{"title":"Power Conditioners","description":null,"products":[{"product_id":"furman-m-8x2","title":"Furman M-8x2","description":"\u003cp\u003eA Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system.  Install a \u003cspan style=\"font-weight: bold;\"\u003eFurman M-8x \u003c\/span\u003ein to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.  The M-8x is designed for applications where lights are not required.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstrument Rigs\u003c\/span\u003e\u003cbr\u003eYou've got a rack for your effects, preamps, tuner...you're going to plug that into the wall?  One big spike and your rig is up in smoke.  Furman's standard level surge\/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots.  With Furman's standard level RFI\/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eRecording\u003c\/span\u003e\u003cbr\u003eCan't track down where that noise is coming from?  Your mix sounding flat?  With Furman's standard level RFI\/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW.  Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges.  With a 15A capacity and nine total outlets, it's enough to power your whole home studio.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDJ Equipment\u003c\/span\u003e\u003cbr\u003eBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig.  Furman's standard level protection and filtration keeps the bad stuff out.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003ePro Audio\u003c\/span\u003e\u003cbr\u003eWhen you're out there gigging, you never know what kind of power you're going to get.  The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI\/EMI filtration.  It keeps your equipment safe and sounding clean.  Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449272528999,"sku":"5708","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_m8x2_1.jpg?v=1787088389"},{"product_id":"furman-p-8-pro-c","title":"Furman P-8 PRO C","description":"\u003cp class=\"p1\"\u003eThe \u003cstrong\u003eFurman P-8 PRO C\u003c\/strong\u003e features Furman’s venerable Series Multi-Stage Protection (SMP) circuit as well as our exclusive Linear Filtering Technology (LiFT). Together, these technologies comprise what is, without question, the worlds most advanced and comprehensive transient voltage surge suppressor\/conditioner.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eSMP+ (Series Multi-stage Protection Plus)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eFurman’s SMP+ surge suppression virtually eliminates service calls.  Traditional surge suppression circuits “sacrifice” themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor.  With Furman’s SMP+, however, damaging transient voltages are safely absorbed, clamped and dissipated.  No sacrificed parts, no service calls, no down time.\u003cbr\u003e\u003cbr\u003eUnique to Furman’s SMP+ is its unparalleled clamping voltage.  While other designs offer clamping voltages that are well above 300Vpk, Furman’s SMP+ clamps at 188Vpk, 133 VAC RMS even when tested with multiple 6000Vpk - 3000 amp surges!  This unprecedented level of protection is only available with Furman’s SMP+ technology.  Additionally, Furman’s trusted over-voltage circuitry protects against all too frequent open neutral wiring, or accidental connections to 208 or 240 VAC. Furman’s SMP+ with over voltage protection immediately shuts off the incoming power until the over voltage condition is corrected.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eLiFT (Linear Filtering Technology)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, traditional AC conditioners have been designed for unrealistic laboratory conditions.  Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs.  Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line!  Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground.  Furman’s SMP+ with LiFT takes another approach, ensuring optimal performance through linear fi ltering and no leakage to ground.\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eEVS (Extreme Voltage Shutdown)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e \u003c\/strong\u003eTransient spikes and ground contamination are not the only problems faced by today’s sensitive electronics. There are also sustained over voltage conditions, sometimes called extreme voltages. Many surge suppression devices will not be able to protect equipment from sustained over voltages. These conditions can occur for multiple reasons: a power pole may be damaged during a storm or accident; or, in many countries, such as USA and Canada, lost or intermittent neutral wiring of a multiple-zone system can result in a sudden connection well in excess of 208 volts AC. Many surge suppression devices are not equipped to handle these kinds of conditions. Without proper protection, the end result is destroyed equipment or, at best, a destroyed surge suppression system.\u003c\/p\u003e\n\u003cp class=\"p1\" style=\"padding-left: 30px;\"\u003eFurman’s EVS constantly monitors incoming voltage, and once any overvoltage condition over 137 volts AC is detected, a relay opens which immediately shuts down the unit and all connected equipment. An indicator light informs the user there is a problem, and once the condition has been corrected, the unit may be reset and will operate normally.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent rating: 20 Amps\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 90 to 140 VAC\u003c\/li\u003e\n\u003cli\u003eFrequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eOver Voltage Shutdown: 140 VAC typically\u003c\/li\u003e\n\u003cli\u003eSpike Protection Modes: Line to neutral, zero ground leakage\u003c\/li\u003e\n\u003cli\u003eSpike Clamping Voltage: 188 Vpk @ 3,000 Amps, (133 VAC RMS)\u003c\/li\u003e\n\u003cli\u003eMaximum surge current: 6,500 Amps\u003c\/li\u003e\n\u003cli\u003eNoise attenuation (transverse mode):\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e10 dB @ 10 kHz\u003c\/li\u003e\n\u003cli\u003e40 dB @ 100 kHz\u003c\/li\u003e\n\u003cli\u003e100 dB @ 10 MHz\u003c\/li\u003e\n\u003cli\u003eLinear attenuation curve from 0.05 - 100 ohms line impedance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanical Dimensions: 19” L x 10.5” D x 1.75” H\u003c\/li\u003e\n\u003cli\u003eWeight: 11 lbs (5 kg)\u003c\/li\u003e\n\u003cli\u003eConstruction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 0°C (32°F) to 40°C (104°F)\u003c\/li\u003e\n\u003cli\u003eOperating humidity range: \u0026lt; 90% RH\u003c\/li\u003e\n\u003cli\u003ePower Consumption:12 watts\u003c\/li\u003e\n\u003cli\u003eSafety Agency Listings:CSA UL1449\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449272496231,"sku":"38580","price":544.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_p8proc_front_1.jpg?v=1787088389"},{"product_id":"furman-m-8lx","title":"Furman M-8Lx","description":"\u003cp\u003eA Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system.  Install a \u003cspan style=\"font-weight: bold;\"\u003eFurman M-8Lx\u003c\/span\u003e into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.  The M-8Lx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eInstrument Rigs\u003c\/span\u003e\u003cbr\u003e You've got a rack for your effects, preamps, tuner...you're going to plug that into the wall?  One big spike and your rig is up in smoke.  Furman's standard level surge\/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots.  With Furman's standard level RFI\/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eRecording\u003c\/span\u003e\u003cbr\u003e Can't track down where that noise is coming from?  Your mix sounding flat?  With Furman's standard level RFI\/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW.  Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges.  With a 15A capacity and nine total outlets, it's enough to power your whole home studio.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eDJ Equipment\u003c\/span\u003e\u003cbr\u003e Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig.  Furman's standard level protection and filtration keeps the bad stuff out.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003ePro Audio\u003c\/span\u003e\u003cbr\u003e When you're out there gigging, you never know what kind of power you're going to get.  The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI\/EMI filtration.  It keeps your equipment safe and sounding clean.  Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449272561767,"sku":"5709","price":169.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_m8lx_1.jpg?v=1787088389"},{"product_id":"furman-m-8dx","title":"Furman M-8Dx","description":"\u003cp\u003eA Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system.  Install a \u003cspan style=\"font-weight: bold;\"\u003eFurman M-8Dx\u003c\/span\u003e into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.  The M-8Dx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places.  A dimmer knob lets you adjust the lamp brightness to just the right level.  The M-8Dx also features a bright red, three-digit LED voltmeter that displays incoming voltage.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstrument Rigs\u003c\/span\u003e\u003cbr\u003eYou've got a rack for your effects, preamps, tuner...you're going to plug that into the wall?  One big spike and your rig is up in smoke.  Furman's standard level surge\/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots.  With Furman's standard level RFI\/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eRecording\u003c\/span\u003e\u003cbr\u003eCan't track down where that noise is coming from?  Your mix sounding flat?  With Furman's standard level RFI\/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW.  Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges.  With a 15A capacity and nine total outlets, it's enough to power your whole home studio.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDJ Equipment\u003c\/span\u003e\u003cbr\u003eBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig.  Furman's standard level protection and filtration keeps the bad stuff out.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003ePro Audio\u003c\/span\u003e\u003cbr\u003eWhen you're out there gigging, you never know what kind of power you're going to get.  The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI\/EMI filtration.  It keeps your equipment safe and sounding clean.  Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449272594535,"sku":"5710","price":227.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_m8dx_1_11ceff38-2944-40b9-86a5-e318ff3447a4.jpg?v=1787088389"},{"product_id":"furman-ar-1215","title":"Furman AR-1215","description":"\u003cp\u003eThe 15 amp \u003cstrong\u003eAR-1215 AC Line Voltage Regulator\u003c\/strong\u003e is intended to protect audio, video, computer and other electronic equipment from problems caused by AC line voltage irregularities-sags, brownouts, or overvoltages that can cause sensitive digital equipment to malfunction, or, in extreme cases, to sustain damage.\u003c\/p\u003e\n\u003cp\u003eThe AR-1215 is designed to provide a steady, stable 120 VAC output. It accepts any input voltage from 97V to 141V and transforms it to a constant 120V, ±5V.  Voltages beyond that range may also be converted to usable levels, depending on how far out of range they are.  The AR-1215 can handle loads totaling up to 15 amps as long as the input voltage is above 124 volts.  For voltages below that level, its capacity must be derated at approximately .15 ampere per volt.\u003c\/p\u003e\n\u003cp\u003eThe AR-1215 has been designed specifically with the unique needs of audio and video in mind. Its technology differs from that of computer-oriented voltage regulators in many important ways.  For example:\u003c\/p\u003e\n\u003cp\u003eThe AR-1215 does not use a ferro-resonant transformer, which would be heavy and bulky, radiate a large magnetic field, and be too frequency-sensitive to be usable with generators.  Instead, it uses a use a design based on an eight-tap toroidal autoformer.  The toroidal design assures minimal leakage of stray magnetic fields.\u003c\/p\u003e\n\u003cp\u003eThe AR-1215 circuitry monitors the incoming line voltage with each cycle, comparing it to an extremely precise voltage reference, accurate to ±0.15%.  If a voltage fluctuation requires that a different tap be selected, the new tap is electronically switched exactly at the zero-crossing, to avoid distorting the AC waveform.  (Most commercial voltage regulators using multiple-tapped transformers switch taps at uncontrolled times, thereby creating voltage spikes, and often creating clicks that can leak into the audio).  Hysteresis of 1.5V in the switching circuits avoids \"chatter.\"  The design is not sensitive to small errors in line frequency, making them ideal for use with generators.\u003c\/p\u003e\n\u003cp\u003eThe AR-1215 also features power conditioning that is truly in a class by itself, thanks to the quantity, quality and configuration of the overvoltage suppression devices used.  These include MOV's, high voltage inductors and capacitors, and precise high-inrush magnetic circuit breakers.  This unique combination can safely divert large spikes as well as filter audible high frequency noise.\u003c\/p\u003e\n\u003cp\u003eAn additional feature, Extreme Voltage Shutdown, senses dangerously high or low voltages and shuts down the output before any damage is done.  The output remains off until the overvoltage or undervoltage is removed, with an LED indicating the shutdown condition.  This invaluable feature provides positive protection to your equipment from accidental connection to incorrect line voltages (for example, 220V when 120V is expected-- a not uncommon hazard in the entertainment industries.)\u003c\/p\u003e\n\u003cp\u003eThe AR-1215 has eight outlets on the rear panel, and one on the front panel. All outlets are regulated, spike-suppressed, and filtered against RFI with a three-pole filter.  There are no controls except the circuit breaker\/on-off switch.  A bar-graph meter comprised of 10 LED's indicates input voltage, while another LED indicates \"In Regulation\" status (i.e., that the output voltage is within ±5V of 120V).  The unit is housed in a compact, single-space rack-mount chassis, 1.75\" high and 8\" deep (8.9 x 43.2 cm) and weighs only 12 lbs. (5 kg).\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449272627303,"sku":"5716","price":549.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_ar1215_1.jpg?v=1787088389"},{"product_id":"furman-ac-215a","title":"Furman AC-215A","description":"\u003cp\u003eFor over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals.  Furman’s Series Multi-Stage Protection Plus (SMP+) featuring Linear Filtering Technology, Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV delivers the purest AC power and the most comprehensive protection available – going far beyond what is found in traditional surge strips.  With \u003cstrong\u003eFurman’s AC-215\u003c\/strong\u003e, everyone can reap the benefits of unrivaled power purification and unequalled surge protection.\u003c\/p\u003e\n\u003cp\u003eToday’s overworked, outdated power grid delivers poor quality AC power.  When connecting sensitive equipment to regular power outlets, AC noise masks and distorts critical signal information which cripples performance.  This is why it’s more important than ever to purify or clean the AC powering your sensitive audio\/video equipment\u003c\/p\u003e\n\u003cp\u003eFurman’s SMP+ circuit incorporates Linear Filtering Technology (LiFT) to insure that flat screen televisions, projectors, processors, or any sensitive audio\/video components are fed linearly-filtered AC power.  This dramatically reduces noise, ensuring consistent, peak performance from your equipment.\u003c\/p\u003e\n\u003cp\u003eTypical AC filters feature antiquated non-linear circuits.  Though these multiple stage filters or power cleaners reduce some noise, they do so unevenly. In fact, they can add noise to your power line due to their filter’s excessive resonant peaking.  With Furman’s proprietary Linear Filtering Technology (LiFT), AC noise is suppressed evenly, assuring maximum performance from your system.\u003c\/p\u003e\n\u003cp\u003eAdditionally, today’s power grid commonly experiences numerous electrical surges and spikes on a daily basis.  At best, these irregularities can degrade your equipment’s performance, and, at worst, can severely damage your entire system.  Furman’s SMP+ circuit offers the highest degree of protection available without sacrificing itself or any of its components.\u003c\/p\u003e\n\u003cp\u003eAnother feature that is unique to Furman’s SMP+ circuit is automatic extreme-voltage shutdown.  Extreme voltages are statistically the most common, damaging AC event.  The extreme-voltage shutdown circuit automatically turns off the AC-215 when it is fed 137 volts or higher, protecting itself and connected equipment from the extreme voltage.  Only Furman offers this degree of protection!\u003c\/p\u003e\n\u003cp\u003eConventional AC conditioners employing older technologies leak voltage to circuit ground which can, in fact, aid in damaging sensitive digital circuits such as computer processors.  Furman’s new technology, however, never directs voltage to the circuit ground further ensuring the safety of your equipment.\u003c\/p\u003e\n\u003cp\u003eThis compact unit includes hardware for easy installation.  It’s ideal for mounting directly onto the back of a plasma or LCD screen, but works in any application where discretely-located, remote power purification and protection are needed.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449272856679,"sku":"5742","price":221.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_ac215a_1.jpg?v=1787088390"},{"product_id":"equitech-son-of-q-jr-power-conditioner-black","title":"Equitech Son of Q Jr. Power Conditioner - Black","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Son of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003cdl\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e \n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449302118503,"sku":"25866","price":1650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q_2.jpg?v=1787088469"},{"product_id":"equitech-son-of-q-power-conditioner-black","title":"Equitech Son of Q Power Conditioner - Black","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e Son of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003cdl\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e \n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449302151271,"sku":"25872","price":1597.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q_1.jpg?v=1787088469"},{"product_id":"equitech-son-of-q-sr-power-conditioner-black","title":"Equitech Son of Q Sr. Power Conditioner - Black","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Son of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003cdl\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e \n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449302184039,"sku":"25875","price":1911.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q.jpg?v=1787088469"},{"product_id":"furman-pl-plus-c","title":"Furman PL-PLUS C","description":"\u003cp\u003eThe most widely recognized and trusted name in AC power conditioning, is proud to introduce the PL-8 II, PL-Plus II, PL-Plus D II, PM-8 II Power conditioners, featuring Furman’s revolutionary SMP+ technology.   Furman’s Series Multi-Stage Protection Plus (SMP+) circuit also features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV.  Together; these technologies comprise, what is without question, the worlds most advanced and comprehensive transient voltage surge suppressor.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eSMP+ (Series Multi-Stage Protection Plus)\u003c\/strong\u003e\u003cbr\u003e Furman’s SMP+ surge suppression virtually eliminates service calls.  Traditional surge suppression circuits “sacrifice” themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor.  Not so with SMP+.  With Furman’s SMP+, damaging transient voltages are safely absorbed, clamped and dissipated.  No sacrificed parts, no service calls, no down time. \u003c\/p\u003e\r\n\u003cp\u003eUnique to Furman’s SMP+ is its unparalleled clamping voltage (even when tested beyond the grueling specifications of - USA\/CIDA’s A-1-1 test).  While other designs offer clamping voltages that are well above 300VAC peak, (far beyond long accepted professional standards), Furman’s SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP+ technology.  Additionally, Furman’s trusted over-voltage circuitry protects against all too frequent accidental connections to 208 or 240VAC, by shutting off the incoming power until the over voltage condition is corrected.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449308409959,"sku":"11022","price":386.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl-plusc.jpg?v=1787088495"},{"product_id":"furman-pl-pro-c","title":"Furman PL-PRO C","description":"\u003cp\u003eThe Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design.  The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS).  Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFurman PL-PRO C Applications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstrument Rigs - \u003c\/span\u003eYou've got a rack for your effects, preamps, tuner...You're going to plug that into the wall?  One big spike and your rig is up in smoke.  Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots.  With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eRecording - \u003c\/span\u003eCan't track down where that noise is coming from?  Your mix sounding flat?  With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW.  Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges.  With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eDJ Equipment - \u003c\/span\u003eBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003ePro Audio - \u003c\/span\u003eWhen you're out there gigging, you never know what kind of power you're going to get.  The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology.  It keeps your equipment safe and sounding clean.  Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eSurge Protection - \u003c\/span\u003eFurman's exclusive SMP technology provides the highest level of surge \u0026amp; spike protection available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eNoise Filtration - \u003c\/span\u003eLiFT offers AC power filtering to ensure clean power for unequaled audio \u0026amp; video clarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eVoltage Protection - \u003c\/span\u003eAdvanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003ePull-out Lights - \u003c\/span\u003eDual smooth track retractable LED lights illuminate equipment in your rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eDiagnostic Lights - \u003c\/span\u003eLED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eUSB Charger - \u003c\/span\u003eFront panel convenience charger allows you to charge most media devices or power a USB lamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eLED Voltmeter - \u003c\/span\u003eSegmented LED voltmeter monitors and displays incoming line voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eIsolated Banks - \u003c\/span\u003eIsolated outlet banks minimize inter-component interference and noise contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eWall Wart Spacing - \u003c\/span\u003eThree widely spaced outlets accommodate bulky AC power transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e20 Amp Rating - \u003c\/span\u003e20 Amp rating featuring a high inrush magnetic circuit breaker for added protection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449308573799,"sku":"11076","price":654.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl_pro_c_1.jpg?v=1787088497"},{"product_id":"furman-pl-pro-dmc","title":"Furman PL-PRO DMC","description":"\u003cp\u003eThe Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design.  The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS).  Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSurge Protection\u003c\/span\u003e\u003cbr\u003e Furman's exclusive SMP technology provides the highest level of surge \u0026amp; spike protection available.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eNoise Filtration\u003c\/span\u003e\u003cbr\u003e LiFT offers AC power filtering to ensure clean power for unequaled audio \u0026amp; video clarity.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003eVoltage Protection\u003c\/span\u003e\u003cbr\u003e Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003ePull-out Lights\u003c\/span\u003e\u003cbr\u003e Dual smooth track retractable LED lights illuminate equipment in your rack.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eDiagnostic Lights\u003c\/span\u003e\u003cbr\u003e LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003eUSB Charger\u003c\/span\u003e\u003cbr\u003e Front panel convenience charger allows you to charge most media devices or power a USB lamp.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eVoltmeter \/ Ammeter\u003c\/span\u003e\u003cbr\u003e Large digital voltmeter \/ ammeter, with discrete dimmer button, displays line votlage and true RMS current draw.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eIsolated Banks\u003c\/span\u003e\u003cbr\u003e Isolated outlet banks minimize inter-component interference and noise contamination.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eWall Wart Spacing\u003c\/span\u003e\u003cbr\u003e Three widely spaced outlets accommodate bulky AC power transformers.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003e20 AMP Rating\u003c\/span\u003e\u003cbr\u003e 20 Amp rating featuring a high inrush magnetic circuit breaker for added protection.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eNine Total Outlets\u003c\/span\u003e\u003cbr\u003e Nine total outlets (eight rear panel outlets and one front panel convenience outlet).\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eBNC Lamp Connector\u003c\/span\u003e\u003cbr\u003e Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum output current: 20 amps\u003c\/li\u003e\n\u003cli\u003eLine cord: captive 3\/12 AWG, 10 ft. black cord with NEMA 20 plug\u003c\/li\u003e\n\u003cli\u003ePull-out lights: two multi-LED, dimmable lamps\u003c\/li\u003e\n\u003cli\u003eBNC socket w\/ switch: rear rack lamp, 12VAC 500MA maxx (lamp not included)\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 90 to 139 VAC\u003c\/li\u003e\n\u003cli\u003eSpike protection mode: Line to neutral, zero ground leakage\u003c\/li\u003e\n\u003cli\u003eSpike clamping voltage: 188 VAC peak @ 3,000 Amps\u003c\/li\u003e\n\u003cli\u003eResponse time: 1 nanosecond\u003c\/li\u003e\n\u003cli\u003eMaximum surge current: 6,500 Amps\u003c\/li\u003e\n\u003cli\u003eNoise attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 19” W x 10.5” D x 1.75” H\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lbs.\u003c\/li\u003e\n\u003cli\u003ePower consumption: 12 watts\u003c\/li\u003e\n\u003cli\u003eSafety listing: cTUVus\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449328070759,"sku":"13249","price":764.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl_pro_dmc_1.jpg?v=1787088571"},{"product_id":"monster-power-pro-2500","title":"Monster Power Pro 2500","description":"The \u003cb\u003eMonster PRO 2500\u003c\/b\u003e Professional Rack Mountable PowerCenter™ featuring Patented Monster® Clean Power™ Stage 2 with Three Separate Isolation Filter Sections and Dual Mode Plus™ Surge Protection for Musicians, Portable Racks, and Small Studio Applications \u003cbr\u003e\u003cbr\u003e PRO 2500 PowerCenter™ for Musicians and Sound Professionals Who Want AC Line Protection and Enhanced Performance As fellow musicians, we designed the PRO 2500 PowerCenter to help achieve the best possible sound at an affordable price. Patented Clean Power filtering technology helps improve sonic performance, while Dual Mode Plus protection keeps your music and sound equipment safe from power line surges and spikes. The PRO 2500 has specially designed features for the sound professional, including a front panel XLR lamp connection for easy operation, rack handles for easy moving, and LED voltmeter. Installs easily in any 19-inch EIA-standard rack mount. Plus, we use a heavy-duty PowerLine 200 power cable with extra-long 8-foot length to make setup even easier. \u003cbr\u003e\u003cbr\u003e Without Clean Power, Your Audio System Can’t Deliver Peak Performance Many so-called “power conditioners” only protect against random power surges and\/or voltage spikes. But, in fact, AC power line noise and noise generated by other components are equally harmful and constant threats to performance. These disturbances can cause inferior sound quality marred with lower bandwidth and reduced signal-to-noise ratio. Additionally, many power conditioners’ outlets often can’t handle the peak transient current capacity that high power amplifiers demand. As a result, dynamic distortion and loss of peak power can occur, preventing your amplifiers from ever maximizing their performance. \u003cbr\u003e\u003cbr\u003e Clean Power Stage 2PRO 2500 is Much More Than a Surge Protector While the PowerCenter also does an excellent job of protecting your equipment from harmful power surges, its main performance benefit is much more than just surge protection. Our patented Clean Power™ filter circuitry (U.S. Pat. No. 6,473,510 B1) virtually stops noise that goes right through ordinary surge protectors. Clean Power Stage 2 does more than just filter out electromagnetic (EMI) and radio frequency (RF) interference. It also isolates different types of audio equipment from each other. \u003cbr\u003e\u003cbr\u003e The PowerCenter goes beyond typical filtration of RF\/EM interference on the AC power line. The PowerCenter features isolated Clean Power digital and analog audio filters for ever more effective reduction of “dirty power” between connected components. If any noise from components sharing the power line gets through one Clean Power filter, it will have to go through another filter to get to an adjacent set of outlets. The result is an extremely low noise floor without hum or buzz that allows all of the rich harmonics and tone to come through your performance. \u003cbr\u003e\u003cbr\u003e Additional filters for high current audio outlets, specially designed for power amplifiers, will deliver the instantaneous peak currents needed to avoid distortion and keep drums and other quick-attack percussion instruments sounding crisp, even at loud listening levels. The degree of isolation and filtering is reflected in the Monster Power Stage number, with higher numbers indicating the most advanced filtering circuitry--but even at the more basic levels, the improvement in sound can be striking. \u003cbr\u003e\u003cbr\u003e Dual Mode ProtectionTwo-Stage Sequenced Switching and 2775-Joule Surge Protection Provide Safety for Your Expensive Gear The PRO 2500 features two-stage turn-on sequencing to protect your components from damage that may occur if they're all powered on at the same moment. The unit also provides excellent surge\/spike protection for your components with Monster exclusive Dual Mode Plus circuitry and a surge\/spike absorption capacity of 2775 Joules. There are 8 surge-protected rear panel AC outlets and 2 front panel convenience outlets. A digital microprocessor-driven voltmeter provides instantaneous monitoring of power conditions and fluctuations. An audible alarm alerts you when a surge has occurred. Get PRO 2500 to protect your valuable sound equipment and enable all your AC-powered audio components to work at optimal performance levels, for the best possible sound your system can deliver.","brand":"Monster","offers":[{"title":"Default Title","offer_id":44449329643623,"sku":"13507","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/monster_power_pro_2500_1.jpg?v=1787088577"},{"product_id":"furman-pl-8c","title":"Furman PL-8C","description":"\u003cp\u003eThe Furman's Classic Series which includes the the \u003cstrong\u003eFurman PL-8C\u003c\/strong\u003e brings together superior protection and outstanding performance in a sturdy, rack-mountable design.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eApplications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eInstrument Rigs: You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003c\/li\u003e\r\n\u003cli\u003eRecording: Can't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.\u003c\/li\u003e\r\n\u003cli\u003eDJ Equipment: Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.\u003c\/li\u003e\r\n\u003cli\u003ePro Audio: When you're out there gigging, you'll never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it's toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449331478631,"sku":"13831","price":327.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman-pl-8c_13831_1.jpg?v=1787088585"},{"product_id":"alesis-powertrip-8","title":"Alesis PowerTrip 8","description":"\u003cp\u003eInstall the \u003cstrong\u003eAlesis PowerTrip8\u003c\/strong\u003e in the top of your rack and use the eight switched AC outlets on the rear panel to power all of your equipment, up to a full 15-amp load.  The line voltage monitor displays incoming voltage, and the two slide-out, swiveling light fixtures provide illumination of your gear, adjustable via the front-panel dimmer control.\u003cbr\u003e \u003cbr\u003e The PowerTrip8 supports eight grounded AC jacks on its rear panel, activated via a large lit power switch on the front panel.  The PowerTrip8 offers superb surge and transient suppression, so all power outputs are clean and noise-free.\u003cbr\u003e \u003cbr\u003e The unit features a large front-panel LED display that shows current AC line voltage for informed power management.  In addition, on the front panel, the PowerTrip8 contains two pull-out light bars that have their own separate on\/off switch and dimmer-control knob.\u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Alesis","offers":[{"title":"Default Title","offer_id":44449338851431,"sku":"15022","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alesis_powertrip.jpg?v=1787088615"},{"product_id":"furman-d10-pfp","title":"Furman D10-PFP","description":"\u003cp\u003eThe \u003cspan style=\"font-weight: bold;\"\u003eFurman D10-PFP\u003c\/span\u003e is a sturdy, rack-mountable power distributor.  Featuring 10 rear panel outlets with circuit breaker, it offers a convenient way to power a rack full of equipment up to a 15 amp load.\u003cbr\u003e \u003cbr\u003e The sturdy, all steel construction and heavy-duty 6' (14 AWG) three conductor cord provide ultimate durability and longevity.\u003cbr\u003e \u003cbr\u003e Note that the D10-PFP is a power distributor only, and offers no surge protection or conditioning functions, making it an ideal extension to an existing branch circuit. \u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 rear panel outlets for your equipment\u003c\/li\u003e\n\u003cli\u003eSturdy one rack space design\u003c\/li\u003e\n\u003cli\u003eHeavy duty 6', 14 AWG Cord\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protected\u003c\/li\u003e\n\u003cli\u003eRated 15 amps\u003c\/li\u003e\n\u003cli\u003eAll steel construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449341997159,"sku":"15886","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_d10pfp_1.jpg?v=1787088627"},{"product_id":"furman-pl-pro-c-demo-deal","title":"Furman PL-PRO C (Demo Deal)","description":"The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFurman PL-PRO C Applications\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstrument Rigs\u003c\/span\u003e\u003cbr\u003eYou've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eRecording\u003c\/span\u003e\u003cbr\u003eCan't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDJ Equipment\u003c\/span\u003e\u003cbr\u003eBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003ePro Audio\u003c\/span\u003e\u003cbr\u003eWhen you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFurman PL-PRO C Features\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSurge Protection\u003c\/span\u003e\u003cbr\u003eFurman's exclusive SMP technology provides the highest level of surge \u0026amp; spike protection available.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eNoise Filtration\u003c\/span\u003e\u003cbr\u003eLiFT offers AC power filtering to ensure clean power for unequaled audio \u0026amp; video clarity.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eVoltage Protection\u003c\/span\u003e\u003cbr\u003eAdvanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003ePull-out Lights\u003c\/span\u003e\u003cbr\u003eDual smooth track retractable LED lights illuminate equipment in your rack.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDiagnostic Lights\u003c\/span\u003e\u003cbr\u003eLED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eUSB Charger\u003c\/span\u003e\u003cbr\u003eFront panel convenience charger allows you to charge most media devices or power a USB lamp.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eLED Voltmeter\u003c\/span\u003e\u003cbr\u003eSegmented LED voltmeter monitors and displays incoming line voltage.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eIsolated Banks\u003c\/span\u003e\u003cbr\u003eIsolated outlet banks minimize inter-component interference and noise contamination.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWall Wart Spacing\u003c\/span\u003e\u003cbr\u003eThree widely spaced outlets accommodate bulky AC power transformers.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003e20 Amp Rating\u003c\/span\u003e\u003cbr\u003e20 Amp rating featuring a high inrush magnetic circuit breaker for added protection.","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449362804839,"sku":"14556","price":279.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl_pro_c_1_1.jpg?v=1787088713"},{"product_id":"furman-pl-pro-dmc-demo-deal","title":"Furman PL-PRO DMC (Demo Deal)","description":"The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eSurge Protection\u003c\/span\u003e\u003cbr\u003e Furman's exclusive SMP technology provides the highest level of surge \u0026amp; spike protection available.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eNoise Filtration\u003c\/span\u003e\u003cbr\u003e LiFT offers AC power filtering to ensure clean power for unequaled audio \u0026amp; video clarity.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003eVoltage Protection\u003c\/span\u003e\u003cbr\u003e Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003ePull-out Lights\u003c\/span\u003e\u003cbr\u003e Dual smooth track retractable LED lights illuminate equipment in your rack.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eDiagnostic Lights\u003c\/span\u003e\u003cbr\u003e LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003eUSB Charger\u003c\/span\u003e\u003cbr\u003e Front panel convenience charger allows you to charge most media devices or power a USB lamp.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eVoltmeter \/ Ammeter\u003c\/span\u003e\u003cbr\u003e Large digital voltmeter \/ ammeter, with discrete dimmer button, displays line votlage and true RMS current draw.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eIsolated Banks\u003c\/span\u003e\u003cbr\u003e Isolated outlet banks minimize inter-component interference and noise contamination.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eWall Wart Spacing\u003c\/span\u003e\u003cbr\u003e Three widely spaced outlets accommodate bulky AC power transformers.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003e20 AMP Rating\u003c\/span\u003e\u003cbr\u003e 20 Amp rating featuring a high inrush magnetic circuit breaker for added protection.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eNine Total Outlets\u003c\/span\u003e\u003cbr\u003e Nine total outlets (8 rear panel outlets and one front panel convenience outlet).\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eBNC Lamp Connector\u003c\/span\u003e\u003cbr\u003e Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eFurman PL-PRO DMC Specifications\u003c\/span\u003e\u003cbr\u003e \u003cul\u003e\n\u003cli\u003eMaximum Output Current: 20 amps\u003c\/li\u003e\n\u003cli\u003eLine Cord: Captive 3\/12 AWG, 10 ft. black cord with NEMA 20 plug\u003c\/li\u003e\n\u003cli\u003ePull-out Lights: Two multi-LED, dimmable lamps\u003c\/li\u003e\n\u003cli\u003eBNC Socket w\/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 90 to 139 VAC\u003c\/li\u003e\n\u003cli\u003eSpike Protection Mode: Line to neutral, zero ground leakage\u003c\/li\u003e\n\u003cli\u003eSpike Clamping Voltage: 188 VAC peak @ 3,000 Amps\u003c\/li\u003e\n\u003cli\u003eResponse Time: 1 nanosecond\u003c\/li\u003e\n\u003cli\u003eMaximum Surge Current: 6,500 Amps\u003c\/li\u003e\n\u003cli\u003eNoise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions: 19” W x 10.5” D x 1.75” H\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lbs.\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 12 watts\u003c\/li\u003e\n\u003cli\u003eSafety Listing: cTUVus\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449362772071,"sku":"16604","price":669.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl_pro_dmc_1_1_e2ac235a-4319-4100-8f20-7f1329bc0b97.jpg?v=1787088713"},{"product_id":"furman-p-8-pro-ii-demo-deal","title":"Furman P-8 PRO II (Demo Deal)","description":"\u003cp\u003eThe most widely recognized and trusted name in AC power conditioning is proud to introduce the PL-PRO II, PL-PRO D II and PM-PRO II power conditioners, featuring Furman’s revolutionary SMP+ technology. Furman’s Series Multi-stage Protection (SMP+) circuit also features our exclusive Linear Filter Technology (LiFT) coupled with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together, these technologies comprise what is, without question, the world’s most advanced and comprehensive transient voltage surge suppressor.\u003c\/p\u003e\u003cbr\u003e \u003cp\u003e\u003cb\u003eSMP+ (Series Multi-stage Protection Plus)\u003c\/b\u003e\u003cbr\u003eFurman’s SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits “sacrifice” themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. With Furman’s SMP+, however, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no service calls, no down time.\u003cbr\u003e\u003cbr\u003eUnique to Furman’s SMP+ is its unparalleled clamping voltage. While other designs offer clamping voltages that are well above 300Vpk, Furman’s SMP+ clamps at 188Vpk, 133 VAC RMS even when tested with multiple 6000Vpk - 3000 amp surges! This unprecedented level of protection is only available with Furman’s SMP+ technology. Additionally, Furman’s trusted over-voltage circuitry protects against all too frequent open neutral wiring, or accidental connections to 208 or 240 VAC. Furman’s SMP+ with over voltage protection immediately shuts off the incoming power until the over voltage condition is corrected.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eLiFT (Linear Filtering Technology)\u003c\/b\u003e\u003cbr\u003eUnfortunately, traditional AC conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more\u003cbr\u003ethan 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman’s SMP+ with LiFT takes another approach, ensuring optimal performance through linear fi ltering and no leakage to ground.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cbr\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449362739303,"sku":"13879","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_p8pro2_1_1_1.jpg?v=1787088714"},{"product_id":"furman-pl-pro-dmc-e","title":"Furman PL-Pro DMC E","description":"\u003cp\u003eThe \u003cstrong\u003eFurman PL-PLUS DMC\u003c\/strong\u003e is the latest generation of Furman's legendary 15 amp power conditioners, featuring Furman's exclusive Series Multi-Stage Protection Plus (SMP+) with Linear Filtering Technology (LiFT) and Extreme Voltage Shutdown (EVS) for ultra-reliable protection of your gear. A front-panel voltmeter\/ammeter lets you keep an eye on your voltage levels and a diagnostic light lets you know your PL-PLUS DMC is functioning properly. Considering how affordable this level of protection is, you can't afford to not have a PL-PLUS DMC!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-stage protection.\u003c\/li\u003e\n\u003cli\u003eExtreme voltage shutdown.\u003c\/li\u003e\n\u003cli\u003eLinear filtering technology.\u003c\/li\u003e\n\u003cli\u003eLED rack lights and BNC jack for gooseneck lamp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSMP+ (Series Multi-Stage Protection Plus)\u003c\/strong\u003e\u003cbr\u003eThe Furman PL-PLUS DMC's SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits \"sacrifice\" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With the PL-PLUS DMC's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no service calls, no down time. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eExtreme Voltage Shutdown (EVS)\u003c\/strong\u003e\u003cbr\u003eUnique to the Furman PL-PLUS DMC's SMP+ is its unparalleled clamping voltage (even when tested beyond the grueling specifications of - USA\/CIDA's A-1-1 test). While other designs offer clamping voltages that are well above 300VAC peak, (far beyond long accepted professional standards), the Furman PL-PLUS DMC's SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman's SMP+ technology. Additionally, Furman's trusted over-voltage circuitry protects against all too frequent accidental connections to 208 or 240VAC, by shutting off the PL-PLUS DMC's incoming power until the over voltage condition is corrected.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLiFT (Linear Filtering Technology)\u003c\/strong\u003e\u003cbr\u003eUnfortunately, traditional AC filter - Conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to re-boot digital pre-sets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. The Furman PL-PLUS DMC's SMP+ with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLED Rack Lights\u003c\/strong\u003e\u003cbr\u003eThe Furman PL-PLUS DMC features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, the Furman PL- PLUS DMC includes a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449369981031,"sku":"12166","price":625.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl-prodmce.jpg?v=1787088743"},{"product_id":"furman-f1500-ups","title":"Furman F1500-UPS Uninterruptible Power Supply and Voltage Regulator","description":"\u003cp\u003eThe \u003cstrong\u003eFurman F1500-UPS\u003c\/strong\u003e battery backup is designed exclusively for audio\/video professionals and home theater aficionados. For decades, traditional audio\/video components were simple analog devices designed to easily weather power outages of well over two seconds. Later, as computer and microprocessor based components gained in popularity, their extraordinary sensitivity to even a fraction of a second’s power loss was managed with traditional UPS (uninterruptible power supply) technology.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUnfortunately, these units were solely designed for the I.T. professional. Though they included many technologies and features appropriate to that application, they fell short for premium audio\/video components. Though many of these manufacturers later recognized the ever-emerging professional audio\/video, broadcast, and home theater market, their lack of experience led merely to a re-tooled chassis. These hastily produced UPS devices lacked the technologies necessary to truly optimize protection, performance, and control for today’s audio video components.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Furman F1500-UPS more than fills this void, and offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003ePROTECTION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eTypical UPS systems feature antiquated surge suppression technologies that can cause as much damage and annoying lock-ups as they attempt to prevent. Only Furman offers battery back-up with our road-proven SMP non-sacrificial, zero ground contamination surge suppression technology and EVS Extreme Voltage Shutdown. After all, the most robust battery cannot function if the accompanying circuits are damaged. With Furman’s F1500-UPS, you can expect years of trouble free operation. \u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eFILTRATION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThough many control devices are relatively immune to moderate levels of AC line noise, today’s more sensitive devices (such as DLP projectors and line-level signal processors) certainly are not. High-definition technologies have pushed resolution to levels so extreme that virtually any AC noise capable of coupling with your system’s signal will distort, mask, or destroy the performance advantages we all strive so hard to capture and reproduce. Once again, the F1500-UPS is different. While other UPS devices feature AC line filters suitable for an IT closet, only Furman employs our exclusive Linear Filtering Technology (LiFT) to four discrete isolated outlet banks. This advanced noise filtering technology assures that today’s ultra-wide dynamic range is maintained as it must be – pristine. Remember, less AC noise equals greater content, greater resolution, and higher definition.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eTRUE SINE WAVE OUTPUT\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe F1500-UPS provides True Sine Wave output when in battery backup mode, ensuring the utmost reliability to all connected equipment while running on battery power.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003ePROGRAMMABILITY \u0026amp; CONTROL\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAudio\/video systems can vary greatly in their size and components, and as such, flexibility is needed in determining how a battery backup solution should function under different circumstances. Because of this, Furman has provided open source RS-232 control over four independent AC outlet banks, with a wide range of features to interface with an existing control unit. Dual programmable IR control allows the unit to send a shut down command to remote components in the event of a blackout – no more expensive projector bulbs to replace in the event of a blackout.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_4\"\u003eTYPICAL BACKUP COMPONENTS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eGiven the nature of battery backup technology, high-current audio and video components such as power amplifiers, powered subwoofers, and high-wattage displays are not recommended for use with the F1500-UPS. Not only will these components drain battery power quite rapidly, line impedance will be raised due to the F1500-UPS’s (or any) AVR and AC to DC inverter, which can induce current compression and noticeably diminish performance with high-current A\/V equipment. The following components are ideal for use with the F1500-UPS:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDAWs\u003c\/li\u003e\r\n\u003cli\u003eSatellite Receivers\u003c\/li\u003e\r\n\u003cli\u003eCable Boxes\u003c\/li\u003e\r\n\u003cli\u003eDigital Video Recorders\u003c\/li\u003e\r\n\u003cli\u003eMedia Servers\u003c\/li\u003e\r\n\u003cli\u003eExternal Hard Drives\u003c\/li\u003e\r\n\u003cli\u003eDigital Mixing Consoles\u003c\/li\u003e\r\n\u003cli\u003eLamp Based Video Displays\u003c\/li\u003e\r\n\u003cli\u003eControl Systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449382105191,"sku":"16138","price":2183.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_f1500-ups.jpg?v=1787088790"},{"product_id":"furman-f1000-ups","title":"Furman F1000-UPS 1000VA, 2RU Uninterruptible Power Supply","description":"\u003cp\u003eThe \u003cstrong\u003eFurman F1000-UPS\u003c\/strong\u003e is a battery backup designed exclusively for audio\/video professionals and home theater aficionados.\u003c\/p\u003e\r\n\u003cp\u003eFor decades, traditional audio\/video components were simple analog devices designed to easily weather power outages of well over two seconds.  Later, as computer and microprocessor-based components gained in popularity, their extraordinary sensitivity to even a fraction of a second’s power loss was managed with traditional UPS (uninterruptible power supply) technology.\u003c\/p\u003e\r\n\u003cp\u003eUnfortunately, these units were solely designed for the I.T.  professional.  Though they included many technologies and features appropriate to that application, they fell short for premium audio\/video components.  Though many of these manufactures later recognized the ever-emerging professional audio\/video, broadcast, and home theater market, their lack of experience led merely to a re-tooled chassis.   These hastily produced UPS devices lacked the technologies necessary to truly optimize protection, performance, and control for today’s audio\/video components.\u003c\/p\u003e\r\n\u003cp\u003eThe Furman F1000-UPS more than fills this void, and offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!\u003c\/p\u003e\r\n\u003cp\u003eThe following components are ideal for use with the F1000-UPS:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSatellite receivers\u003c\/li\u003e\r\n\u003cli\u003eCable boxes\u003c\/li\u003e\r\n\u003cli\u003eDigital video recorders\u003c\/li\u003e\r\n\u003cli\u003eMedia servers\u003c\/li\u003e\r\n\u003cli\u003eHigh-resolution game gaming consoles\u003c\/li\u003e\r\n\u003cli\u003eLamp based video display\u003c\/li\u003e\r\n\u003cli\u003eControl systems\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 id=\"toc_0\"\u003eProtection\u003c\/h3\u003e\r\n\u003cp\u003eTypical UPS systems feature antiquated surge suppression technologies that can cause as much damage and annoying lock-ups as they attempt to prevent.  Only Furman offers battery back-up with our road-proven SMP non-sacrificial, zero ground contamination surge suppression technology and EVS Extreme Voltage Shutdown.  After all, the most robust battery cannot function if the accompanying circuits are damaged.  With Furman’sF1000-UPS, you can expect years of trouble-free operation.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eFiltration\u003c\/h3\u003e\r\n\u003cp\u003eThough many control devices are relatively immune to moderate levels of AC line noise, today’s more sensitive devices (such as DLP projectors)certainly are not.  High-definition technologies have pushed resolution to levels so extreme that virtually any AC noise capable of coupling with your system’s signal will distort, mask, or destroy the performance advantages we all strive so hard to capture and reproduce.  Once again, the F1000-UPS is different.  While other UPS devices feature AC line filters suitable for a I.T.  closet, only Furman employs our exclusive Linear Filtering Technology (LiFT).  This advanced noise filtering technology assures that today’s ultra-wide dynamic range is maintained as it must be – pristine.  Remember, less AC noise equals greater content, greater resolution, and higher definition.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eProgrammability \u0026amp; Control\u003c\/h3\u003e\r\n\u003cp\u003eAudio\/video systems can vary greatly in their size and components, and as such, flexibility is needed in determining how a battery backup solution should function under different circumstances.  Because of this, Furman has provided open source RS-232 control over two independent AC outlet banks, with a wide range of control features to interface with an existing automation solution.  Dual programmable IR control allows the unit to send a shutdown command to remote components – no more expensive projector bulbs to replace in the event of a blackout.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_3\"\u003eTypical Backup Components\u003c\/h3\u003e\r\n\u003cp\u003eGiven the nature of battery backup technology, high-current audio and video components such as power amplifiers, powered subwoofers, and high-wattage displays are not recommended for use with the F1000-UPS. Not only will these components drain battery power quite rapidly, line impedance will be raised due to the F1000-UPS’s (or any) AVR and AC to DC inverter, which can induce current compression and noticeably diminish performance with high-current A\/V equipment.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449382137959,"sku":"17116","price":1069.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman-f1000-ups-21_17116_1_bea3cfbe-7540-44ba-bef7-b4e970c6ef88.jpg?v=1787088790"},{"product_id":"chandler-psu-1-for-tg-ltd-and-germanium-series-used","title":"Chandler PSU-1 for TG, LTD and Germanium Series (Used)","description":"Very clean used example of this psu. You can use up to 2x Chandler units per PSU-1.","brand":"Chandler Limited","offers":[{"title":"Default Title","offer_id":44449403699303,"sku":"8137","price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/chandler_psu-1_for_tg__ltd_and_germanium_series__used__4770589_d80ff355-297c-4d76-bfdd-44fce1b41b0b.jpg?v=1787088869"},{"product_id":"furman-pl-plus-ce","title":"Furman PL-PLUS CE","description":"The most widely recognized and trusted name in AC power conditioning, is proud to introduce the PL-8 II, PL-Plus II, PL-Plus D II, PM-8 II Power conditioners, featuring Furman’s revolutionary SMP+ technology. Furman’s Series Multi-Stage Protection Plus (SMP+) circuit also features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together; these technologies comprise, what is without question, the worlds most advanced and comprehensive transient voltage surge suppressor.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eSMP+ (Series Multi-Stage Protection Plus)\u003c\/b\u003e\u003cbr\u003eFurman’s SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits “sacrifice” themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With Furman’s SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no service calls, no down time. \u003cbr\u003e \u003cp\u003eUnique to Furman’s SMP+ is its unparalleled clamping voltage (even when tested beyond the grueling specifications of - USA\/CIDA’s A-1-1 test). While other designs offer clamping voltages that are well above 300VAC peak, (far beyond long accepted professional standards), Furman’s SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP+ technology. Additionally, Furman’s trusted over-voltage circuitry protects against all too frequent accidental connections to 208 or 240VAC, by shutting off the incoming power until the over voltage condition is corrected.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449418608743,"sku":"18189","price":449.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl-plusce_b3d2b252-ddaa-4ec2-a1b8-385482640d2c.jpg?v=1787088915"},{"product_id":"furman-pl-plus-dmc","title":"Furman PL-PLUS DMC 15A Power Conditioner with Voltmeter","description":"\u003cp\u003eThe \u003cstrong\u003eFurman PL-PLUS DMC\u003c\/strong\u003e is a power conditioner that features the Series Multi-Stage Protection (SMP) circuit and the exclusive Linear Filter Technology (LiFT) that make Furman power conditioner so reliable. The maintenance-free SMP surge protection safely absorbs, clamps, and dissipates the most extreme transient voltage spikes without destruction of the circuit. Furman LiFT ensures optimal performance through linear filtering with no leakage to ground, protecting the audio and video quality of your signal.\u003c\/p\u003e\r\n\u003cp\u003eClassic Series Furman power conditioner units have super-bright, long-life, retractable LED rack lights that produce virtually no heat and provide an extremely long life span. There is an on\/off\/dimmer control for the lights. A BNC back-panel connector will accommodate a gooseneck lamp for rear-rack illumination. A front-panel switch controls the gooseneck's operation. The Classic Series units occupy one rack-space each and have a convenient front-panel mounted outlet.\u003c\/p\u003e\r\n\u003cp\u003eThe PL-Plus has all these Furman Classic Series features, as well as a front-panel digital meter that displays incoming AC line voltage with laboratory accuracy (±1.5 VAC) as well as AC current draw regardless of load reactance, inductance, or resistance (±0.1 amp).\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449418903655,"sku":"16529","price":490.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman-pl-plus-dmc_16529_1_dafb066f-b0a6-4ff3-9406-6ac9cb449b9c.jpg?v=1787088916"},{"product_id":"furman-p-1800-ar","title":"Furman P-1800 AR","description":"\u003cp\u003eThe 15 Amp \u003cstrong\u003eFurman P-1800 AR\u003c\/strong\u003e delivers a stable 120 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe P-1800 AR accepts input voltages over a wide AC voltage range and transforms it to a constant output of 120V, ±5V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAdditionally, the P-1800 AR is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furman’s Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449419657319,"sku":"15252","price":1424.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman-p-1800-ar_15252_1_78a70873-0111-4b51-8abf-2d308efb0e98.jpg?v=1787088919"},{"product_id":"equitech-2rq-power-conditioner-used","title":"Equitech 2RQ Power Conditioner #6859 (Used)","description":"The award winning Equi=Tech rack mounted balanced AC power system, has garnered a reputation among professionals for ruggedness and dependability and of course as a highly effective means of reducing background noise. Typically audio and video hum is greatly reduced or eliminated completely, digital jitter is cut in half and there will be a significantly wider dynamic range. Eight sizes of rack mountable 120-volt balanced power systems are offered with an output capacity range of 1000 to 10,000 VA (8.3 - 83 Amps continuous duty.)\n\nAt the heart of each system is a highly efficient, precision wound toroid isolation transformer with a patented winding design that makes Equi=Tech systems the most accurately balanced systems in the world. Besides voltage, the impedance across the transformer's output is also precisely balanced which insures the broadest band noise cancellation possible -- the absolute state-of-the-art. Equi=Tech transformers are precision wound just for today's most sensitive digital electronics. Standard rack system transformers are equipped with Faraday shields for superior isolation and high common mode noise rejection. Also, a very low magnetic stray field design with additional magnetic shielding makes Equi=Tech rack systems safe for use near sensitive tape machines in racks.","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449474707559,"sku":"21328","price":1795.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_21328_1_4643466a-6ced-4a84-92a5-726fb30bd40d.jpg?v=1787089095"},{"product_id":"furman-p-1800-ar-1","title":"Furman P-1800 PF R","description":"\u003cp\u003eEngineered specifically for use with instrument amplifiers and other high-current equipment, the \u003cstrong\u003eFurman P-1800 PF R\u003c\/strong\u003e offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower Factor Technology\u003c\/strong\u003e\u003cbr\u003eYour amp needs a lot of power to sound its best. If you’re plugging into the wall, there’s a good chance your amp is not going to get the current it needs when pushed. Furman’s exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman’s Power Factor Technology keeps your instrument amplifier’s tone consistent and sounding it’s best.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClear Tone Technology\u003c\/strong\u003e\u003cbr\u003eClear Tone Technology works in unison with Power Factor Technology and Linear Filtering Technology to add an additional layer of AC noise filtration specifically engineered for instrument amplifiers. Clear Tone Technology provides tuned circuits that unveil instrument tone, harmonics, and clarity, resulting in a fuller sound and improved dynamic response.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449491386471,"sku":"11470","price":871.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_p-1800pfr_angle_6d90085b-d884-45a0-b104-0059efb4d645.jpg?v=1787089174"},{"product_id":"furman-f1500-ups-demo-deal","title":"Furman F1500-UPS Uninterruptible Power Supply and Voltage Regulator (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eFurman F1500-UPS\u003c\/strong\u003e battery backup is designed exclusively for audio\/video professionals and home theater aficionados. For decades, traditional audio\/video components were simple analog devices designed to easily weather power outages of well over two seconds. Later, as computer and microprocessor based components gained in popularity, their extraordinary sensitivity to even a fraction of a second’s power loss was managed with traditional UPS (uninterruptible power supply) technology.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUnfortunately, these units were solely designed for the I.T. professional. Though they included many technologies and features appropriate to that application, they fell short for premium audio\/video components. Though many of these manufacturers later recognized the ever-emerging professional audio\/video, broadcast, and home theater market, their lack of experience led merely to a re-tooled chassis. These hastily produced UPS devices lacked the technologies necessary to truly optimize protection, performance, and control for today’s audio video components.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Furman F1500-UPS more than fills this void, and offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003ePROTECTION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eTypical UPS systems feature antiquated surge suppression technologies that can cause as much damage and annoying lock-ups as they attempt to prevent. Only Furman offers battery back-up with our road-proven SMP non-sacrificial, zero ground contamination surge suppression technology and EVS Extreme Voltage Shutdown. After all, the most robust battery cannot function if the accompanying circuits are damaged. With Furman’s F1500-UPS, you can expect years of trouble free operation. \u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eFILTRATION\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThough many control devices are relatively immune to moderate levels of AC line noise, today’s more sensitive devices (such as DLP projectors and line-level signal processors) certainly are not. High-definition technologies have pushed resolution to levels so extreme that virtually any AC noise capable of coupling with your system’s signal will distort, mask, or destroy the performance advantages we all strive so hard to capture and reproduce. Once again, the F1500-UPS is different. While other UPS devices feature AC line filters suitable for an IT closet, only Furman employs our exclusive Linear Filtering Technology (LiFT) to four discrete isolated outlet banks. This advanced noise filtering technology assures that today’s ultra-wide dynamic range is maintained as it must be – pristine. Remember, less AC noise equals greater content, greater resolution, and higher definition.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eTRUE SINE WAVE OUTPUT\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe F1500-UPS provides True Sine Wave output when in battery backup mode, ensuring the utmost reliability to all connected equipment while running on battery power.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003ePROGRAMMABILITY \u0026amp; CONTROL\u003c\/h3\u003e\r\n\r\n\u003cp\u003eAudio\/video systems can vary greatly in their size and components, and as such, flexibility is needed in determining how a battery backup solution should function under different circumstances. Because of this, Furman has provided open source RS-232 control over four independent AC outlet banks, with a wide range of features to interface with an existing control unit. Dual programmable IR control allows the unit to send a shut down command to remote components in the event of a blackout – no more expensive projector bulbs to replace in the event of a blackout.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_4\"\u003eTYPICAL BACKUP COMPONENTS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eGiven the nature of battery backup technology, high-current audio and video components such as power amplifiers, powered subwoofers, and high-wattage displays are not recommended for use with the F1500-UPS. Not only will these components drain battery power quite rapidly, line impedance will be raised due to the F1500-UPS’s (or any) AVR and AC to DC inverter, which can induce current compression and noticeably diminish performance with high-current A\/V equipment. The following components are ideal for use with the F1500-UPS:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eDAWs\u003c\/li\u003e\r\n\u003cli\u003eSatellite Receivers\u003c\/li\u003e\r\n\u003cli\u003eCable Boxes\u003c\/li\u003e\r\n\u003cli\u003eDigital Video Recorders\u003c\/li\u003e\r\n\u003cli\u003eMedia Servers\u003c\/li\u003e\r\n\u003cli\u003eExternal Hard Drives\u003c\/li\u003e\r\n\u003cli\u003eDigital Mixing Consoles\u003c\/li\u003e\r\n\u003cli\u003eLamp Based Video Displays\u003c\/li\u003e\r\n\u003cli\u003eControl Systems\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449502330983,"sku":"30756","price":1749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_f1500-ups_1_16b9fd42-e7ee-4d98-80b6-96420b0c9214.jpg?v=1787089227"},{"product_id":"furman-pl-plus-c-demo-deal","title":"Furman PL-PLUS C (Demo Deal)","description":"\u003cp\u003eThe most widely recognized and trusted name in AC power conditioning, is proud to introduce the PL-8 II, PL-Plus II, PL-Plus D II, PM-8 II Power conditioners, featuring Furman’s revolutionary SMP+ technology.   Furman’s Series Multi-Stage Protection Plus (SMP+) circuit also features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV.  Together; these technologies comprise, what is without question, the worlds most advanced and comprehensive transient voltage surge suppressor.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eSMP+ (Series Multi-Stage Protection Plus)\u003c\/strong\u003e\u003cbr\u003e Furman’s SMP+ surge suppression virtually eliminates service calls.  Traditional surge suppression circuits “sacrifice” themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor.  Not so with SMP+.  With Furman’s SMP+, damaging transient voltages are safely absorbed, clamped and dissipated.  No sacrificed parts, no service calls, no down time. \u003c\/p\u003e\n\u003cp\u003eUnique to Furman’s SMP+ is its unparalleled clamping voltage (even when tested beyond the grueling specifications of - USA\/CIDA’s A-1-1 test).  While other designs offer clamping voltages that are well above 300VAC peak, (far beyond long accepted professional standards), Furman’s SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP+ technology.  Additionally, Furman’s trusted over-voltage circuitry protects against all too frequent accidental connections to 208 or 240VAC, by shutting off the incoming power until the over voltage condition is corrected.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449509113959,"sku":"31198","price":309.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl-plusc_1_bec7e82d-1240-4149-be36-f43d20366163.jpg?v=1787089255"},{"product_id":"equitech-son-of-q-jr-power-conditioner-silver","title":"Equitech Son of Q Jr. Power Conditioner - Silver","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Son of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003cdl\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e \n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449560297575,"sku":"25867","price":1650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q_2_1_f6a7b661-f116-4377-ac79-ce7c550ac440.jpg?v=1787089461"},{"product_id":"equitech-son-of-q-sr-power-conditioner-silver","title":"Equitech Son of Q Sr. Power Conditioner - Silver","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Son of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003cdl\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e \n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449560395879,"sku":"25876","price":1911.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q_3_ad4a4549-1c6e-4608-8a71-c3d0168434f9.jpg?v=1787089461"},{"product_id":"equitech-son-of-q-power-conditioner-silver","title":"Equitech Son of Q Power Conditioner - Silver","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops.\u003c\/p\u003e\n\u003cp\u003eSon of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e\n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449600110695,"sku":"25873","price":1597.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q_1_1_e7fc66d5-7176-428c-8512-389046c4761e.jpg?v=1787089636"},{"product_id":"furman-p-2400-ar-used","title":"Furman P-2400 AR (Used)","description":"Power conditioner.","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449616658535,"sku":"37847","price":1050.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_37847_1_dfc8c1b8-d393-4954-9ebe-59897a2b778b.jpg?v=1787089710"},{"product_id":"furman-merit-m-8s-power-conditioner","title":"Furman Merit M-8S Power Conditioner","description":"\u003cp\u003eThe \u003cstrong\u003eMerit M-8S Power Conditioner\u003c\/strong\u003e is the perfect low-cost AC power solution for any rack mount system. Install an M-8S in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum AC Current Rating:\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15 Amps, 120 VAC (Thermal breaker)\u003c\/li\u003e\n\u003cli\u003eAC Cord: 14AWGx3, 10 feet, black, fixed,\u003c\/li\u003e\n\u003cli\u003eNEMA 5-15P plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAC Receptacles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConvenience Outlet (Front Panel): 1 Un-switched NEMA 15-5R\u003c\/li\u003e\n\u003cli\u003eRear Panel Outlets:\u003cbr\u003e \n\u003cul\u003e\n\u003cli\u003e2 Un-switched NEMA 5-15R (1 duplex)\u003c\/li\u003e\n\u003cli\u003e6 Sequenced NEMA 5-15R (3 duplexes, each controlled by separate relay)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSurge Protection:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAC Surge Protection: Merit Class (sacrificial)\u003c\/li\u003e\n\u003cli\u003eSpike Protection Mode: Line to neutral, zero ground leakage\u003c\/li\u003e\n\u003cli\u003eMax Continuous Operating Voltage: 130V RMS\u003c\/li\u003e\n\u003cli\u003eMax Clamp Voltage: 500 Volts Peak\u003c\/li\u003e\n\u003cli\u003ePeak Impulse Current: 12,000 Amps\u003c\/li\u003e\n\u003cli\u003eEnergy Rating (2 X 820μS): 225 Joules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003eAC Filtering:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePi LCR Filter\u003c\/li\u003e\n\u003cli\u003eNoise Attenuation: \u0026gt;26dB, 100 Khz to 1 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003eOperating Temperature Range:5C (40F) to 40C (105F) degrees\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eHumidity Range:\u0026lt;90% rH (Relative Humidity)\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eUser Interface:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRocker Switch: Front panel, Sequence (ON, OFF)\u003cbr\u003e \n\u003cul\u003e\n\u003cli\u003eThermal Circuit Breaker: Front panel, push to reset\u003c\/li\u003e\n\u003cli\u003eFront panel indicators Delay 1, Delay 2, Delay 3, Power, Protection OK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl\/Status\/Triggering (Rear Panel):\u003c\/li\u003e\n\u003cli\u003eRear Panel DIP Switches: 12V Mode On\/Off,\u003cbr\u003e \n\u003cul\u003e\n\u003cli\u003eGND Mode On, Momentary\/Maintained\u003c\/li\u003e\n\u003cli\u003ePotentiometer: Rear panel, time calibration fine tune delay adjust\u003c\/li\u003e\n\u003cli\u003eRemote Terminal: +5-30VDC In, 12VDC (12mA) Out\u003c\/li\u003e\n\u003cli\u003eRemote Terminal: Phoenix type 4-Pin Connector with Screw terminals; +12V, STAT, REM, GND (Class 2 Wiring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eSize: 1.75” X 19.00” X 6.5” (HWD) – ANSI 1RU\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eMass: 5.3 lbs\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eDimensions: 8.75”D x 19”W x 1.75”H\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eWeight: 6.5 lbs\u003c\/p\u003e\n\u003cp class=\"p2\"\u003ePower Consumption (No Load): • 5 Watts\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eSafety Agency: C\/CSA\/US\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449634648167,"sku":"38579","price":438.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_m_8s_front_7cc44e34-6610-4374-a926-237b3569ae9b.jpg?v=1787089775"},{"product_id":"tonelux-psu-used","title":"Tonelux PSU (Used)","description":"Clean used Tonelux VRack PSU. Powers either 1 or 2 loaded VRacks.\u003cbr\u003e\u003cbr\u003eVK serviced.","brand":"Tonelux","offers":[{"title":"Default Title","offer_id":44449656832103,"sku":"12889","price":435.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/used_12889_1_f31d7fbb-a0b2-4cb3-9e93-e97949d4ab87.jpg?v=1787089865"},{"product_id":"equitech-son-of-q-power-conditioner-silver-demo-deal","title":"Equitech Son of Q Power Conditioner - Silver (Demo Deal)","description":"\u003cdl\u003e\n\u003cp\u003e\u003cstrong\u003eThe Son of Q\u003c\/strong\u003e is offered in 3 different sizes.  The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity.  The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen countertops.\u003c\/p\u003e\n\u003cp\u003eSon of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.  \u003c\/p\u003e\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating.  The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors 20-amp systems.  The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.  \u003c\/p\u003e\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cdl\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/dl\u003e\n\u003c\/dl\u003e\n\u003cul\u003e\n\u003cli\u003eBifilar wound isolation transformer\u003c\/li\u003e\n\u003cli\u003eMagnetic and faraday shielding\u003c\/li\u003e\n\u003cli\u003eHighly effective redundant surge protection\u003c\/li\u003e\n\u003cli\u003eDigital equipment outlets\u003c\/li\u003e\n\u003cli\u003eUnswitched outlet\u003c\/li\u003e\n\u003cli\u003e100% passive circuitry\u003c\/li\u003e\n\u003cli\u003eHigh efficiency\u003c\/li\u003e\n\u003cli\u003eANSI\/UL tested\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdl\u003e \n\u003cul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\n\u003cli\u003eTotal relative stay field: \u0026lt; 10\u003csup\u003e-3\u003c\/sup\u003e @ .1M\u003c\/li\u003e\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/dl\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449695924327,"sku":"43918","price":1495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech_son_of_q_1_1_1_c9faf248-dba5-4942-97d2-b7f165e3d465.jpg?v=1787090024"},{"product_id":"furman-pl-8c-demo-deal","title":"Furman PL-8C (Demo Deal)","description":"\u003cp\u003e\u003cspan\u003eThe Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design.  The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS).  Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e\u003cspan\u003eFurman PL-8C Applications\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eInstrument Rigs - \u003c\/span\u003e\u003c\/strong\u003eYou've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eRecording - \u003c\/span\u003e\u003c\/strong\u003eCan't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDJ Equipment - \u003c\/span\u003e\u003c\/strong\u003eBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePro Audio - \u003c\/span\u003e\u003c\/strong\u003eWhen you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449696022631,"sku":"43911","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_pl8c_1_1_eb6f84a0-fa41-4da1-a5ea-86fdf812ace1.jpg?v=1787090024"},{"product_id":"equitech-model-q-2q-power-conditioner-silver-demo-deal","title":"Equitech Model Q Power Conditioner - Black, 20 Amp, 120 V (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eEquitech Model Q Power Conditioner\u003c\/strong\u003e is ideal for recording, mixing or mastering. Low-noise in a studio equates to more clarity. Having balanced power helps your gear...no matter how much or little you own.  The Equitech Model Q supports your gear to operate at its fullest capacity. \u003c\/p\u003e\n\n\u003cp\u003eFor example, the material used in the Equitech Model Q transformer core is made of a state-of-the-art magnetic steel alloy and none is spared in fabrication.  The core material is the most efficient there is, nevertheless the Model Q transformer has twice the mass of similarly rated competitive products.  It drives amplifiers and other high current pulse type loads without skipping a beat.  Power factor remains virtually stable regardless of the type of demand load.  Mil spec oxygen free copper is used throughout the Model Q assembly to further reduce random high frequency current distortion.  This improves an already near perfect mirror image output and further widens its range of noise attenuation. The Model Q’s switches and circuit breakers are the finest made and they are duty rated for over 1\/2 million operations.\u003c\/p\u003e\n\n\u003cp\u003eOn the rear panel, there are 12 AC outlets provided... One GFCI outlet is independent from the front standby switch(s) and is constantly left turned on for use with components that require continuous power for a clock or to maintain volatile memory. Of the 10 remaining outlets, 6 (white) are for analog components such as amplifiers and pre amps and 4 (gray) are specially filtered outlets for digital components. A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_0\"\u003eHigh Power Factor\u003c\/h3\u003e\n\n\u003cp\u003eRegardless of how clean AC power provided for sensitive electronics may be, the instant that component power switches are turned on, the quality of AC power degenerates.  This is simply the nature of what are termed “non-linear reactive loads.”  When non-linear power supplies are energized, some measure of power is wasted and reflected back out onto the line.  This undesirable and noisy form of energy (harmonics) is then shared by every other component on the system.  Furthermore, voltage and current phases are knocked out of sync too and this is what is referred to as low power factor.  Electricity by its nature requires both current and voltage to be present at the same time or nothing happens.  In AC power, current and voltage must be timed together in sync or to the degree they are not, nothing happens.  As the power factor drops lower and lower, electricity thins out very much like cheaper gasoline and equipment performance suffers.  Generally speaking, the greater the load (e.g. large amplifiers) the lower the resulting power factor. \u003c\/p\u003e\n\n\u003ch3 id=\"toc_1\"\u003eUltra Low Impedance\u003c\/h3\u003e\n\n\u003cp\u003eThe ultra-low impedance design of the Model Q transformer provides unrestricted current delivery to its output and virtually busts the “myth” that transformers cannot handle high amplitude current transients demanded by amplifiers and other types of high current pulse loads.  Unlike typical transformers that are often considered to be “too current restricting” (and rightfully so,) Model Q transformers have been engineered with radical modifications made to their core and winding specifications which result in a transformer that has uncommonly low impedance and unrestricted current handling characteristics. \u003c\/p\u003e\n\n\u003ch3 id=\"toc_2\"\u003e100% Passive Circuitry\u003c\/h3\u003e\n\n\u003cp\u003eThere are no active components used in any Equitech product.  There is nothing that will degrade from heat over time or from years of rugged use.  Similar systems may use semiconductor devices to drive their outputs or soft start relays to compensate for a low quality isolation transformer with high inrush current, but not Equitech's!  There is nothing in an Equitech system to wear out over time from heavy use or from heat.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_3\"\u003eHigh Efficiency\u003c\/h3\u003e\n\n\u003cp\u003eEquitech systems are the most efficient of their kind.  This means that very little power is inefficiently wasted when powering electronic components.  Even when driven hard, they generate very little heat and they are barely warm to the touch.  They draw very little power in idle mode and can be left turned on indefinitely, ready to meet extreme power demands in an instant.  In operational mode, they waste almost no power drawing approximately what they put out. \u003c\/p\u003e\n\n\u003ch3 id=\"toc_4\"\u003eMagnetic and Faraday Shielding\u003c\/h3\u003e\n\n\u003cp\u003eThese indispensable features are included in every Equitech product.  The Faraday shields isolate noise from the outside world as well as protect the system’s output and connected load components from potentially destructive voltage spikes. The magnetic shield assures that electronics used in close proximity will be unaffected by magnetic stray field radiation.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_5\"\u003eOxygen-free copper wire\u003c\/h3\u003e\n\n\u003cp\u003eMil Spec. oxygen-free copper wire is used throughout the entire AC distribution section of every Model “Q”.  Hand-made OFC jumper wires and wiring harnesses are used exclusively in their assembly.  OFC wire reduces high frequency micro current distortion that is commonly present in conventional copper or silver wired circuits.  This further extends the effective bandwidth of noise attenuation.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_6\"\u003eFiltered Digital Equipment Outlets\u003c\/h3\u003e\n\n\u003cp\u003eThese outlets provide additional high frequency noise attenuation and isolation for switching power supplies typically found in digital electronics. \u003c\/p\u003e\n\n\u003ch3 id=\"toc_7\"\u003eUnswitched Outlet\u003c\/h3\u003e\n\n\u003cp\u003eAn entire system of components can be turned on and off from the front panel by using the front standby switch(s).\u003c\/p\u003e\n\n\u003ch3 id=\"toc_8\"\u003eQuality Tested\u003c\/h3\u003e\n\n\u003cp\u003eEquitech products have been tested and certified to meet the most rigorous and demanding of all power industry standards for Class A (high voltage) power distribution equipment.  No one other than Equitech offers a balanced power system that meets the design criteria and safety testing procedures required in this standard.  Since Equitech started the balanced power revolution in the early 90s, they remain the only balanced power manufacturer committed to meeting high performance and safety standards required by discriminating professionals in many technical fields.\u003c\/p\u003e\n\n\u003ch3 id=\"toc_9\"\u003eLifetime Warranty\u003c\/h3\u003e\n\n\u003cp\u003eOnly Equitech offers a lifetime warranty on the most expensive component and heart of the system, the power isolation transformer as long as the original chassis remains in tact - the only transferable warranty of its kind.  If for any reason (other than abuse) the transformer fails, Equitech will replace it at their expense and charge only for nominal shipping and handling cost.\u003c\/p\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449704607847,"sku":"44699","price":5269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-model-q-20_99310_1_d665f92b-e102-471e-9b37-cedf9d5bf1b3.jpg?v=1787090068"},{"product_id":"equitech-model-q-3q-power-conditioner-black-demo-deal","title":"Equitech Model Q 3Q Power Conditioner - Black (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eEquitech Model Q\u003c\/strong\u003e is Equitech's flagship product. It is the result of many years of experience and application research in the field of balanced AC power. Every component specified in its design has been selected from years of research and testing in professional and consumer high definition A\/V systems in both analog and digital formats. Each component used in the Model Q was chosen for its superior quality and performance and cost was no object. For example, the material used in the Model Q transformer core is made of a state-of-the-art magnetic steel alloy and none is spared in fabrication. The core material is the most efficient there is, nevertheless the Model Q transformer has twice the mass of similarly rated competitive products. It drives amplifiers and other high current pulse type loads without skipping a beat. Power factor remains virtually stable regardless of the type of demand load. Mil spec oxygen free copper is used throughout the Model Q assembly to further reduce random high frequency current distortion. This improves an already near perfect mirror image output and further widens its range of noise attenuation. The Model Q's switches and circuit breakers are the finest made and they are duty rated for over 1\/2 million operations.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Model Q has a simple yet elegant appearance. It features an anodized aluminum front panel that is available in black or silver. A front panel LED voltmeter indicates voltage at the input or output depending on the position of the voltmeter mode switch (In\/Off\/Out). There is one blue LED indicator light above the input power switch and one above each output standby switch indicating power status at both the input and the output. The input power LED also doubles as a TVSS status light that indicates active surge protection when lit. In the rare event that it stops working and the output LED still works, this indicates that the surge protector has taken too many nuisance voltage spikes and its days are done. In the rare event that this occurs, the Model Q's grounded Faraday shields provide excellent redundant surge protection until the TVSS module can be replaced and it is an inexpensive and easy thing to do.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOn the rear panel, there are 12 AC outlets provided (more in the larger versions). One GFCI outlet is independent from the front standby switch(es) and is constantly left turned on for use with components that require continuous power for a clock or to maintain volatile memory. Of the ten remaining outlets, six (white) are for analog components such as amplifiers and pre amps and four (gray) are specially filtered outlets for digital components. A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.\u003c\/p\u003e\r\n\r\n\u003cp\u003eModel Qs are offered in seven different sizes ranging from 1kVA to 10kVA load capacities. Most Model Q's that are rated at 2kVA or less require a 120V supply circuit to operate. 3kVA and 5kVA models require a 208 or 24V supply as do the 7.5kVA and 10kVA models.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSee attached chart (in \"Documents\" tab) for the circuit size and standard plug type for each model.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\r\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\r\n\u003cli\u003eTransformer impedance: 1.65%\u003c\/li\u003e\r\n\u003cli\u003eIsolation (CMRR): 100dB\u003c\/li\u003e\r\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\r\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 1.7%\u003c\/li\u003e\r\n\u003cli\u003eVoltmeter accuracy: +\/- .5V\u003c\/li\u003e\r\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\r\n\u003cli\u003eTotal relative strayfield: \u0026lt; 10-3 @ .1M\u003c\/li\u003e\r\n\u003cli\u003eNoise level: \u0026lt; .02 Sones @ 1M\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cem\u003e\u003cstrong style=\"color: #d89126;\"\u003ePlease note:\u003c\/strong\u003e Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.\u003c\/em\u003e\u003c\/p\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449704673383,"sku":"44700","price":4595.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-son-of-q-stock_cd0a9f9b-6848-4170-886a-730eff8e32d3.jpg?v=1787090068"},{"product_id":"furman-p-8-pro-c-demo-deal","title":"Furman P-8 PRO C (Demo Deal)","description":"\u003cp class=\"p1\"\u003eThe \u003cstrong\u003eFurman P-8 PRO C\u003c\/strong\u003e features Furman’s venerable Series Multi-Stage Protection (SMP) circuit as well as our exclusive Linear Filtering Technology (LiFT). Together, these technologies comprise what is, without question, the worlds most advanced and comprehensive transient voltage surge suppressor\/conditioner.\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eSMP+ (Series Multi-stage Protection Plus)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003eFurman’s SMP+ surge suppression virtually eliminates service calls.  Traditional surge suppression circuits “sacrifice” themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor.  With Furman’s SMP+, however, damaging transient voltages are safely absorbed, clamped and dissipated.  No sacrificed parts, no service calls, no down time.\u003cbr\u003e\u003cbr\u003eUnique to Furman’s SMP+ is its unparalleled clamping voltage.  While other designs offer clamping voltages that are well above 300Vpk, Furman’s SMP+ clamps at 188Vpk, 133 VAC RMS even when tested with multiple 6000Vpk - 3000 amp surges!  This unprecedented level of protection is only available with Furman’s SMP+ technology.  Additionally, Furman’s trusted over-voltage circuitry protects against all too frequent open neutral wiring, or accidental connections to 208 or 240 VAC. Furman’s SMP+ with over voltage protection immediately shuts off the incoming power until the over voltage condition is corrected.\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eLiFT (Linear Filtering Technology)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003eUnfortunately, traditional AC conditioners have been designed for unrealistic laboratory conditions.  Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs.  Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line!  Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground.  Furman’s SMP+ with LiFT takes another approach, ensuring optimal performance through linear fi ltering and no leakage to ground.\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003eEVS (Extreme Voltage Shutdown)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e \u003c\/strong\u003eTransient spikes and ground contamination are not the only problems faced by today’s sensitive electronics. There are also sustained over voltage conditions, sometimes called extreme voltages. Many surge suppression devices will not be able to protect equipment from sustained over voltages. These conditions can occur for multiple reasons: a power pole may be damaged during a storm or accident; or, in many countries, such as USA and Canada, lost or intermittent neutral wiring of a multiple-zone system can result in a sudden connection well in excess of 208 volts AC. Many surge suppression devices are not equipped to handle these kinds of conditions. Without proper protection, the end result is destroyed equipment or, at best, a destroyed surge suppression system.\u003c\/p\u003e\r\n\u003cp class=\"p1\" style=\"padding-left: 30px;\"\u003eFurman’s EVS constantly monitors incoming voltage, and once any overvoltage condition over 137 volts AC is detected, a relay opens which immediately shuts down the unit and all connected equipment. An indicator light informs the user there is a problem, and once the condition has been corrected, the unit may be reset and will operate normally.\u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\r\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCurrent rating: 20 Amps\u003c\/li\u003e\r\n\u003cli\u003eOperating Voltage: 90 to 140 VAC\u003c\/li\u003e\r\n\u003cli\u003eFrequency: 50\/60Hz\u003c\/li\u003e\r\n\u003cli\u003eOver Voltage Shutdown: 140 VAC typically\u003c\/li\u003e\r\n\u003cli\u003eSpike Protection Modes: Line to neutral, zero ground leakage\u003c\/li\u003e\r\n\u003cli\u003eSpike Clamping Voltage: 188 Vpk @ 3,000 Amps, (133 VAC RMS)\u003c\/li\u003e\r\n\u003cli\u003eMaximum surge current: 6,500 Amps\u003c\/li\u003e\r\n\u003cli\u003eNoise attenuation (transverse mode):\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e10 dB @ 10 kHz\u003c\/li\u003e\r\n\u003cli\u003e40 dB @ 100 kHz\u003c\/li\u003e\r\n\u003cli\u003e100 dB @ 10 MHz\u003c\/li\u003e\r\n\u003cli\u003eLinear attenuation curve from 0.05 - 100 ohms line impedance\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eMechanical Dimensions: 19” L x 10.5” D x 1.75” H\u003c\/li\u003e\r\n\u003cli\u003eWeight: 11 lbs (5 kg)\u003c\/li\u003e\r\n\u003cli\u003eConstruction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards\u003c\/li\u003e\r\n\u003cli\u003eOperating temperature range: 0°C (32°F) to 40°C (104°F)\u003c\/li\u003e\r\n\u003cli\u003eOperating humidity range: \u0026lt; 90% RH\u003c\/li\u003e\r\n\u003cli\u003ePower Consumption:12 watts\u003c\/li\u003e\r\n\u003cli\u003eSafety Agency Listings:CSA UL1449\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449720041575,"sku":"47617","price":305.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_p8proc_front_1_2_45862043-e2d4-4cce-92db-6b4fef96cfff.jpg?v=1787090125"},{"product_id":"equitech-son-of-q-power-conditioner-black-15-amp","title":"Equitech Son of Q Power Conditioner - Black, 15 Amp, 120V","description":"\u003cp\u003eThe \u003cstrong\u003eEquitech Son of Q\u003c\/strong\u003e provides world-class balanced power isolating your audio from line noise and other problems with dirty power that can affect sound quality and noise floor.\u003c\/p\u003e\r\n\u003cp\u003eSon of Q has a simple yet elegant appearance. It features an anodized aluminum front panel that is available in black. On the front panel, there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitors power status at the input and at the output of the unit. The input power LED doubles as a TVSS status light that indicates active surge protection when lit. On the back panel, there are 12 outlets provided. A GFCI outlet is independent of the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory. Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, preamps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear. A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.\u003c\/p\u003e\r\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are. There is no skimping on how Son of Qs are designed and built. Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density. This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs. Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.\u003c\/p\u003e\r\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently. The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers. The Son of Q is one of the few power products in the marketplace that routinely maintains a high power factor when used with high current pulse demand loads. It actually enhances playback quality rather than getting in the way and making an amplifier sound compressed. Son of Qs are designed to be a perfect fit in project studios and professional installations for world-class protection and sound quality.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eSon of Q Sr. Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eInput: 120 VAC\u003c\/li\u003e\r\n\u003cli\u003eOutput: 120\/60\u003c\/li\u003e\r\n\u003cli\u003eVAC Capacity: 1500\u003c\/li\u003e\r\n\u003cli\u003eVA Circuit Size: 1-15A\u003c\/li\u003e\r\n\u003cli\u003eOutlet Type: 10-15A\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449884831847,"sku":"52640","price":3050.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-son-of-q-black_52640_1_ef0a4a84-edd7-429f-91dd-9414af071982.jpg?v=1787090809"},{"product_id":"furman-p-1800-pf-r-demo-deal","title":"Furman P-1800 PF R (Demo Deal)","description":"\u003cp\u003eEngineered specifically for use with instrument amplifiers and other high-current equipment, the \u003cstrong\u003eFurman P-1800 PF R\u003c\/strong\u003e offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower Factor Technology\u003c\/strong\u003e\u003cbr\u003eYour amp needs a lot of power to sound its best. If you’re plugging into the wall, there’s a good chance your amp is not going to get the current it needs when pushed. Furman’s exclusive Power Factor Technology provides a 45A peak current reservoir to give your amp the headroom it needs to operate at maximum efficiency. No matter what venue or club, or how close or far away from the power panel, Furman’s Power Factor Technology keeps your instrument amplifier’s tone consistent and sounding it’s best.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClear Tone Technology\u003c\/strong\u003e\u003cbr\u003eClear Tone Technology works in unison with Power Factor Technology and Linear Filtering Technology to add an additional layer of AC noise filtration specifically engineered for instrument amplifiers. Clear Tone Technology provides tuned circuits that unveil instrument tone, harmonics, and clarity, resulting in a fuller sound and improved dynamic response.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449987788903,"sku":"60455","price":939.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_p-1800pfr_angle_1_dcb15680-0597-4636-9831-2ea658b374f5.jpg?v=1787091220"},{"product_id":"furman-m-8lx-demo-deal","title":"Furman M-8Lx (Demo Deal)","description":"\u003cp\u003eA Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system.  Install a \u003cspan style=\"font-weight: bold;\"\u003eFurman M-8Lx\u003c\/span\u003e into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.  The M-8Lx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eInstrument Rigs\u003c\/span\u003e\u003cbr\u003e You've got a rack for your effects, preamps, tuner...you're going to plug that into the wall?  One big spike and your rig is up in smoke.  Furman's standard level surge\/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots.  With Furman's standard level RFI\/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eRecording\u003c\/span\u003e\u003cbr\u003e Can't track down where that noise is coming from?  Your mix sounding flat?  With Furman's standard level RFI\/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW.  Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges.  With a 15A capacity and nine total outlets, it's enough to power your whole home studio.\u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-weight: bold;\"\u003eDJ Equipment\u003c\/span\u003e\u003cbr\u003e Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig.  Furman's standard level protection and filtration keeps the bad stuff out.\u003cbr\u003e \u003cbr style=\"font-weight: bold;\"\u003e \u003cspan style=\"font-weight: bold;\"\u003ePro Audio\u003c\/span\u003e\u003cbr\u003e When you're out there gigging, you never know what kind of power you're going to get.  The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI\/EMI filtration.  It keeps your equipment safe and sounding clean.  Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44449992573031,"sku":"61854","price":189.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman_m8lx_1_1_2798e101-d487-48d9-bc94-f9053e70eed6.jpg?v=1787091239"},{"product_id":"equitech-son-of-q-sr-power-conditioner-s-006607-used","title":"Equitech Son of Q Sr. Power Conditioner #S-006607 (Used)","description":"Like father, like son, sometimes the apple doesn't fall far from the tree. Akin to the Model Q, there is something unique about the \u003cstrong\u003eEquitech Son of Q \u003c\/strong\u003e that distinguishes it from all the rest of the power products on the market. In a recording environment, the most obvious difference is an extremely low noise floor that permits hotter tracking across the board. To a professional, capturing low level detail is essential to create a live environment and add excitement to the mix. (Often they pay for themselves in downtime saved from troubleshooting noise gremlins in the studio.) Because of a substantially lower noise floor, mikes can be tracked much hotter without annoying noise or hiss to mask detail in low level signals. Outboard racks run \"quiet as a clam\" (to quote Mr. Roger Nichols) and musician's racks almost never bring noise into the studio. These systems have been measured to reduce digital jitter by as much as 67% which is unheard of in any digital environment without balanced power. The only thing better for mastering is the Model Q for hearing a full range mix, but compared to mixing without one, the difference in fidelity with a Son of Q is astonishing. The Son of Q is a highly cost effective rack unit used by numerous professional engineers in pro-tools studios. (\"I refuse to work in a studio without one.\" states Mr. Nichols.) \u003cbr\u003e\u003cbr\u003e The Son is offered in 3 different sizes. The original Son of Q model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet as does it's smaller sibling, the Son of Q Jr., which has a 1000 Watt AC load capacity. The largest of the three, the Son of Q Sr. can drive 2000 Watts of load but it requires a full sized 20-amp outlet such as the kind found near most modern kitchen counter tops. They run silently emitting no audible noise. They run luke water warm at the most when loaded up to full capacity. The entire Son of Q line has been thoughtfully designed with many years of balanced power manufacturing experience behind them. They are the new generation of standard systems that we build, refined beyond any product that we have ever offered in their price range. \u003cbr\u003e\u003cbr\u003e Son of Qs have a simple yet elegant appearance. They feature an anodized aluminum front panel that is available in black or silver. On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit. The input power LED doubles as a TVSS status light that indicates active surge protection when lit. On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired. In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced. On the back panel, there are 12 outlets provided. A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory. Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear. (Simple plug strips can be added to rack rails by the dozen.) A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment. \u003cbr\u003e\u003cbr\u003e Open the lid on a Son of Q and see for yourself how well made these systems truly are. There is no skimping on how Son of Qs are designed and built. All three models use isolation transformers with an enormous mass that rival competitors' products with twice the current rating. The Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to our competitors' 20-amp systems. The Jr.'s heart is massive but the Son of Q Sr. is nearly twice the size. Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density. This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs. Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines. \u003cbr\u003e\u003cbr\u003e Most of today's project recording studios do not require a high level of continuous current to operate efficiently. The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers. The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads. They actually enhance playback quality rather than get in the way and make an amplifier sound compressed. Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps).","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44449999716455,"sku":"60147","price":995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-son-of-q-sr.-power-conditioner-s-006607-used-6539270_f457ee16-cbb0-4317-8948-ff0f925a8eb0.jpg?v=1787091268"},{"product_id":"equitech-son-of-q-power-conditioner-15-amp-demo-deal","title":"Equitech Son of Q Power Conditioner - 15 Amp (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eEquitech Son of Q\u003c\/strong\u003e model has a 1500 Watt capacity and plugs into any standard 15-amp 120-volt wall outlet, providing world class balanced power isolating your audio from line noise and other problems with dirty power that can effect sound quality and noise floor.\u003c\/p\u003e\r\n\r\n\u003cp\u003eSon of Q has a simple yet elegant appearance.  It features an anodized aluminum front panel that is available in black.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.   On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are.  There is no skimping on how Son of Qs are designed and built.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.\u003c\/p\u003e\r\n\r\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Q is one of the few power products in the marketplace that routinely maintains a high power factor when used with high current pulse demand loads.  It actually enhances playback quality rather than getting in the way and making an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios and professional installations for world class protection and sound quality.\u003c\/p\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44450000371815,"sku":"62471","price":2369.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-son-of-q-black_52640_1_1_59efff07-215e-4635-8768-9a79770baeca.jpg?v=1787091270"},{"product_id":"equitech-son-of-q-sr-power-conditioner-black-20-amp","title":"Equitech Son of Q Sr. Power Conditioner - Black, 20 Amp","description":"\u003cp\u003eThe \u003cstrong\u003eEquitech Son of Q Sr.\u003c\/strong\u003e provides world-class balanced power isolating your audio from line noise and other problems with dirty power that can affect sound quality and noise floor.\u003c\/p\u003e\r\n\u003cp\u003eSon of Q has a simple yet elegant appearance. It features an anodized aluminum front panel that is available in black. On the front panel, there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitors power status at the input and at the output of the unit. The input power LED doubles as a TVSS status light that indicates active surge protection when lit. On the back panel, there are 12 outlets provided. A GFCI outlet is independent of the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory. Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, preamps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear. A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.\u003c\/p\u003e\r\n\u003cp\u003eOpen the lid on a Son of Q and see for yourself how well made these systems truly are. There is no skimping on how Son of Qs are designed and built. Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density. This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs. Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.\u003c\/p\u003e\r\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently. The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers. The Son of Q is one of the few power products in the marketplace that routinely maintains a high power factor when used with high current pulse demand loads. It actually enhances playback quality rather than getting in the way and making an amplifier sound compressed. Son of Qs are designed to be a perfect fit in project studios and professional installations for world-class protection and sound quality.\u003c\/p\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eInput: 120 VAC\u003c\/li\u003e\r\n\u003cli\u003eOutput: 120\/60\u003c\/li\u003e\r\n\u003cli\u003eVAC Capacity: 2000\u003c\/li\u003e\r\n\u003cli\u003eVA Circuit Size: 1-20A\u003c\/li\u003e\r\n\u003cli\u003eOutlet Type: 10-15A, 2-20A\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44450167914599,"sku":"61876","price":3650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-son-of-q-sr_61876_1_e1e3515e-91ec-4512-bcbc-a09ff84fc7ad.jpg?v=1787091959"},{"product_id":"equitech-son-of-q-jr-power-conditioner-black-10-amp","title":"Equitech Son of Q Jr. Power Conditioner - Black, 10 Amp","description":"\u003cp\u003eThe \u003cstrong\u003eEquitech Son of Q Jr. Power Conditioner\u003c\/strong\u003e, is capable of a 1000 Watt AC load capacity. Son of Qs have a simple yet elegant appearance.  They feature an anodized aluminum front panel that is available in black or silver.  On the front panel there are 2 LED indicator lights, one above the input power switch and one above the output standby switch that monitor power status at the input and at the output of the unit.  The input power LED doubles as a TVSS status light that indicates active surge protection when lit.  On rare occasion if it stops working and the output light still works, that means that the surge protector has taken a big hit and expired.  In the rare event that this happens, the Son of Q transformer's grounded Faraday shield maintains excellent backup surge protection until the TVSS can be replaced.  On the back panel, there are 12 outlets provided.  A GFCI outlet is independent from the front standby switch and is constantly left turned on for use with components that require continuous power for a clock or to maintain memory.  Of the 10 remaining outlets, 6 (white) are for analog components such as self-powered monitors, amplifiers, pre amps, crossovers etc. and 4 (gray) are specially filtered outlets for digital gear.  A circuit breaker on the rear panel protects the system from overload and from potential short circuit fire hazards in electrical power cords and downstream connected equipment.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Son of Q Jr. is modestly rated at 1000 Watts with a transformer that compares to competitors' 20-amp systems.  Son of Q transformers are designed to operate with an extremely low impedance and a very low magnetic flux density.  This means that under load, they operate with a lot of magnetic headroom left in reserve and they can transfer current quickly upon demand to amplifier power supplies when a large transient occurs.  Their magnetic shields allow for use near sensitive equipment such as single-coil pickups and tape machines.\u003c\/p\u003e\r\n\r\n\u003cp\u003eMost of today's project recording studios do not require a high level of continuous current to operate efficiently.  The power supplies simply do not have the mass and size that require a constant high current power source but at times they do demand high current in short bursts, especially class AB monitor amps and self-powered speakers.  The Son of Qs like the Model Qs are one of the few power products in the marketplace that routinely maintain a high power factor when used with high current pulse demand loads.  They actually enhance playback quality rather than get in the way and make an amplifier sound compressed.  Son of Qs are designed to be a perfect fit in project studios with small to medium sized boards, an outboard rack or two, a keyboard setup and self-powered monitors (or modestly sized monitor amps.)  Like the Model Q, their performance specifications are rated for top engineers and professionals in the industry but their price is more affordable.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eNominal input voltage: 120 VAC\u003c\/li\u003e\r\n\u003cli\u003eNominal output voltage: 120 VAC\u003c\/li\u003e\r\n\u003cli\u003eTransformer Impedance: 2.8%\u003c\/li\u003e\r\n\u003cli\u003eIsolation (CMRR): 100 dB\u003c\/li\u003e\r\n\u003cli\u003eTVSS: 240 Joules\u003c\/li\u003e\r\n\u003cli\u003eVoltage regulation (NLA\/FLA): +\/- 2.5%\u003c\/li\u003e\r\n\u003cli\u003eMax. temperature rise (at perimeter): 82° F (28° C)\u003c\/li\u003e\r\n\u003cli\u003eTotal relative stay field: \u0026lt; 10-3 @ .1M\u003c\/li\u003e\r\n\u003cli\u003eNoise level: \u0026lt; .1 Sones @ 1M\u003c\/li\u003e\r\n\u003cli\u003eEMI\/RFI Filter: -30 dB \u0026gt; 100 kHz\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Equitech","offers":[{"title":"Default Title","offer_id":44450167980135,"sku":"80230","price":1650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/equitech-son-of-q-jr_80230_1_37ad9266-c5fa-4596-aaf4-b96240f82f03.jpg?v=1787091959"},{"product_id":"furman-m-8x-ar-15-amp-voltage-regulator","title":"Furman M-8x AR 15 Amp Voltage Regulator","description":"\u003cp\u003eThe \u003cstrong\u003eFurman M-8x AR Voltage Regulator\u003c\/strong\u003e is intended to protect sensitive electronic equipment from problems caused by AC line voltage irregularities such as brownouts, sags, and over-voltage conditions. Such irregularities can cause audio tonal changes, digital equipment malfunctions (such as loss of MIDI programs or other data), or in extreme cases, permanent damage.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eVoltage Regulation\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe AC line voltage is a number representing the nominal electrical potential that has been adopted in a region for powering electrical equipment of all kinds. In most of North America the line voltage is 120VAC. The actual voltage can fall below or rise above this nominal level due to brownouts, power cutbacks, use of substandard wiring, and other causes. These deviations can cause poor performance or a malfunction. A voltage regulator is a device which, through use of an autotransformer, corrects for deviations in line voltage by switching transformer taps such that the output voltage is at or near the nominal AC line voltage level.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eSpike (also called surges or transients)\u003c\/h3\u003e\r\n\r\n\u003cp\u003eSpikes can have voltages as high as 6000 volts. Though they are usually of very short duration, the energy they contain can be considerable and enough to damage sensitive solid-state components in audio and computer equipment. Spikes can also foul switch contacts and degrade wiring insulation. They are an unavoidable component of electric power. They are caused unpredictably by electric motors switching on or off (on the premises or outside), utility company maintenance operations, nearby lightning strikes, and other factors. Spikes are absorbed by special components called MOV's inside the M-8x AR to provide safe voltage levels to protect your equipment.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eRFI\/EMI Interference\u003c\/h3\u003e\r\n\r\n\u003cp\u003eNoise from RFI (Radio Frequency Interference) or EMI (Electro Magnetic Interference) involves lower voltages and less energy than is found in spikes, but it is continuous or transient. It is not likely to cause physical damage, but it can certainly be annoying, producing static in audio circuits, \"snow\" on video screens, or garbled data in computers. Noise can be introduced into AC lines by nearby radio transmitters, certain kinds of lighting, electric motors, and other devices. Because RFI\/EMI noise occurs at higher frequencies than the 50 or 60 Hz AC line, it can be effectively reduced through the use of low-pass filtering.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eExtreme Voltage Protection\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe M-8x AR includes special circuitry to sense over and under voltage conditions and either regulate or disable the output before damage can be done to connected equipment. Please refer to the specifications for the exact voltages at which shutdown occurs. When the input voltage falls outside the regulation limit, the power will cut off. Power will automatically be restored when the condition has subsided. The two red LEDs labeled \"EVS\" indicate a protective shutdown condition.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eExtreme Current Protection\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe M-8x AR includes a special ECS circuit to detect an extreme over-current condition and shut down the outlets before damage is done to the M-8x AR or your connected equipment. The ECS circuit has been designed to detect high speed and high level currents and will ignore low speed \/ low current transients, such as amplifier inrush currents. When an ECS condition has been detected, the M-8x AR will shut down outlets and illuminate the red Extreme Current LED.\u003c\/p\u003e","brand":"Furman","offers":[{"title":"Default Title","offer_id":44450188263527,"sku":"43896","price":765.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/furman-m-8x-ar-15_43896_1_734d948e-2b19-4800-a445-14ebef93debc.jpg?v=1787092044"},{"product_id":"chandler-psu-1-000856-tg-ltd-germanium-series-used","title":"Chandler PSU-1 #000856 (TG, LTD, Germanium Series) (Used)","description":"You can use up to 2x Chandler units per PSU-1.","brand":"Chandler Limited","offers":[{"title":"Default Title","offer_id":44450189934695,"sku":"89685","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/chandler-psu-1-000856-tg_2C-ltd_2C-germanium-series-used_89685_1_11aef8d1-0961-4e5f-bc2b-9cbcbd2363ac.jpg?v=1787092052"}],"url":"https:\/\/vintageking1.myshopify.com\/collections\/tools-accessories-recording-accessories-electrical-power-conditioners.oembed","provider":"VINTAGE KING AUDIO","version":"1.0","type":"link"}