{"title":"Lavry Engineering","description":null,"products":[{"product_id":"lavry-4496-18-2-channel-mic-pre","title":"Lavry 4496-18 2-Channel Microphone Preamp","description":"\u003cp\u003eThe \u003cstrong\u003eMicPre\u003c\/strong\u003e provides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings. The unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra- low noise double shunt regulated for minimum noise and channel separation. Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology).\u003c\/p\u003e\n\u003cp\u003eIncluded is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain. Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up\/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.\u003c\/p\u003e\n\u003cp\u003eEach stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449244446823,"sku":"4680","price":1458.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/larvy_mic_pre_1.jpg?v=1787088288"},{"product_id":"lavry-black-mp-10","title":"Lavry Black MP-10 Two-Channel Microphone Preamp","description":"\u003cp\u003eLavry Engineering announces the release of the new \u003cstrong\u003eLavryBlack MP10\u003c\/strong\u003e stereo Microphone Preamplifier. As with all of Lavry Engineering’s products, the MP10 embodies Dan Lavry’s design philosophy of sonic transparency. With features like wide range digitally controlled analog gain circuitry, impedance switch, and balanced or unbalanced outputs, the MP10 offers flexibility and ease of integration into both home and studio recording environments. Precise gain settings from 20 to 75 dB’s give the MP10 enough range to easily accommodate low output ribbon microphones, or feed unbalanced “-10dBV” inputs using high output condenser microphones without loss of signal quality. The sonic performance rivals or exceeds that of much more expensive units, and is extremely consistent over the entire gain range. Accurate matching of the two channels also makes the MP-10 ideal for true stereo recording applications. \u003cbr\u003e\u003cbr\u003e\n\u003c\/p\u003e\u003cp\u003eThe housing is a “half-rack” enclosure with its own power supply, which operates on a wide range of AC power inputs from 90 to 264VAC at line frequencies of 40-63Hz. \u003cbr\u003e\u003cbr\u003eLavry’s Black Series includes the AD10 analog to digital converter which sets the standard for performance and quality in its price range while offering the unique Digital Alias-Free Emulation™ modes for tube and transformer sound. The DA10 stereo D\/A converter set new standards in performance and quality at a cost-effective price point. With optical digital I\/O, the AD10 and DA10 can easily be connected directly to most Macintosh computers for stereo applications. \u003cbr\u003e\u003cbr\u003eAn optional LavryBlack Rack Mount is available to mount two LavryBlack units side-by-side in a 19” 1u space.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449244512359,"sku":"10640","price":1430.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_mp_10.jpg?v=1787088288"},{"product_id":"lavry-4496-19-4-channel-mic-pre","title":"Lavry 4496-19 4-Channel Microphone Preamp","description":"\u003cp\u003eThe \u003cstrong\u003eMicPre \u003c\/strong\u003eprovides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings. The unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra- low noise double shunt regulated for minimum noise and channel separation. Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology).\u003c\/p\u003e\n\u003cp\u003eIncluded is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain. Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up\/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.\u003c\/p\u003e\n\u003cp\u003eEach stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449244479591,"sku":"4681","price":2426.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_4496-19.jpg?v=1787088288"},{"product_id":"lavry-mic-pre","title":"Lavry Two-Channel Microphone Preamp","description":"\u003cp\u003eThe \u003cstrong\u003eMicPre \u003c\/strong\u003eprovides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings. The unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra-low noise double shunt regulated for minimum noise and channel separation. Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology).\u003c\/p\u003e\n\u003cp\u003eIncluded is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain. Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up\/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.\u003c\/p\u003e\n\u003cp\u003eEach stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449244545127,"sku":"4689","price":968.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/larvy_mic_pre.jpg?v=1787088289"},{"product_id":"lavry-4496-20-2-ch-a-d-2-ch-mic-pre","title":"Lavry 4496-20 2-Channel A\/D and 2-Channel Mic Preamp","description":"\u003cp\u003eThe \u003cstrong\u003eMicPre\u003c\/strong\u003e provides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings. The unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra-low noise double shunt regulated for minimum noise and channel separation. Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology).\u003c\/p\u003e\r\n\u003cp\u003eIncluded is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain. Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up\/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.\u003c\/p\u003e\r\n\u003cp\u003eEach stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449255751783,"sku":"4682","price":2648.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-20_4682_1.jpg?v=1787088336"},{"product_id":"lavry-4496-21-2-ch-a-d-2-ch-mic-pre-2-ch-d-a","title":"Lavry 2 Ch A\/D \u0026 2 Ch Mic Pre \u0026 2 Ch D\/A (4496-21)","description":"\u003cp\u003eThe \u003cstrong\u003eMicPre\u003c\/strong\u003e provides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings. The unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra-low noise double shunt regulated for minimum noise and channel separation. Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology).\u003c\/p\u003e\r\n\u003cp\u003eIncluded is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain. Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a 2-digit gain setting display and up\/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.\u003c\/p\u003e\r\n\u003cp\u003eEach stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449255784551,"sku":"4683","price":3498.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-21_4683_1.jpg?v=1787088336"},{"product_id":"lavry-4496-22-4-ch-d-a-and-2-ch-mic-pre","title":"Lavry 4496-22 4-Channel A\/D and 2-Channel Mic Preamp","description":"\u003cp\u003eThe \u003cstrong\u003eMicPre\u003c\/strong\u003e provides state of the art noise performance that accommodates even the weakest microphone signals , and a wide input range for the strongest mic signals. Ultra-low distortions across the complete audio frequency band insure maximum signal transparency at all gain settings.\u003c\/p\u003e\r\n\u003cp\u003eThe unit is designed to yield a superior dynamic range even for high source resistance microphones. The transformer free input provides pure and transparent bass, yet it features state of the art in common mode rejection (for elimination of hum and interference pickup) exceeding transformer based units. Phantom power per channel is ultra- low noise double shunt regulated for minimum noise and channel separation. Each channel accommodates up to 21-70dB of gain in 1dB steps. The precision gain setting is solid and reliable (not based on the use of archaic rotary switch technology). Included is a 10dB pad for lower voltage analog interfaces. Activating the pad yields 11-60dB gain. Outside, the no-nonsense controls are extremely user-friendly. Each channel is equipped with a two-digit gain setting display and up\/down switch. The last gain settings are stored and will reappear at next use. A Gain Pad switch (per stereo pair) changes the gain range from 21-70dB to 11-60dB, for higher level inputs.\u003c\/p\u003e\r\n\u003cp\u003eEach stereo pair has a microphone selection switch (Condenser, Dynamic or Ribbon), for microphone load optimization. Setting to “condenser” activates the phantom power. Internal jumpers allow change from balanced to unbalanced outputs, and for disabling of the phantom for powered vintage mics.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449256210535,"sku":"8680","price":3528.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-22_8680_1.jpg?v=1787088338"},{"product_id":"lavry-4496-12-2-channel-a-d-and-d-a","title":"Lavry 2 Channel A\/D and D\/A (4496-12)","description":"\u003cp\u003eThe\u003cstrong\u003e \"LavryBlue\" Conversion System \u003c\/strong\u003eoffers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with two AD converters and two DA converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265320039,"sku":"4666","price":2500.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-12_4666_1.jpg?v=1787088367"},{"product_id":"lavry-4496-13-4-ch-a-d-2-ch-d-a","title":"Lavry 4 Ch A\/D \u0026 2 Ch D\/A (4496-13)","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with four AD converters and two DA converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265385575,"sku":"4667","price":3375.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-13_4667_1.jpg?v=1787088367"},{"product_id":"lavry-4496-14-6-ch-a-d-2-ch-d-a","title":"Lavry 6 Ch A\/D \u0026 2 Ch D\/A (4496-14)","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System \u003c\/strong\u003eoffers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with six AD converters and two DA converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265418343,"sku":"4668","price":4250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-14_4668_1.jpg?v=1787088367"},{"product_id":"lavry-4496-15-2-ch-a-d-4-ch-d-a","title":"Lavry 2 Ch A\/D \u0026 4 Ch D\/A (4496-15)","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with two AD converters and four DA converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES, Requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265451111,"sku":"4669","price":3380.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-15_4669_1.jpg?v=1787088367"},{"product_id":"lavry-4496-16-4-ch-a-d-4-ch-d-a","title":"Lavry 4 Ch A\/D \u0026 4 Ch D\/A (4496-16)","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with four AD converters and four DA converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to Word Clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265483879,"sku":"4670","price":4260.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-16_4670_1_97845cd4-a61c-44fd-b750-74480bf3cc02.jpg?v=1787088367"},{"product_id":"lavry-4496-17-2-ch-a-d-6-ch-d-a","title":"Lavry 2 Ch A\/D \u0026 6 Ch D\/A (4496-17)","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with two AD converters and six DA converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, Analog or Digital soft saturation and Acoustic Bit Correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES, Requires 2-5v amplitude into 75W, termination connected externally.\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265516647,"sku":"4671","price":4230.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-17_4671_1.jpg?v=1787088367"},{"product_id":"lavry-4496-4-2-channel-a-d","title":"Lavry (4496-4) 2 Channel A\/D","description":"\u003cp\u003eThe\u003cstrong\u003e \"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with two AD converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and Acoustic Bit Correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265549415,"sku":"4672","price":1650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-4_4672_1.jpg?v=1787088367"},{"product_id":"lavry-4496-5-4-channel-a-d","title":"Lavry (4496-5) 4 Channel A\/D","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with four AD converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz   - external sync input: Word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265582183,"sku":"4673","price":2560.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-5_4673_1.jpg?v=1787088368"},{"product_id":"lavry-4496-6-6-channel-a-d","title":"Lavry (4496-6) 6 Channel A\/D","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with six AD converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz External sync input: Word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265614951,"sku":"4674","price":3440.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-6_4674_1.jpg?v=1787088368"},{"product_id":"lavry-4496-7-8-channel-a-d","title":"Lavry (4496-7) 8 Channel A\/D","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System \u003c\/strong\u003eoffers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with eight AD converters.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, analog or digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externally lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: Word clock or AES- requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265647719,"sku":"4675","price":4320.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-7_4675_1.jpg?v=1787088368"},{"product_id":"lavry-4496-8-2-channel-d-a","title":"Lavry Engineering 4496-8 2-Channel DA Converter","description":"\u003cp\u003eThe \u003cstrong\u003eLavry Engineering 4496-8\u003c\/strong\u003e offers affordable high-end conversion and features. It is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, this system is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is outfitted with two channels of DA converters.\u003c\/p\u003e\r\n\u003cp\u003eThe DA is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non-standard frequencies.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265680487,"sku":"4676","price":1325.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-8_4676_1.jpg?v=1787088368"},{"product_id":"lavry-4496-9-4-channel-d-a","title":"Lavry (4496-9) 4 Channel D\/A","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is outfitted with four channels of DA converters.\u003c\/p\u003e\r\n\u003cp\u003eThe DA is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz External sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally. \u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog DA outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz\u003c\/li\u003e\r\n\u003cli\u003eBoth the AD and DA modules have only AES\/EBU digital I\/O - the analog section is all balanced XLR\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265713255,"sku":"4677","price":2190.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-9_4677_1.jpg?v=1787088368"},{"product_id":"lavry-4496-10-6-channel-d-a","title":"Lavry (4496-10) 6 Channel D\/A","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is outfitted with six channels of DA converters.\u003c\/p\u003e\r\n\u003cp\u003eThe DA is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz  - external sync input: word clock or AES, Requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog DA outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz\u003c\/li\u003e\r\n\u003cli\u003eBoth the AD and DA modules have only AES\/EBU digital I\/O - the analog section is all balanced XLR\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265746023,"sku":"4678","price":3000.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-10_4678_1.jpg?v=1787088368"},{"product_id":"lavry-4496-11-8-ch-d-a","title":"Lavry (4496-11) 8 Ch D\/A","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is outfitted with eight channels of DA converters.\u003c\/p\u003e\r\n\u003cp\u003eThe DA is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eInternal crystal modes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003c\/li\u003e\r\n\u003cli\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003c\/li\u003e\r\n\u003cli\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz -  external sync input: word clock or AES - requires 2-5v amplitude into 75W, termination connected externally\u003c\/li\u003e\r\n\u003cli\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/li\u003e\r\n\u003cli\u003eAnalog DA outputs may be configured for balanced or unbalanced operation - this unit operates with AC power from 90 - 264 VAC, 50\/60 Hz\u003c\/li\u003e\r\n\u003cli\u003eBoth the AD and DA modules have only AES\/EBU digital I\/O - the analog section is all balanced XLR\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265778791,"sku":"4679","price":3850.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-4496-11_4679_1.jpg?v=1787088368"},{"product_id":"lavry-2-channel-a-d","title":"Lavry 2 Channel A\/D","description":"\u003cp\u003e\u003cspan style=\"color: #333333; font-size: small;\"\u003e\u003cspan id=\"internal-source-marker_0.10004042720231199\" style=\"font-family: Arial; background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eThe \u003c\/span\u003e\u003cspan style=\"font-family: Arial; background-color: transparent; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eLavry Two-Channel A\/D\u003c\/span\u003e\u003cspan style=\"font-family: Arial; background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003e is a two-channel module that converts analog audio to digital audio  with word lengths of 16, 20 or 24 bits at sample rates of 44.1, 48, 88.2  or 96kHz.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small; font-family: Arial; color: #333333; background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eA\/D  cards allow the selection of various word lengths, analog or digital  soft saturation and acoustic bit correction, dither and noise shaping.  Conversion may use internal  crystals or externally lock to Word Clock or AES signal.\u003c\/span\u003e\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265811559,"sku":"4684","price":880.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_2chad.jpg?v=1787088369"},{"product_id":"lavry-msync-kit","title":"Lavry MSync Kit","description":"\u003cp\u003eThe \u003cstrong\u003e\"LavryBlue\" Conversion System\u003c\/strong\u003e offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from two-channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies.\u003c\/p\u003e\r\n\u003cp\u003eA\/D cards allow the selection of various word lengths, Analog or Digital soft saturation and acoustic bit correction, dither and noise shaping. Other features include LED metering, reference meter bridge, peak detection and front panel gain control. Conversion may use internal crystals or externaly lock to word clock or AES signal.\u003c\/p\u003e\r\n\u003cp\u003eThe D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.\u003c\/p\u003e\r\n\u003cp\u003eAnalog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation.\u003c\/p\u003e\r\n\u003cp\u003eThis system may be ordered in several A\/D and D\/A configurations ranging from two to eight channels (up to four stereo channels) in each 1u 19\" rack mountable chassis. Other optional configurations include synchronous Up Sample\/Down sample converters and dual channel professional microphone preamps. This unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265844327,"sku":"4686","price":310.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_msync.jpg?v=1787088369"},{"product_id":"lavry-2-channel-da","title":"Lavry 2 Channel D\/A","description":"\u003cp\u003eThe \u003cstrong\u003eLavry M-DA 824\u003c\/strong\u003e is a 2-Channel DAC module for the LavryBlue 4496 System.\u003cbr\u003e\u003cbr\u003eEach 4496 Chassis can hold up to 4 of these modules - for a maximum of 8 channels. Installation of the M-DA 824 module into the LavryBlue chassis is a simple operation which can be done by the user with common tools.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSuitable For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTracking\u003c\/li\u003e\n\u003cli\u003eLocation Recording\u003c\/li\u003e\n\u003cli\u003eMixing\u003c\/li\u003e\n\u003cli\u003eOverdubs\u003c\/li\u003e\n\u003cli\u003eMastering\u003c\/li\u003e\n\u003cli\u003eBroadcast\u003c\/li\u003e\n\u003cli\u003eLive\/Location Sound\u003c\/li\u003e\n\u003cli\u003ePost Production\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265877095,"sku":"4685","price":850.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_2chda.jpg?v=1787088369"},{"product_id":"lavry-chassis","title":"Lavry Chassis","description":"\u003cp\u003eThe \u003cstrong\u003eChassis\u003c\/strong\u003e contains a power supply (equipped with significant output power noise filters). It provides room for up to four modules (printed circuit boards). Each module is a two-channel unit, thus providing up to eight channels of conversion or processing.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265909863,"sku":"4688","price":490.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_chassis.jpg?v=1787088369"},{"product_id":"lavry-ad122-96-mkiii","title":"Lavry AD122 96-MKIII","description":"\u003cp\u003eThe \u003cstrong\u003eLavry AD122-96MKIII \u003c\/strong\u003econverts analog signals to a true 24-bit digital audio data stream. Consistently used for many of today's top recordings, the AD122-96MKIII features -127 dB dynamic range (unweighted), providing optimum musical results. \u003cbr\u003e\u003cbr\u003e\r\n\u003c\/p\u003e\u003cp\u003eAchieving 20 or more bits of resolution places a heavy demand on the linearity and noise of analog signals prior to the A\/D conversion.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLinearity\u003c\/strong\u003e\u003cbr\u003e Linearity problems (typically associated with larger signals) should be avoided to prevent overall signal distortions. Proper circuit design places non-linear devices inside a negative feedback path, thus allowing the transfer function to depend on a few linear components (such as resistor ratio). Closer examination reveals that the effectiveness of negative feedback is limited by the open loop gain of the amplifier (the available gain prior to the feedback action). Constructing a 10 dB gain stage out of, say, a 50 dB open loop amplifier provides 40 dB of feedback; thus circuit nonlinearities are corrected for by a factor of 100. A 1% nonlinearity reduces to a .01% level. The same stage, when set to a gain of 20 dB, yields only 50-20=30 dB of \"linearizing power\"; thus the same 1% circuit nonlinearity is corrected to 1\/31.6 = .03%. The \"obvious\" solution of increasing circuit open loop gain is riddled with problems ranging from impulse response settling time to loss of bandwidth. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNoise\u003c\/strong\u003e\u003cbr\u003e The quantization (A\/D conversion) of analog noise causes loss of fine signal detail. The quantized noise introduces time varying signal dependent distortions. Such sample by sample deviation can not be compared to the seemingly \"constant\" analog background noise. The interaction between the noise and the quantization process effects the sonic detail at much higher amplitude than the noise level itself. The source material may have its own noise level, but the A\/D manufacturer is in no position to decide which part of the material is signal and which part is noise. (Is it undesirable noise or is it the intentional recording of the wind blowing through the trees?) Thus, any signal must be reproduced accurately. All we can do, and all we should do amounts to avoiding additional A\/D noise. A\/D noise consists of two parts: analog noise (prior to quantization), and quantization noise. The quantization noise level is \"fixed\" by the converter itself. Model AD122-96 MKIII quantization noise relative full scale is about 122 dBFS. Keeping complete system noise level at 122 dBFS requires careful treatment of the analog path. Each circuit component (especially resistors and semiconductors) generates its own noise. The complex electron motion within the various materials adds up to a cumulative noise. Intentional amplification of signals yields undesirable amplification of noise. Once again, each dB of added gain takes away a dB from the available dynamic range. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAD122-96 MKIII Input Range\u003c\/strong\u003e\u003cbr\u003e You may suspect by now that our aim is to provide you with an A\/D converter and leave the problem of providing a \"hot\" signal at the hands of microphone and mic- preamplifier manufacturers. Like many A\/D's, Model AD122-96 MKIII provides limited gain (0-11.5 dB).\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265942631,"sku":"4690","price":7500.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-ad122-96-mkiii_4690_1.jpg?v=1787088369"},{"product_id":"lavry-gold-da924","title":"Lavry Gold DA924","description":"\u003cp\u003eThe \u003cstrong\u003eLavry Gold DA924\u003c\/strong\u003e is an absolutely unique converter showcasing the innovative designs of the Lavry Engineering Think Tank. It features extremely small quantization steps, low noise performance, and introduces CrystalLock™ -- Lavry's jitter eliminator circuitry. Truly a reference standard. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449265975399,"sku":"4691","price":8500.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_da_924.jpg?v=1787088369"},{"product_id":"lavry-le3000s","title":"Lavry 3000S Digital Optimizer","description":"\u003cp\u003eThe \u003cstrong\u003eLavry 3000S Digital Optimizer\u003c\/strong\u003e is a powerful multi-function digital audio processor for sample rate\/word length conversion, monitoring, and measurement. It includes multiple dither and noise shaping settings, and reference quality metering. This unit is a boon to any high-throughput mastering studio - saving time and increasing quality.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449266008167,"sku":"4692","price":5200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_3000s_front.jpg?v=1787088369"},{"product_id":"lavry-black-da-10","title":"Lavry Black DA-10","description":"\u003cp\u003eIntroducing the \u003cstrong\u003eLavryBlack DA10\u003c\/strong\u003e, a new stand alone stereo digital to analog converter. The half rack unit can receive AES or SPDIF digital audio on XLR, RCA and optical link.\u003c\/p\u003e\n\u003cp\u003eThe DA provides three Clock modes. The preferred modes are CrystalLock ™ and Narrow Lock modes, but the unit also offers a Wide lock mode based on an internal Sample rate conversion for listening at non standard sampling rates.\u003c\/p\u003e\n\u003cp\u003eThe level of the analog outputs (balanced or unbalanced) is controlled by an up–down switch and a two-digit display. The “potentiometer free” discrete analog attenuator provides up to 60dB very high precision volume control in 1 dB steps.\u003c\/p\u003e\n\u003cp\u003eA state of the art discrete headphone driver is capable of accommodating at ease even the lowest impedance headphones. The unit includes a polarity switch, and a stereo-mono switch, a feature aimed at mastering studios.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449276100711,"sku":"6325","price":1148.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_da_10_1.jpg?v=1787088403"},{"product_id":"lavry-black-ad-10","title":"Lavry Black AD-10","description":"\u003cp\u003eLavry Engineering Inc. is proud to announce the latest addition to its product line, the stereo \u003cstrong\u003eLavryBlack AD10 A\/D Converter\u003c\/strong\u003e. Ideal for a wide range of recording and broadcast applications, the Lavry Black AD-10 builds on founder Dan Lavry's reputation for extreme transparency with a number of innovative new features for highest-quality sound, flexibility and ease of use. \u003cbr\u003e\u003cbr\u003eLavryBlack AD10 sees the introduction of Lavry Engineering's unique Digital Alias-Free Emulation™ modes. With this exclusive system, in addition to Clear mode users can select the input characteristic of Tube, Transformer or both (Complex). \"The AD10 marks the first time that a Lavry Engineering unit has offered this type of option,\" explains Dan Lavry, President of Lavry Engineering. \"With AD10, very high accuracy and transparency remain the starting point. However, the engineer can also alter the original signal if they choose.\" \u003cbr\u003e\u003cbr\u003eIn addition to a myriad of functions, the LavryBlack AD10 is accessible via user-friendly interface controlled by a single toggle switch. This switch utilizes multiple displays for heightened efficiency within the compact ½ rack enclosure.\u003c\/p\u003e\n\n\u003cp\u003eIntroduction of AD10 extends Lavry's Black Series which began with the highly popular DA10. This stereo D\/A converter set new standards in performance and quality at a cost-effective price point.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449300873319,"sku":"9170","price":1150.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_ad_10_1.jpg?v=1787088465"},{"product_id":"lavry-engineering-lavryblack-rack-kit","title":"Lavry Black Rack Kit","description":"\u003cp\u003eThe \u003cstrong\u003eLavry Engineering Black RM-Kit\u003c\/strong\u003e is designed for mounting two Lavry Black series units together into a single rackspace.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449301463143,"sku":"9295","price":37.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_black_rack_kit_7cd9a1fe-3738-4a61-b961-207421d3095d.jpg?v=1787088466"},{"product_id":"lavry-black-da-11","title":"Lavry Black DA-11","description":"\u003cp\u003eIn keeping with the Lavry Engineering tradition of innovation in the pursuit of excellence, the \u003cspan style=\"font-weight: bold;\"\u003eLavryBlack DA11\u003c\/span\u003e combines customer requested features with a flexible approach to controlling the stereo image. The patent pending \u0026gt;PiC\u0026lt; Playback Image Control™ allows the listener to adjust their position within the stereo sound field in a way that is unique to the DA11. Applications include adjusting the stereo width to create a headphone listening experience more like listening in a room with speakers, or moving the “sweet spot” with asymmetrical speaker placement.\u003cbr\u003e\u003cbr\u003eA full compliment of USB, XLR, RCA, and optical digital audio inputs offer flexibility in using computer, network music, or stand alone CD player sources, as well as studio equipment. Balanced and unbalanced output options are provided for ease in connection to a wide range of HiFi as well as professional audio gear.\u003cbr\u003e\u003cbr\u003eWith the addition of infrared remote capability, the DA11 allows the listener to easily control important functions from the listening position with the added benefit of working with most universal remotes. The remote Mute function controls both headphone and main outputs, while a separate main output on\/off setting makes private headphone listening convenient.\u003cbr\u003e\u003cbr\u003eLike the highly acclaimed LavryBlack DA10, the DA11 offers extreme transparency and musicality in DA conversion with the ability to control speaker volume using digitally controlled analog volume circuitry. This allows the DA11 to be connected directly to a power amp or powered monitors without a preamp for the ultimate in “straight-wire” listening. With unparalleled precision in channel matching throughout the volume range, this feature allows the listener to easily reset the volume to a known level for consistent enjoyment with minimal signal degradation. Like all other programmable settings, the Volume setting is retained in memory when the power is turned off.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra low jitter mode to minimize source degradation\u003c\/li\u003e\n\u003cli\u003ePatent pending \u0026gt;PiC\u0026lt; Playback Image Control™\u003c\/li\u003e\n\u003cli\u003eAccepts input sample rates between 30kHz and 200kHz\u003c\/li\u003e\n\u003cli\u003ePotentiometer-free digitally controlled analog volume circuitry\u003c\/li\u003e\n\u003cli\u003eHigh power discrete headphone output\u003c\/li\u003e\n\u003cli\u003eXLR, USB, RCA (Coaxial) and optical (Toslink) digital inputs\u003c\/li\u003e\n\u003cli\u003eOptional infrared remote control\u003c\/li\u003e\n\u003cli\u003ePower on\/off muting protection on main and headphone outputs\u003c\/li\u003e\n\u003cli\u003eBalanced or unbalanced outputs with polarity inversion\u003c\/li\u003e\n\u003cli\u003eIncluded XLR to RCA adapters for easy connection to RCA inputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449308147815,"sku":"10963","price":1480.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_da11_front.jpg?v=1787088494"},{"product_id":"lavry-2-channel-a-d-and-d-a-4496-12-demo-deal","title":"Lavry 2 Channel A\/D and D\/A (4496-12) (Demo Deal)","description":"The \"LavryBlue\" Conversion System offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with two (2) AD converters and two (2) DA converters. \u003cp\u003e A\/D cards allow the selection of various word lengths, Analog or Digital soft saturation and Acoustic Bit Correction, dither and noise shaping. Other features include LED metering, Reference meter bridge, Peak detection and front panel gain control. Conversion may use internal crystals or externally lock to Word Clock or AES signal. \u003c\/p\u003e\u003cp\u003e The D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies. \u003c\/p\u003e\u003cp\u003e \u003cb\u003eInternal crystal modes: \u003c\/b\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003cbr\u003e Narrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003cbr\u003e Wide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz External sync input: Word clock or AES, Requires 2-5v amplitude into 75W, termination connected externally. \u003cbr\u003e X2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449363755111,"sku":"14739","price":2199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_4496-12_1.jpg?v=1787088717"},{"product_id":"lavry-6-ch-a-d-2-ch-d-a-4496-14-demo-deal","title":"Lavry 6 Ch A\/D \u0026 2 Ch D\/A (4496-14) - (Demo Deal)","description":"The \"LavryBlue\" Conversion System offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with six (6) AD converters and two (2) DA converters. \u003cp\u003e A\/D cards allow the selection of various word lengths, Analog or Digital soft saturation and Acoustic Bit Correction, dither and noise shaping. Other features include LED metering, Reference meter bridge, Peak detection and front panel gain control. Conversion may use internal crystals or externally lock to Word Clock or AES signal. \u003c\/p\u003e\u003cp\u003e The D\/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D\/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies. \u003c\/p\u003e\u003cp\u003e Internal crystal modes: \u003cbr\u003e 44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003cbr\u003e Narrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003cbr\u003e Wide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz External sync input: Word clock or AES, Requires 2-5v amplitude into 75W, termination connected externally. \u003cbr\u003e X2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz) \u003c\/p\u003e\u003cp\u003e Analog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation. This unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449363787879,"sku":"16633","price":2795.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_4496-14_1.jpg?v=1787088717"},{"product_id":"lavry-4496-5-4-channel-a-d-demo-deal","title":"Lavry (4496-5) 4 Channel A\/D (Demo Deal)","description":"The \"LavryBlue\" Conversion System offers affordable high-end conversion and features. The LavryBlue system is suited for applications ranging from 2 channel recording and mastering to multitrack workstations, and surround sound applications. Versatile and flexible, the LavryBlue is field expandable as more tracks or capabilities are desired. This versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling frequencies. This unit is configured with four (4) AD converters. \u003cp\u003e A\/D cards allow the selection of various word lengths, Analog or Digital soft saturation and Acoustic Bit Correction, dither and noise shaping. Other features include LED metering, Reference meter bridge, Peak detection and front panel gain control. Conversion may use internal crystals or externally lock to Word Clock or AES signal. \u003c\/p\u003e\u003cp\u003e Internal crystal modes: \u003cbr\u003e 44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm \u003cbr\u003e Narrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003cbr\u003e Wide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz External sync input: Word clock or AES, Requires 2-5v amplitude into 75W, termination connected externally. \u003cbr\u003e X2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz) \u003c\/p\u003e\u003cp\u003e Analog A\/D inputs and D\/A outputs may be configured for balanced or unbalanced operation. This unit operates with AC power from 90 - 264 VAC, 50\/60 Hz.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449363820647,"sku":"13941","price":2200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_4496-5_1.jpg?v=1787088718"},{"product_id":"lavry-ad122-96-mkiii-demo-deal","title":"Lavry AD122 96-MKIII (Demo Deal)","description":"The\u003cb\u003e Lavry AD122-96MKIII \u003c\/b\u003econverts analog signals to a true 24-bit digital audio data stream. Consistently used for many of today's top recordings, the AD122-96MKIII features -127dB dynamic range (unweighted), providing optimum musical results. \u003cbr\u003e\u003cbr\u003e Achieving 20 or more bits of resolution places a heavy demand on the linearity and noise of analog signals prior to the A\/D conversion. \u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003cb\u003eLinearity\u003c\/b\u003e\u003cbr\u003e Linearity problems (typically associated with larger signals) should be avoided to prevent overall signal distortions. Proper circuit design places non linear devices inside a negative feedback path, thus allowing the transfer function to depend on a few linear component (such as resistor ratio). Closer examination reveals that the effectiveness of negative feedback is limited by the open loop gain of the amplifier (the available gain prior to the feedback action). Constructing a 10dB gain stage out of, say, a 50dB open loop amplifier provides 40dB of feedback; thus circuit nonlinearities are corrected for by a factor of 100. A 1% nonlinearity reduces to a .01% level. The same stage, when set to a gain of 20dB, yields only 50-20=30dB of \"linearizing power\"; thus the same 1% circuit nonlinearity is corrected to 1\/31.6 = .03%. The \"obvious\" solution of increasing circuit open loop gain is riddled with problems ranging from impulse response settling time to loss of bandwidth. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eNoise\u003c\/b\u003e\u003cbr\u003e The quantization (A\/D conversion) of analog noise causes loss of fine signal detail. The quantized noise introduces time varying signal dependent distortions. Such sample by sample deviation can not be compared to the seemingly \"constant\" analog background noise. The interaction between the noise and the quantization process effects the sonic detail at much higher amplitude than the noise level itself. The source material may have its own noise level, but the A\/D manufacturer is in no position to decide which part of the material is signal and which part is noise. (Is it undesirable noise or is it the intentional recording of the wind blowing through the trees?) Thus, any signal must be reproduced accurately. All we can do, and all we should do amounts to avoiding additional A\/D noise. A\/D noise consists of two parts: analog noise (prior to quantization), and quantization noise. The quantization noise level is \"fixed\" by the converter itself. Model AD122-96 MKIII quantization noise relative full scale is about 122dBFS. Keeping complete system noise level at 122dBFS requires careful treatment of the analog path. Each circuit component (especially resistors and semiconductors) generates its own noise. The complex electron motion within the various materials adds up to a cumulative noise. Intentional amplification of signals yields undesirable amplification of noise. Once again, each dB of added gain takes away a dB from the available dynamic range. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eAD122-96 MKIII Input Range\u003c\/b\u003e\u003cbr\u003e You may suspect by now that our aim is to provide you with an A\/D converter and leave the problem of providing a \"hot\" signal at the hands of microphone and mic- preamplifier manufacturers. Like many A\/D's, Model AD122-96 MKIII provides limited gain (0-11.5dB).\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449363853415,"sku":"15740","price":6900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-ad122-96-mkiii_4690_1_1.jpg?v=1787088718"},{"product_id":"lavry-black-da-11-demo-deal","title":"Lavry Black DA-11 (Demo Deal)","description":"In keeping with the Lavry Engineering tradition of innovation in the pursuit of excellence, the \u003cspan style=\"font-weight: bold;\"\u003eLavryBlack DA11\u003c\/span\u003e combines customer requested features with a flexible approach to controlling the stereo image. The patent pending \u0026gt;PiC\u0026lt; Playback Image Control™ allows the listener to adjust their position within the stereo sound field in a way that is unique to the DA-11. Applications include adjusting the stereo width to create a headphone listening experience more like listening in a room with speakers, or moving the “sweet spot” with asymmetrical speaker placement.\u003cbr\u003e\u003cbr\u003eA full compliment of USB, XLR, RCA, and optical digital audio inputs offer flexibility in using computer, network music, or stand alone CD player sources, as well as studio equipment. Balanced and unbalanced output options are provided for ease in connection to a wide range of HiFi as well as professional audio gear.\u003cbr\u003e\u003cbr\u003eWith the addition of infrared remote capability, the DA 11 allows the listener to easily control important functions from the listening position with the added benefit of working with most universal remotes. The remote Mute function controls both headphone and main outputs, while a separate main output On\/Off setting makes private headphone listening convenient.\u003cbr\u003e\u003cbr\u003eLike the highly acclaimed LavryBlack DA10, the DA11 offers extreme transparency and musicality in DA conversion with the ability to control speaker volume using digitally controlled ANALOG volume circuitry. This allows the DA11 to be connected directly to a power amp or powered monitors without a preamp for the ultimate in “straight-wire” listening. With unparalleled precision in channel matching throughout the volume range, this feature allows the listener to easily reset the volume to a known level for consistent enjoyment with minimal signal degradation. Like all other programmable settings, the Volume setting is retained in memory when the power is turned “off.”\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eLavry DA11 Features:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eUltra low jitter mode to minimize source degradation.\u003c\/li\u003e\n\u003cli\u003ePatent Pending \u0026gt;PiC\u0026lt; Playback Image Control™.\u003c\/li\u003e\n\u003cli\u003eAccepts input sample rates between 30kHz and 200kHz\u003c\/li\u003e\n\u003cli\u003ePotentiometer-free digitally controlled analog volume circuitry.\u003c\/li\u003e\n\u003cli\u003eHigh power discrete headphone output.\u003c\/li\u003e\n\u003cli\u003eXLR, USB, RCA (Coaxial) and Optical (Toslink) digital inputs.\u003c\/li\u003e\n\u003cli\u003eOptional Infrared Remote control\u003c\/li\u003e\n\u003cli\u003ePower On\/Off muting protection on Main and Headphone outputs\u003c\/li\u003e\n\u003cli\u003eBalanced or unbalanced outputs with Polarity Inversion\u003c\/li\u003e\n\u003cli\u003eIncluded XLR to RCA adapters for easy connection to RCA inputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449363886183,"sku":"15987","price":1375.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_da11_1_1.jpg?v=1787088718"},{"product_id":"lavry-engineering-lavryblack-rack-kit-demo-deal","title":"Lavry Engineering LavryBlack Rack Kit (Demo Deal)","description":"Racks 2 DA-10 or AD-10 together to form one standard rack space","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449363951719,"sku":"15988","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_rack_kit_1.jpg?v=1787088718"},{"product_id":"lavry-black-ad-11","title":"Lavry Black AD-11","description":"\u003cp\u003eThe \u003cspan style=\"font-weight: bold;\"\u003eLavry Black AD11\u003c\/span\u003e stereo A to D converter offers USB connectivity, ideal for portable recording systems. Other features include built-in microphone preamplifiers with phantom power, large wide-range LED meters, and Lavry’s exclusive Digital Tape Saturation Emulation (“Soft Saturation”). All settings are controllable from the AD11’s front panel using a system similar to that of the companion D to A converter- the DA11. \u003cbr\u003e\u003cbr\u003eBuilding on Lavry’s long established reputation of making the most accurate AD converters available, the AD11’s no-compromise design offers substantial value at an affordable price. With converter and microphone preamplifier performance that exceeds other manufacturer’s stand-alone units, the AD11 combines musicality with functionality. The USB output is available in parallel with both XLR and RCA AES\/SPDIF digital audio outputs, so more than one recording or monitoring device can be fed directly from the AD converter. The MicPre function and phantom power are selectable on each channel, as well as the Soft Saturation and +4\/-10 level functions.\u003cbr\u003e\u003cbr\u003eLike the previous LavryBlack model AD10, the AD11 has “XLR-TRS combo jacks” for the analog inputs. When a balanced or unbalanced ¼” plug is inserted, 12 dB’s of fixed gain is automatically added to the front panel adjustable gain, to boost “-10” consumer level signals to “+4” professional level. Front panel line level input gain adjustment is available for each channel in 12 precise one dB steps. Additional gain in the range of 20 to 65 dB’s is provided for balanced low-impedance sources (typically microphone).\u003cbr\u003e\u003cbr\u003eThis makes it possible to record the “direct” signal from a guitar effects unit or keyboard at the same time as a vocal mic, with no more than the AD11 and a laptop! In addition to “dual monaural” recording; extremely precise matching between channels makes the AD11 equally well suited to high quality stereo Mastering applications or “true” stereo recording. Whether it’s home, on location, or professional studio- the AD11 is the right tool for the job!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecording at 44.1, 48, 88.2 or 96 kHz with 24 bit wordlength\u003c\/li\u003e\n\u003cli\u003eSuper-stable internal clock\u003c\/li\u003e\n\u003cli\u003eExternal clocking via word clock or AES sync\u003c\/li\u003e\n\u003cli\u003eBNC Word Clock output for synchronizing other gear to the AD11\u003c\/li\u003e\n\u003cli\u003eDigital output format selectable between AES\/EBU and IEC (SPDIF)\u003c\/li\u003e\n\u003cli\u003ePeak hold selectable on large wide range LED meters\u003c\/li\u003e\n\u003cli\u003eSoft Saturation for peak level control without time constants (allows signal to be compressed or limited without undesirable interaction due to different attack and release times)\u003c\/li\u003e\n\u003cli\u003eOptional rack mount kit (can be used to mount any combination of two Lavry Black units) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449382432871,"sku":"17125","price":1680.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_black_ad-11_c355166f-d077-4229-8397-2539c87b3aa8.jpg?v=1787088792"},{"product_id":"lavry-black-ad-11-demo-deal","title":"Lavry Black AD-11 (Demo Deal)","description":"\u003cp\u003eThe \u003cspan style=\"font-weight: bold;\"\u003eLavry Black AD11\u003c\/span\u003e stereo A to D converter offers USB connectivity, ideal for portable recording systems. Other features include built-in microphone preamplifiers with phantom power, large wide-range LED meters, and Lavry’s exclusive Digital Tape Saturation Emulation (“Soft Saturation”). All settings are controllable from the AD11’s front panel using a system similar to that of the companion D to A converter- the DA11. \u003cbr\u003e\u003cbr\u003eBuilding on Lavry’s long established reputation of making the most accurate AD converters available, the AD11’s no-compromise design offers substantial value at an affordable price. With converter and microphone preamplifier performance that exceeds other manufacturer’s stand-alone units, the AD11 combines musicality with functionality. The USB output is available in parallel with both XLR and RCA AES\/SPDIF digital audio outputs, so more than one recording or monitoring device can be fed directly from the AD converter. The MicPre function and phantom power are selectable on each channel, as well as the Soft Saturation and +4\/-10 level functions.\u003cbr\u003e\u003cbr\u003eLike the previous LavryBlack model AD10, the AD11 has “XLR-TRS combo jacks” for the analog inputs. When a balanced or unbalanced ¼” plug is inserted, 12 dB’s of fixed gain is automatically added to the front panel adjustable gain, to boost “-10” consumer level signals to “+4” professional level. Front panel line level input gain adjustment is available for each channel in 12 precise one dB steps. Additional gain in the range of 20 to 65 dB’s is provided for balanced low-impedance sources (typically microphone).\u003cbr\u003e\u003cbr\u003eThis makes it possible to record the “direct” signal from a guitar effects unit or keyboard at the same time as a vocal mic, with no more than the AD11 and a laptop! In addition to “dual monaural” recording; extremely precise matching between channels makes the AD11 equally well suited to high quality stereo Mastering applications or “true” stereo recording. Whether it’s home, on location, or professional studio- the AD11 is the right tool for the job!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecording at 44.1, 48, 88.2 or 96 kHz with 24 bit wordlength\u003c\/li\u003e\n\u003cli\u003eSuper-stable internal clock\u003c\/li\u003e\n\u003cli\u003eExternal clocking via word clock or AES sync\u003c\/li\u003e\n\u003cli\u003eBNC Word Clock output for synchronizing other gear to the AD11\u003c\/li\u003e\n\u003cli\u003eDigital output format selectable between AES\/EBU and IEC (SPDIF)\u003c\/li\u003e\n\u003cli\u003ePeak hold selectable on large wide range LED meters\u003c\/li\u003e\n\u003cli\u003eSoft Saturation for peak level control without time constants (allows signal to be compressed or limited without undesirable interaction due to different attack and release times)\u003c\/li\u003e\n\u003cli\u003eOptional rack mount kit (can be used to mount any combination of two Lavry Black units) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449472610407,"sku":"17775","price":1450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_black_ad-11_1_21d28bd4-9e8e-418a-a2f5-6b8909ee19a2.jpg?v=1787089086"},{"product_id":"lavry-lk-1-latency-killer","title":"Lavry LK-1 Latency Killer","description":"\u003cp\u003eThe \u003cstrong\u003eLK-1 Latency Killer\u003c\/strong\u003e is a specialty product; it does not fit into any standard category. It is for overdubbing work – latency free real time monitoring of DAW.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe basic concept is based on muting the playback of the recorded channel (on the DAW), and replacing it with the music signal before the AD conversion.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSuch signal replacement is not new, it has been done in studios utilizing mixers, headphone amplifiers and various gear for steering analog signals. The LK-1 offers a complete integrated solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe LK-1 offers a big advantage over mixers: There is no signal alteration and no coloration because the LK-1 output is hardwired to the input (no electronics in the signal path). Mixers place many additional circuits in the signal path.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConverter makers have been pushed to accommodate low latency. This comes at great sacrifices in audio quality. This is the tail wagging the dog. Some IC makers go as far as providing “switchable” digital filters (lower latency at lower quality or higher latency for higher quality). The LK-1 enables use of quality converters (no latency concerns).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFreedom from latency concerns enables use of large buffers, many plugins in series and even additional hardware in the signal path, with no limits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe user interface of the Latency Killer is designed for easy workflow. The learning curve is minimal. The hookup (with any digital system)  is easy and requires no additional hardware (other than a few cables).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe rotary settings are precise and repeatable. 3dB coarse and 1\/2dB fine steps for volume and thirteen positions for pan. The unit also offers 2 complete user defined presets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTwo separate headphone amplifiers (with individual volume control) accommodate different headphones and ear sensitivity. This is especially helpful when the musician and the DAW operator are not the same person.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe LK-1 also offers hookup to effect units (DDL and reverb are often used in overdubbing to help the musician hear themselves above the recorded music tracks). The effects channels only modify what is heard through the headphones and leave no marks on the recording tracks. However, there are optional feed-through outputs for effects to be recorded on separate tracks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449482440807,"sku":"29995","price":2840.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry_lk-1_5e79b456-08c4-4315-837b-85e8daec9513.jpg?v=1787089128"},{"product_id":"lavry-blue-4496-4-2-ch-a-d-used","title":"Lavry Blue 4496-4 2-Ch. A\/D (Used)","description":"The \"LavryBlue\" Conversion System offers affordable high-end conversion   and features. The LavryBlue system is suited for applications ranging   from 2 channel recording and mastering to multitrack workstations, and   surround sound applications. Versatile and flexible, the LavryBlue is   field expandable as more tracks or capabilities are desired. This   versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling   frequencies. This unit is configured with two (2) AD converters.\u003cbr\u003e\u003cbr\u003eA\/D   cards allow the selection of various word lengths, Analog or Digital   soft saturation and Acoustic Bit Correction, dither and noise shaping.   Other features include LED metering, Reference meter bridge, Peak   detection and front panel gain control. Conversion may use internal   crystals or externally lock to Word Clock or AES signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eInternal crystal modes: \u003cbr\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm\u003cbr\u003e  \u003cbr\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003cbr\u003e\u003cp\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz \u003cbr\u003e\u003c\/p\u003eExternal sync input: Word clock or AES, requires 2-5v amplitude into 75W, termination connected externally. \u003cbr\u003e\u003cbr\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003cbr\u003e\u003cbr\u003eAnalog   A\/D inputs and D\/A outputs may be configured for balanced or  unbalanced  operation. This unit operates with AC power from 90 - 264  VAC, 50\/60  Hz.","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449499054183,"sku":"30398","price":995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_lavry_blue_4496-4_2-ch_ad_cat_8f011192-0546-4f8e-957f-a5e2ebd19ffe.jpg?v=1787089215"},{"product_id":"lavry-blue-4496-2-ch-ad-2-ch-da-used","title":"Lavry Blue 4496 2-Ch. A\/D, 2-Ch. D\/A (Used)","description":"\u003cp\u003eNice clean example of this unit. configured with 2 channels of analog-to-digital and 2 channels of digital-to analog converters.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \"LavryBlue\" Conversion System offers affordable high-end conversion   and features. The LavryBlue system is suited for applications ranging   from 2 channel recording and mastering to multitrack workstations, and   surround sound applications. Versatile and flexible, the LavryBlue is   field expandable as more tracks or capabilities are desired. This   versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling   frequencies. This unit is configured with two (2) AD converters.\u003cbr\u003e\u003cbr\u003eA\/D   cards allow the selection of various word lengths, Analog or Digital   soft saturation and Acoustic Bit Correction, dither and noise shaping.   Other features include LED metering, Reference meter bridge, Peak   detection and front panel gain control. Conversion may use internal   crystals or externally lock to Word Clock or AES signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eInternal crystal modes: \u003cbr\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm\u003cbr\u003e \u003cbr\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical)\u003c\/p\u003e\n\u003cp\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz\u003c\/p\u003e\n\u003cp\u003eExternal sync input: Word clock or AES, requires 2-5v amplitude into 75W, termination connected externally. \u003cbr\u003e\u003cbr\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003cbr\u003e\u003cbr\u003eAnalog   A\/D inputs and D\/A outputs may be configured for balanced or  unbalanced  operation. This unit operates with AC power from 90 - 264  VAC, 50\/60  Hz.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449514881127,"sku":"31147","price":1495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_31147_1_0c8b81b5-f6e2-4989-972e-416f4cf983a8.jpg?v=1787089275"},{"product_id":"lavry-black-da-10-used","title":"Lavry Black DA-10 (Used)","description":"\u003cp\u003eThe LavryBlack DA10 is a stereo digital to analog converter that accepts stereo digital audio via XLR, RCA, and optical inputs and outputs line level analog audio. There is also a built-in headphone amplifier and front panel 1\/4\" headphone jack. A stepped analog Volume control adjusts both the main line output and the headphone output level.     \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\"Crystal\" Ultra low jitter PLL mode to minimize source degradation\u003c\/li\u003e\n\u003cli\u003e Accepts input sample rates between 30kHz and 200kHz\u003c\/li\u003e\n\u003cli\u003e Potentiometer-free digitally controlled analog volume circuitry\u003c\/li\u003e\n\u003cli\u003e High power discrete headphone output\u003c\/li\u003e\n\u003cli\u003e XLR, RCA (Coaxial) and Optical (Toslink) digital inputs\u003c\/li\u003e\n\u003cli\u003e Balanced or unbalanced outputs with Polarity Inversion\u003c\/li\u003e\n\u003cli\u003e Mono mode; useful in mixing and recording applications \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449525727335,"sku":"11001","price":795.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_lavry_black_da-10_front_5d0f1f73-bf80-443d-b236-7f6fee594a56.jpg?v=1787089316"},{"product_id":"lavry-black-ad-10-used","title":"Lavry Black AD-10 (Used)","description":"\u003cdiv id=\"product-description\" class=\"product-content\"\u003e\n\u003cp\u003eLavry Engineering Inc. is proud to announce the latest addition to its product line, the stereo \u003cstrong\u003eLavryBlack AD10 A\/D Converter\u003c\/strong\u003e.  Ideal for a wide range of recording and broadcast applications, the  Lavry Black AD-10 builds on founder Dan Lavry's reputation for extreme  transparency with a number of innovative new features for  highest-quality sound, flexibility and ease of use. \u003cbr\u003e\u003cbr\u003eLavryBlack  AD10 sees the introduction of Lavry Engineering's unique Digital  Alias-Free Emulation™ modes. With this exclusive system, in addition to  Clear mode users can select the input characteristic of Tube,  Transformer or both (Complex). \"The AD10 marks the first time that a  Lavry Engineering unit has offered this type of option,\" explains Dan  Lavry, President of Lavry Engineering. \"With AD10, very high accuracy  and transparency remain the starting point. However, the engineer can  also alter the original signal if they choose.\" \u003cbr\u003e\u003cbr\u003eIn addition to a  myriad of functions, the LavryBlack AD10 is accessible via  user-friendly interface controlled by a single toggle switch. This  switch utilizes multiple displays for heightened efficiency within the  compact ½ rack enclosure.\u003c\/p\u003e\n\n\u003cp\u003eIntroduction of AD10 extends Lavry's Black Series which began with  the highly popular DA10. This stereo D\/A converter set new standards in  performance and quality at a cost-effective price point.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449525760103,"sku":"26396","price":795.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_lavry_black_ad-10__53551_front_2ff555ea-bef6-4d0f-b647-6422fef23edc.jpg?v=1787089316"},{"product_id":"lavry-blue-4496-4-2-ch-a-d-52181-used","title":"Lavry Blue 4496-4 2-Ch. A\/D #52181 (Used)","description":"The \"LavryBlue\" Conversion System offers affordable high-end conversion   and features. The LavryBlue system is suited for applications ranging   from 2 channel recording and mastering to multitrack workstations, and   surround sound applications. Versatile and flexible, the LavryBlue is   field expandable as more tracks or capabilities are desired. This   versatile system gives you 44.1, 48, 88.2 or 96 kHz sampling   frequencies. This unit is configured with two (2) AD converters.\u003cbr\u003e\u003cbr\u003eA\/D   cards allow the selection of various word lengths, Analog or Digital   soft saturation and Acoustic Bit Correction, dither and noise shaping.   Other features include LED metering, Reference meter bridge, Peak   detection and front panel gain control. Conversion may use internal   crystals or externally lock to Word Clock or AES signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eInternal crystal modes: \u003cbr\u003e44.1kHz, 48kHz, 88.2kHz, 96kHz; All at +\/- 25ppm\u003cbr\u003e  \u003cbr\u003eNarrow lock range: 44.1kHz, 48kHz, 88.2kHz, 96kHz ; All at +\/- 100ppm minimum (+\/- 150ppm typical) \u003cbr\u003e\u003cp\u003eWide lock range: Low 37kHz - 52kHz, High 74kHz - 100kHz \u003cbr\u003e\u003c\/p\u003eExternal sync input: Word clock or AES, requires 2-5v amplitude into 75W, termination connected externally. \u003cbr\u003e\u003cbr\u003eX2 switch enables generation of double sampling speeds (74kHz - 100kHz) from normal rates (37kHz -50kHz)\u003cbr\u003e\u003cbr\u003eAnalog   A\/D inputs and D\/A outputs may be configured for balanced or  unbalanced  operation. This unit operates with AC power from 90 - 264  VAC, 50\/60  Hz.","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449551319143,"sku":"33228","price":1095.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_33228_1_06e44076-70e8-4c60-a794-0698e37bb3ec.jpg?v=1787089422"},{"product_id":"lavry-gold-ad122-96-mkiii-a-d-92511-used","title":"Lavry Gold AD122 96-MKIII A\/D #92511 (Used)","description":"Converts analog signals to a true 24-bit digital audio data stream. Consistently used for many of today's top recordings, the AD122-96MKIII features -127dB dynamic range (unweighted), providing optimum musical results. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFEATURES \u003cbr\u003e• 96kHz, 88.2kHz, 48kHz and 44.1kHz conversion frequencies \u003cbr\u003e• Unequalied detail and performance \u003cbr\u003e• True -127dB noise floor \u003cbr\u003e• 0.00005% Total Harmonic Distortion + Noise \u003cbr\u003e• Conversion to 24 bits \u003cbr\u003e• Built-in Acoustic Bit Correction re-dithering to 16-20 bit formats \u003cbr\u003e• Switchable digital soft-knee limiter, +3 or +6dB gain \u003cbr\u003e• Precision reference meter bridge \u003cbr\u003e• Fully programmable digital test tones for system alignment \u003cbr\u003e• AES and word clock external synchronization 40-51kHz, 88.2kHz, 96kHz \u003cbr\u003e• DC removal \u003cbr\u003e• Absolute Polarity Inversion \u003cbr\u003e• Multi-converter synchronization","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449557839975,"sku":"33235","price":4995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_lavry_gold_ad122_96-mkiii_a-d__92511_cat_9170fbeb-4e9d-4b70-b012-e48048ab3757.jpg?v=1787089451"},{"product_id":"db-technologies-lavry-4496-adc-50398-used","title":"DB Technologies \/ Lavry 4496 ADC #50398 (Used)","description":"Clean used example of this unit. Purchase price includes VK premium servicing with a 6 month warranty.","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449562394727,"sku":"33823","price":1475.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_33823_1_1e4a90b9-f1e9-4a83-8b1f-e7712a32ca69.jpg?v=1787089469"},{"product_id":"db-technologies-lavry-2-channel-122-a-d-1018-used","title":"DB Technologies \/ Lavry 2 Channel 122 A\/D #1018 (Used)","description":"Purchase price includes VK premium servicing with a 6 month warranty\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eEarly version of the Lavry Gold. Excellent used example of this unit.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449562427495,"sku":"33781","price":2650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_33781_1_dd144424-8fa1-41dd-9a8d-ac590254f5ed.jpg?v=1787089469"},{"product_id":"lavry-quintessence","title":"Lavry Quintessence Mixing and Mastering Stereo DA Converter","description":"\u003cp\u003eFor over 16 years, the Lavry DA924 has held the highest rank among converters on the market for accuracy, transparency, musicality, and dynamic range. The \u003cstrong\u003eLavry Quintessence \u003c\/strong\u003eperformance exceeds it in all these aspects while providing additional functionality.\u003c\/p\u003e\r\n\u003cp\u003eThis DAC includes dual stereo XLR outputs (Main and Monitor) with +18 and +24 dBu peak output levels. An intuitive push-button system and rotary knob controls analog Volume adjustment for the Monitor Output with a resolution of ¼ dB over an 80 dB range, and fine calibration of the Main outputs by 0.1 dB steps for a ±0.7 dB range.\u003c\/p\u003e\r\n\u003cp\u003eThe Quintessence has two AES and one SPDIF inputs, which accept standard sample rates from 44.1 kHz to 192 kHz. Switching between inputs recalls independent Monitor Volume settings from memory for ease of use and ABX comparison. Other features include BAL\/UNBAL, Mono, Polarity Inversion, and personalized illumination settings.\u003c\/p\u003e","brand":"Lavry Engineering","offers":[{"title":"Default Title","offer_id":44449568948327,"sku":"34863","price":8800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/lavry-quintessence-21_34863_1_cb8d9199-92a9-496e-8d49-b729667efbd0.jpg?v=1787089497"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/lavry-engineering.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}