{"title":"Sound Anchors","description":null,"products":[{"product_id":"sound-anchor-barefoot-sound-micromain27-stand-single","title":"Barefoot Sound MicroMain27 Stand - Single","description":"\u003cb\u003eBuilt custom by Sound Anchors for Barefoot MM27\u003c\/b\u003e\u003cp\u003e \u003cb\u003eStand Specs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eBase: 21\"x17\"x2\" (L x W x H) \u003c\/li\u003e\n\u003cli\u003eStand Height: 56\" \u003c\/li\u003e\n\u003cli\u003eTweeter Height Adjustment: 13\" to 54.5\" \u003c\/li\u003e\n\u003cli\u003eMaximum clearance Under Speaker (vertical): 44.25\" \u003c\/li\u003e\n\u003cli\u003eMaximum Clearance Under Speaker (horizontal): 49\" \u003c\/li\u003e\n\u003cli\u003eSpeaker Mount Tilt: 5 degrees up or down\u003c\/li\u003e\n\u003c\/ul\u003e \u003cb\u003eSound Anchors Stand Mounting Procedure \u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e 1. Remove the mounting bracket from the stand and place it on the side of the speaker cabinet. Line up the mounting holes, insert the bolts and finger tighten. If the bolts are too long and bottom out before the bracket is snug against the speaker cabinet, STOP. You may have the wrong size bolts. Contact Vintage King. \u003cbr\u003e\u003cbr\u003e 2. Secure the speaker mounting bracket to the stand at desired height. \u003cbr\u003e\u003cbr\u003e 3. Attach MM27 handles the side of cabinet opposite to the side the mounting bracket will attach to. Then set the speaker horizontally on the floor. \u003cbr\u003e\u003cbr\u003e * If your cabinet doesn't have mounting bolt holes on both sides, then set the speaker horizontally between two stacks of books straddling the subwoofer to prevent it from touching the floor. \u003cbr\u003e\u003cbr\u003e 4. Tilt the stand down and line up the mounting bracket holes with the cabinet bolt holes. \u003cbr\u003e\u003cbr\u003e 5. Insert bolts and tighten until the mounting bracket is snug against the speaker cabinet. Do not over tighten! If the bolts are too long and bottom out before the bracket is snug, STOP. You may have the wrong size bolts. Contact Vintage King. \u003cbr\u003e\u003cbr\u003e * A good way to ensure you do not over tighten the bolts is to put the long end of the Allen wrench into the bolt and turn it using the short end. Tighten the bolt using no more force than you can apply to the short end of the wrench while holding it in the tips of your thumb and index finger. \u003cbr\u003e\u003cbr\u003e 6. Carefully tilt the entire assembly (speaker and stand) back up so it stands vertically.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449293041767,"sku":"7745","price":477.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/barefoot_mm27_stand_1.jpg?v=1787088440"},{"product_id":"sound-anchor-adjustable-44-monitor-stands-10x14-plate","title":"Sound Anchors ADJ1 44\" Adjustable Monitor Stand with 10x14\" Platform - Pair","description":"\u003cp\u003e\u003cstrong\u003eSound Anchors ADJ1\u003c\/strong\u003e monitor stands are fully adjustable and are designed to allow you to correctly place a pair of monitors behind the console for best sound. For increased flexibility these studio monitor stands allow height and tilt adjustment of the monitors. The 14\" x 17\" bases and the uprights are filled and dampened from the factory. ADJ1 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor ADJ1 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449349894247,"sku":"9532","price":1386.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj1-pair-23_9532_1_7a37bcb6-7b35-453a-bf1c-986183cd5ff6.jpg?v=1787088657"},{"product_id":"sound-anchor-conecoaster","title":"Sound Anchors ConeCoaster","description":"If you have expensive hardwood or tile floors the last thing you want to do is place a heavy object with spikes directly on it. This is even more important with fine furniture. Your beautiful surfaces can be ruined beyond repair. Why would you want to compromise the sound quality of your system?\u003cbr\u003e \u003cbr\u003e If you have a reference music system you will seriously limit your systems performance if you choose to not use spikes or cones with it. So what can you do that will make it possible to use spikes on your hardwood or tile?\u003cbr\u003e \u003cbr\u003e Sound Anchors Has The Answer\u003cbr\u003e Sound Anchors has been the leader in the development and production of high performance speaker stands since their very beginnings. Their stands have a reputation for superior sound and are used by audiophiles and studio professionals alike. All Sound Anchors Speaker Stands and Component Stands are spiked at the floor. Sound Anchors has done a great deal of research into what happens at the interface between speaker and floor. They realized that whatever you put between a spike and the floor must be rigid as not to allow any movement. It must also be poor at transferring energy into the floor. If the device is too good at transferring energy the floor will become a sounding board and distort.\u003cbr\u003e \u003cbr\u003e The Sound Anchors Solution\u003cbr\u003e Sound Anchors Conecoasters protect your floors and limit energy transfer thus improving system performance. Sound Anchors Conecoasters are designed so that they will accept either down pointing or up pointing cones. This gives you more options when tuning your audio system.\u003cbr\u003e \u003cbr\u003e Sound Anchors Conecoasters are made of two dissimilar materials. The upper (hard) part is made of super high quality stainless steel. It has no plating or surface coating to tarnish, discolor or come off. The lower (soft) part is made of a special ultra high density Polyester felt which was specially developed to restrict energy transfer in the audio band. It is a high loss low compliance material. It will not break down, soften or leave marks. This material will not harm wood or tile in any way.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449355104359,"sku":"15170","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-conecoaster-21_15170_1.jpg?v=1787088681"},{"product_id":"sound-anchor-adjustable-46-medium-monitor-stands-pair","title":"Sound Anchors Adjustable 46\" Medium Monitor Stands - Pair","description":"When your monitors are positioned properly on rigid stable platforms your entire sound-field is more clear, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. Sound Anchors Speaker Stands help make proper speaker placement possible so that you can get the sound right. The common solutions (shelves and wall mounts) are partial solutions but they hardly ever work really well. They seldom position your monitors exactly where they need to be for best sound and usually have other problems as well.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSound Anchors Large Adjustable Monitor Stands\u003c\/span\u003e are designed to support main or midfield monitors in moderate sized control rooms for music, surround sound monitoring or CD mastering. They are also very well suited for use in radio and television broadcasting studios, film post production facilities\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSound Anchors Large Adjustable Stands\u003c\/span\u003e are hand crafted in the USA. They are made of large section rectangular and square steel tubing. Their design and construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbathane pads are provided for use between the speaker and stand. Sound Anchors Large Adjustable Monitor Stands are shipped hollow but we suggest that they be filled with shot and or sand to eliminate resonances and add mass (Sound Anchors do this for you with their smaller stands but these stands do not ship well filled). The lower cross piece on the Large Adjustable Monitor Stands can be used as a shelf to support your power amp. Sound Anchors Large Adjustable Speaker Stands deliver professional performance and professional appearance which makes your studio sound and look more professional.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSound Anchors Large Adjustable Stands\u003c\/span\u003e are sold in pairs in two standard configurations but they are also available in larger sizes for monitors that do not fit on our standard size stands. Sound Anchors can also make special versions of the Large Adjustable stand for use with your video monitors","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449357299815,"sku":"17029","price":889.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_46_adjustable_pair_1.jpg?v=1787088690"},{"product_id":"sound-anchor-adjustable-46-large-monitor-stands-pair","title":"Sound Anchors ADMID3 46\" Monitor Stand for 30-39\" Wide Speakers - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors ADMID3\u003c\/strong\u003e monitor stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003cp\u003eADMID3 stands are custom-made to accommodate monitors with a width between 30-39 inches. Contact us with your speaker's measurements and we'll work with Sound Anchors to get you the exact size you need.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449357332583,"sku":"17028","price":2065.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid-pair-23_17030_1_de492896-379c-416c-b6ec-ec6ca8ed8a4b.jpg?v=1787088690"},{"product_id":"sound-anchor-adjustable-46-small-monitor-stands-pair","title":"Sound Anchors ADMID1 46\" Monitor Stand for 20\" Wide or Less Speakers - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors ADMID1\u003c\/strong\u003e monitor stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003cp\u003eADMID1 stands are custom-made to accommodate monitors with a width between 10-19 inches. Contact us with your speaker's measurements and we'll work with Sound Anchors to get you the exact size you need.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449357365351,"sku":"17030","price":1845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid-pair-23_17030_1_dd95d9f1-ba7c-42d5-a140-350f425c6258.jpg?v=1787088690"},{"product_id":"sound-anchors-barefoot-micromain27-micromain26-stands-pair","title":"Sound Anchors Barefoot MicroMain27 \/ MicroMain26 Stands - Pair","description":"\u003cp\u003eMonitor stand pair built custom by Sound Anchors for Barefoot Sound MicroMain27 or MicroMain26 studio monitors.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eMounting Procedure:\u003c\/h3\u003e\r\n\u003col\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRemove the mounting bracket from the stand and place it on the side of the speaker cabinet. Line up the mounting holes, insert the bolts and finger tighten. If the bolts are too long and bottom out before the bracket is snug against the speaker cabinet, STOP. You may have the wrong size bolts. Contact Vintage King.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSecure the speaker mounting bracket to the stand at desired height.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eAttach MM27 handles the side of cabinet opposite to the side the mounting bracket will attach to. Then set the speaker horizontally on the floor. If your cabinet doesn't have mounting bolt holes on both sides, then set the speaker horizontally between two stacks of books straddling the subwoofer to prevent it from touching the floor.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eTilt the stand down and line up the mounting bracket holes with the cabinet bolt holes.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eInsert bolts and tighten until the mounting bracket is snug against the speaker cabinet. Do not over tighten! If the bolts are too long and bottom out before the bracket is snug, STOP. You may have the wrong size bolts. Contact Vintage King. A good way to ensure you do not over tighten the bolts is to put the long end of the Allen wrench into the bolt and turn it using the short end. Tighten the bolt using no more force than you can apply to the short end of the wrench while holding it in the tips of your thumb and index finger.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCarefully tilt the entire assembly (speaker and stand) back up so it stands vertically.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003ch3 id=\"toc_1\"\u003eSPECS:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBase: 21\" x 17\" x 2\" (L x W x H)\u003c\/li\u003e\r\n\u003cli\u003eStand Height: 56\"\u003c\/li\u003e\r\n\u003cli\u003eTweeter Height Adjustment: 13\" to 54.5\"\u003c\/li\u003e\r\n\u003cli\u003eMaximum clearance Under Speaker (vertical): 44.25\"\u003c\/li\u003e\r\n\u003cli\u003eMaximum Clearance Under Speaker (horizontal): 49\"\u003c\/li\u003e\r\n\u003cli\u003eSpeaker Mount Tilt: 5 degrees up or down\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449387413607,"sku":"7610","price":1180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/barefoot_monitor_stands_pair.jpg?v=1787088811"},{"product_id":"sound-anchor-adjustable-46-small-monitor-stand-single","title":"Sound Anchors ADMID1 46\" Monitor Stand for 20\" Wide or Less Speakers - Single","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors ADMID1\u003c\/strong\u003e monitor stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003cp\u003eADMID1 stands are custom-made to accommodate monitors with a width between 10-19 inches. Contact us with your speaker's measurements and we'll work with Sound Anchors to get you the exact size you need.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449418805351,"sku":"17031","price":870.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid-single-23_17031_1.jpg?v=1787088916"},{"product_id":"sound-anchor-motor-adjustable-start-speaker-stand","title":"Sound Anchors Motor Adjustable Start Speaker Stand - Single","description":"\u003cp\u003e\u003cspan style=\"color: #333333; font-family: arial,helvetica,sans-serif; font-size: small;\"\u003e\u003cspan id=\"internal-source-marker_0.6554932745463208\" style=\"background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eIf you regularly find that you need to get your near-field monitors completely out of sight \u003c\/span\u003e\u003cspan style=\"background-color: transparent; font-weight: bold; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eSound Anchors Motor Adjustable Start Speaker Stands \u003c\/span\u003e\u003cspan style=\"background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eare your very best solution. Push the button and your monitors smoothly drop out of the field of view.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small; font-family: arial,helvetica,sans-serif; color: #333333; background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eSound  Anchor Motor Stands allow the engineer to raise and lower the height of   his near-field monitors right from his listening position. This  feature makes it possible to fine tune monitor height or lower them  completely out of sight if desired.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small; font-family: arial,helvetica,sans-serif; color: #333333; background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eThe  telescopic center column of the Sound Anchors Motor Stand has a powerful  linear actuator inside it to smoothly raise and lower the speaker. The  wired remote control unit precisely controls the up and down motion of  two speaker stands. The stands are synchronized  to move at exactly the  same speed and when stopped they will stop at the same height. The  control module is made to be fastened to any flat surface The power  supply\/logic module can be hung under the mixer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small; font-family: arial,helvetica,sans-serif; color: #333333; background-color: transparent; font-weight: normal; font-style: normal; font-variant: normal; text-decoration: none; vertical-align: baseline;\"\u003eSound  Anchor Motor Stands are designed to support near-field monitors  behind  consoles in control rooms for music, surround sound monitoring or CD  mastering. They are also very well suited for use in radio and  television broadcasting studios as well as film post production  facilities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449419198567,"sku":"19063","price":1780.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_adjustable_moto_b6d7dece-f66b-497a-b6c6-7170c16725ae.jpg?v=1787088917"},{"product_id":"sound-anchor-adj-44-monitor-stand-pair-10x14-demo-deal","title":"Sound Anchors Adj. 44\" Monitor Stand Pair - 10x14 (Demo Deal)","description":"\u003cp\u003eWhen monitors are positioned properly on rigid stable platforms they work better. The entire soundfield is more clear tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. Sound Anchors Stands help make proper speaker placement possible so that you can get the sound right. The common solutions (shelves and wall mounts) are partial solutions but they do not isolate your electronics from your monitors or your monitors from each other. Along with these two drawbacks they seldom position your monitors exactly where they need to be for best sound.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e Height: Adjustable 6\" to 45\" standard (others available as special order)\u003cbr\u003e Width at Floor: 14\" when set up for max overhang or 17\" when set up for tilt\u003cbr style=\"font-weight: bold;\"\u003e Depth at Floor: 17\" when set up for max overhang or 14\" when set up for tilt\u003cbr\u003e Platform size: 10\" x 12\" or 10\" x 14\"\u003cbr\u003e \u003cbr\u003e Sound Anchors Adjustable Monitor Stands are designed to support near-field monitors behind the console in control rooms for music, surround sound monitoring or CD mastering. They are also very well suited for use in radio and television broadcasting studios as well as film post production facilities\u003cbr\u003e \u003cbr\u003e Sound Anchors Adjustable Speaker Stands are hand crafted in the USA. They are made of large section rectangular and square steel tubing. Their all welded one piece construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors professional performance. They also give Sound Anchors Adjustable Stands professional appearance which makes you look professional. Sound Anchors Adjustable Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449471070311,"sku":"29158","price":1239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchor_45_inch_adjustable_1_39913a3f-b76e-47ba-a692-fae7837240e3.jpg?v=1787089080"},{"product_id":"barefoot-sound-micromain27-stands-pair-demo-deal","title":"Barefoot Sound MicroMain27 Stands - Pair (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eBuilt custom by Sound Anchors for Barefoot Sound MicroMain27s\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStand Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase: 21\"x17\"x2\" (LxWxH) \u003c\/li\u003e\n\u003cli\u003eStand Height: 56\" \u003c\/li\u003e\n\u003cli\u003eTweeter Height Adjustment: 13\" to 54.5\" \u003c\/li\u003e\n\u003cli\u003eMaximum clearance Under Speaker (vertical): 44.25\" \u003c\/li\u003e\n\u003cli\u003eMaximum Clearance Under Speaker (horizontal): 49\" \u003c\/li\u003e\n\u003cli\u003eSpeaker Mount Tilt: 5 degrees up or down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSound Anchors Stand Mounting Procedure \u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e 1. Remove the mounting bracket from the stand and place it on the side of the speaker cabinet. Line up the mounting holes, insert the bolts and finger tighten. If the bolts are too long and bottom out before the bracket is snug against the speaker cabinet, STOP. You may have the wrong size bolts. Contact Vintage King. \u003cbr\u003e\u003cbr\u003e 2. Secure the speaker mounting bracket to the stand at desired height. \u003cbr\u003e\u003cbr\u003e 3. Attach MM27 handles the side of cabinet opposite to the side the mounting bracket will attach to. Then set the speaker horizontally on the floor. \u003cbr\u003e\u003cbr\u003e * If your cabinet doesn't have mounting bolt holes on both sides, then set the speaker horizontally between two stacks of books straddling the subwoofer to prevent it from touching the floor. \u003cbr\u003e\u003cbr\u003e 4. Tilt the stand down and line up the mounting bracket holes with the cabinet bolt holes. \u003cbr\u003e\u003cbr\u003e 5. Insert bolts and tighten until the mounting bracket is snug against the speaker cabinet. Do not over tighten! If the bolts are too long and bottom out before the bracket is snug, STOP. You may have the wrong size bolts. Contact Vintage King. \u003cbr\u003e\u003cbr\u003e * A good way to ensure you do not over tighten the bolts is to put the long end of the Allen wrench into the bolt and turn it using the short end. Tighten the bolt using no more force than you can apply to the short end of the wrench while holding it in the tips of your thumb and index finger. \u003cbr\u003e\u003cbr\u003e 6. Carefully tilt the entire assembly (speaker and stand) back up so it stands vertically.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449651916903,"sku":"16144","price":860.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/barefoot_monitor_stands_pair_2_48244ff5-9b7a-49f4-b510-8889df82f556.jpg?v=1787089845"},{"product_id":"sound-anchors-adj1-adjustable-32-monitor-stand-pair-used","title":"Sound Anchors ADJ1 Adjustable 32\" Monitor Stand Pair (Used)","description":"Adjustable 32\" monitor stands w\/ 10x10 Platform.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449657323623,"sku":"40641","price":395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_adj1_adjustable_32__monitor_stand_pair__used__4116122_88d85eee-ab74-4a89-b66f-dd3459f020bb.jpg?v=1787089868"},{"product_id":"sound-anchors-adj1-44-stand-10x14-single-demo-deal","title":"Sound Anchors ADJ1 44\" Stand - 10x14 Single (Demo Deal)","description":"\u003cp\u003eWhen monitors are positioned properly on rigid stable platforms they work better. The entire soundfield is more clear tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. Sound Anchors Stands help make proper speaker placement possible so that you can get the sound right. The common solutions (shelves and wall mounts) are partial solutions but they do not isolate your electronics from your monitors or your monitors from each other. Along with these two drawbacks they seldom position your monitors exactly where they need to be for best sound.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e Height: Adjustable 6\" to 45\" standard (others available as special order)\u003cbr\u003e Width at Floor: 14\" when set up for max overhang or 17\" when set up for tilt\u003cbr style=\"font-weight: bold;\"\u003e Depth at Floor: 17\" when set up for max overhang or 14\" when set up for tilt\u003cbr\u003e Platform size: 10\" x 12\" or 10\" x 14\"\u003cbr\u003e \u003cbr\u003e Sound Anchors Adjustable Monitor Stands are designed to support near-field monitors behind the console in control rooms for music, surround sound monitoring or CD mastering. They are also very well suited for use in radio and television broadcasting studios as well as film post production facilities\u003cbr\u003e \u003cbr\u003e Sound Anchors Adjustable Speaker Stands are hand crafted in the USA. They are made of large section rectangular and square steel tubing. Their all welded one piece construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors Adjustable Monitor Stands are pre-filled using our proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors professional performance. They also give Sound Anchors Adjustable Stands professional appearance which makes you look professional. Sound Anchors Adjustable Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449696219239,"sku":"43906","price":295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_adj1_single_2d0e1c92-0447-4f33-929f-b2c67fe99c9a.jpg?v=1787090025"},{"product_id":"sound-anchors-adj1-32-monitor-stand-pair-vk-295-used","title":"Sound Anchors ADJ1  32\" Monitor Stand Pair #VK-295 (Used)","description":"Adjustable 32\" monitor stands w\/ 10x10 Platform.\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note: \u003c\/strong\u003e\u003cspan style=\"color: #000000;\"\u003eStock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449714634855,"sku":"44866","price":395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_adj1__32__monitor_stand_pair__vk-295__used__4771875_363fed48-b148-4c7c-b4ee-fef4aea28b61.jpg?v=1787090110"},{"product_id":"sound-anchors-barefoot-mm27-gen1-stands-used","title":"Sound Anchors Barefoot MM27 Gen1 Stands (Used)","description":"\u003cp\u003eNear mint condition pair of custom stands.\u003c\/p\u003eStock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449756119143,"sku":"37397","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_barefoot_mm27_gen1_stands__used__5250047_c987afa3-51db-4887-b404-87de45c73ee6.jpg?v=1787090278"},{"product_id":"sound-anchors-barefoot-mm27-stands-vk869-vk870-used","title":"Sound Anchors Barefoot MM27 Stands #VK869\/VK870 (Used)","description":"Sound Anchor ADJ-27 STANDS are designed to make proper placement of your Barefoot MM27 monitors possible. These stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. \u003cbr\u003e\u003cbr\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003cbr\u003e\u003cbr\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003cbr\u003e\u003cbr\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449777385575,"sku":"50580","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_barefoot_mm27_stands__vk869_vk870__used__5250047_a1050a07-0265-48f1-bbb4-9a086af09c06.jpg?v=1787090366"},{"product_id":"sound-anchors-barefoot-mm27-stands-vka005vka006-used","title":"Sound Anchors Barefoot MM27 Stands #VKA005\/VKA006 (Used)","description":"Sound Anchor ADJ-27 STANDS are designed to make proper placement of your Barefoot MM27 monitors possible. These stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. \u003cbr\u003e\u003cbr\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003cbr\u003e\u003cbr\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003cbr\u003e\u003cbr\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449895153767,"sku":"54436","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-mm27-stands-vka005vka006-used-5971298_33f303f8-ce7f-4b53-97f1-e0e3212eacd2.jpg?v=1787090853"},{"product_id":"sound-anchors-admid3-46","title":"Sound Anchors ADMID3-46","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchor ADMID3-46\u003c\/strong\u003e Stands make proper placement of main and midfield monitors possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e  \u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003cp\u003eSound Anchor ADMID Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing, rectangular steel tubing and 1\/2\" steel bar. Sound Anchor ADMID stands bolt together using large grade 8 fasteners. They are strong, rigid and stable. They are spiked at the floor to anchor your speakers in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADMID Adjustable Monitor Stands can be filled sand, shot, or kitty litter to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and these Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADMID Monitor Stands are the tools of choice when you need to support large monitors in your high performance recording studio.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449916715111,"sku":"34872","price":1089.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid3-46-1_3787b01e-81af-4bec-b5ab-6b11a5c3f8ca.jpg?v=1787090943"},{"product_id":"sound-anchors-adj3-44-speaker-mount","title":"Sound Anchors ADJ3 44\" Adjustable Monitor Stand with Two Speaker Platforms - Pair","description":"\u003cp\u003e\u003cstrong\u003eSound Anchors ADJ3\u003c\/strong\u003e monitor stands are fully adjustable and are designed to allow you to mount two speakers per stand. These stands allow independent height and tilt adjustment of both monitors. The ADJ3 stand is based on the proven ADJ1 stands and offers all of the same performance benefits. The symmetrical bases and the uprights are filled and damped from the factory. This makes the ADJ3 a very solid and stable support for your speakers. The speaker platforms are made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ3 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449916813415,"sku":"34201","price":1848.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj3-pair-23_34201_1_3fd17ed9-47dd-455c-8690-398c721280d6.jpg?v=1787090943"},{"product_id":"sound-anchors-adj2-adjustable-44-monitor-stand-pair","title":"Sound Anchors ADJ2 44\" Adjustable Monitor Stand with 12x16 Platform - Pair","description":"\u003cp\u003e\u003cstrong\u003eSound Anchors ADJ2\u003c\/strong\u003e monitor stands are fully adjustable and are designed to allow you to correctly place a pair of monitors behind the console for best sound. For increased flexibility these studio monitor stands allow height and tilt adjustment of the monitors. The ADJ2 features a wider base than the ADJ1. The 17\" x 23\" bases and the uprights are filled and dampened from the factory. ADJ2 stands offer a very solid and stable support for your speakers. ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMusic control rooms\u003c\/li\u003e\r\n\u003cli\u003eSurround sound monitoring\u003c\/li\u003e\r\n\u003cli\u003eCD mastering\u003c\/li\u003e\r\n\u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e\r\n\u003cli\u003eFilm post production\u003c\/li\u003e\r\n\u003cli\u003eVideo game production\u003c\/li\u003e\r\n\u003cli\u003eOnline audio production\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449916846183,"sku":"34649","price":1502.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj2-pair-23_34649_1_77ceded3-2cdc-48a6-9dd5-10f797220cd2.jpg?v=1787090943"},{"product_id":"sound-anchors-adj1-56-monitor-stand-10x14-single","title":"Sound Anchors ADJ1 56\" Adjustable Monitor Stand with 10x14\" Platform - Single","description":"\u003cp\u003e\u003cstrong\u003eSound Anchors ADJ1\u003c\/strong\u003e monitor stands are fully adjustable and are designed to allow you to correctly place a pair of monitors behind the console for best sound. For increased flexibility these studio monitor stands allow height and tilt adjustment of the monitors. The 14\" x 17\" bases and the uprights are filled and dampened from the factory. ADJ1 stands offer a very solid and stable support for your speakers. The speaker platform is made of 1\/4\" thick aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor ADJ1 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449923825767,"sku":"42765","price":901.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj1-single-23_42765_1_5a8ffc7c-53aa-43da-ad21-15bda4d17695.jpg?v=1787090971"},{"product_id":"sound-anchors-barefoot-mm27-stands-tbd-used","title":"Sound Anchors Barefoot MM27 Stands #TBD (Used)","description":"Sound Anchor ADJ-27 STANDS are designed to make proper placement of your Barefoot MM27 monitors possible. These stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. \u003cbr\u003e\u003cbr\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003cbr\u003e\u003cbr\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003cbr\u003e\u003cbr\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note:\u003c\/strong\u003e Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449972289639,"sku":"57813","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-mm27-stands-tbd-used-6294417_642b7325-fb33-4cf4-aeb1-76d1fe0a68b9.jpg?v=1787091159"},{"product_id":"sound-anchors-barefoot-mm27-stands-vka0066vka0067-used","title":"Sound Anchors Barefoot MM27 Stands #VKA0066\/VKA0067 (Used)","description":"Sound Anchor ADJ-27 STANDS are designed to make proper placement of your Barefoot MM27 monitors possible. These stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. \u003cbr\u003e\u003cbr\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003cbr\u003e\u003cbr\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003cbr\u003e\u003cbr\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note:\u003c\/strong\u003e Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449986445415,"sku":"60379","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-mm27-stands-vka0066vka0067-used-6294417_1866433d-24fd-4fe9-b003-d60dbb54f802.jpg?v=1787091213"},{"product_id":"sound-anchors-adj1-adjustable-32-monitor-stand-10x10-pair","title":"Sound Anchors ADJ1 Adjustable 32 Monitor Stand-10x10 - Pair","description":"\u003cp\u003eWhen monitors are positioned properly on rigid stable platforms they work better. The entire sound-field is more clear tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. \u003cstrong\u003eSound Anchors ADJ1 Adjustable Monitor Stands\u003c\/strong\u003e help make proper speaker placement possible so that you can get the sound right. The common solutions (shelves and wall mounts) are partial solutions but they do not isolate your electronics from your monitors or your monitors from each other. Along with these two drawbacks they seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e  \u003ch3\u003eSpecifications:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eHeight: Adjustable 6\" to 32\"\" standard (others available as special order)\u003c\/li\u003e \u003cli\u003eWidth at Floor: 10\"\u003c\/li\u003e \u003cli\u003eDepth at Floor: 10\"\u003c\/li\u003e \u003cli\u003ePlatform size: 10\" x 10\"\u003c\/li\u003e \u003c\/ul\u003e   \u003cp\u003eSound Anchors Adjustable Monitor Stands are designed to support near-field monitors behind the console in control rooms for music, surround sound monitoring or CD mastering. They are also very well suited for use in radio and television broadcasting studios as well as film post production facilities\u003c\/p\u003e  \u003cp\u003eSound Anchors Adjustable Speaker Stands are hand crafted in the USA. They are made of large section rectangular and square steel tubing. Their all welded one piece construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors Adjustable Monitor Stands are pre-filled using proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors professional performance. They also give Sound Anchors Adjustable Stands professional appearance which makes you look professional. Sound Anchors Adjustable Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44449999224935,"sku":"35613","price":616.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj1_35613_1_9c98e233-336a-4137-b27f-0081be859163.jpg?v=1787091266"},{"product_id":"sound-anchors-barefoot-footprint01-stand-44-fixed-pair","title":"Sound Anchors 44\" Fixed Monitor Stand with 8\" x 12\" Platform - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors 44\" Fixed Monitor Stand with 8\" x 12\" Platform\u003c\/strong\u003e make proper speaker placement in any studio space possible. When monitors are positioned properly on rigid stable platforms they work better, period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\r\n\u003cp\u003eThis stand is a fixed height unit. It is available here as a pair with 44\" height for installations where a higher placement is necessary to clear a console meter bridge. It features a 8\" wide x 12\" deep speaker platform and a highly stable four-point 14\" x 14\" base. The top platform is custom fitted to the size of the Footprint01's base but can be used as speaker stand for a host of different studio monitors.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450082750567,"sku":"76906","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot01-21_76906_1_fcf707ed-549e-4905-b989-fb4cb2c7a469.jpg?v=1787091628"},{"product_id":"sound-anchors-barefoot-footprint01-stand-44-fixed-single","title":"Sound Anchors 44\" Fixed Monitor Stand with 8\" x 12\" Platform - Single","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors 44\" Fixed Monitor Stand with 8\" x 12\" Platform\u003c\/strong\u003e make proper speaker placement in any studio space possible. When monitors are positioned properly on rigid stable platforms they work better, period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\r\n\u003cp\u003eThis stand is a fixed height unit. It is available here as a pair with 44\" height for installations where a higher placement is necessary to clear a console meter bridge. It features a 8\" wide x 12\" deep speaker platform and a highly stable four-point 14\" x 14\" base. The top platform is custom fitted to the size of the Footprint01's base but can be used as speaker stand for a host of different studio monitors.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450082783335,"sku":"76907","price":360.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-single-1_2d0afd89-45df-440e-b8c6-e7c40983e6f7.jpg?v=1787091628"},{"product_id":"sound-anchors-barefoot-footprint01-stand-38-fixed-single","title":"Sound Anchors 38\" Fixed Monitor Stand with 8\" x 12\" Platform - Single","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors 38\" Fixed Monitor Stand with 8\" x 12\" Platform \u003c\/strong\u003emake proper speaker placement in any studio space possible. When monitors are positioned properly on rigid stable platforms they work better, period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\r\n\u003cp\u003eThis stand is a fixed height unit. It is available here as a pair with 38\" height for installations where a higher placement is necessary to clear a console meter bridge. It features a 8\" wide x 12\" deep speaker platform and a highly stable four-point 14\" x 14\" base. The top platform is custom fitted to the size of the Footprint01's base but can be used as speaker stand for a host of different studio monitors.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450082816103,"sku":"76909","price":396.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-single-1_50dc22f4-c7e3-4d9e-a90a-c24b727e6900.jpg?v=1787091629"},{"product_id":"sound-anchors-barefoot-footprint01-stand-38-fixed-pair","title":"Sound Anchors 38\" Fixed Monitor Stand with 8\" x 12\" Platform - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors 38\" Fixed Monitor Stand with 8\" x 12\" Platform \u003c\/strong\u003emake proper speaker placement in any studio space possible. When monitors are positioned properly on rigid stable platforms they work better, period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\r\n\u003cp\u003eThis stand is a fixed height unit. It is available here as a pair with 38\" height for installations where a higher placement is necessary to clear a console meter bridge. It features a 8\" wide x 12\" deep speaker platform and a highly stable four-point 14\" x 14\" base. The top platform is custom fitted to the size of the Footprint01's base but can be used as speaker stand for a host of different studio monitors.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450082848871,"sku":"76908","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-footprint01-stand-pair-21_76908_1_e6f905a1-4a95-462b-b051-b4d310cab00e.jpg?v=1787091628"},{"product_id":"sound-anchor-adj4-44-speaker-stands-vka0163-used","title":"Sound Anchor ADJ2 44\" Speaker Stands #VKA0163 (Used)","description":"Sound Anchor Stands make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. \u003cbr\u003e\u003cbr\u003eSound Anchor Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor Monitor Stands are the best tools for supporting the monitors in your high performance recording studio. \u003cbr\u003e\u003cbr\u003e10\"x14\" platform","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450086420583,"sku":"72744","price":450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-adj2-44_-speaker-stands-vka0163-used-7408451_1a1683c1-3da8-48ba-aba1-9d079bc925ba.jpg?v=1787091644"},{"product_id":"sound-anchor-admid-60-x31-speaker-stands-vka0164-used","title":"Sound Anchor ADMID 60\"x31\" Speaker Stands #VKA0164 (Used)","description":"Sound Anchor Stands make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. \u003cbr\u003e\u003cbr\u003eSound Anchor Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor Monitor Stands are the best tools for supporting the monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450110111847,"sku":"72742","price":450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_72742_1_2311ad86-c716-4178-bc82-bd9cecddf954.jpg?v=1787091732"},{"product_id":"sound-anchor-admid-72-x32-5-speaker-stands-vka0165-used","title":"Sound Anchor ADMID 72\"x32.5\" Speaker Stands #VKA0165 (Used)","description":"Sound Anchor Stands make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. \u003cbr\u003e\u003cbr\u003eSound Anchor Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor Monitor Stands are the best tools for supporting the monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450110144615,"sku":"72743","price":550.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_72743_1_55e5bc72-f264-4cfd-aa03-835e6c15f9d6.jpg?v=1787091732"},{"product_id":"sound-anchors-barefoot-mm27-gen1-stands-vka0201-used","title":"Sound Anchors Barefoot MM27 Gen1 stands #VKA0201 (Used)","description":"Near mint condition pair of custom stands.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450124431463,"sku":"42494","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-mm27-gen1-stands-vka0201-used_42494_1_9117376e-71b0-4159-9ff5-89efedccda01.jpg?v=1787091795"},{"product_id":"sound-anchors-conecoaster-demo-deal","title":"Sound Anchors ConeCoaster (Demo Deal)","description":"If you have expensive hardwood or tile floors the last thing you want to do is place a heavy object with spikes directly on it. This is even more important with fine furniture. Your beautiful surfaces can be ruined beyond repair. Why would you want to compromise the sound quality of your system?\u003cbr\u003e \u003cbr\u003e If you have a reference music system you will seriously limit your systems performance if you choose to not use spikes or cones with it. So what can you do that will make it possible to use spikes on your hardwood or tile?\u003cbr\u003e \u003cbr\u003e Sound Anchors Has The Answer\u003cbr\u003e Sound Anchors has been the leader in the development and production of high performance speaker stands since their very beginnings. Their stands have a reputation for superior sound and are used by audiophiles and studio professionals alike. All Sound Anchors Speaker Stands and Component Stands are spiked at the floor. Sound Anchors has done a great deal of research into what happens at the interface between speaker and floor. They realized that whatever you put between a spike and the floor must be rigid as not to allow any movement. It must also be poor at transferring energy into the floor. If the device is too good at transferring energy the floor will become a sounding board and distort.\u003cbr\u003e \u003cbr\u003e The Sound Anchors Solution\u003cbr\u003e Sound Anchors Conecoasters protect your floors and limit energy transfer thus improving system performance. Sound Anchors Conecoasters are designed so that they will accept either down pointing or up pointing cones. This gives you more options when tuning your audio system.\u003cbr\u003e \u003cbr\u003e Sound Anchors Conecoasters are made of two dissimilar materials. The upper (hard) part is made of super high quality stainless steel. It has no plating or surface coating to tarnish, discolor or come off. The lower (soft) part is made of a special ultra high density Polyester felt which was specially developed to restrict energy transfer in the audio band. It is a high loss low compliance material. It will not break down, soften or leave marks. This material will not harm wood or tile in any way.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450126037095,"sku":"80244","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchor_conecoaster_1_b8bbacfe-007c-483b-b9b7-ce5c78490442.jpg?v=1787091802"},{"product_id":"sound-anchors-barefoot-mm27-stands-vka0218-used","title":"Sound Anchors Barefoot MM27 Stands #VKA0218 (Used)","description":"Sound Anchor ADJ-27 STANDS are designed to make proper placement of your Barefoot MM27 monitors possible. These stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. \u003cbr\u003e\u003cbr\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003cbr\u003e\u003cbr\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003cbr\u003e\u003cbr\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450150416487,"sku":"80138","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-mm27-stands-vka0218-used_80138_1_ec2a1758-6c0d-492f-b64c-7d5afd2ba8a4.jpg?v=1787091885"},{"product_id":"sound-anchors-adj2-adjustable-32-stands-vka0229-used","title":"Sound Anchors ADJ2 Adjustable 32\" Stands #VKA0229 (Used)","description":"Pair of adjustable monitor stands for small and mid sized monitors.\u003cdiv style=\"font-family: arial;\"\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv style=\"font-family: arial;\"\u003e\n\u003cp\u003eThe \u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eSound Anchor ADJ2 Stands are designed to make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better and the sound is enhanced. The entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ1 is great for most speakers but for any application where the speaker is too large for the ADJ1 stand but is not quite large enough to require the Sound Anchor ADMID stand, the ADJ2 is the best stand. The ADJ2 is ideally suited to the new breed of mid sized super monitors that have recently become popular in studios.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ADJ2 stand features the same exact look as the ADJ1. The main difference between them is the dimensions of the base. The base of the ADJ2 stand is 17\" X 23\". This stand works best for speakers that have a width no wider than 24 inches and a depth no greater than 18 inches. Smaller speakers will also work on the ADJ2s. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these three drawbacks.\u003c\/p\u003e\n\u003cp\u003eThe Sound Anchors ADJ2 stands allow the engineer to correctly place a pair of monitors behind his console. These stands allow height and tilt adjustment of the monitors. The 14\" x 17\" base and the upright are filled and damped from the factory. ADJ2 stands offer a very solid, stable and non-resonant support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\n\u003cp\u003eSound Anchor ADJ2 stands are ideal for:\u003c\/p\u003e\n\u003col style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; list-style-position: outside; list-style-image: initial; color: rgb(68, 68, 68); font-family: Helvetica, Arial, sans-serif; font-size: 16px; font-variant-ligatures: no-common-ligatures; background-color: rgb(255, 255, 255);\"\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eMusic control rooms.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eSurround sound monitoring.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eCD mastering.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eRadio and television broadcasting studios.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eFilm post production.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eVideo game production.\u003c\/li\u003e\n\u003cli style=\"box-sizing: border-box; margin: 0px 0px 0px 2em; padding: 0px;\"\u003eOnline audio production.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSound Anchor ADJ2 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. The structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors ADJ2 stands are pre-filled using the proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ2 Monitor Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450176860263,"sku":"84213","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj2-adjustable-32_E2_80_9D-stands-vka0229-used_84213_1_b0776f76-8a60-4a9a-85ba-060571e43176.jpg?v=1787091997"},{"product_id":"barefoot-footprint-01-stand-44-fixed-pair-demo-deal","title":"Sound Anchors 44\" Fixed Monitor Stand for Barefoot Footprint01 - Pair (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eBarefoot Footprint01\u003c\/strong\u003e custom stands by Sound Anchor make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better, period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. With the extended low frequency response of the Barefoot Footprint01's, it becomes even more important to decouple that energy from the floor and any surrounding structure; the only way to do this is with a quality rigid and heavy duty stand.\u003c\/p\u003e  \u003cp\u003eThe Barefoot Footprin01 by Sound Anchor stand is a fixed height unit. It is available in the two most commonly requested heights of 44\" (for installations where a higher placement is necessary to clear a console meter bridge) or 38\" (for more low profile table level workstations). They have a four point highly stable 14\" x 14\" base. The top platform is custom fitted to the size of the Footprint01's base.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450181873767,"sku":"91028","price":351.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-pair-1_1_f30070ac-0b28-45c2-b29f-8f2291d5c94e.jpg?v=1787092017"},{"product_id":"barefoot-footprint-01-stand-38-fixed-pair-demo-deal","title":"Sound Anchors 38\" Fixed Monitor Stand for Barefoot Footprint01 - Pair (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eBarefoot Footprint01\u003c\/strong\u003e custom stands by Sound Anchor make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better, period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. With the extended low frequency response of the Barefoot Footprint01's, it becomes even more important to decouple that energy from the floor and any surrounding structure; the only way to do this is with a quality rigid and heavy duty stand.\u003c\/p\u003e  \u003cp\u003eThe Barefoot Footprin01 by Sound Anchor stand is a fixed height unit. It is available in the two most commonly requested heights of 44\" (for installations where a higher placement is necessary to clear a console meter bridge) or 38\" (for more low profile table level workstations). They have a four point highly stable 14\" x 14\" base. The top platform is custom fitted to the size of the Footprint01's base.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450188918887,"sku":"94684","price":333.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-pair-1_2_c1be7d87-ac62-4475-b0f2-1e36560d0135.jpg?v=1787092047"},{"product_id":"sound-anchor-speaker-stands-vk0001-vk0002-used","title":"Sound Anchor Speaker Stands #VK0001\/VK0002 (Used)","description":"Sound Anchor Stands make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. \u003cbr\u003e\u003cbr\u003eSound Anchor Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor Monitor Stands are the best tools for supporting the monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450191900775,"sku":"49732","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-speaker-stands-vk0001-vk0002-used_49732_1_6e4afe81-11f8-401c-8797-cb6a4851ca1c.jpg?v=1787092061"},{"product_id":"sound-anchors-barefoot-mm27-gen1-stands-vka0237-used","title":"Sound Anchors Barefoot MM27 GEN1 Stands #VKA0237 (Used)","description":"Sound Anchor ADJ-27 STANDS are designed to make proper placement of your Barefoot MM27 monitors possible. These stands will make your MM27s work better in your studio. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. \u003cbr\u003e\u003cbr\u003eThe base of the Sound Anchor ADJ-27 stand is shared with the ADJ2 and it is 17\"wide X 23\"deep. The uprights are 56\" tall. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) do not work with the MM27 speakers. Besides not supporting the speakers the way that they were designed to, they do not isolate the MM27s from the electronics, the other monitors or the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these four drawbacks.\u003cbr\u003e\u003cbr\u003eThe Sound Anchors MM27 stands allow the engineer to correctly place a pair of monitors behind his console in either the vertical or horizontal position. These stands allow height and tilt adjustment of the monitors. The base and the upright are filled and damped at the factory. MM27 stands offer a very solid, stable and non-resonant support for your speakers. The speaker support is made of 1\/8\" wall steel tube, 1\/2\" steel bar and 3\/8\" steel bar. The Sound Anchor ADJ-27 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003cbr\u003e\u003cbr\u003eSound Anchor ADJ-27 Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. Our structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Sound Anchors ADJ-27 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance. Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ-27 Monitor Stands are the best tools for supporting Barefoot MM27 monitors in your high performance recording studio.","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450235023463,"sku":"89659","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-barefoot-mm27-gen1-stands-vka0237-used_89659_1_bb9fa4b5-9418-40f1-bc66-c3e5908c5ff3.jpg?v=1787092248"},{"product_id":"sound-anchors-project-4-stand","title":"Sound Anchors Project 4 Stand - 42\" with 10\" x 8\" Top Plate","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors Project 4 Stand\u003c\/strong\u003e makes proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better period.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\r\n\r\n\u003cp\u003eProject Stands are Sound Anchors' entry level professional studio stands. They are designed to give the semi pro or hobbyist audio recording engineer a cost effective high performance monitor stand for his studio.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSound Anchor Project 4 Speaker Stands are hand crafted in the USA. They are made of large section square steel tube rectangular steel tube and 1\/4\" steel plate. Sound Anchor Project 4 Stands have one piece all welded construction which makes them strong, rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbathane pads are provided for use between the speaker and stand. Sound Anchors Project 4 Stands can be filled with sand, shot or kitty litter by the end user to reduce resonance and add mass.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eApplications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eHome \"project\" studios\u003c\/li\u003e\r\n\u003cli\u003eSurround sound monitoring\u003c\/li\u003e\r\n\u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e\r\n\u003cli\u003eVideo game production\u003c\/li\u003e\r\n\u003cli\u003eOnline audio production\u003c\/li\u003e\r\n\u003cli\u003eHome theater rear channel\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450239512679,"sku":"16086","price":505.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-project-4_16086_1_1_75206d15-ef5f-4160-8226-a574203ddcdc.jpg?v=1787092267"},{"product_id":"sound-anchors-leveling-mount","title":"Sound Anchors Leveling Mount","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors Leveling Mount\u003c\/strong\u003e is a heavy duty leveling mount with a removable rubber pad, making them perfect for wood or tile floors. They come standard on the Sound Anchors Mixer Tables and Computer Workstations. They have the same 3\/8-16 threaded stems which means that they will fit any Sound Anchor Studio Stand.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450404565095,"sku":"10303","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-levelling-mount_10303_1_a3d26e96-15a1-42d6-803a-85f57504f0c9.jpg?v=1787092927"},{"product_id":"sound-anchor-daw1x-digital-audio-workstation-stand","title":"Sound Anchors DAW1x-1025 Digital Audio Workstation Stand","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors DAW1x-1025 Digital Audio Workstation Stand\u003c\/strong\u003e is a highly-specialized stand that has been designed to support a flat screen monitor, keyboard and mouse in the recording studio.\u003c\/p\u003e\r\n\u003cp\u003eThe Sound Anchor DAW1X is heavy and balanced and ready to stand up to wear and tear. The keyboard platform and video mount are height-adjustable independent of each other. This feature accommodates different chair positions and engineers of different sizes. The DAW1X is an indispensable tool for the serious audio engineer.\u003c\/p\u003e\r\n\u003cp\u003eCompact and portable, the DAW1X can be stored out of the way when not in use and can be easily converted to a DAW2X by adding a second REDMOUNT and double support arms. This conversion is available as a complete kit.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450466693223,"sku":"100311","price":1271.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-daw1x_100311_1_f26a47cd-936a-4afc-bee4-9acf669d5e82.jpg?v=1787093177"},{"product_id":"sound-anchors-adjustable-46-small-monitor-stands-pair-demo-deal","title":"Sound Anchors Adjustable 46\" Small Monitor Stands - Pair (Demo Deal)","description":"When your monitors are positioned properly on rigid stable platforms your entire sound-field is more clear, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. Sound Anchors Speaker Stands help make proper speaker placement possible so that you can get the sound right. The common solutions (shelves and wall mounts) are partial solutions but they hardly ever work really well. They seldom position your monitors exactly where they need to be for best sound and usually have other problems as well.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSound Anchors Large Adjustable Monitor Stands\u003c\/span\u003e are designed to support main or midfield monitors in moderate sized control rooms for music, surround sound monitoring or CD mastering. They are also very well suited for use in radio and television broadcasting studios, film post production facilities\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSound Anchors Large Adjustable Stands\u003c\/span\u003e are hand crafted in the USA. They are made of large section rectangular and square steel tubing. Their design and construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbathane pads are provided for use between the speaker and stand. Sound Anchors Large Adjustable Monitor Stands are shipped hollow but we suggest that they be filled with shot and or sand to eliminate resonances and add mass (Sound Anchors do this for you with their smaller stands but these stands do not ship well filled). The lower cross piece on the Large Adjustable Monitor Stands can be used as a shelf to support your power amp. Sound Anchors Large Adjustable Speaker Stands deliver professional performance and professional appearance which makes your studio sound and look more professional.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSound Anchors Large Adjustable Stands\u003c\/span\u003e are sold in pairs in two standard configurations but they are also available in larger sizes for monitors that do not fit on our standard size stands. Sound Anchors can also make special versions of the Large Adjustable stand for use with your video monitors","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450510274663,"sku":"130362","price":1559.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound_anchors_46_adjustable_pair_3_05a58c8b-ab9c-42b2-af3c-e034f0e9b479.jpg?v=1787093352"},{"product_id":"sound-anchors-adj2-adjustable-56-monitor-stand-single","title":"Sound Anchors ADJ2 56\" Adjustable Monitor Stand with 12x16 Platform - Single","description":"\u003cp\u003e\u003cstrong\u003eSound Anchors ADJ2\u003c\/strong\u003e monitor stands are fully adjustable and are designed to allow you to correctly place a pair of monitors behind the console for best sound. For increased flexibility these studio monitor stands allow height and tilt adjustment of the monitors. The ADJ2 features a wider base than the ADJ1. The 17\" x 23\" bases and the uprights are filled and dampened from the factory. ADJ2 stands offer a very solid and stable support for your speakers. ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450517090407,"sku":"64534","price":970.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-adj2-single-23_64534_1_f5d9ad80-6c40-49e6-9c54-86332b204cbb.jpg?v=1787093382"},{"product_id":"sound-anchors-compadj-compact-adjustable-monitor-stand-pair","title":"Sound Anchors COMPADJ Compact Adjustable Monitor Stand - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchor COMPADJ Monitor Stands\u003c\/strong\u003e are a special version of Sound Anchors' Adjustable Monitor Stands that are designed for applications where an adjustable stand is needed but there is not enough space for ADJ1 stands. This stand is only 10\" deep at the floor. It is height adjustable from 35\" to 47\" but the plate can't be tilted. The Sound Anchor COMPADJ Monitor stand will support speakers with base dimensions 10\" X 10\" or smaller.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Sound Anchors Compact Adjustable Monitor stands are designed to allow the engineer to correctly place a pair of small monitors in a tight space behind his console. The 14\" wide x 10\" deep base and the upright are filled and damped from the factory. COMPADJ stands offer a very solid support for your speakers. The speaker platform is made of 1\/4\" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor COMPADJ stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSound Anchor COMPADJ stands are ideal for:\u003c\/p\u003e\r\n\r\n\u003col\u003e\r\n\u003cli\u003eMusic control rooms.\u003c\/li\u003e\r\n\u003cli\u003eSurround sound monitoring.\u003c\/li\u003e\r\n\u003cli\u003eCD mastering.\u003c\/li\u003e\r\n\u003cli\u003eRadio and television broadcasting studios.\u003c\/li\u003e\r\n\u003cli\u003eFilm post production.\u003c\/li\u003e\r\n\u003cli\u003eVideo game production.\u003c\/li\u003e\r\n\u003cli\u003eOnline audio production.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\r\n\u003cp\u003eHeights: The default upright height for the COMPADJ is 32\". Speaker Platform Sizes: 10\" X 10\" (default size). \u003c\/p\u003e\r\n\r\n\u003cp\u003eSound Anchor Compact Adjustable Speaker Stands are hand crafted in the USA. They are made of large section square steel tubing and aluminum plate. The structural grade welded construction makes them rigid and stable. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and stand. Sound Anchors COMPADJ Stands are pre-filled using proprietary methods and materials to eliminate resonance and add mass. These features give Sound Anchors top level professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor COMPADJ Stands are cost effective tools for your high performance recording studio.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450552774759,"sku":"31538","price":1386.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-compadj-pair_31538_1_b150009f-2d42-42cc-ba17-22f60b2f1c1a.jpg?v=1787093518"},{"product_id":"sound-anchors-leveling-mount-demo-deal","title":"Sound Anchors Leveling Mount (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors Leveling Mount\u003c\/strong\u003e is a heavy duty leveling mount with a removable rubber pad, making them perfect for wood or tile floors. They come standard on the Sound Anchors Mixer Tables and Computer Workstations. They have the same 3\/8-16 threaded stems which means that they will fit any Sound Anchor Studio Stand.\u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450608382055,"sku":"143401","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-levelling-mount_10303_1_1_14295f7e-1cad-4428-8ef4-6554bcc87743.jpg?v=1787093743"},{"product_id":"sound-anchors-daw-2x-with-2-redmount-vesa-mount","title":"Sound Anchors DAW2X with 2 Redmount Vesa Mount","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchor DAW2X Digital Audio Workstation Stand\u003c\/strong\u003e is a highly specialized stand that has been designed to support 2 flat screen monitors, keyboard and mouse in the recording studio. When Sound Anchors went to work designing a DAW stand they decided that they should start with a clean sheet of paper and do something special. There are a few carts and tables that can be used to support a DAW but none of them were really designed specifically for this purpose and the ones that are available are not sturdy enough for the commercial studio environment. They set out to make something better.\u003c\/p\u003e\r\n\u003cp\u003eThe Sound Anchor DAW2X is heavy and balanced. It is super sturdy and will give many years of service even under very hard day in day out use. The keyboard platform and video mount are height adjustable independent of each other. We added this feature to accommodate different chair positions and engineers of different sizes. The DAW2X is an indispensable tool to the serious audio engineer.\u003c\/p\u003e\r\n\u003cp\u003eThe Sound Anchor DAW2X includes 2 Redmount video mounting systems. The DAW2X system has 2 arms that allow you to mount 2 VESA compliant monitors up to 27\". The 2X system is designed in a way that makes it possible to line up your monitors exactly where you want them. Both monitors can be panned or tilted. The Sound Anchor Redmount works with any monitor that has a 75mm, 100mm or 200mm x 100mm VESA mounting pattern.\u003c\/p\u003e\r\n\u003cp\u003eSound Anchor DAW2X stands are ideal for:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMusic control rooms\u003c\/li\u003e\r\n\u003cli\u003eDigital editing\u003c\/li\u003e\r\n\u003cli\u003eCD production\u003c\/li\u003e\r\n\u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e\r\n\u003cli\u003eFilm post-production\u003c\/li\u003e\r\n\u003cli\u003eVideo game production\u003c\/li\u003e\r\n\u003cli\u003eOnline audio production\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450640068711,"sku":"37811","price":913.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchor-daw-2x_37811_1_c6b256ac-4bbd-405a-9d03-751a06a0a076.jpg?v=1787093870"},{"product_id":"sound-anchors-admid2-46-single","title":"Sound Anchors ADMID2 46\" Monitor Stand for 20-29\" Wide Speakers - Single","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors ADMID2\u003c\/strong\u003e monitor stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003cp\u003eADMID2 stands are custom-made to accommodate monitors with a width between 20-29 inches. Contact us with your speaker's measurements and we'll work with Sound Anchors to get you the exact size you need.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450640134247,"sku":"72714","price":1023.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid-single-23_17031_1_148cf0f1-b358-46cd-8e79-b767529c7638.jpg?v=1787093871"},{"product_id":"sound-anchors-admid2-46-pair","title":"Sound Anchors ADMID2 46\" Monitor Stand for 20-29\" Wide Speakers - Pair","description":"\u003cp\u003eThe \u003cstrong\u003eSound Anchors ADMID2\u003c\/strong\u003e monitor stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer a very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e  \u003cp\u003eADMID2 stands are custom-made to accommodate monitors with a width between 20-29 inches. Contact us with your speaker's measurements and we'll work with Sound Anchors to get you the exact size you need.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eAPPLICATIONS:\u003c\/h3\u003e  \u003cul\u003e \u003cli\u003eMusic control rooms\u003c\/li\u003e \u003cli\u003eSurround sound monitoring\u003c\/li\u003e \u003cli\u003eCD mastering\u003c\/li\u003e \u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e \u003cli\u003eFilm post production\u003c\/li\u003e \u003cli\u003eVideo game production\u003c\/li\u003e \u003cli\u003eOnline audio production\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450640167015,"sku":"31212","price":1955.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid-pair-23_17030_1_6facf307-7099-4eef-bfb7-0c142a557743.jpg?v=1787093871"},{"product_id":"sound-anchors-admid-2-46-adjustable-monitor-stand-pair-demo-deal","title":"Sound Anchors ADMID 2 46\" Adjustable Monitor Stand - Pair (Demo Deal)","description":"\u003cp\u003e\u003cstrong\u003eSound Anchor ADMID Stands\u003c\/strong\u003e make proper placement of main and midfield monitors possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. In the past large monitors were mounted in or on the wall behind the console. This works sometimes but it is expensive, somewhat unpredictable and hard to change once installed. They also do not isolate your monitors from the structure or each other. Along with all of these drawbacks these mounting solutions seldom position your monitors exactly where they need to be for best sound.\u003c\/p\u003e\r\n\u003cp\u003eThe Sound Anchor ADMID stands are designed to allow the engineer to correctly place a pair of large monitors for best sound. These stands allow height and tilt adjustment of the monitors. ADMID stands offer very solid and stable support for your speakers. The speaker is supported on two 1\/2\" x 2\" flat steel bars. Sound Anchor ADMID stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.\u003c\/p\u003e\r\n\u003cp\u003eSound Anchor ADMID stands are ideal for:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMusic control rooms\u003c\/li\u003e\r\n\u003cli\u003eSurround sound monitoring\u003c\/li\u003e\r\n\u003cli\u003eCD mastering\u003c\/li\u003e\r\n\u003cli\u003eRadio and television broadcasting studios\u003c\/li\u003e\r\n\u003cli\u003eFilm post-production\u003c\/li\u003e\r\n\u003cli\u003eVideo game production\u003c\/li\u003e\r\n\u003cli\u003eOnline audio production\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e \u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Sound Anchors","offers":[{"title":"Default Title","offer_id":44450640658535,"sku":"147330","price":1739.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/sound-anchors-admid-2-46_31212_1_1_96f2789a-1da4-4d9e-a97b-ba4875916586.jpg?v=1787093872"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/sound-anchors.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}