{"title":"Mutec","description":null,"products":[{"product_id":"mutec-iclock","title":"Mutec iCLOCK","description":"\u003cp\u003eThe \u003cstrong\u003eMutec iClock\u003c\/strong\u003e’s principle operation is completely different to conventional products. The user, as a matter of priority, defines the clock rates and formats which have to be constantly available at the outputs without any disturbances   not depending on the incoming reference signals. Limitations regarding defined combinations of input and output clock signals do not exist.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe iClock's philosophy is addressed to provide the highest possible failure safety for all outgoing clock signals which is needed especially for broadcast stations or centralized clock distribution systems. With regards to this functionality up to 3 independent external references can be auto-detected and locked in a user-defined sequence without any phase-jumps or interruptions in the outgoing signals. This applies also to external clock frequency changes, e.g. from 44.1 kHz to 48.0 kHz or reference clock changes, e.g. from video to GPS or AES11. Even a manual change of the reference signal by replugging the clock lines at the input connectors is possible during operation!. If all external references are lost, the iClock synthesizes the outgoing clock signals based on the last incoming frequency constantly. This applies also if a reference signal drifts out of the lock range. If the absent reference clock returns the synthesizer will lock gradually again based on iClock's SoftReLock functionality which ensures interruption-free adjustments of all outgoing clock signals. In this case a continuously clock supply for all connected devices is guaranteed during any operation mode.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUsing DDS-coupled frequency generation and latest DSP-based filtering technologies in combination with an extremely low-jitter clock basis, the iClock eliminates the jitter of incoming reference signals completely. This ensures highest possible jitter attenuation for all outgoing clock signals. As a result the synchronization of connected devices is much more reliable and the sound quality of every AD\/DA converter will be increased significantly.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eIntelligence\u003c\/h3\u003e\r\n\r\n\u003cp\u003eFor today's A\/V productions a precision synchronization of the used audio and video equipment is imperative. To reach the maximum of accuracy for synchronization of audio and video equipment, iClock offers a unique, high-precision signal management. The phase relationships of all input and output signals will be observed and adjusted in real-time automatically, aligned to AES11-1997\/2003 and EBU R83-1996. This process reaches a control accuracy in the nanosecond range!\u003c\/p\u003e\r\n\r\n\u003ch3\u003eIntegration\u003c\/h3\u003e\r\n\r\n\u003cp\u003eDue to requirements of todays professional A\/V studios, iClock offers in its basic version a variety of clock outputs with variable adjustable parameters. In the case that often devices of different generations have to work together, especially the status bit settings of the AES11 and S\/P-DIF outputs are individually adjustable in different parameters.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAs for future standards of digital audio technologies iClock offers already today an unequalled variety of synchronizable and generatable Word Clock rates. On this occasion the system does not limit to the currently “highest” clock rate of 192.0 kHz, but it supports a total of 36 different clock rates up to 24.576 MHz(!). Included are so-called Super Clocks for Digidesign’s ProTools™ system as well as DSD and DXD clock rates for SACD mastering applications. Due to iClock’s unique principle of frequency generation all clock rates can be routed to the Word Clock outputs individually.\u003c\/p\u003e\r\n\r\n\u003cp\u003eiClock provides standardly all pull up and pull down factors for audio, video and film transfers. As well as a powerful a digital varispeed function. That can be used to accommodate a playback to the pitch of the singers voice or to generate new pull up\/pull down rates. As for simultaneous editing of PAL and NTSC based video material, a second video generator is available as an upgrade. Both generators are adjustable independently and can be locked to any accepted incoming reference signal. Furthermore an alarm interface is optionally available to observe different possible failure conditions, like reference clock loses or power supply loses, from a centralized location.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eInvestment into your Future\u003c\/h3\u003e\r\n\r\n\u003cp\u003eDue to its unique concept, iClock is not only oriented on current requirements of digital audio and video techniques. With their trend-setting features and software and hardware upgradability it is also usable for future technology standards. Thus iClock represents a long-term investment for every modern A\/V studio.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775091815,"sku":"36700","price":2015.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_iclock_front-2_c14ae5cc-8b1d-479a-98a4-f08fa1ec4038.jpg?v=1787090356"},{"product_id":"mutec-mc-2","title":"Mutec MC-2","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-2\u003c\/strong\u003e comes basically as an AES\/EBU distribution amplifier. Additionally AES\/EBU ID interfaces are available to offer conversions between both interface standards. Using latest PLL and conversion techniques, MC-2 processes digital audio signals aligned to AES3 and AES3 ID and reference sync signals aligned to AES11 and AES11 ID including all usual clock rates from 32 kHz to 192 kHz. Each interface standard offers one input whereas AES\/EBU can be distributed to 6 outputs and AES\/EBU ID to 2 outputs.\u003c\/p\u003e  \u003cp\u003eVarious operation modes enable the use of MC-2 in a wide range of applications. An input reference signal will be distributed to all outputs simultaneously. In this process, a conversion between the AES\/EBU and the AES\/EBU ID interfaces will be done automatically.\u003c\/p\u003e  \u003cp\u003eA supplied AES3 digital audio signal can be converted in realtime into an AES11 digital sync signal and distributed through all outputs. To keep the original AES3 signal for further use, the first output of the according interface standard can be switched to pass the original signal separately without any format changes.\u003c\/p\u003e  \u003cp\u003eThe voltage of the outputs of the AES\/EBU ID interface can be switched from standard 1V to 3V to enable very long cable runs.\u003c\/p\u003e  \u003cp\u003eMC-2 is mountable in a 19\" rack system by using our optional rack adapters. All functions can be set convenient from the front panel with help of a simple user interface. The device is shipped in a rugged aluminum housing and meets CE, UL and FCC, part 15, specifications.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775124583,"sku":"36714","price":689.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-2_front_ed9b8df5-685f-40a0-863a-d3fd67dee8f2.jpg?v=1787090357"},{"product_id":"mutec-mc-3-1-smart-clock-sd","title":"Mutec MC-3.1 SMART CLOCK SD","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-3 Smart Clocks\u003c\/strong\u003e are universal, digital audio and SD\/HD video sync reference clock generators.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eImprovement of the studio’s sound quality overall\u003c\/li\u003e \u003cli\u003eElimination of “Clicks and Pops” in digital audio recordings\u003c\/li\u003e \u003cli\u003eSynchronization of devices with different clock rates simultaneously\u003c\/li\u003e \u003cli\u003eGeneration of 7 lowest jitter basis Word Clock frequencies ranging from 32.0 kHz up to 192.0 kHz\u003c\/li\u003e \u003cli\u003eWord Clock outputs can be multiplied with factors x1, x2, x4 and x256 for a total of 15 different Word Clock frequencies\u003c\/li\u003e \u003cli\u003eFrequency accuracy in compliance with AES11, Grade 1\u003c\/li\u003e \u003cli\u003eGeneration of PAL\/NTSC + NTSC b\/w SD video sync signals as Black + Burst, composite sync or color bar with MC-3.1 Smart Clock SD\u003c\/li\u003e \u003cli\u003ePhase-synchronized generation of S\/PDIF and AES\/EBU blank frames\u003c\/li\u003e \u003cli\u003eAll adjustments are retained after power-down\u003c\/li\u003e \u003cli\u003eSimple, new user interface\u003c\/li\u003e \u003cli\u003eBuilt-in international power supply\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eMC-3 Smart Clock, MC-3.1 Smart Clock SD and MC-3.2 Smart Clock HD provide different lowest-jitter Clock signals for synchronization of AD\/DA converters, digital mixers, audio and video workstations and many other devices. All three device are successors of MUTEC‘s Smart Clock and Smart Clock av which were previously sold very successfully worldwide. The new MC-3 Smart Clocks offer enhanced jitter performance, higher flexibility, more outputs per unit and a new designed user interface. Based on the circuit design of MUTEC‘s well-known iClock, Redundant Multiple Clock Synthesizer and Video Reference Generator, the MC-3‘s signal qualities and function flexibilities achieve levels of performance, which are totally outstanding in their respective market ranges!\u003c\/p\u003e  \u003cp\u003eThe MC-3 Smart Clock offers 7 basis low-jitter Word Clocks from 32.0 kHz up to 192.0 kHz, which are then independently distributed to four clock output pairs with multipliers x1, x2 and x4 for a maximum clock rate of 768.0 kHz. For the synchronization of older Digidesign ProTools™ systems, the respective Word Clock frequencies can be transferred as Word Clock x 256 (also called Super Clock). AES\/EBU and S\/PDIF (optical + coaxial) blank frame sync signals are available from 32.0 kHz up to 192.0 kHz. Every Word Clock output pair as well as the AES\/EBU and S\/PDIF outputs can be set to a different clock rate, based on one common clock frequency. Thus, new devices with higher clock rates may be integrated into an existing studio set-up without difficulty. It is also possible to supply various workstations in the same room with different clock rates.\u003c\/p\u003e  \u003cp\u003eMC-3.1 Smart Clock SD offers same audio clock functionalities like MC-3 Smart Clock, but offers additionally a standard definition (SD) video reference generator for supporting PAL and NTSC SD video sync signals as Black?+?Burst or composite sync as well as the respective color bars. Two additional video outputs are available on the rear side of the housing. Thus, audio clocks and video references are all available at the same time to synchronize complete audio\/video facilities.\u003c\/p\u003e  \u003cp\u003eMC-3.1 auto-detects integer relationships between the adjusted video standard and basis clock rate. This applies especially when PAL is selected as video reference and the basis clock rate (WCLK BASIS) is set to 48.0kHz, 96.0kHz or 192.0kHz. In that case, the AES\/EBU and S\/PDIF generators use the video frame to lock the Z-preamble of the AES channel block start, aligned to AES11-1997\/2003 and EBU R83-1996.\u003c\/p\u003e  \u003cp\u003eThe design advantage of the Smart Clocks is their high-precision frequency generator, from which all clock signals are simultaneously derived. As a result, the individual clock signals generated are synchronized to each other in phase, and hence feature the same frequency accuracy and time base! The frequency generation is accurate to \u0026lt;±1ppm and thus complies with AES 11, Grade 1, as well as broadcast specifications.\u003c\/p\u003e  \u003cp\u003eFor larger equipment set-ups, which require more Word Clock or AES\/EBU clock outputs than are provided by the Smart Clocks, MUTEC offers a complementary Word Clock distributor which is called Distributor ws and an AES\/EBU signal distributor which is called: MC-2.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775190119,"sku":"36716","price":1050.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-3.1_556d6d45-6a70-4380-a04c-1f485191ce50.jpg?v=1787090357"},{"product_id":"mutec-iclockdp","title":"Mutec iCLOCKdp","description":"\u003cp\u003eThe \u003cstrong\u003eMutec iClock\u003c\/strong\u003e’s principle operation is completely different to conventional products. The user, as a matter of priority, defines the clock rates and formats which have to be constantly available at the outputs without any disturbances   not depending on the incoming reference signals. Limitations regarding defined combinations of input and output clock signals do not exist.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe iClock's philosophy is addressed to provide the highest possible failure safety for all outgoing clock signals which is needed especially for broadcast stations or centralized clock distribution systems. With regards to this functionality up to 3 independent external references can be auto-detected and locked in a user-defined sequence without any phase-jumps or interruptions in the outgoing signals. This applies also to external clock frequency changes, e.g. from 44.1 kHz to 48.0 kHz or reference clock changes, e.g. from video to GPS or AES11. Even a manual change of the reference signal by replugging the clock lines at the input connectors is possible during operation!. If all external references are lost, the iClock synthesizes the outgoing clock signals based on the last incoming frequency constantly. This applies also if a reference signal drifts out of the lock range. If the absent reference clock returns the synthesizer will lock gradually again based on iClock's SoftReLock functionality which ensures interruption-free adjustments of all outgoing clock signals. In this case a continuously clock supply for all connected devices is guaranteed during any operation mode.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUsing DDS-coupled frequency generation and latest DSP-based filtering technologies in combination with an extremely low-jitter clock basis, the iClock eliminates the jitter of incoming reference signals completely. This ensures highest possible jitter attenuation for all outgoing clock signals. As a result the synchronization of connected devices is much more reliable and the sound quality of every AD\/DA converter will be increased significantly.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eIntelligence\u003c\/h3\u003e\r\n\r\n\u003cp\u003eFor today's A\/V productions a precision synchronization of the used audio and video equipment is imperative. To reach the maximum of accuracy for synchronization of audio and video equipment, iClock offers a unique, high-precision signal management. The phase relationships of all input and output signals will be observed and adjusted in real-time automatically, aligned to AES11-1997\/2003 and EBU R83-1996. This process reaches a control accuracy in the nanosecond range!\u003c\/p\u003e\r\n\r\n\u003ch3\u003eIntegration\u003c\/h3\u003e\r\n\r\n\u003cp\u003eDue to requirements of todays professional A\/V studios, iClock offers in its basic version a variety of clock outputs with variable adjustable parameters. In the case that often devices of different generations have to work together, especially the status bit settings of the AES11 and S\/P-DIF outputs are individually adjustable in different parameters.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAs for future standards of digital audio technologies iClock offers already today an unequalled variety of synchronizable and generatable Word Clock rates. On this occasion the system does not limit to the currently “highest” clock rate of 192.0 kHz, but it supports a total of 36 different clock rates up to 24.576 MHz(!). Included are so-called Super Clocks for Digidesign’s ProTools™ system as well as DSD and DXD clock rates for SACD mastering applications. Due to iClock’s unique principle of frequency generation all clock rates can be routed to the Word Clock outputs individually.\u003c\/p\u003e\r\n\r\n\u003cp\u003eiClock provides standardly all pull up and pull down factors for audio, video and film transfers. As well as a powerful a digital varispeed function. That can be used to accommodate a playback to the pitch of the singers voice or to generate new pull up\/pull down rates. As for simultaneous editing of PAL and NTSC based video material, a second video generator is available as an upgrade. Both generators are adjustable independently and can be locked to any accepted incoming reference signal. Furthermore an alarm interface is optionally available to observe different possible failure conditions, like reference clock loses or power supply loses, from a centralized location.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eInvestment into your Future\u003c\/h3\u003e\r\n\r\n\u003cp\u003eDue to its unique concept, iClock is not only oriented on current requirements of digital audio and video techniques. With their trend-setting features and software and hardware upgradability it is also usable for future technology standards. Thus iClock represents a long-term investment for every modern A\/V studio.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775157351,"sku":"36701","price":2650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_iclock_dp_d2a72b7d-cb37-4489-a129-bce6ff544fab.jpg?v=1787090356"},{"product_id":"mutec-mc-3-2-smart-clock-hd","title":"Mutec MC-3.2 SMART CLOCK HD","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-3 Smart Clocks\u003c\/strong\u003e are universal, digital audio and SD\/HD video sync reference clock generators.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eImprovement of the studio’s sound quality overall\u003c\/li\u003e \u003cli\u003eElimination of “Clicks and Pops” in digital audio recordings\u003c\/li\u003e \u003cli\u003eSynchronization of devices with different clock rates simultaneously\u003c\/li\u003e \u003cli\u003eGeneration of 7 lowest jitter basis Word Clock frequencies ranging from 32.0 kHz up to 192.0 kHz\u003c\/li\u003e \u003cli\u003eWord Clock outputs can be multiplied with factors x1, x2, x4 and x256 for a total of 15 different Word Clock frequencies\u003c\/li\u003e \u003cli\u003eFrequency accuracy in compliance with AES11, Grade 1\u003c\/li\u003e \u003cli\u003eGeneration of PAL\/NTSC + NTSC b\/w SD video sync signals as Black + Burst, composite sync or color bar with MC-3.1 Smart Clock SD\u003c\/li\u003e \u003cli\u003ePhase-synchronized generation of S\/PDIF and AES\/EBU blank frames\u003c\/li\u003e \u003cli\u003eAll adjustments are retained after power-down\u003c\/li\u003e \u003cli\u003eSimple, new user interface\u003c\/li\u003e \u003cli\u003eBuilt-in international power supply\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eMC-3 Smart Clock, MC-3.1 Smart Clock SD and MC-3.2 Smart Clock HD provide different lowest-jitter Clock signals for synchronization of AD\/DA converters, digital mixers, audio and video workstations and many other devices. All three device are successors of MUTEC‘s Smart Clock and Smart Clock av which were previously sold very successfully worldwide. The new MC-3 Smart Clocks offer enhanced jitter performance, higher flexibility, more outputs per unit and a new designed user interface. Based on the circuit design of MUTEC‘s well-known iClock, Redundant Multiple Clock Synthesizer and Video Reference Generator, the MC-3‘s signal qualities and function flexibilities achieve levels of performance, which are totally outstanding in their respective market ranges!\u003c\/p\u003e  \u003cp\u003eThe MC-3 Smart Clock offers 7 basis low-jitter Word Clocks from 32.0 kHz up to 192.0 kHz, which are then independently distributed to four clock output pairs with multipliers x1, x2 and x4 for a maximum clock rate of 768.0 kHz. For the synchronization of older Digidesign ProTools™ systems, the respective Word Clock frequencies can be transferred as Word Clock x 256 (also called Super Clock). AES\/EBU and S\/PDIF (optical + coaxial) blank frame sync signals are available from 32.0 kHz up to 192.0 kHz. Every Word Clock output pair as well as the AES\/EBU and S\/PDIF outputs can be set to a different clock rate, based on one common clock frequency. Thus, new devices with higher clock rates may be integrated into an existing studio set-up without difficulty. It is also possible to supply various workstations in the same room with different clock rates.\u003c\/p\u003e  \u003cp\u003eMC-3.1 Smart Clock SD offers same audio clock functionalities like MC-3 Smart Clock, but offers additionally a standard definition (SD) video reference generator for supporting PAL and NTSC SD video sync signals as Black?+?Burst or composite sync as well as the respective color bars. Two additional video outputs are available on the rear side of the housing. Thus, audio clocks and video references are all available at the same time to synchronize complete audio\/video facilities.\u003c\/p\u003e  \u003cp\u003eMC-3.1 auto-detects integer relationships between the adjusted video standard and basis clock rate. This applies especially when PAL is selected as video reference and the basis clock rate (WCLK BASIS) is set to 48.0kHz, 96.0kHz or 192.0kHz. In that case, the AES\/EBU and S\/PDIF generators use the video frame to lock the Z-preamble of the AES channel block start, aligned to AES11-1997\/2003 and EBU R83-1996.\u003c\/p\u003e  \u003cp\u003eThe design advantage of the Smart Clocks is their high-precision frequency generator, from which all clock signals are simultaneously derived. As a result, the individual clock signals generated are synchronized to each other in phase, and hence feature the same frequency accuracy and time base! The frequency generation is accurate to \u0026lt;±1ppm and thus complies with AES 11, Grade 1, as well as broadcast specifications.\u003c\/p\u003e  \u003cp\u003eFor larger equipment set-ups, which require more Word Clock or AES\/EBU clock outputs than are provided by the Smart Clocks, MUTEC offers a complementary Word Clock distributor which is called Distributor ws and an AES\/EBU signal distributor which is called: MC-2.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775222887,"sku":"36717","price":1299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-3.2_front_4e440864-416d-4861-bc08-56965f74249a.jpg?v=1787090357"},{"product_id":"mutec-mc-3-3-smart-clock-vr","title":"Mutec MC-3.3 SMART CLOCK VR","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-3.3 Smart Clock VR\u003c\/strong\u003e is a universal and high accurate SD\/HD video sync master clock generator.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eSD video and HD tri-level syncs simultaneously available\u003c\/li\u003e \u003cli\u003eAll SD\/HD video reference signals are coupled to one AES11, Grade 1, reference clock (0.5 ppm)\u003c\/li\u003e \u003cli\u003eGenerates HD tri-level test patterns\u003c\/li\u003e \u003cli\u003eSupports Slow-PAL and NTSC b\/w\u003c\/li\u003e \u003cli\u003eBuilt-in international power supply\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eThe MC-3.3 Smart Clock VR provides different high-stable SD video and HD tri-level reference signals for simultaneous synchronization of SD\/HD video devices in television stations, video editing suits or film\/video copy studios. The unit offers extremely high flexibility, 12 outputs in total and a new designed, simple user interface.\u003c\/p\u003e  \u003cp\u003eThe SD video reference generator supports PAL 24\/25 fps and NTSC 29.97\/30 fps as Black + Burst, composite sync and color bar. The HD tri-level video reference generator offers 720p, 1080i and 1080p formats with various frames rates. Furthermore, MC-3.3 generates different HD tri-level test patterns as YPrPb component or RGB signals. The SD and HD video generators are independently adjustable at the same time. Phase relations of the generated signals will be recognized and tuned automatically. Thus, MC-3.3 Smart Clock VR offers a flexible solution for every video editing facility.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775255655,"sku":"36718","price":1049.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-3-3_p_565a3d8b-5d5a-482c-8a10-d3f39f715297.jpg?v=1787090357"},{"product_id":"mutec-mc-4","title":"Mutec MC-4","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-4\u003c\/strong\u003e is a high performance digital multichannel audio format and sampling rate converter for ADAT™, AES3 and S\/P-DIF.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eADAT™, AES\/EBU and S\/P-DIF interfaces working in one box\u003c\/li\u003e \u003cli\u003eFormat and sampling rate conversions up to 192.0 kHz\u003c\/li\u003e \u003cli\u003eSMUX2 and SMUX4 support for ADAT™conversions\u003c\/li\u003e \u003cli\u003eSignal improvement through audiophil-optimized PLL synthesizers\u003c\/li\u003e \u003cli\u003eExtremely flexible synchronization options\u003c\/li\u003e \u003cli\u003eSeparate AES11 reference clock input for e.g. broadcast use\u003c\/li\u003e \u003cli\u003eConverts standalone and bidirectionally with different sampling rates: X-SRC\u003c\/li\u003e \u003cli\u003e16 channel sampling rate conversion engine (SRC) for bidirectional conversions\u003c\/li\u003e \u003cli\u003eContinuous signal supply in absence of the reference audio or clock signal\u003c\/li\u003e \u003cli\u003eRuns standalone in all SRC operation modes without needing an external master clock reference\u003c\/li\u003e \u003cli\u003eAES11, Grade 1, internal reference clock (0.5 ppm)\u003c\/li\u003e \u003cli\u003eWord Clock output useable as master clock reference\u003c\/li\u003e \u003cli\u003eEasy configurable\u003c\/li\u003e \u003cli\u003eUser settings will be stored in FLASH memory after switching-off\u003c\/li\u003e \u003cli\u003eRack space saving ½ 19” case allowing for mounting two devices side by side in one rack unit\u003c\/li\u003e \u003cli\u003eBuilt-in international power supply\u003c\/li\u003e \u003c\/ul\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775288423,"sku":"36719","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-4_p_8254671c-a847-496b-a59c-ab5d72ce30cb.jpg?v=1787090358"},{"product_id":"mutec-mc-5","title":"Mutec MC-5","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-5\u003c\/strong\u003e is a flexible SD video + HD tri-level signal routing matrix and distributor.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eRouting matrix and signal distribution functionalities in one box\u003c\/li\u003e \u003cli\u003eCompatible to HD tri-level, PAL, NTSC, SECAM\u003c\/li\u003e \u003cli\u003eAccepts four independent video input signals simultaneously\u003c\/li\u003e \u003cli\u003eDistributes HD tri-level YPbPr component signals\u003c\/li\u003e \u003cli\u003eBuilt-in international power supply\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eThe MC-5 offers video signal routing and distribution for various signal standards and formats at the same time. As for this, the box provides 4 BNC inputs which can be routed individually to12 BNC outputs. A new designed, simple user interface enables this unit to be installed without training time. The MC-5 provides an ideal output expansion for MUTEC’s video products, e.g. iClock, iClockdp, MC-3.1, MC-3.2 and MC-3.3.\u003c\/p\u003e  \u003cp\u003eDue to its free assignable routing principle, the MC-5 is useable in a wide range of video applications. One input reference signal can be distributed to one, but also on up to 12 outputs. When inputing more signals the available number of outputs will be reduced accordingly. But due to the routing capabilities of MC-5, the number of the outputs for the individual input signals can be assigned free. Additionally, the unit offers a preset management which allows to store and to switch over 4 different settings of all outputs. So, MC-5 enables to configure the exact needed number of outputs for every video distribution application very easily.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775321191,"sku":"36720","price":689.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-5_p_5c79a0b1-8cd7-49b0-a927-b52326d757b7.jpg?v=1787090358"},{"product_id":"mutec-mc-6","title":"Mutec MC-6","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-6\u003c\/strong\u003e converts AES3, AES3id and S\/P-DIF digital audio stereo signals whereas uni- and bidirectional conversion modes are available. All signals can be processed up to 192.0 kHz. Based on latest FPGA designs, the MC-6 achieves levels of performance regarding its sound and signal quality, unique flexibility, clocking features and the 4 channel sampling rate conversion engine (SRC), which are outstanding in today’s industry!\u003c\/p\u003e  \u003cp\u003eThe enormous feature-set with various operation modes enables the use of the MC-6 in many studio applications. Generally, incoming digital audio signals are converted unidirectionally to all three audio formats simultaneously, with or without SRC functionality. If clock rate conversion is necessary, the SRC engine can be locked to Word Clock, AES11 (separate input available) and any digital audio input in both, uni- and bidirectional operation modes.\u003c\/p\u003e  \u003cp\u003eOne of the unique features of the MC-6 is its capability to lock two digital audio stereo sources with different clock rates and to convert their audio formats and clock rates bidirectionally in realtime with help of the X-SRC mode. Therefore, the unit includes a 4 channel SRC engine as a standard, whereas two audiophile-optimized PLL synthesizers secure best sound quality in all operations modes.\u003c\/p\u003e  \u003cp\u003eThe MC-6 extracts the master clocks out of each of the two incoming digital audio stereo streams and uses these clock references to synchronize the SRCs in front of each of the format-same outputs. Thus, the two digital audio sources are held permanently in sync to each other by the MC-6 without the necessity to lock any of the involved devices to an external master clock reference. This is especially useful when interconnecting two non-synchronized or non-synchronizable digital audio devices, each running on its own internal clock base.\u003c\/p\u003e  \u003cp\u003eAs further special feature, the MC-6 offers an internal, ultra low-jitter clock base with outstanding accuracy to which the SRCs can be locked to, if no external reference is available. Running the MC-6 in this mode, its Word Clock output can be used e.g. as master clock reference to synchronize any other digital audio device in the studio.\u003c\/p\u003e  \u003cp\u003eAdditionally, the MC-6 can be used for up-sampling of digital audio signals up to 96.0 kHz or even 192.0 kHz. This function is recommended for supplying DA converters. The up-sampling process eliminates possibly existing signal jitter and improves the audiophile quality overall.\u003c\/p\u003e  \u003cp\u003eThis all makes the MC-6 for sure a unique and the most flexible digital audio converter currently available in the pro-audio industry!\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775386727,"sku":"36721","price":1049.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-6_front_bc2c2e24-f6fd-4b18-9fa0-61c564b50528.jpg?v=1787090358"},{"product_id":"mutec-mc-3","title":"Mutec MC3+ Smart Clock - Silver","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC3+ Smart Clock\u003c\/strong\u003e is developed to significantly improve the audiophile quality of connected digital audio devices in two ways: At first by clocking devices with ultra-low-jitter Word Clock signals and secondly by aggressively re-clocking incoming digital audio signals.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eEnhancement of Sound Quality by high-resolution Audio Re-Clocking\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIt is widely known that a master clock changes the sound quality of digital audio devices more or less to a higher level. But carving out finest audio details in your recordings to reproduce individual instruments as clear as possible and to raise the precision of their positions within the spatial sound to a maximum is possible at best with high-resolution re-clocking of your digital audio material. That is what MUTEC's new audio re-clocking algorithms paired with the 1G-Clock technology perform in the MC-3+ Smart Clock. Thus, the sensing of the incoming audio is carried out with highest resolution which leads to ultimate precision during merging the audio data with the new ultra-low-jitter clock. The result is unparalleled richness of details and spatiality of the re-clocked audio material.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eThe real next Step in Audio Clock Generation\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWhile others argue for their products with standardly known technical aspects, MUTEC really sets the benchmark of digital audio clocking to a higher level using the proprietary 1G-Clock technology for the first time in the MC-3+ Smart Clock. Running a frequency synthesis on a specifically calculated high clock rate, eliminates completely typical jitter inducing artifacts which are present in all standardly implemented DDS processes. Additionally, we took a look around the clock generation circuit and developed totally new ultra-low-noise power supplies and PCB design rules aligned to high-speed communication technologies to virtually eliminate all electrical noise. Thus, the new 1G-Clock technology helps you to bring jitter down to an unique low level, which leads to unprecedented transparency in your audio recordings.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eUsability in Studio and Live Event Environments\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe new MC-3+ Smart Clock works not only as generator, but also as clock distributor. Unlike other products, the MC-3+ effectively regenerates incoming clock signals to higher purity as the signal source. This helps to stabilize already existing clock systems and improves the level of sound reproduction quality in your studio environment. In cases when the MC-3+'s digitally-compensated clock accuracy is not sufficient, it is possible to lock the system to references of higher accuracy like so-called Atomic clocks or GPS receivers to raise the timing accuracy to the highest possible level. Additional to that, for the use during live events or in mobile trucks, the MC-3+ features anytime-fail-safe clock generation in every state of operation. Entering the hold-over-mode and re-synchronization of returning clock references is carried out so smoothly that live recordings will surely not be affected. Thus, the new MUTEC MC-3+ Smart Clock ensures flawless synchronization of connected devices at any time, while enhancing the sound of your audio production impressively.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775353959,"sku":"36715","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc3-plus_492b0f7d-2a44-489f-a4e3-973937cc447e.jpg?v=1787090357"},{"product_id":"mutec-mc-7","title":"Mutec MC-7","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-7\u003c\/strong\u003e is a very flexible, high-performance Word Clock distribution amplifier and audio clock converter. In today’s studio environments, clock distribution is more significant as mostly assumed. Actually, a clock signal does more than only synchronizing digital audio devices, it does also influence the acoustical result of your recordings. Due to this, the MC-7 is designed to cover both aspects with excellence!\u003c\/p\u003e  \u003cp\u003eThe MC-7 converts and distributes Word Clock, AES3\/11 and S\/P-DIF signals. An incoming reference signal passes latest audiophile-optimized PLL circuits, to be distributed and output as low-jitter, high-quality clock signal, regardless of the condition of the reference signal. Thereby, connected audio devices will benefit from the MC-7’s signal regeneration abilities, which improve their sound qualities audibly.\u003c\/p\u003e  \u003cp\u003eFurthermore, the MC-7 functions as multiplier for the clock rate of the incoming reference signal. Therefore, the outputs can be individually multiplied by x1, x2, x4, which leads to a very wide range of possible output Word Clock rates from 32.0 kHz up to 768.0 kHz. This enables e.g. the contemporaneous output of an incoming 48.0 kHz reference signal with 96.0 kHz, 192.0 kHz and as so-called Digidesign Super Clock. A special ‘Pass’ functionality secures the availability of an incoming digital audio signal for further use.\u003c\/p\u003e  \u003cp\u003eFor live or broadcast use, a special ‘Hold’ functionality can be activated additionally with every operation mode. This function guarantees interruption-free output signal supply in cases when the external reference is of insufficient quality or lost completely. Thus, the MC-7 is predestined to be used as centralized clock stabilizer and distributor, where reliable signal availability is a must.\u003c\/p\u003e  \u003cp\u003eDue to its synchronization features and connection flexibility, the MC-7 offers unique possibilities to provide interconnections between digital audio devices on a reliable and useful basis. This all makes MC-7 for sure an unique and outstanding digital audio clock distributor and converter enabling to handle every clocking issue in your studio set-up with ease!\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775419495,"sku":"36722","price":689.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-7_front_60206e7d-3e1d-416f-9ccb-724abc2a949b.jpg?v=1787090358"},{"product_id":"mutec-mc-8","title":"Mutec MC-8","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-8 and MC-8.1\u003c\/strong\u003e are extremely flexible, high-performance 8 channel AES3-AES3id digital audio and sampling rate converters.The MC-8 converts and distributes unidirectionally AES3 to AES3id signals, whereas the MC-8.1 works in the opposite conversion direction. Both devices process digital audio signals up to 192.0 kHz in all operation modes. Based on latest FPGA designs, the MC-8 and MC-8.1 achieve levels of performance regarding their signal qualities, unique flexibilities, clocking features and their 8 channel sampling rate conversion engines (SRC), which are outstanding in today’s industry!\u003c\/p\u003e  \u003cp\u003eVarious operation modes enable the use of the MC-8 and MC-8.1 in many applications. Apart from the standard function to convert four individual AES3 or AES3id stereo signals into the appropriate other interface standard, the devices can also change the clock rates of the input signals between 32.0 kHz – 192.0 kHz at the same time. Additionally both MC-8 units offer signal distribution and splitting functions. Thus, only one input signal can be distributed to all four outputs and its clock rate can be converted at the same time into a different one. Or each of two independent input signals can be split to two outputs. Thus, the MC-8 or MC-8.1 works as double AES3 splitter, with or without sampling rate conversion\u003c\/p\u003e  \u003cp\u003eThe SRC engine is synchronizable to Word Clock, AES11, any digital audio input and the internal, low-jitter clock base in every operation mode. When using the MC-8 or MC-8.1 with their SRCs locked to an external reference, the built-in HOLD, or so-called \"fly-wheel\" function secures interruption-free audio conversions even in cases of an unstable or absent clock reference!\u003c\/p\u003e  \u003cp\u003eThis all makes the MC-8 and MC-8.1 for sure the most flexible and useful AES3 to AES3id digital audio converters allowing to handle any conversion application with ease.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775452263,"sku":"36723","price":699.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-8_front_ea6cdd85-8f35-437f-9f76-ce9c1e33db01.jpg?v=1787090358"},{"product_id":"mutec-mc-8point1","title":"Mutec MC-8.1","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-8 and MC-8.1\u003c\/strong\u003e are extremely flexible, high-performance 8 channel AES3-AES3id digital audio and sampling rate converters.The MC-8 converts and distributes unidirectionally AES3 to AES3id signals, whereas the MC-8.1 works in the opposite conversion direction. Both devices process digital audio signals up to 192.0 kHz in all operation modes. Based on latest FPGA designs, the MC-8 and MC-8.1 achieve levels of performance regarding their signal qualities, unique flexibilities, clocking features and their 8 channel sampling rate conversion engines (SRC), which are outstanding in today’s industry!\u003c\/p\u003e  \u003cp\u003eVarious operation modes enable the use of the MC-8 and MC-8.1 in many applications. Apart from the standard function to convert four individual AES3 or AES3id stereo signals into the appropriate other interface standard, the devices can also change the clock rates of the input signals between 32.0 kHz – 192.0 kHz at the same time. Additionally both MC-8 units offer signal distribution and splitting functions. Thus, only one input signal can be distributed to all four outputs and its clock rate can be converted at the same time into a different one. Or each of two independent input signals can be split to two outputs. Thus, the MC-8 or MC-8.1 works as double AES3 splitter, with or without sampling rate conversion\u003c\/p\u003e  \u003cp\u003eThe SRC engine is synchronizable to Word Clock, AES11, any digital audio input and the internal, low-jitter clock base in every operation mode. When using the MC-8 or MC-8.1 with their SRCs locked to an external reference, the built-in HOLD, or so-called \"fly-wheel\" function secures interruption-free audio conversions even in cases of an unstable or absent clock reference!\u003c\/p\u003e  \u003cp\u003eThis all makes the MC-8 and MC-8.1 for sure the most flexible and useful AES3 to AES3id digital audio converters allowing to handle any conversion application with ease.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775485031,"sku":"36724","price":699.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-8-1_p_a27c033b-cafa-40f6-a6ae-cdb551c3d1f9.jpg?v=1787090358"},{"product_id":"mutec-mc1-1","title":"Mutec MC-1.1+","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-1.1+\u003c\/strong\u003e is a unique piece of equipment to help you to convert problem-free between the most popular digital audio formats and interface standards: AES3 and S\/P-DIF. Due to lots of operations modes, we are sure that the MC-1.1+ will cover also your conversion needs between these two formats.\u003c\/p\u003e     \u003ch3\u003eHigh-Performance Audio Conversions in all Respects\u003c\/h3\u003e  \u003cp\u003eDue to the increasing number of devices with AES\/EBU or AES\/EBUid and S\/P-DIF interfaces found in every studio environment, often a problem of different transmission formats and interface standards occurs mostly when those devices should exchange their digital audio data. At this point the MC-1.1+ comes in and helps you to convert problem-free between the most popular digital audio formats and interface standards: AES3 and S\/P-DIF. Using latest low-jitter audio PLLs and a low-noise PCB circuit design, the MC-1.1+ not only converts, but also regenerates and improves your digital audio signal with clock rates up to 192.0 kHz. Thereby, the format conversion process does not only the necessary electrical conversion but also a real format conversion of the reference signals in compliance with the specifications standardized by the Audio Engineering Society (AES) and the International Electrotechnical Commission (IEC). This feature truly helps you to avoid incompatibility problems of the used signal formats between the connected devices during conversion. Thus, you can rely on professional conversions with help of the MC-1.1+ in all respects!\u003c\/p\u003e  \u003ch3\u003eOutstanding Flexibility\u003c\/h3\u003e  \u003cp\u003eVarious operation modes enable the use of the MC-1.1+ in many applications. Nearly every imaginable conversion between the involved formats is possible! Incoming digital audio signals are uni-directionally converted to four output formats at once, whereas every format offers two outputs for additional signal splittings. As for bidirectional format conversions, the MC-1.1+ provides real double circuitries which allow for the first time converting the formats of two signals even with different sampling rates at the same time. A special splitting mode offers to actively split four individual input signals to their respective double outputs simultaneously. The SCMS status of S\/P-DIF signals can be monitored and adapted in every operations mode. Thus, the MC-1.1+ offers highest flexibility to solve interconnections problems in your studio very easy and reliable!\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449775517799,"sku":"36713","price":449.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_mc-1.1plus_front_68feb558-1ac2-488e-b320-33f7f8ef0022.jpg?v=1787090358"},{"product_id":"mutec-mc-3-usb","title":"Mutec MC-3+ USB - Aluminum","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-3+ Smart Clock USB\u003c\/strong\u003e is setting a new benchmark for clocking technology and the reproduction of digital audio by uniquely combining an audiophile USB interface with an audio re-clocker in perfection! Particularly designed for the demands of high-end consumer audio, the device expands a new sonic universe with increased musicality, clarity, and precision. As such, the MC-3+USB will prove its worth in many audiophile listening rooms around the world.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449809891431,"sku":"54042","price":1149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc3-plus-usb_54042_1_e0939181-ece8-413a-b1f7-4f73406644aa.jpg?v=1787090512"},{"product_id":"mutec-mc-1-2-black-usb-audio-interface","title":"Mutec MC-1.2 USB Audio Interface - Black","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-1.2\u003c\/strong\u003e is a high-performance USB audio interface which converts from USB to AES3, AES3id and S\/P-DIF signals, and vice versa.\u003c\/p\u003e  \u003ch3\u003eUltimate Interconnectivity\u003c\/h3\u003e  \u003cp\u003eThe MC-1.2 enables for the first time bi-directional conversions between USB audio streams and digital audio signals like AES3, AES3id and S\/P-DIF. Therefore, the box does not only offer digital audio outputs, like most of the others, but also a full set of digital audio inputs for AES3, AES3id and S\/P-DIF with BNC, RCA and optical interfaces. Signals received at the USB port are converted to five digital audio outputs simultaneously, which allow the connection of multiple receivers at your computer. When selecting one of the digital audio inputs, the signal received is converted to an USB audio stream and sent into your computer. Both signal paths are able to work at the same time, presupposing equal sampling rates. This enables e.g. the simple connection of effect processors to your computer or the use of recording-equipment, whereat monitoring of recorded signals is possible through the computer during recording.\u003c\/p\u003e  \u003cp\u003eHigh-End DACs or music servers often use BNC interfaces for S\/P-DIF transfers, which is from an electrical point of view surely the best choice. With the MC-1.2, you can convert USB audio streams of every PC or laptop into the S\/P-DIF format and output that through BNC interfaces to drive High-End equipment easily. This can be done while having four further outputs available to feed e.g. digital headphone amplifiers or other devices for convenient listening.\u003c\/p\u003e  \u003ch3\u003eUSB Signal Regeneration and Improvement\u003c\/h3\u003e  \u003cp\u003eIt is known, that USB interconnections, respectively the transfer of digital audio via USB let most of the DACs not sound best. That actually applies also for higher-priced DACs. Using the digital inputs at DACs often results in a better sound. At this point, the MC-1.2 comes in and may help to convert your USB audio streams best possible and to connect your DAC via its digital audio inputs correctly. Additionally, by using latest USB streaming technologies, low jitter audio clocks and ultra-low noise circuit designs, the MC-1.2 is able to regenerate and improve the converted audio signal in a way that connected DACs usually sound better as when fed directly through their USB interfaces.\u003c\/p\u003e  \u003cp\u003eBased on the MC-1.2's ability to work not only USB bus-powered, but also to use its own internal power supply, an isolation between the different power supplies for the digital audio and the USB part of the circuit is the result. To further improve this separation, the different areas of the circuit are supplied independently from each other by ultra-low noise power sources with carefully dimensioned external circuitries. Thereby, the transfer of distortions from the USB stream into the digital audio part can be reduced to an absolute minimum. That helps to improve the audio performance of the converted digital signals significantly.\u003c\/p\u003e  \u003ch3\u003eUsability in Studio, Home and Live Event Environments\u003c\/h3\u003e  \u003cp\u003eThe already outstanding flexibility of the MC-1.2 is additionally increased through the ability to run the unit with its internal power supply for stationary use, or alternatively powered only through the USB interface during e.g. mobile events. Both states are displayed by LEDs on the front panel.\u003c\/p\u003e  \u003cp\u003eThe MC-1.2 comes in a matt-black, rugged steel case with anodized aluminum front panel. Regarding the front panel, you can choose between an aluminum- or black-colored version during purchase. Custom-designed case feets, which include soft rubber rings to prevent unneccessary vibrations, are standardly supplied to use the MC-1.2 as desktop device. For rack-mounting, the feet must be unscrewed and optional rack angles are mounted on the right and left hand of the case.\u003c\/p\u003e  \u003ch3\u003eInterfaces\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e1 x USB2.0 interface, bi-directional usable\u003c\/li\u003e \u003cli\u003e1 x XLR input for AES3\/11, 110ohms terminated, transformer balanced\u003c\/li\u003e \u003cli\u003e1 x BNC input for S\/P-DIF + AES3id, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x RCA input (coaxial) for S\/P-DIF, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x Optical input for S\/P-DIF, Toshiba Toslink™, EIAJ RC-5720\u003c\/li\u003e \u003cli\u003e1 x XLR output for AES3\/11, terminated, transformer balanced, buffered\u003c\/li\u003e \u003cli\u003e1 x BNC input for S\/P-DIF, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x BNC input for AES3id, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x RCA (coaxial) output for S\/P-DIF, terminated, unbalanced, buffered\u003c\/li\u003e \u003cli\u003e1 x Optical output for S\/P-DIF, Toshiba Toslink™, EIAJ RC-5720\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eThrough the USB interface or the internal power supply\u003c\/li\u003e \u003cli\u003eType: Internal switching power supply\u003c\/li\u003e \u003cli\u003eInput Voltage: 90 V – 260 V (automatic adjustment), 47 Hz – 440 Hz\u003c\/li\u003e \u003cli\u003ePower Consumption: max. 10 W\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMechanical Details\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eCover size\/material\/color: 196 x 42 x 156mm without connectors (W x H x D), 1 mm steel sheet 1 mm, black powder-coated\u003c\/li\u003e \u003cli\u003eFront panel size\/material\/surface: 198 x 44 x 4mm (W x H x D), aluminium, anodized, aluminum- or black-colored\u003c\/li\u003e \u003cli\u003eWeight: approx. 1170 g\u003c\/li\u003e \u003c\/ul\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449872904295,"sku":"54046","price":479.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc-1-2-black_54046_1_4692b853-4940-42f6-925e-935f40b38964.jpg?v=1787090779"},{"product_id":"mutec-mc-1-2-usb-interface-signal-converter","title":"Mutec MC-1.2 USB Audio Interface - Silver","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-1.2\u003c\/strong\u003e is a high-performance USB audio interface which converts from USB to AES3, AES3id and S\/P-DIF signals, and vice versa.\u003c\/p\u003e  \u003ch3\u003eUltimate Interconnectivity\u003c\/h3\u003e  \u003cp\u003eThe MC-1.2 enables for the first time bi-directional conversions between USB audio streams and digital audio signals like AES3, AES3id and S\/P-DIF. Therefore, the box does not only offer digital audio outputs, like most of the others, but also a full set of digital audio inputs for AES3, AES3id and S\/P-DIF with BNC, RCA and optical interfaces. Signals received at the USB port are converted to five digital audio outputs simultaneously, which allow the connection of multiple receivers at your computer. When selecting one of the digital audio inputs, the signal received is converted to an USB audio stream and sent into your computer. Both signal paths are able to work at the same time, presupposing equal sampling rates. This enables e.g. the simple connection of effect processors to your computer or the use of recording-equipment, whereat monitoring of recorded signals is possible through the computer during recording.\u003c\/p\u003e  \u003cp\u003eHigh-End DACs or music servers often use BNC interfaces for S\/P-DIF transfers, which is from an electrical point of view surely the best choice. With the MC-1.2, you can convert USB audio streams of every PC or laptop into the S\/P-DIF format and output that through BNC interfaces to drive High-End equipment easily. This can be done while having four further outputs available to feed e.g. digital headphone amplifiers or other devices for convenient listening.\u003c\/p\u003e  \u003ch3\u003eUSB Signal Regeneration and Improvement\u003c\/h3\u003e  \u003cp\u003eIt is known, that USB interconnections, respectively the transfer of digital audio via USB let most of the DACs not sound best. That actually applies also for higher-priced DACs. Using the digital inputs at DACs often results in a better sound. At this point, the MC-1.2 comes in and may help to convert your USB audio streams best possible and to connect your DAC via its digital audio inputs correctly. Additionally, by using latest USB streaming technologies, low jitter audio clocks and ultra-low noise circuit designs, the MC-1.2 is able to regenerate and improve the converted audio signal in a way that connected DACs usually sound better as when fed directly through their USB interfaces.\u003c\/p\u003e  \u003cp\u003eBased on the MC-1.2's ability to work not only USB bus-powered, but also to use its own internal power supply, an isolation between the different power supplies for the digital audio and the USB part of the circuit is the result. To further improve this separation, the different areas of the circuit are supplied independently from each other by ultra-low noise power sources with carefully dimensioned external circuitries. Thereby, the transfer of distortions from the USB stream into the digital audio part can be reduced to an absolute minimum. That helps to improve the audio performance of the converted digital signals significantly.\u003c\/p\u003e  \u003ch3\u003eUsability in Studio, Home and Live Event Environments\u003c\/h3\u003e  \u003cp\u003eThe already outstanding flexibility of the MC-1.2 is additionally increased through the ability to run the unit with its internal power supply for stationary use, or alternatively powered only through the USB interface during e.g. mobile events. Both states are displayed by LEDs on the front panel.\u003c\/p\u003e  \u003cp\u003eThe MC-1.2 comes in a matt-black, rugged steel case with anodized aluminum front panel. Regarding the front panel, you can choose between an aluminum- or black-colored version during purchase. Custom-designed case feets, which include soft rubber rings to prevent unneccessary vibrations, are standardly supplied to use the MC-1.2 as desktop device. For rack-mounting, the feet must be unscrewed and optional rack angles are mounted on the right and left hand of the case.\u003c\/p\u003e  \u003ch3\u003eInterfaces\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e1 x USB2.0 interface, bi-directional usable\u003c\/li\u003e \u003cli\u003e1 x XLR input for AES3\/11, 110ohms terminated, transformer balanced\u003c\/li\u003e \u003cli\u003e1 x BNC input for S\/P-DIF + AES3id, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x RCA input (coaxial) for S\/P-DIF, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x Optical input for S\/P-DIF, Toshiba Toslink™, EIAJ RC-5720\u003c\/li\u003e \u003cli\u003e1 x XLR output for AES3\/11, terminated, transformer balanced, buffered\u003c\/li\u003e \u003cli\u003e1 x BNC input for S\/P-DIF, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x BNC input for AES3id, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x RCA (coaxial) output for S\/P-DIF, terminated, unbalanced, buffered\u003c\/li\u003e \u003cli\u003e1 x Optical output for S\/P-DIF, Toshiba Toslink™, EIAJ RC-5720\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eThrough the USB interface or the internal power supply\u003c\/li\u003e \u003cli\u003eType: Internal switching power supply\u003c\/li\u003e \u003cli\u003eInput Voltage: 90 V – 260 V (automatic adjustment), 47 Hz – 440 Hz\u003c\/li\u003e \u003cli\u003ePower Consumption: max. 10 W\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMechanical Details\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eCover size\/material\/color: 196 x 42 x 156mm without connectors (W x H x D), 1 mm steel sheet 1 mm, black powder-coated\u003c\/li\u003e \u003cli\u003eFront panel size\/material\/surface: 198 x 44 x 4mm (W x H x D), aluminium, anodized, aluminum- or black-colored\u003c\/li\u003e \u003cli\u003eWeight: approx. 1170 g\u003c\/li\u003e \u003c\/ul\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44449872937063,"sku":"54045","price":499.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc-1-2-silver_54045_1_d9899275-f84d-4b91-9123-1e943dd3da1c.jpg?v=1787090779"},{"product_id":"mutec-mc-3-usb-black","title":"Mutec MC-3+ USB - Black","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-3+ Smart Clock USB\u003c\/strong\u003e is setting a new benchmark for clocking technology and the reproduction of digital audio by uniquely combining an audiophile USB interface with an audio re-clocker in perfection! Particularly designed for the demands of high-end consumer audio, the device expands a new sonic universe with increased musicality, clarity, and precision. As such, the MC-3+ USB will prove its worth in many audiophile listening rooms around the world.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450282930279,"sku":"62486","price":1575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc3-plus-usb_54042_1_1_d3038ba5-f2f0-4df5-b028-f277978c2b13.jpg?v=1787092446"},{"product_id":"mutec-mc-1-2-black-demo-deal","title":"Mutec MC-1.2 Black (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC-1.2\u003c\/strong\u003e is a high-performance USB audio interface which converts from USB to AES3, AES3id and S\/P-DIF signals, and vice versa.\u003c\/p\u003e  \u003ch3\u003eUltimate Interconnectivity\u003c\/h3\u003e  \u003cp\u003eThe MC-1.2 enables for the first time bi-directional conversions between USB audio streams and digital audio signals like AES3, AES3id and S\/P-DIF. Therefore, the box does not only offer digital audio outputs, like most of the others, but also a full set of digital audio inputs for AES3, AES3id and S\/P-DIF with BNC, RCA and optical interfaces. Signals received at the USB port are converted to five digital audio outputs simultaneously, which allow the connection of multiple receivers at your computer. When selecting one of the digital audio inputs, the signal received is converted to an USB audio stream and sent into your computer. Both signal paths are able to work at the same time, presupposing equal sampling rates. This enables e.g. the simple connection of effect processors to your computer or the use of recording-equipment, whereat monitoring of recorded signals is possible through the computer during recording.\u003c\/p\u003e  \u003cp\u003eHigh-End DACs or music servers often use BNC interfaces for S\/P-DIF transfers, which is from an electrical point of view surely the best choice. With the MC-1.2, you can convert USB audio streams of every PC or laptop into the S\/P-DIF format and output that through BNC interfaces to drive High-End equipment easily. This can be done while having four further outputs available to feed e.g. digital headphone amplifiers or other devices for convenient listening.\u003c\/p\u003e  \u003ch3\u003eUSB Signal Regeneration and Improvement\u003c\/h3\u003e  \u003cp\u003eIt is known, that USB interconnections, respectively the transfer of digital audio via USB let most of the DACs not sound best. That actually applies also for higher-priced DACs. Using the digital inputs at DACs often results in a better sound. At this point, the MC-1.2 comes in and may help to convert your USB audio streams best possible and to connect your DAC via its digital audio inputs correctly. Additionally, by using latest USB streaming technologies, low jitter audio clocks and ultra-low noise circuit designs, the MC-1.2 is able to regenerate and improve the converted audio signal in a way that connected DACs usually sound better as when fed directly through their USB interfaces.\u003c\/p\u003e  \u003cp\u003eBased on the MC-1.2's ability to work not only USB bus-powered, but also to use its own internal power supply, an isolation between the different power supplies for the digital audio and the USB part of the circuit is the result. To further improve this separation, the different areas of the circuit are supplied independently from each other by ultra-low noise power sources with carefully dimensioned external circuitries. Thereby, the transfer of distortions from the USB stream into the digital audio part can be reduced to an absolute minimum. That helps to improve the audio performance of the converted digital signals significantly.\u003c\/p\u003e  \u003ch3\u003eUsability in Studio, Home and Live Event Environments\u003c\/h3\u003e  \u003cp\u003eThe already outstanding flexibility of the MC-1.2 is additionally increased through the ability to run the unit with its internal power supply for stationary use, or alternatively powered only through the USB interface during e.g. mobile events. Both states are displayed by LEDs on the front panel.\u003c\/p\u003e  \u003cp\u003eThe MC-1.2 comes in a matt-black, rugged steel case with anodized aluminum front panel. Regarding the front panel, you can choose between an aluminum- or black-colored version during purchase. Custom-designed case feets, which include soft rubber rings to prevent unneccessary vibrations, are standardly supplied to use the MC-1.2 as desktop device. For rack-mounting, the feet must be unscrewed and optional rack angles are mounted on the right and left hand of the case.\u003c\/p\u003e  \u003ch3\u003eInterfaces\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003e1 x USB2.0 interface, bi-directional usable\u003c\/li\u003e \u003cli\u003e1 x XLR input for AES3\/11, 110ohms terminated, transformer balanced\u003c\/li\u003e \u003cli\u003e1 x BNC input for S\/P-DIF + AES3id, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x RCA input (coaxial) for S\/P-DIF, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x Optical input for S\/P-DIF, Toshiba Toslink™, EIAJ RC-5720\u003c\/li\u003e \u003cli\u003e1 x XLR output for AES3\/11, terminated, transformer balanced, buffered\u003c\/li\u003e \u003cli\u003e1 x BNC input for S\/P-DIF, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x BNC input for AES3id, 75ohms terminated, unbalanced\u003c\/li\u003e \u003cli\u003e1 x RCA (coaxial) output for S\/P-DIF, terminated, unbalanced, buffered\u003c\/li\u003e \u003cli\u003e1 x Optical output for S\/P-DIF, Toshiba Toslink™, EIAJ RC-5720\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003ePower Supply\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eThrough the USB interface or the internal power supply\u003c\/li\u003e \u003cli\u003eType: Internal switching power supply\u003c\/li\u003e \u003cli\u003eInput Voltage: 90 V – 260 V (automatic adjustment), 47 Hz – 440 Hz\u003c\/li\u003e \u003cli\u003ePower Consumption: max. 10 W\u003c\/li\u003e \u003c\/ul\u003e   \u003ch3\u003eMechanical Details\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eCover size\/material\/color: 196 x 42 x 156mm without connectors (W x H x D), 1 mm steel sheet 1 mm, black powder-coated\u003c\/li\u003e \u003cli\u003eFront panel size\/material\/surface: 198 x 44 x 4mm (W x H x D), aluminium, anodized, aluminum- or black-colored\u003c\/li\u003e \u003cli\u003eWeight: approx. 1170 g\u003c\/li\u003e \u003c\/ul\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450285650023,"sku":"101546","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc-1-2-black_54046_1_1_6f224b9b-12b2-4fb7-9613-a64b104bc68e.jpg?v=1787092456"},{"product_id":"mutec-mc3-smart-clock-black","title":"Mutec MC3+ Smart Clock - Black","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC3+ Smart Clock\u003c\/strong\u003e is developed to significantly improve the audiophile quality of connected digital audio devices in two ways: At first by clocking devices with ultra-low-jitter Word Clock signals and secondly by aggressively re-clocking incoming digital audio signals.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eEnhancement of Sound Quality by high-resolution Audio Re-Clocking\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIt is widely known that a master clock changes the sound quality of digital audio devices more or less to a higher level. But carving out finest audio details in your recordings to reproduce individual instruments as clear as possible and to raise the precision of their positions within the spatial sound to a maximum is possible at best with high-resolution re-clocking of your digital audio material. That is what MUTEC's new audio re-clocking algorithms paired with the 1G-Clock technology perform in the MC-3+ Smart Clock. Thus, the sensing of the incoming audio is carried out with highest resolution which leads to ultimate precision during merging the audio data with the new ultra-low-jitter clock. The result is unparalleled richness of details and spatiality of the re-clocked audio material.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eThe real next Step in Audio Clock Generation\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWhile others argue for their products with standardly known technical aspects, MUTEC really sets the benchmark of digital audio clocking to a higher level using the proprietary 1G-Clock technology for the first time in the MC-3+ Smart Clock. Running a frequency synthesis on a specifically calculated high clock rate, eliminates completely typical jitter inducing artifacts which are present in all standardly implemented DDS processes. Additionally, we took a look around the clock generation circuit and developed totally new ultra-low-noise power supplies and PCB design rules aligned to high-speed communication technologies to virtually eliminate all electrical noise. Thus, the new 1G-Clock technology helps you to bring jitter down to an unique low level, which leads to unprecedented transparency in your audio recordings.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eUsability in Studio and Live Event Environments\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe new MC-3+ Smart Clock works not only as generator, but also as clock distributor. Unlike other products, the MC-3+ effectively regenerates incoming clock signals to higher purity as the signal source. This helps to stabilize already existing clock systems and improves the level of sound reproduction quality in your studio environment. In cases when the MC-3+'s digitally-compensated clock accuracy is not sufficient, it is possible to lock the system to references of higher accuracy like so-called Atomic clocks or GPS receivers to raise the timing accuracy to the highest possible level. Additional to that, for the use during live events or in mobile trucks, the MC-3+ features anytime-fail-safe clock generation in every state of operation. Entering the hold-over-mode and re-synchronization of returning clock references is carried out so smoothly that live recordings will surely not be affected. Thus, the new MUTEC MC-3+ Smart Clock ensures flawless synchronization of connected devices at any time, while enhancing the sound of your audio production impressively.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450350530663,"sku":"110123","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc3-plus_110123_1_1_f6b1cba6-23aa-4617-a6dc-157a1f32afae.jpg?v=1787092700"},{"product_id":"mutec-ref-10-masterclock-black","title":"Mutec REF 10 Masterclock - Black","description":"\u003cp\u003eThe \u003cstrong\u003eMutec REF 10 Masterclock\u003c\/strong\u003eis an audiophile reference master clock generating 10 MHz signals with industry-leading low phase noise (i.e. jitter) to significantly improve digital playback systems. As the conductor of your digital audio orchestra at home, the REF 10 will inspire you with unheard-of clarity, graceful dynamics, and pure music. It is the most flexible, most compatible 10 MHz clock on the market allowing you to spend less time worrying about integration and leaving you with more hours to enjoy blissful playback.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUnlock a more dynamic, more transparent sound stage with exceptional spatiality and level of detail, free from any digital blur. For all music enthusiasts reaching for the pinnacle of signal purity, audio quality, and clock precision, the REF 10 is the must-have expansion to conduct your digital playback chain.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450352824423,"sku":"95333","price":4399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-ref-10_95333_1_8045ae2c-922c-4a11-817f-7058923b9dce.jpg?v=1787092711"},{"product_id":"mutec-mc3-smart-clock-black-demo-deal","title":"Mutec MC3+ Smart Clock - Black (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC3+ Smart Clock\u003c\/strong\u003e is developed to significantly improve the audiophile quality of connected digital audio devices in two ways: At first by clocking devices with ultra-low-jitter Word Clock signals and secondly by aggressively re-clocking incoming digital audio signals.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eEnhancement of Sound Quality by high-resolution Audio Re-Clocking\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIt is widely known that a master clock changes the sound quality of digital audio devices more or less to a higher level. But carving out finest audio details in your recordings to reproduce individual instruments as clear as possible and to raise the precision of their positions within the spatial sound to a maximum is possible at best with high-resolution re-clocking of your digital audio material. That is what MUTEC's new audio re-clocking algorithms paired with the 1G-Clock technology perform in the MC-3+ Smart Clock. Thus, the sensing of the incoming audio is carried out with highest resolution which leads to ultimate precision during merging the audio data with the new ultra-low-jitter clock. The result is unparalleled richness of details and spatiality of the re-clocked audio material.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eThe real next Step in Audio Clock Generation\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWhile others argue for their products with standardly known technical aspects, MUTEC really sets the benchmark of digital audio clocking to a higher level using the proprietary 1G-Clock technology for the first time in the MC-3+ Smart Clock. Running a frequency synthesis on a specifically calculated high clock rate, eliminates completely typical jitter inducing artifacts which are present in all standardly implemented DDS processes. Additionally, we took a look around the clock generation circuit and developed totally new ultra-low-noise power supplies and PCB design rules aligned to high-speed communication technologies to virtually eliminate all electrical noise. Thus, the new 1G-Clock technology helps you to bring jitter down to an unique low level, which leads to unprecedented transparency in your audio recordings.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eUsability in Studio and Live Event Environments\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe new MC-3+ Smart Clock works not only as generator, but also as clock distributor. Unlike other products, the MC-3+ effectively regenerates incoming clock signals to higher purity as the signal source. This helps to stabilize already existing clock systems and improves the level of sound reproduction quality in your studio environment. In cases when the MC-3+'s digitally-compensated clock accuracy is not sufficient, it is possible to lock the system to references of higher accuracy like so-called Atomic clocks or GPS receivers to raise the timing accuracy to the highest possible level. Additional to that, for the use during live events or in mobile trucks, the MC-3+ features anytime-fail-safe clock generation in every state of operation. Entering the hold-over-mode and re-synchronization of returning clock references is carried out so smoothly that live recordings will surely not be affected. Thus, the new MUTEC MC-3+ Smart Clock ensures flawless synchronization of connected devices at any time, while enhancing the sound of your audio production impressively.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450498445415,"sku":"126910","price":990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc3-plus_110123_1_1_1_e471e994-41ee-4371-b81d-9bcdb8d99c1b.jpg?v=1787093307"},{"product_id":"mutec-mc3-smart-clock-silver-demo-deal","title":"Mutec MC3+ Smart Clock - Silver (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC3+ Smart Clock\u003c\/strong\u003e is developed to significantly improve the audiophile quality of connected digital audio devices in two ways: At first by clocking devices with ultra-low-jitter Word Clock signals and secondly by aggressively re-clocking incoming digital audio signals.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eEnhancement of Sound Quality by high-resolution Audio Re-Clocking\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIt is widely known that a master clock changes the sound quality of digital audio devices more or less to a higher level. But carving out finest audio details in your recordings to reproduce individual instruments as clear as possible and to raise the precision of their positions within the spatial sound to a maximum is possible at best with high-resolution re-clocking of your digital audio material. That is what MUTEC's new audio re-clocking algorithms paired with the 1G-Clock technology perform in the MC-3+ Smart Clock. Thus, the sensing of the incoming audio is carried out with highest resolution which leads to ultimate precision during merging the audio data with the new ultra-low-jitter clock. The result is unparalleled richness of details and spatiality of the re-clocked audio material.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eThe real next Step in Audio Clock Generation\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWhile others argue for their products with standardly known technical aspects, MUTEC really sets the benchmark of digital audio clocking to a higher level using the proprietary 1G-Clock technology for the first time in the MC-3+ Smart Clock. Running a frequency synthesis on a specifically calculated high clock rate, eliminates completely typical jitter inducing artifacts which are present in all standardly implemented DDS processes. Additionally, we took a look around the clock generation circuit and developed totally new ultra-low-noise power supplies and PCB design rules aligned to high-speed communication technologies to virtually eliminate all electrical noise. Thus, the new 1G-Clock technology helps you to bring jitter down to an unique low level, which leads to unprecedented transparency in your audio recordings.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eUsability in Studio and Live Event Environments\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe new MC-3+ Smart Clock works not only as generator, but also as clock distributor. Unlike other products, the MC-3+ effectively regenerates incoming clock signals to higher purity as the signal source. This helps to stabilize already existing clock systems and improves the level of sound reproduction quality in your studio environment. In cases when the MC-3+'s digitally-compensated clock accuracy is not sufficient, it is possible to lock the system to references of higher accuracy like so-called Atomic clocks or GPS receivers to raise the timing accuracy to the highest possible level. Additional to that, for the use during live events or in mobile trucks, the MC-3+ features anytime-fail-safe clock generation in every state of operation. Entering the hold-over-mode and re-synchronization of returning clock references is carried out so smoothly that live recordings will surely not be affected. Thus, the new MUTEC MC-3+ Smart Clock ensures flawless synchronization of connected devices at any time, while enhancing the sound of your audio production impressively.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450542256231,"sku":"129983","price":765.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc3-plus_1_78eda973-7c0c-4b88-890f-fd453596c337.jpg?v=1787093486"},{"product_id":"mutec-ref10-se120-black","title":"Mutec REF10 SE120 Audiophile Reference Clock Generator - Black","description":"\u003cp\u003eThe \u003cstrong\u003eMutec REF10 SE120\u003c\/strong\u003e is a special version of the successful audiophile reference clock generator REF10 further enhanced in terms of signal performance. The exceptional quality of the original REF10 has been confirmed many times since its launch in 2017 – in numerous reviews from specialized magazines and through enthusiastic user feedback. A clock generator from MUTEC significantly increases the quality of digital music playback, even and especially with demanding high‑end systems and studio installations. Because it provides the foundation for perfect signal processing in a digital audio chain: the extremely low‑noise reference clock.\u003c\/p\u003e\r\n\u003cp\u003eThe \"tuning\" variant REF10 SE120 outperforms the original model REF10 in this regard considerably. A clearly measurable advantage is the result of a special feature of the REF10 SE120: its much more elaborately manufactured and selected oven‑controlled quartz oscillator (OCXO). This oscillator is selected according to the strictest standards in test procedures lasting many hours with the help of exceptionally precise and expensive measuring technology. The use of such an outstanding oscillator is responsible for the fact that the REF10 SE120 from MUTEC currently delivers the lowest phase noise, respectively jitter values in the industry. This outstanding technical performance has a noticeable impact on the sonic result. Precision, transparency, spatiality and dynamics of the musical presentation reach an unprecedented level and will inspire you!\u003c\/p\u003e\r\n\u003cp\u003eLike the proven REF10, the optimized REF10 SE120 is extremely flexible. Because of its versatile connectivity this MUTEC clock generator can be successfully integrated in a wide variety of configurations while maintaining an easy way of operation. If you want to maximize the sound potential of your compatible DA converter, music server or audio re‑clocker in every respect, you need the REF10 SE120 from MUTEC!\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUltimate audiophile performance enhancement for compatible DACs, master clocks and re‑clockers by any other brand\u003c\/li\u003e\r\n\u003cli\u003eUltra‑low noise high stability clock reference for the entire digital audio chain at home or in the studio\u003c\/li\u003e\r\n\u003cli\u003eIdeal high‑end upgrade for MUTEC’s own MC‑3+, MC‑3+USB, and iClock\/iClock dp master clocks\u003c\/li\u003e\r\n\u003cli\u003eStabilization of existing audio video clock generators\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450624471143,"sku":"145757","price":6549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-ref10-se120_145757_1_7abf72db-57ae-4dcc-9abe-59aa82412c29.jpg?v=1787093803"},{"product_id":"mutec-mc3-rack-mount-kit-1u","title":"Mutec MC3+ Rack Mount Kit 1U","description":"\u003cp\u003eUse the \u003cstrong\u003eMutec MC3+ Rack Mount Kit\u003c\/strong\u003e to mount your MC3+ Smart Clock in a single 19\" outboard rack space.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450665627751,"sku":"109997","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/new_109997_1.jpg?v=1787093979"},{"product_id":"mutec-ref-10-rack-mount-kit-2u","title":"Mutec REF 10 Rack Mount Kit 2U","description":"\u003cp\u003eUse the \u003cstrong\u003eMutec REF 10 Rack Mount Kit\u003c\/strong\u003e to mount your REF 10 audiophile reference master clock in a two 19\" outboard rack spaces.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44450665660519,"sku":"109996","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec_109996_1_ed1413b7-6206-471d-80ef-d40453cff92f.jpg?v=1787093979"},{"product_id":"mutec-ref10-nano-compact-10-mhz-reference-master-clock-silver","title":"Mutec REF10 NANO Compact 10 Mhz Reference Master Clock - Silver","description":"\u003cp\u003eThe \u003cstrong\u003eREF10 NANO\u003c\/strong\u003e is the focused version of an audiophile 10 MHz reference master clock in the superior quality you should expect from clocking specialist MUTEC. It is based on the already well-established REF10, but transfers its technology, praised by many customers and reviewers, into a new, significantly lower price range.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith the REF10 NANO, dedicated music lovers are for the first time able to significantly improve the sound performance of their home digital audio system for a moderate investment. Likewise, thanks to this MUTEC reference master clock, aspiring studio owners can guarantee their customers maximum sound quality when mastering and recording their music productions. No matter which kind of playback setup the REF10 NANO is used in, a noticeable increase in transparency, spatiality and dynamics will be clearly audible in general.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe REF10 NANO can be directly connected to up to four 10 MHz-compatible devices. D\/A converters, network switches, re-clockers, clock generators, CD players, servers or streamers are perfect partners. In case these components do not have a dedicated 10 MHz input, an MC3+ or MC3+ USB interface from MUTEC provides the necessary interconnection between the REF10 NANO and the audio equipment to be synchronized. On the other hand, the REF10 NANO is the perfect partner to an existing MC3+ or MC3+ USB. Together they raise the signal’s audiophile quality – already improved and re-clocked by the MC3+\/MC3+ USB interface – to an even higher level.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTake the chance and discover what your digital audio system is capable of. Entering the sound-enhancing world of 10 MHz reference master clocks has never been more affordable than with the REF10 NANO from experts MUTEC.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eADVANTAGE OCXO\u003c\/h3\u003e\r\n\r\n\u003cp\u003eHighly important for the performance of a reference master clock is the frequency stability of the oscillator used. This parameter is dependent, among other things, on its ambient temperature, which must remain within a precisely defined range. If this very narrowly defined frame is deviated from by a variation in the ambient temperature, the frequency stability of the oscillator is affected. This has a significant impact on the precision of the digital signal processing for connected audio devices. The German-made OCXO (Oven Controlled Quartz Oscillator) used in the REF10 NANO is permanently kept at the same ideal temperature in its dedicated heated enclosure.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eTARGETED DESIGN\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIn order to remove jitter and phase noise from clock signals to the maximum extent possible, further manifold steps were taken. The REF10 NANO has an enclosure made of steel to protect the electronics from high frequency interferences. Compared to commonly used aluminum cases, the insulation against external interferences is considerably better. To avoid hum caused by ground loops, all output stages of the REF10 NANO are galvanically isolated. Each of the four clock outputs can be switched on and off individually so that only the required outputs are active. This helps to minimize mutual interferences in the high frequency range as best as possible. There are two pairs of outputs, each with a different termination of 50 ohms and 75 ohms. This ensures successful interaction of the REF10 NANO with a wide range of devices of other manufacturers. Operation couldn't be simpler: all you have to do is select the desired output and the NANO immediately works.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eCLEAR SOUND IMPROVEMENT\u003c\/h3\u003e\r\n\r\n\u003cp\u003eUsing a reference master clock such as the affordable REF10 NANO can significantly improve the sound of a digital audio setup. This applies to the audiophile listener at home as well as to the mastering\/recording engineer in a professional A\/V studio environment. In every use case, there is a clear increase in audio quality. Including the REF10 NANO in your system results in higher transparency, more clearly defined bass, darker background, better instrument staging and extended imaging. The MUTEC REF10 NANO certainly takes the audio quality of compatible D\/A converters, network switches, servers, streamers, CD players, clock generators and re-clockers to a new level. It is likewise the perfect upgrade for owners of an MC3+\/MC3+ USB interface. In every context, the REF10 NANO 10 MHz reference master clock makes a significant contribution to fulfilling the central MUTEC promise: Perfecting Digital Audio.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44451014017127,"sku":"212275","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-ref10-nano-compact-10-mhz-reference-master-clock-silver-23_212275_1_07e227cc-19d5-4f23-934f-f493510e2837.jpg?v=1787095496"},{"product_id":"mutec-ref10-nano-compact-10-mhz-reference-master-clock-black","title":"Mutec REF10 NANO Compact 10 Mhz Reference Master Clock - Black","description":"\u003cp\u003eThe \u003cstrong\u003eREF10 NANO\u003c\/strong\u003e is the focused version of an audiophile 10 MHz reference master clock in the superior quality you should expect from clocking specialist MUTEC. It is based on the already well-established REF10, but transfers its technology, praised by many customers and reviewers, into a new, significantly lower price range.\u003c\/p\u003e\r\n\u003cp\u003eWith the REF10 NANO, dedicated music lovers are for the first time able to significantly improve the sound performance of their home digital audio system for a moderate investment. Likewise, thanks to this MUTEC reference master clock, aspiring studio owners can guarantee their customers maximum sound quality when mastering and recording their music productions. No matter which kind of playback setup the REF10 NANO is used in, a noticeable increase in transparency, spatiality and dynamics will be clearly audible in general.\u003c\/p\u003e\r\n\u003cp\u003eThe REF10 NANO can be directly connected to up to four 10 MHz-compatible devices. D\/A converters, network switches, re-clockers, clock generators, CD players, servers or streamers are perfect partners. In case these components do not have a dedicated 10 MHz input, an MC3+ or MC3+ USB interface from MUTEC provides the necessary interconnection between the REF10 NANO and the audio equipment to be synchronized. On the other hand, the REF10 NANO is the perfect partner to an existing MC3+ or MC3+ USB. Together they raise the signal’s audiophile quality – already improved and re-clocked by the MC3+\/MC3+ USB interface – to an even higher level.\u003c\/p\u003e\r\n\u003cp\u003eTake the chance and discover what your digital audio system is capable of. Entering the sound-enhancing world of 10 MHz reference master clocks has never been more affordable than with the REF10 NANO from experts MUTEC.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eADVANTAGE OCXO\u003c\/h3\u003e\r\n\u003cp\u003eHighly important for the performance of a reference master clock is the frequency stability of the oscillator used. This parameter is dependent, among other things, on its ambient temperature, which must remain within a precisely defined range. If this very narrowly defined frame is deviated from by a variation in the ambient temperature, the frequency stability of the oscillator is affected. This has a significant impact on the precision of the digital signal processing for connected audio devices. The German-made OCXO (Oven Controlled Quartz Oscillator) used in the REF10 NANO is permanently kept at the same ideal temperature in its dedicated heated enclosure.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eTARGETED DESIGN\u003c\/h3\u003e\r\n\u003cp\u003eIn order to remove jitter and phase noise from clock signals to the maximum extent possible, further manifold steps were taken. The REF10 NANO has an enclosure made of steel to protect the electronics from high frequency interferences. Compared to commonly used aluminum cases, the insulation against external interferences is considerably better. To avoid hum caused by ground loops, all output stages of the REF10 NANO are galvanically isolated. Each of the four clock outputs can be switched on and off individually so that only the required outputs are active. This helps to minimize mutual interferences in the high frequency range as best as possible. There are two pairs of outputs, each with a different termination of 50 ohms and 75 ohms. This ensures successful interaction of the REF10 NANO with a wide range of devices of other manufacturers. Operation couldn't be simpler: all you have to do is select the desired output and the NANO immediately works.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eCLEAR SOUND IMPROVEMENT\u003c\/h3\u003e\r\n\u003cp\u003eUsing a reference master clock such as the affordable REF10 NANO can significantly improve the sound of a digital audio setup. This applies to the audiophile listener at home as well as to the mastering\/recording engineer in a professional A\/V studio environment. In every use case, there is a clear increase in audio quality. Including the REF10 NANO in your system results in higher transparency, more clearly defined bass, darker background, better instrument staging and extended imaging. The MUTEC REF10 NANO certainly takes the audio quality of compatible D\/A converters, network switches, servers, streamers, CD players, clock generators and re-clockers to a new level. It is likewise the perfect upgrade for owners of an MC3+\/MC3+ USB interface. In every context, the REF10 NANO 10 MHz reference master clock makes a significant contribution to fulfilling the central MUTEC promise: Perfecting Digital Audio.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44451014049895,"sku":"212274","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-ref10-nano-compact-10-mhz-reference-master-clock-black-23_212274_1_e70ef144-c97f-4100-8679-e451cbf2ac97.jpg?v=1787095496"},{"product_id":"mutec-ref10-se120-audiophile-clock-reference-generator-aluminum","title":"Mutec REF10 SE120 Audiophile Clock Reference Generator - Aluminum","description":"\u003cp\u003eThe \u003cstrong\u003eMutec REF10 SE120\u003c\/strong\u003e is a special version of the successful audiophile reference clock generator REF10 further enhanced in terms of signal performance. The exceptional quality of the original REF10 has been confirmed many times since its launch in 2017 – in numerous reviews from specialized magazines and through enthusiastic user feedback. A clock generator from MUTEC significantly increases the quality of digital music playback, even and especially with demanding high‑end systems and studio installations. Because it provides the foundation for perfect signal processing in a digital audio chain: the extremely low‑noise reference clock.\u003c\/p\u003e\r\n\u003cp\u003eThe \"tuning\" variant REF10 SE120 outperforms the original model REF10 in this regard considerably. A clearly measurable advantage is the result of a special feature of the REF10 SE120: its much more elaborately manufactured and selected oven‑controlled quartz oscillator (OCXO). This oscillator is selected according to the strictest standards in test procedures lasting many hours with the help of exceptionally precise and expensive measuring technology. The use of such an outstanding oscillator is responsible for the fact that the REF10 SE120 from MUTEC currently delivers the lowest phase noise, respectively jitter values in the industry. This outstanding technical performance has a noticeable impact on the sonic result. Precision, transparency, spatiality and dynamics of the musical presentation reach an unprecedented level and will inspire you!\u003c\/p\u003e\r\n\u003cp\u003eLike the proven REF10, the optimized REF10 SE120 is extremely flexible. Because of its versatile connectivity this MUTEC clock generator can be successfully integrated in a wide variety of configurations while maintaining an easy way of operation. If you want to maximize the sound potential of your compatible DA converter, music server or audio re‑clocker in every respect, you need the REF10 SE120 from MUTEC!\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUltimate audiophile performance enhancement for compatible DACs, master clocks and re‑clockers by any other brand\u003c\/li\u003e\r\n\u003cli\u003eUltra‑low noise high stability clock reference for the entire digital audio chain at home or in the studio\u003c\/li\u003e\r\n\u003cli\u003eIdeal high‑end upgrade for MUTEC’s own MC‑3+, MC‑3+USB, and iClock\/iClock dp master clocks\u003c\/li\u003e\r\n\u003cli\u003eStabilization of existing audio video clock generators\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44451124084839,"sku":"136787","price":6549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-ref10-se120_136787_1.jpg?v=1787095929"},{"product_id":"mutec-mc-1-2-bidirectional-digital-to-digital-converter","title":"Mutec MC 1.2+ Bidirectional Digital to Digital Converter with USB Interface - Black","description":"\u003cp\u003eThe \u003cstrong\u003eMutec MC1.2+\u003c\/strong\u003e easily converts PCM audiostreams through its USB, AES\/EBU (XLR), AES3\/EBUid (BNC) and S\/P‑DIF (Toslink\/BNC, RCA via adapter) interface ports. This process can be performed simultaneously - also via USB - in both directions: In and Out. Such an exceptional flexibility proves to be extremely useful in a professional recording studio, broadcast studio or as part of a sound reinforcement system. There, thanks to the MC1.2+, versatile and lossless signal transfers between audio interfaces, digital mixers and effects processors in real‑time become possible. In addition, this DDC from MUTEC improves the sound quality of the USB connection by isolating the USB power supply and then regenerating the signal. This feature makes the MC1.2+ also very appealing for audiophile listeners.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eINTERCONNECT AND IMPROVE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe MC1.2+ combines comprehensive digital audio format conversion features with a sound quality‑improving performance via USB. Thus, MUTEC's DDC provides an enhanced listening experience when playing audio files from a computer or streamer, it maintains a high quality during recording or mastering and is an essential tool when digital audio components have to interact seamlessly. The MUTEC MC1.2+ is suited for the audiophile enthusiast as well as professional music producers and mixing engineers.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIn professional recording studios or sophisticated home recording setups, the MC1.2+ solves a key problem. Due to the increasing number of devices with different digital interfaces, a conversion of the audio formats becomes necessary to allow the devices to communicate with each other. This is where MUTEC's digital to digital converter comes in handy by converting audio streams between the established formats USB, AES3, AES3id, S\/P‑DIF. To do this, it provides a comprehensive number of required input and output interface ports. The converting can be done in both directions at the same time. For the first time, a bi-directional conversion via the USB connection to the computer is possible with the MC1.2+.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAudio streams received at the USB interface are always converted to all PCM audio outputs simultaneously. This allows the connection of several receiving devices to one computer. If one of the PCM audio inputs is selected, the incoming signal is not only distributed to all digital audio outputs, but also converted into a USB audio stream and sent to the computer. Both signal paths may be used simultaneously - if the sampling rates are identical. This enables an easy connection of effect processors to your computer or the use of recording‑equipment, where a monitoring of recorded signals is possible through the computer during recording.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eSTANDARD COMPLIANT CONVERSION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe format conversion process does not only the necessary electrical conversion but also a real format conversion of the reference signals in compliance with the specifications standardized by the Audio Engineering Society (AES) and the International Electrotechnical Commission (IEC). By converting the format via the MC1.2+, a high quality DAC without USB interface can be easily included into a USB‑based audio system. In the same way, the MUTEC DDC makes it possible to use the BNC interface, which is the best choice in terms of electrical and shielding quality.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eSOUND IMPROVEMENT THROUGH USB SIGNAL REGENERATION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIn addition to converting audio formats, the MC1.2+ fulfills another role. It's newly developed asynchronous USB interface with low‑noise audio clock oscillators improves the audio stream through signal regeneration and isolation of the USB power supply. The noise previously added by the power supply via the USB interface can no longer impair the digital signal processing. This leads to a significant reduction of digital phase noise and jitter. Both the producer in the studio and the music lover at home do benefit from this enhancement of sound quality.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003eTHREE WAYS TO POWER SUPPLY\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe MC1.2+ offers three types of power source. It can be powered directly though the USB port, which qualifies the MUTEC DDC for all kinds of mobile operations. For stationary use, the high‑quality internal power supply unit ensures a clean power feed. Finally, the MC1.2+ has a separate DC input for potential tuning measures via an advanced external power supply. A display on the front of the unit shows the current selection. The proven operating concept which several rows of clearly grouped LED chains ensure that the user always finds the desired function and is informed about the status of operation.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_4\"\u003eROCK SOLID APPEARANCE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe MUTEC digital to digital converter exudes a dignified value, not least due to the special vibration‑damping rubber feet and a stable and shielding sheet steel housing. This way, the unit integrates in harmony with a hifi system or studio rack. Optionally available rack brackets can be mounted on the sides of the unit. For rack mounting, the cabinet feet may be unscrewed. Manufacture in Germany ensures a consistently high quality.\u003c\/p\u003e","brand":"Mutec","offers":[{"title":"Default Title","offer_id":44451181363303,"sku":"470642","price":875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/mutec-mc-12plus_470642_1.jpg?v=1787096167"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/mutec.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}