u003e  \u003cp\u003eFrom the woodwork and tolex to the design and assembly, every piece of the Sound Projector 25 was done by loving hands at the EarthQuaker headquarters in Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449823129703,"sku":"53813","price":2500.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-soundprojector25-white_53813_3_1_06275a52-9075-4988-8e81-d56b445c871b.jpg?v=1787090571"},{"product_id":"earthquaker-devices-hummingbird-v3","title":"EarthQuaker Devices Hummingbird V3","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Hummingbird V3\u003c\/strong\u003e is a choppy, sawtooth tremolo modeled on the vintage “repeat percussion” unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic “50’s style” shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet. The Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation! In addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost! The Hummingbird is all analog, true bypass and handmade one at a time on a gilded cloud in Akron, Ohio.\u003c\/p\u003e  \u003ch3\u003eControls\u003c\/h3\u003e  \u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e Controls amount of modulation from barely there to full signal chop at full bore.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eRate:\u003c\/strong\u003e Controls the speed of the LFO. Clockwise for faster, counterclockwise for slower.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eLevel:\u003c\/strong\u003e Controls the signal input level which ultimately controls the output level. Clockwise for more, counterclockwise for less.\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eMode:\u003c\/strong\u003e Three way toggle switch which selects the range of the oscillator. Mode 1 is slow, mode 2 is mid tempo and mode 3 is fast.\u003c\/p\u003e  \u003cp\u003eExpression Jack: Use an expression pedal to adjust the rate with your foot! When an expression pedal is in use the Rate control is defeated. The Moog EP-2 expression pedal. is recommended.\u003c\/p\u003e  \u003ch3\u003ePower\u003c\/h3\u003e  \u003cp\u003eThe pedals takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 10 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449858158695,"sku":"55939","price":131.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/eqd-hummingbird-v3_55939_1_6f023543-05d7-4225-ae53-b031e1c42fab.jpg?v=1787090720"},{"product_id":"earthquaker-devices-terminal-destructive-fuzz","title":"EarthQuaker Devices Terminal Destructive Fuzz","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Terminal Destructive Fuzz\u003c\/strong\u003e is a blown out, busted and all around destructive fuzz device modeled after the old JAX fuzz. For those not in the know, the JAX fuzz is a re-branded Shin Ei Companion fuzz that is well loved for its buzzy sound. The Terminal takes this design three steps further by allowing control over the gain, fine tuning of the EQ and a massive adjustable volume boost. The Voice controls the upper and lower mid range determining the over all frequency response while the Treble adjusts the biting top end. The Fuzz control goes from a gritty “separated” drive to a pinched, searing grind. Between these three interactive controls you will find a wide range of blistering fuzz tones at your disposal. Not only does the terminal rip on guitar, it’s one of the best bass fuzz pedals ever heard. Seriously, it rules on bass! The Terminal fuzz has all archaic analog circuitry, true bypass switching and is made one at a time by real human beans in Akron, Ohio.\u003c\/p\u003e  \u003ch3\u003eControls\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eVolume: Controls output volume level as you dial it clockwise.\u003c\/li\u003e \u003cli\u003eVoice: Clockwise for upper mids, counter clockwise for lower mids.\u003c\/li\u003e \u003cli\u003eTreble: Clockwise for more bite, counterclockwise for less.\u003c\/li\u003e \u003cli\u003eFuzz: Clockwise for more blow outs, counterclockwise for less.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMeasures\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 10 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449869824103,"sku":"40550","price":105.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-terminal-destructive-fuzz_40550_1_fbf64b72-65ff-42f5-8e07-f260c9e2ed82.jpg?v=1787090767"},{"product_id":"earthquaker-devices-dirt-transmitter-fuzz","title":"EarthQuaker Devices Dirt Transmitter Fuzz","description":"\u003cp\u003eIf you are looking to dirty your signal’s transmission, look no further than the \u003cstrong\u003eEarthQuaker Devices Dirt Transmitter Fuzzdriver\u003c\/strong\u003e. This silicon-based transistor fuzz circuit delivers classic tone with unrivaled versatility. At the heart of this fuzz device lies the Bias control, which limits the amount of current being fed to the transistors for a gated and velcro-like fuzz tone. It simulates the failing battery syndrome making your signal sputter out prematurely and provides for a grimier experience. Also useful, the Tone knob allows for a wide range of high frequency roll-off creating creamier tones. It also has an extremely low self-noise floor and loads of output gain on hand. Let the Dirt Transmitter add to your fuzz palette, you won’t be disappointed. The Dirt Transmitter is true bypass and handmade one at a time in the treetop village of Akron, Ohio. Measures 4.7″ x 3.7″ x 1.18\".\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eFuzz: Clockwise for heavier tones, counterclockwise for lighter tones.\u003c\/li\u003e \u003cli\u003eTone: Clockwise for a brighter, more cutting tone, counterclockwise to roll off top end for more mellow tones.\u003c\/li\u003e \u003cli\u003eBias: This is the heart of the Dirt Transmitter, where all of its voices can be found. It affects the voltage to the transistors which will create more gated velcro fuzz tones counter clockwise and thicker, natural fuzz tones clockwise. It is “properly biased” around 2 O’clock.\u003c\/li\u003e \u003cli\u003eLevel: Clockwise for more, counterclockwise for less.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthQuaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is always recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 3 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449914781799,"sku":"40543","price":123.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-dirt-transmitter_40543_1_cbc7166d-d4f1-4376-9845-76a876906765.jpg?v=1787090935"},{"product_id":"earthquaker-devices-ghost-echo-reverb","title":"EarthQuaker Devices Ghost Echo Reverb","description":"\u003cp\u003e\u003cstrong\u003eEarthQuaker Devices Ghost Echo Reverb\u003c\/strong\u003e ring reverb emulator is capable of providing a little atmosphere all the way through to vast depths in one tiny box. The attack control sets the delay of the initial pick attack on the wet signal only. When playing staccato this registers as a slap back type echo hitting the reverb but when playing fluid lines it adds a massive depth and “fattens” up the sound. The dwell control is a fine tune function that enhances the decay and the depth controls the intensity of the reverb. All analog dry path, true bypass and handmade one at a time in mystical Akron, Ohio. Measures 4 5\/8″ x 2 1\/2″ x 2.25″ with knobs.\u003c\/p\u003e  \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthQuaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is always recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 80 mA.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDepth: Sets reverb intensity\u003c\/li\u003e \u003cli\u003eDwell: Adjusts the length and thickness of the decay\u003c\/li\u003e \u003cli\u003eAttack: Sets the delay of the pick attack on the wet signal from 30ms-150ms\u003c\/li\u003e \u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449914814567,"sku":"40545","price":140.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-ghost-echo_40545_1_a30c9c00-0c0e-4ca6-a773-f3c3c636c0d3.jpg?v=1787090936"},{"product_id":"earthquaker-devices-hoof-reaper-octave-fuzz","title":"EarthQuaker Devices Hoof Reaper Octave Fuzz","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Hoof Fuzz\u003c\/strong\u003e is a germanium\/silicon hybrid fuzz which is based on character of the classic green Russian muff. It is capable of creating everything from dirty and organic overdrive to monstrous fuzz madness. It features a smooth, natural and harmonically rich sustain that is less associated with muff style fuzzes and has more in common with an overdriven amplifier. The Hoof Fuzz has some real clarity and distinctiveness that provides a tight and controlled signal that will surely be heard through the mix. The Shift control is secret weapon of the Hoof. It changes the frequency response of the tone control, primarily on the treble side, but it also diminishes any unnecessary muddiness on the bass side too. Scoop the mids or boost them- lots of tonal shaping options are on tap! The Hoof Fuzz has become a key pedal for TONS of well known artists in both the studio and on stage. All analog, true bypass and made one at time by human hands in Akron, Ohio (the center of the universe). Measures 4 5\/8″ x 2 1\/2″ x 2.25″ with knobs.\u003c\/p\u003e  \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eOur pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is always recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 3 mA.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eFuzz: Clockwise for heavy, counterclockwise for light\u003c\/li\u003e \u003cli\u003eTone: Bass to the left, Treble to the right\u003c\/li\u003e \u003cli\u003eLevel: Controls the output level\u003c\/li\u003e \u003cli\u003eShift: Adjust the mid content. Clockwise for classic scooped mids, counterclockwise for the more modern cutting mids all the kids love\u003c\/li\u003e \u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449914847335,"sku":"40546","price":250.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-hoof-reaper_40546_1_fb1c0004-2bd8-4dbd-ac69-dd1cd574521d.jpg?v=1787090936"},{"product_id":"earthquaker-devices-pitch-bay-dirty-polyphonic-harmonizer","title":"EarthQuaker Devices Pitch Bay Dirty Polyphonic Harmonizer","description":"\u003cp\u003eThe \u003cstrong\u003eEatherQuaker Devices Pitch Bay\u003c\/strong\u003e is a three part polyphonic harmonizer and distortion generator in one compact enclosure. It features two voices of adjustable polyphonic pitch shifting, one above the root and one below. Each voice can be adjusted by stepped semitones, from 1 semitone to 12 semitones (one full octave) above and below the root. Each voice (Pitch up, Pitch down and Root) has an adjustable mix control so they can be blended, cut or boosted to your hearts desire. The Pitch Bay also features an adjustable input gain that goes from clean to heavily distorted to unleash your inner hesher. This device has an all analog adjustable gain preamp, all analog signal path for the root, all digital pitch shifting engine and true bypass switching for activation. Each Pitch Bay is made one at a time by hand in the private beach front resort sector of Akron Ohio. Measures 4 5\/8″ x 2 1\/2″ x 2.25″ with knobs,\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003ePitch Up: Selects the upper harmony, 12 semitones starting at 1 above the root\u003c\/li\u003e \u003cli\u003ePitch Down: Selects the lower harmony, 12 semitones starting at 12 below the root\u003c\/li\u003e \u003cli\u003eGain: Turn clockwise to increase the gain\u003c\/li\u003e \u003cli\u003eUp: Level control for the upper harmony\u003c\/li\u003e \u003cli\u003eDown: Level control for the lower harmony\u003c\/li\u003e \u003cli\u003eRoot: Level control for the root note\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eOur pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. It is always recommended to use pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 100 mA.\u003c\/p\u003e  \u003ch3\u003eHelpful Tips:\u003c\/h3\u003e  \u003cp\u003eRun before any dirt or boost pedals. Works great on keyboards, bass, vocals, drum machines and just about anything else you can plug in!\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449914880103,"sku":"40549","price":225.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-pitch-bay_40549_1_14fa1636-b646-487e-bb92-a16cddc9f981.jpg?v=1787090936"},{"product_id":"earthquaker-devices-sea-machine-v2-chorus","title":"EarthQuaker Devices Sea Machine V2 Chorus","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Sea Machine\u003c\/strong\u003e is a chorus pedal with ultimate control over parameters rarely seen in a chorus. A hybrid of digital and analog circuitry with a slightly extended delay time allows it to really stand out and shimmer. The heart of the Sea Machine is a short digital delay line, which features controls for Animation, Dimension and Depth. The Animation allows control over the delay time, Dimension adjusts the amount of spatial regeneration and the Depth adjust the mix of the modulated wet signal against the dry analog signal. The LFO section of the Sea Machine is comprised of Rate, Intensity and Shape. The Rate adjusts the speed of the oscillator, the Intensity adjusts how much the LFO modulates the delayed signal and the Shape transforms the wave from a soft triangle to a hard square wave. EQD also included a small LED, which shows the speed and shape of the LFO, even in bypass. With this mix of standard and unique controls, everything from subtle warble, classic Leslie, seasick pitch bends to strangled alien sounds, stunted arpeggiations and many more far out sounds are on tap. The Sea Machine also was designed to work well following fuzz, distortion or overdrive without getting muddy, reducing volume or breaking up. When engaged, the transparent buffer leaves the all-analog dry signal unaltered and crystal clear. The Sea Machine is true bypass and made by human hands with the highest quality parts in shimmering Akron, Ohio.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eRate: Sets the speed of the LFO. The miniature LED will show the tempo even in bypass mode.\u003c\/li\u003e \u003cli\u003eShape: From soft triangle through hard square wave.\u003c\/li\u003e \u003cli\u003eDimension: Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an echo-resonance at max.\u003c\/li\u003e \u003cli\u003eIntensity: How much the LFO modulates the delay time.\u003c\/li\u003e \u003cli\u003eAnimate: How far the pitch shifted signal swings, lower levels equals a tighter and more focused shift à la traditional chorus. As you increase the control a more wild and animated pitch shift begins to emerge.\u003c\/li\u003e \u003cli\u003eDepth: How much modulated signal is blended in with the dry signal.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMeasures:\u003c\/h3\u003e  \u003cp\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/p\u003e  \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEQD pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. Always use a pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 50 mA.\u003c\/p\u003e  \u003cp\u003eFor best results, place after dirt pedals and before any signal boosters.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44449922744423,"sku":"57625","price":165.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-sea-machine-v2_57625_1_10170b6e-97fe-4547-bf17-eb55a846e914.jpg?v=1787090967"},{"product_id":"earthquaker-devices-transmisser-resonant-reverberations","title":"Earthquaker Devices Transmisser Resonant Reverberations","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Transmisser Resonant Reverberations\u003c\/strong\u003e is a modulated reverb with extra-long decay fed to a highly resonant filter. It is the sonic recreation of blowing your signal to bits, shooting it through a black hole then beaming it back down on a cloud of cosmic dust. It is a Blazar for musical instruments.\u003c\/p\u003e  \u003cp\u003eIf you can’t already tell, the Transmisser is not your every-day reverberation device. It does not do subtle. It does not do spring. It does not do a wood paneled rumpus room with 1” thick carpet. It will not recreate the classic sounds of the 60s, 70s and 80s. The Transmisser will create an ultimate soundscape-y backdrop to your all-night guitar freak-out. It’ll quickly turn you into a one note per minute knob twiddler. It’ll make you want to break out that dusty old expression pedal to do slow riding filter sweeps for days. It’ll get you out of that stupid ergonomic chair, close that flaptop computer and force you to enjoy playing music again and that’s the most important thing, am I right?\u003c\/p\u003e  \u003cp\u003eYou're gonna love what it does with your space.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eDecay: This controls how long the reverb trails last. Trails become longer as you turn this clockwise.\u003c\/li\u003e \u003cli\u003eDarkness: This controls the tone of the reverberated signal; darker clockwise, lighter counter-clockwise.\u003c\/li\u003e \u003cli\u003eFreq: The controls the frequency of the resonant filter that processes the reverberated signal. Higher clockwise, lower counter clockwise. This can also be controlled by an expression pedal through the jack located on the Eastern side. Tip= Wiper, Ring= 3.3v and Sleeve= ground. We highly recommend the Moog brand of expression pedals because they know what’s up.\u003c\/li\u003e \u003cli\u003eWarp: This is a system slew control. As you turn this control counter clockwise; the filter becomes deeper and more resonant, the decay becomes longer and warmer, the modulation grows wider and the whole system becomes more mellow. As you turn it clockwise, the whole system will tighten up and become more refined.\u003c\/li\u003e \u003cli\u003eRate: The Rate is hardwired for the optimum depth and controls the speed of the system-wide modulation in a narrow range that creates a sound far more unique than a simple modulated reverb. It is not only modulating the reverberation but also the Freq and Darkness within a small range that is dependent on where the Warp control is set. Faster clockwise and slower counter-clockwise.\u003c\/li\u003e \u003cli\u003eMix: This is the reverb blend control. It adjusts how much wet signal is blended with your dry. More clockwise, less counter-clockwise.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMeasures:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 70 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450044674151,"sku":"64668","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-transmisser_64668_1_8cfe46f0-7ceb-4147-a9ed-56cb8b1746c4.jpg?v=1787091455"},{"product_id":"earthquaker-devices-speaker-cranker-overdrive-v2","title":"EarthQuaker Devices Speaker Cranker Overdrive V2","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Speaker Cranker\u003c\/strong\u003e is an all discrete dirt enhancement device designed to give your signal some grit and a slight boost without drastically changing the character of your tone. It’s perfect for those that don’t like to fiddle with pesky controls yet want to add a little tube-like breakup or enhance an already over driven amp (or pedal) to give it some extra crunch without over loading the preamp. The single “More” control allows you choose the amount of break up you desire. Just like you would with a tube amp, back it off to thin out the sound and clean it up or crank it up for a fuller sound with a bit of compression. It’s an overdrive not a booster. All analog, true bypass and handmade one at a time in the pit of Akron, Ohio.\u003c\/p\u003e\u003cp\u003eThe V2 version now features top-mounted jacks and silent soft-touch relay based switching.  \u003c\/p\u003e\u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMore: Controls the amount of dirt\u003c\/li\u003e \u003c\/ul\u003e   \u003ch4\u003e### Dimensions:\u003c\/h4\u003e  \u003cul\u003e \u003cli\u003e4.37″ X 2.37″ X 1.5″ with knobs\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 2 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450044706919,"sku":"64667","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-speaker-cranker-v2_64667_1_8b0c00fd-425f-45d5-8798-79467ffcff68.jpg?v=1787091455"},{"product_id":"earthquaker-devices-dispatch-master-delay-and-reverb-v2","title":"EarthQuaker Devices Dispatch Master Delay and Reverb V2","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Dispatch Master\u003c\/strong\u003e has grown to be one of the most popular and versatile delay\/reverb pedals on the market. Loved for both its small size and lush sound, the Dispatch Master is capable of producing up to 1.5 seconds of delay time with near-infinite repeats and a cavernous reverb. The delay signal is clear and strong with no after effects or signal degradation and the repeats decay into a nice ambient swell with no oscillation. The reverb is MASSIVE and is sure to please those who love our Ghost Echo but want more modern depth and less artifacts. Both effects can be run separately or in unison. When using the reverb with no delay, the repeats control can be used to thicken up the reverb and give it more dimension. The Dispatch Master features a digital delay and reverb line with an all analog direct signal path and true bypass switching.\u003c\/p\u003e\u003cp\u003eThe V2 version features top-mounted jacks and silent soft-touch relay based switching.\u003c\/p\u003e   \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eTime: Sets the delay time, from 0 ms to 1.5 seconds.\u003c\/li\u003e \u003cli\u003eRepeats: Controls the regeneration of the delayed signal. Also acts as a enhancer for the reverb. In reverb mode this will control the thickness, decay, depth and overall nature of the reverb.\u003c\/li\u003e \u003cli\u003eReverb: Clockwise for more reverb, counterclockwise for less.\u003c\/li\u003e \u003cli\u003eMix: Adjusts the over all level of the effected signal.\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eTo use as a reverb only, turn the time control all the way down and adjust the reverb and mix controls to taste. In this mode, the repeats control can be used to enhance the thickness, decay, depth and overall nature of the reverb. With the reverb control at its maximum setting, the repeats control will gradually overload the effect at higher settings.\u003c\/p\u003e  \u003cp\u003eTo use as a delay only, turn the reverb control all the way down and adjust the time, repeats and mix controls to taste.\u003c\/p\u003e  \u003cp\u003eTo use both effects in unison, adjust all controls to taste.\u003c\/p\u003e  \u003cp\u003eTrue bypass and hand made one at a time in landlocked Akron, Ohio.\u003c\/p\u003e  \u003ch3\u003eDimensions:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e4.37″ X 2.37″ X 1.75″ with knobs\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 60 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450044739687,"sku":"64666","price":169.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-dispatch-master-v2_64666_1_a22acc12-c9f7-4e94-a5e1-f210e9022dba.jpg?v=1787091455"},{"product_id":"earthquaker-devices-afterneath-otherworldy-reverb-v2","title":"EarthQuaker Devices Afterneath Otherworldy Reverb V2","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Afterneath\u003c\/strong\u003e is an otherworldly reverberation machine that uses a swarm of short delays to create wild and cavernous reverbs and scattered, short rhythmic delays with bizarre characteristics. The reverb created is beyond massive and goes well beyond the territory of most reverb pedals. The controls allow you to stretch, smudge, swell and even self-oscillate into messy ambient washes of sound. The Length control adjusts the decay of the reverb; anything from shorter hall through endless plate style reverbs can be achieved. The Reflect knob controls the regeneration, basically feeding the output back through to create an even deeper otherworldly dreamscape. The Drag control lets you pull the reverb through time by slowing down or speeding up the reverb. The Diffuse knob adds control over spread of the reverb ranging from identifiable attack to a wash of smooth reverb. The Dampen control adjusts the tone of the reverb, both stinging bright tones and warmer swell. The end result is an ethereal, ambient wash that goes from hall to an infinite glitched-out orchestra pit warming up in a canyon at the bottom of another canyon inside a well. The Afterneath is true bypass with an all digital reverb engine, all analog dry signal path and hand made one at a time by real living human beans in dimly lit Akron, Ohio.\u003c\/p\u003e\u003cp\u003eThe V2 version features silent soft-touch relay based switching.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eLength: Controls the decay length of the reverb.\u003c\/li\u003e \u003cli\u003eDiffuse: Adjusts the spread of the reverb. Sharper with more attack counter clockwise, more ambient and washy as you turn it clockwise.\u003c\/li\u003e \u003cli\u003eDampen: Clockwise for brighter tones, counter clockwise for darker tones.\u003c\/li\u003e \u003cli\u003eDrag: This digital reverb is made up of a bunch of short delays, this separates the delay lines creating a stuttering, pingy effect. This is the coolest control on the Afterneath, it is highly advised that you slowly turn this while you let notes ring out for a cool warped speed effect. More delay as you turn it counter clockwise, more reverb as you turn it clockwise.\u003c\/li\u003e \u003cli\u003eReflect: Controls the regeneration of the reverb, turn clockwise for more wash and echos, counterclockwise for less. This will self oscillate if turned up high.\u003c\/li\u003e \u003cli\u003eMix: Blends the wet signal into the dry. Though it does not actually go full wet, it will gradually lower the clean level as you turn it clockwise and give the appearance of full wet.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eDimensions:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knobs\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 65 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450044772455,"sku":"64665","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-afterneath_64665_1_b7bbccfa-693d-453c-806c-d07cd2a2673f.jpg?v=1787091455"},{"product_id":"earthquaker-devices-acapulco-gold-power-amp-distortion-v2","title":"EarthQuaker Devices Acapulco Gold V2 Power Amp Distortion Pedal","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Acapulco Gold\u003c\/strong\u003e is a dirt-simple power amp distortion device that's based on the vibe of a cranked Sunn Model T. You know what's awesome? Vintage Sunn Amplifiers. You know what else is awesome? Simplicity. One button, one knob. How loud would you like it? Just move the knob. This is the spirit of rock and roll. Quit turning knobs and play that guitar like you mean it.\u003c\/p\u003e  \u003cp\u003eWhile playing, you may want to try ignoring that suggestion and try fiddlin' with your guitar's volume and tone knobs as these can drastically affect the sound of the Acapulco Gold. The volume knob on your guitar cleans up the pedal nicely, but not too clean. At minimum guitar volume settings, the Gold imparts a hazy, Nashville-sounding spank to your tone. At just-barely-backed-off, the Gold turns into a raunchy overdrive. And of course when the guitar volume is completely open, the Gold roars like a Model T on the verge of explosion. It's not quite fuzz, but so close.\u003c\/p\u003e  \u003cp\u003eEach Acapulco Gold is made part by part, wire by wire, giant knob by giant knob with real, live human hands in Earthquaker's gilded factory located in Akron, Ohio, USA.\u003c\/p\u003e  \u003cp\u003eThe V2 version features silent soft-touch relay based switching.\u003c\/p\u003e  \u003ch3\u003eCONTROLS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eBig Knob: The big knob sets the output level, sometimes known as Volume.\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003ePLEASE BE CAREFUL! The Acapulco Gold is extremely loud!\u003c\/p\u003e  \u003ch3\u003eDimensions:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e4 5\/8″ x 2 1\/2″ x 2.25″ with knob\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePOWER:\u003c\/h3\u003e  \u003cp\u003eEarthquaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 30 mA.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450044805223,"sku":"64664","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-acapulco-gold-v2_64664_1_54114f3e-4dde-45b0-bd90-c79a74eb31ab.jpg?v=1787091455"},{"product_id":"earthquaker-sound-projector-white-demo-deal","title":"Earthquaker Sound Projector - White (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eEarthquaker Devices Sound Projector 25\u003c\/strong\u003e is a 25-watt linear Class A tube amp designed by Joe Golden of EarthQuaker Devices. This is the first amplifier offering from EarthQuaker Devices! It features a no nonsense volume, treble and bass interface and is a perfect platform for those who want a low wattage amp but still want a full spectrum tone. Don’t let the 25 watts fool you, due to its Class A design, this thing is LOUD!\u003c\/p\u003e  \u003cp\u003eThe preamp section of the Sound Projector 25 boasts 12AX7 preamp tubes and Jupiter Condenser Company capacitors (from right here in Ohio) for a classic well rounded sound. While it excels as a pedal platform at lower volume levels, it also offers up an impressive smooth and natural overdrive when cranked.\u003c\/p\u003e  \u003cp\u003eThe power amp section comes stock with KT66 power tubes. If that’s not your bag, it will support popular octal power tubes such as 6L6, EL34 and 6V6 due to its external bias test points and trim pot. Swapping power tubes is easy to do (even for a novice) and offers a wide variety of tones from a single amp! It also features a custom wound Heyboer power transformer and output transformer, solid state rectifier and a foot switchable gain boost as well as taps for 4, 8 or 16 ohm cabinets.\u003c\/p\u003e  \u003cp\u003eThe speaker cabinets are handmade out of high quality Baltic Birch with ultra rugged box joint construction and feature a partial open back design that delivers a powerful, full frequency response. They come stock with two 12” Celestion Vintage 30’s or custom paired Warehouse guitar speakers.\u003c\/p\u003e  \u003cp\u003eFrom the woodwork and tolex to the design and assembly, every piece of the Sound Projector 25 was done by loving hands at the EarthQuaker headquarters in Akron, Ohio.\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450061975655,"sku":"72063","price":1999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-soundprojector25-white_53813_3_1_1_4527262e-bd5a-4829-89bf-b49b63e38104.jpg?v=1787091529"},{"product_id":"earthquaker-devices-space-spiral-1","title":"EarthQuaker Devices Space Spiral","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Space Spiral\u003c\/strong\u003e is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a “dawn of digital” echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.\u003c\/p\u003e  \u003cp\u003eThe Space Spiral’s delay time ranges from a tight 30 ms to a fast and loose 600 ms. Can you imagine having 600 ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.\u003c\/p\u003e  \u003cp\u003eSpace Spiral... It’ll get you through the night.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eTime: Delay lime goes from 30 ms to 600 ms - clockwise for long and counterclockwise for short\u003c\/li\u003e \u003cli\u003eRepeats: Controls the regeneration of the delay signal - repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock - this oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold - these oscillations will last even when the pedal is in bypass mode\u003c\/li\u003e \u003cli\u003eMix: Blends the delay signal in with the dry - clockwise for more and counterclockwise for less\u003c\/li\u003e \u003cli\u003eDepth: Controls the desired amount of modulation - clockwise for more and counterclockwise for less\u003c\/li\u003e \u003cli\u003eShape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise\u003c\/li\u003e \u003cli\u003eRate: Controls the speed of the modulation - clockwise for fast and counterclockwise for short\u003c\/li\u003e \u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450074951783,"sku":"75386","price":165.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-space-spiral_75386_1a_76f97c69-1f9e-48c4-9d3d-9f1715dbe414.jpg?v=1787091589"},{"product_id":"earthquaker-devices-organizer-polyphonic-organ-emulator-v2","title":"EarthQuaker Devices Organizer V2 Polyphonic Organ Emulator","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Organizer\u003c\/strong\u003e is a polyphonic organ emulator designed to mimic the organ tones of yesteryear crossed with the highly unique “Guitorgan”. It has a warm and very analog feel with a hint of Leslie warble that is unlike other modern octave shifters. It is simple to dial in and tracks chords as well as single notes perfectly all over the neck on both guitar and bass. Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums… If it makes sound, the Organizer can handle it!\u003c\/p\u003e  \u003cp\u003eThe Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path. It is made by hand, one at a time in dirty Akron, Ohio.\u003c\/p\u003e  \u003cp\u003eThe Organizer has an output gain stage with no master control. When it’s idle, even with all knobs at zero, the will be about as much “white noise” as an average overdrive pedal with it’s gain at zero and the level set to unity. A minimal amount while idle is normal but it will not be noticeable during play. The sound will be more apparent in front of a gained up amp or other dirt\/gain\/boost pedals.\u003c\/p\u003e \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthQuaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Using pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies isalways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 65 mA.\u003c\/p\u003e     \u003cp\u003e*\u003cem\u003eNew features in the V2 version.\u003c\/em\u003e\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450075017319,"sku":"75385","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-organizer-v2-1_c83395ac-82b4-47c8-9a9f-358a3b9c34b0.jpg?v=1787091589"},{"product_id":"earthquaker-devices-levitation-reverb-v2","title":"EarthQuaker Devices Levitation V2 Reverb Pedal","description":"\u003cp\u003eIntroducing the \u003cstrong\u003eEarthQuaker Devices Levitation\u003c\/strong\u003e reverb, a pedal designed by EarthQuaker Devices in conjunction with the LEVITATION music festival! LEVITATION, founded as Austin Psych Fest in 2008, has become a way to honor and preserve Austin’s psychedelic rock heritage, and carry it into the future. EarthQuaker wanted to remain true to the theme of LEVITATION and decided to do a variation on the popular Ghost Echo pedal to honor the reverb-drenched tones synonymous with classic psych rock. The Levitation Reverb builds on the base sound found in the Ghost Echo but does away with the attack and dwell and adds control over tone, decay, atmosphere and length in their place. It is a vintage voiced reverb that aims to fit somewhere between dirty sixties chambers, classic spring, and the big, ringing plate reverbs of days gone by.\u003c\/p\u003e  \u003cp\u003eFour knobs and one switch control quite a bit more than you’d expect. Want a slap back small room sound? Set all of your controls to the minimum and use the mix to dial in the sound of room devoid of anything but a guitar and amp. Want to revel in infinite spatial oscillations? Flip the toggle to long, turn up the atmosphere and decay then tune out. Dial in a bright chiming slap back by turning the tone all the way counter clockwise and reducing the decay. For a rattling, full-bandwidth assault, dime everything and let ‘er rip.\u003c\/p\u003e  \u003cp\u003eEach Levitation Reverb is built entirely by hand in Akron, Ohio by EarthQuaker Devices.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eLength (Toggle): Broad stroke control for decay time - shorter to left, longer to the right.\u003c\/li\u003e \u003cli\u003eDecay: Controls the length of the reverb decay - longer clockwise, shorter counter clockwise\u003c\/li\u003e \u003cli\u003eAtmosphere: This is a harmonic regeneration control, it feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb - more atmosphere clockwise, less counter clockwise\u003c\/li\u003e \u003cli\u003eMix: This controls how much wet signal is blended in with the dry- more reverb clockwise, less counter clockwise\u003c\/li\u003e \u003cli\u003eTone: This is an input bandwidth control for the reverberated signal - all the way counter clockwise reduces all low end content to make a brighter reverb, turning counter clockwise allows more low end to pass through resulting in a fuller reverberated tone\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthQuaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Using pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies isalways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 50 mA.\u003c\/p\u003e      \u003cp\u003e*\u003cem\u003eNew features in the V2 version.\u003c\/em\u003e\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450075050087,"sku":"75384","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-levitation-v2-1_625bcaf4-3c15-4cf0-a6b6-375e23ac411a.jpg?v=1787091589"},{"product_id":"earthquaker-devices-hoof-germanium-silicon-fuzz-v2","title":"EarthQuaker Devices Hoof V2 Germanium\/Silicon Fuzz Pedal","description":"\u003cp\u003eWhat to say about the \u003cstrong\u003eEarthQuaker Devices Hoof\u003c\/strong\u003e that hasn’t already been said? EarthQuaker's flagship fuzz pedal can be found on thousands on pedaboards around the world and has rocked countless stages from stinky suburban basements to Madison Square Garden. Twice.\u003c\/p\u003e  \u003cp\u003eThe Hoof is loosely based on the classic green Russian muff-style fuzz circuit, and features a hybrid Germanium\/Silicon design, pairing maximum tone with maximum temperature stability not found in finicky and expensive vintage units. EarthQuaker hand-matches NOS Germanium transistors to exacting specifications for pedal-to-pedal consistency, taking the guesswork out of your fuzz purchase, and guaranteeing that your Hoof delivers the same smooth, natural, and harmonically rich sustain as all your friends’ Hoofs.  All your friends have Hoof fuzzes, right?\u003c\/p\u003e  \u003cp\u003eThe Hoof has a wide gain range, providing everything from dirty and organic amp-like overdrive, to monstrous fuzz madness. This, paired with the “Shift” control allows you total tonal access, as the “Shift” knob works with the “Tone” control to alter the overall frequency response of the Hoof.\u003c\/p\u003e  \u003cp\u003eUse the “Shift” to boost the highs for a glassy, cutting top-end; use it to cut out some low-mid mud; use it to add some thick stoner rock sludge; use it on bass; use it to combat the muff-style fuzz’s notorious “mid scoop;” use it however you’d like, just use it! The Hoof’s distinctive, fuzzy character is tight and controlled without sacrificing any “guts,” so to speak, so even the gnarliest fuzz tones will sit well in the mix.\u003c\/p\u003e  \u003cp\u003eThe Hoof fuzz is all-analog, true bypass, and built one-at-a-time by real life human beans with four fingers and a thumb waiting in line for the horsey rides at the rustic frontierland amusement park of Akron, Ohio, USA. (The Official Center of the Universe.)\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eFuzz: Clockwise for heavy, counterclockwise for light.\u003c\/li\u003e \u003cli\u003eTone: Bass to the left, Treble to the right.\u003c\/li\u003e \u003cli\u003eLevel: Controls the output level.\u003c\/li\u003e \u003cli\u003eShift: Adjust the mid content. Clockwise for classic scooped mids, counterclockwise for the more modern cutting mids all the kids love.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthQuaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Using pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies isalways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 3 mA.\u003c\/p\u003e     \u003cp\u003e*\u003cem\u003eNew features in the V2 version.\u003c\/em\u003e\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450075082855,"sku":"75383","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-devices-hoof-v2_75383_1_9fa7f37e-bbde-4f3f-aaad-91a6c57c1d66.jpg?v=1787091590"},{"product_id":"earthquaker-devices-cloven-hoof-silicon-fuzz-v2","title":"EarthQuaker Devices Cloven Hoof Silicon Fuzz V2","description":"\u003cp\u003eThe \u003cstrong\u003eEarthQuaker Devices Cloven Hoof\u003c\/strong\u003e is the Hoof’s evil twin. It looks a lot like the Hoof, only more, um... Cloven.\u003c\/p\u003e  \u003cp\u003eEarthQuaker has kept the tightness and clarity you loved about the Hoof, along with the wide range of fuzz sounds, and threw the rest away. NOS Germanium transistors? Nope! In their place, are a set of four specially selected Silicon transistors for cleaner cleans, higher gain, improved temperature stability, and a grittier, grindier, nastier fuzz tone with over 4x the gain of the original Hoof.  EarthQuaker has also replaced key resistors with NOS Carbon Comp components to sprinkle a little bit of vintage flavor into the Cloven Hoof’s searing fuzz fury. It’s like they always say, “In with the old, out with the new.”\u003c\/p\u003e  \u003cp\u003eThe “Tone” and “Shift” controls remain intact, only now they’re re-voiced for a smoother sweep, and more precise control over the Cloven Hoof’s beefy low-end. Speaking of low-end, have you heard this thing on bass? Wow. Try the Cloven Hoof on a bass guitar. Seriously. Trust us. You can still cut or boost the mids, and there’s still a metric ton of output on tap, just do us a favor, and for the love of all that’s Cloven, play this pedal with a bass guitar.\u003c\/p\u003e  \u003cp\u003eThe Cloven Hoof is the perfect solution for those of you who wish the Hoof had more low-end, higher gain, and was just a little bit Hoofier.\u003c\/p\u003e  \u003cp\u003eEach and every Cloven Hoof is one-hundred percent analog, true bypass, and built by qualified cowboys, cowgirls, and rodeo clowns in the organic, grass-fed, farm-to-table cattle ranch of Akron, Ohio, USA, y’all.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eFuzz: Clockwise for heavy, counterclockwise for light.\u003c\/li\u003e \u003cli\u003eTone: Bass to the left, Treble to the right.\u003c\/li\u003e \u003cli\u003eLevel: Use this control to make the Cloven Hoof louder or quieter.\u003c\/li\u003e \u003cli\u003eShift: This adjusts the mid content, clockwise for scooped mids, counterclockwise for boosted.\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eEarthQuaker pedals take a standard 9 volt DC power supply with a 2.1 mm negative center barrel. Using pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies is always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages! Current draw is 10 mA.\u003c\/p\u003e     \u003cp\u003e*\u003cem\u003eNew features in the V2 version.\u003c\/em\u003e\u003c\/p\u003e","brand":"EarthQuaker Devices","offers":[{"title":"Default Title","offer_id":44450075115623,"sku":"75382","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/earthquaker-cloven-hoof-v2-1_a124ee2e-3a85-4e43-926f-a44ca94c3264.jpg?v=1787091590"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/earthquaker-devices.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}